07890 AF 100 2-1/2NX60YD UL 181B-FX LSTD
Item #:
83413809
Product Info
07890
SHURTAPE
07890 AF 100 2-1/2NX60YD UL 181B-FX LSTD
Shurtape 155206 AF 100 UL 181B-FX Listed Tape 2-1/2 in x 60 yd UL 181A-P/B-FX Listed Aluminum Foil; 4.2 mils linered acrylic-based adhesive tested in accordance with UL 723 Silver; 16RL/CS 12CS/TIER 36CS/PLT
AF 100 UL 181A-P/B-FX Listed/Printed Aluminum Foil Tape
UL 181A-P/B-FX Listed aluminum foil HVAC tape for joining and sealing joints, connections and seams on rigid fiberglass ductboard and flexible air duct. A tape that "does it all," AF 100 is engineered to form airtight bonds on joints and seams in temperatures ranging from -20 F to 260 F and in humid conditions to deliver full system closure. As a UL 181A-P listed product, AF 100 can be used in place of a mechanical fastener on rigid ductboard. Looking for a smooth start for a fast finish? Check out AF 100 with EasyPEEL® split liner technology – it’s easy to start, even with gloves on.
Features & Benefits
- UL 181A-P/B-FX listed and printed aluminum foil tape
- Linered
- Excellent adhesion to rigid fiberglass ductboard and flexible air duct
- Flexible and easy to use to create airtight bonds
- Superior stability during extreme fluctuations in temperature
Typical Applications
- For joining and sealing joints, connections and seams on rigid fiberglass ductboard and flexible air duct
- Used when repairing metal and sheet metal
- Furnace installation and replacement
- Temporary fixes/repairs for outdoor electrical boxes
- Sheet metal ventilation fan exhaust ductwork and dryer vents
- Bath fan installs and replacements
Construction
- Backing: 2 mil, dead-soft aluminum foil
- Adhesive: Acrylic-based adhesive
- Liner: Non-contaminating, siliconized, flat, white, paper release liner
Properties & Technical Data
Property | Standard | Metric |
---|---|---|
Adhesion to Stainless Steel | 70 oz/in width | 7.66 N/10 mm |
Elongation | 2% | 2% |
Service Temperature Range | -20 F to 260 F | -29 C to 127 C |
Tensile | 25 lbs/in width | 43.8 N/10 mm |
Thickness - With Liner | 6.8 mils | 0.17 mm |
Thickness - Without Liner | 4.2 mils | 0.11 mm |
Applicable Standards
UL 181A-P, UL 181B-FX, UL Listed, FSI 25/SDI 50, UL 723
Call for Pricing
NOT IN STOCK
UOM : CS (16 RL)
QTY: