Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > LOCK PARTS / ACCESSORIES
Choose a sub category:
KEYING KITS- KEYING KITS-KWIKSET KEYING KITS-SCHLAGE
KEYING PARTS-KWIKSET LATCHBOLTS-MINTCRAFT LATCHBOLTS-KWIKSET
LATCHBOLTS-SCHLAGE LATCHBOLTS-MISC STRIKE PLATES-MINTCRAFT
STRIKE PLATES-KWIKSET MISC LOCK PARTS LOCK INSTALLATION TEMPLATES
Sort By:
1
National Hardware MP3230B Wire Cable Clamp National Hardware MP3230B Wire Cable Clamp Cambell T7670409 Wire Rope Clip
National Hardware Wire Cable Clamp, Series: MP3230B, 1/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Wire Cable Clamp, Series: MP3230B, 1/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware MP3230B Wire Cable Clamp Cambell T7670429 Wire Rope Clip DOOR KEY EMERGENCY
National Hardware Wire Cable Clamp, Series: MP3230B, 3/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use.
National Hardware MP3230B Wire Cable Clamp Cambell T7670439 Wire Rope Clip Campbell T7670629 Wire Rope Thimble
National Hardware Wire Cable Clamp, Series: MP3230B, 1/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 1 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware MP3230BC Wire Cable Clamp National Hardware 3232BC Rope Thimble National Hardware 3232BC Rope Thimble
National Hardware Wire Cable Clamp, Series: MP3230BC, 5/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an eye or Loop on Wire Rope National Hardware Rope Thimble, Series: 3232BC, 1/8 in Size, Cold Rolled Steel, Zinc Plated, Gray National Hardware Rope Thimble, Series: 3232BC, 3/16 in Size, Cold Rolled Steel, Zinc Plated, Gray
National Hardware 3232BC Rope Thimble CLAMP CABLE SS 1/8IN          National Hardware 3232BC Rope Thimble
National Hardware Rope Thimble, Series: 3232BC, 1/4 in Size, Cold Rolled Steel, Zinc Plated, Gray Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. National Hardware Rope Thimble, Series: 3232BC, 5/16 in Size, Cold Rolled Steel, Zinc Plated, Gray
Cambell T7670449 Wire Rope Clip THIMBLE WIRE CBL ZN PLT 3/8IN National Hardware MP3230B Wire Cable Clamp
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. National Hardware Wire Cable Clamp, Series: MP3230B, 3/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 5 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Cambell T7670459 Wire Rope Clip CLAMP CABLE SS 3/16IN         FERRULE /TOOL ALUM 1/16IN
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE /TOOL ALUM 3/32IN     Kwikset 81829-001 6-Way Round Face Plain Latch Collar CABLE CLAMP WIRE SS 1/16
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Kwikset Latch Collar, 6-Way, Round Face, Plain For use with wire cable.
FERRULE /TOOL ALUM 1/8IN      FERRULE/TOOL ALUMINUM 1/16IN  FERRULE/TOOL ALUMINUM 1/8IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE/TOOL ALUMINUM 3/32IN  FERRULE/TOOL ALUMINUM 5/32IN  National Hardware 3232BC Rope Thimble
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. National Hardware Rope Thimble, Series: 3232BC, 1/2 in Size, Cold Rolled Steel, Zinc Plated, Gray
CABLE FERRULES-STOP 1/16      FERRULE/TOOL ALUMINUM 3/16IN  Campbell B767-5314 Cable Ferrule/Stop
(2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
FERRULE /TOOL ALUM 5/32IN     National Hardware MP3230B Wire Cable Clamp FERRULE /TOOL ALUM 3/16IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. National Hardware Wire Cable Clamp, Series: MP3230B, 1/2 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
Campbell B7675324 Cable Ferrule/Stop Kwikset 7615 Titan Rekeying Tool Cambell T7670479 Wire Rope Clip
(2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Kwikset 6 pin control key blank; the "Titan" control key allows removal of cylinder without dismantling lock. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
CLAMP CABLE SS 1/8IN          Baron C-260-1/8 Wire Rope Clip CLAMP CABLE SS 3/16IN
CABLE CLAMPS 1/8IN SS
Our Price: $2.57
CABLE CLAMPS 3/16IN SS
Our Price: $2.77
Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Baron Wire Rope Clip, 1/8 in Opening, Malleable Iron, Galvanized Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
Cambell T7670489 Wire Rope Clip Campbell B7675344/B7675444 Cable Ferrules and Stops Set Koch 143121 Wire Rope Clip
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. U-bolts with saddles and bolts on either side. Pack includes 3 rope clips and a thimble.
Kwikset 81467 Lock Cylinder Remover CABLE CLAMP WIRE SS 1/8       Baron C-260-3/16 Wire Rope Clip
Commonly referred to as "Pickle Fork." Use for servicing cylinders. For use with wire cable. Baron Wire Rope Clip, 3/16 in Opening, Malleable Iron, Galvanized
National Hardware MP3230B Wire Cable Clamp National Hardware 3232BC Rope Thimble CABLE CLAMP WIRE SS 3/16
National Hardware Wire Cable Clamp, Series: MP3230B, 5/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 4 in Width, 6 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Rope Thimble, Series: 3232BC, 5/8 in Size, Cold Rolled Steel, Zinc Plated, Gray For use with wire cable.
Kwikset 3437 3CP Rectangular Latch Strike Plate Baron C-260-1/4 Wire Rope Clip Koch 143161 Wire Rope Clip
Standard on non-U.L. locksets. Full lip square corner. 2-1/4"H, 1-5/8"CTC. Baron Wire Rope Clip, 1/4 in Opening, Malleable Iron, Galvanized U-bolts with saddles and bolts on either side. Pack includes 3 rope clips and a thimble.
Cambell T7670499 Wire Rope Clip FERRULE /TOOL ALUM 1/4IN      Kwikset 81845-001 6-Way Plain Latch Service Kit
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Interchangeable face places - round corner, square corner and drive-in.
CLAMP CABLE SS 1/4IN          CLAMP CABLE SS 1/4IN          FERRULE/TOOL ALUMINUM 1/4IN
CABLE CLAMPS 1/4IN SS
Our Price: $3.44
Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
CABLE CLAMP WIRE SS 1/4       Titan 18-32223CP Deadbolt T Strike National Hardware MP3230BC Wire Cable Clamp
For use with wire cable. For the Maximum Security deadbolts. Standard on Nos.780 and 785. 1-3/4" inner CTC, 3" outer CTC. 3-5/8"H x 1-1/4"W. 3-hour fire rating with U.L. Titan and 1-1/2 hour fire rating with U.L. Kwikset locks and latch bolts. National Hardware Wire Cable Clamp, Series: MP3230BC, 3/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Kwikset 81844-001 6-Way Dead Latch Service Kit THIMBLE WIRE CBL ZN PLT 3/4IN CABLE CLAMP WIRE SS 5/16
Interchangeable face places - round corner, square corner and drive-in. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. For use with wire cable.
BAR PLASTIC FOLLOWER PLUG     T-STRIKE PLATE GRADE 2 1PC    Campbell B7675354/B7675454 Cable Ferrules and Stops Set
Allows you to remove the cylinder plug from all Schlage pin and tumbler keyed products without losing the top pins and springs during the re-keying process. T-strikes with full lip. 2-3/4" x 1-1/8" square corner. For Commercial Grade 2 Latches. ANSI TMS STRIKE. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
CABLE CLAMP WIRE SS 3/8       STRIKE ASA                    Prime Line E 2281 Replacement Passage Door Spring Latch
STRIKE ASA
Our Price: $6.25
For use with wire cable. Strike plate for interior or exterior metal frame doors; commercial grade; 1-1/4" x 4-7/8" square corners. Square corner faceplate.Works with a 5/16" Star drive. Used on old style passage door locksets. Includes 1 latch and 1 set of installation screws. 1-1/32" x 2-1/4".
CLAMP CABLE ZINC PLATED 1IN   National Hardware V4230 Weather Resistant Wire Cable Clamp CABLE CLAMP WIRE SS 1/2
CABLE CLAMPS 1IN ZN PLT
Our Price: $6.59
CABLE CLAMPS 5/16IN SS
Our Price: $6.75
Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 5/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope For use with wire cable.
National Hardware 3213BC Single Pulley Cambell T7670419 Wire Rope Clip ASA STRIKE PLATE GRADE 2 1PC
PULLEYS 1-1/2IN ZN PLT
Our Price: $7.12
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Do Not use on coated cable; if used on coated cable, remove coating from assembly area. T-strikes with full lip. 2-3/4" x 1-1/8" square corner. For Commercial Grade 2 Latches. ANSI TMS STRIKE.
Kwikset 81846-001 6-Way Adjustable Dead Latch Core National Hardware 3211BC Single Pulley Campbell T7670659 Wire Rope Thimble
PULLEYS 1-1/2IN ZN PLT
Our Price: $8.03
Steel adjustable deadlatch core for Kwikset Security, Maximum Security, Ultramax Security entry knobs and levers. National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware V4230 Weather Resistant Wire Cable Clamp Campbell T7670609 Wire Rope Thimble Kwikset 81826-001 6-Way Adjustable Plain Handle Latch
CABLE CLAMPS 3/16IN SS
Our Price: $8.18
National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Steel adjustable plain latch with round corner, square corner, & drive-in face plates for Kwikset passage knobs and levers.
Kwikset 81825-001 6-Way Adjustable Dead Bolt Latch National Hardware 3221BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 2IN ZN PLT
Our Price: $8.72
CABLE CLAMPS 3/8IN SS
Our Price: $8.98
Steel adjustable deadlatch with round corner, square corner, & drive-in face plates for Kwikset Security, Maximum Security, Ultramax Security entry knobs and levers. National Hardware Single Pulley, Series: 3221BC, 3/8 in Maximum Cable, 100 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, 0.39 in Diameter Groove, 2.61 in Overall Height, 2.63 in Overall Width, Joist Mounting, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3213BC Single Pulley National Hardware 3219BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 2IN ZN PLT
Our Price: $9.16
PULLEYS 1-1/2IN ZN PLT
Our Price: $9.48
CABLE CLAMPS 1/4IN SS
Our Price: $9.52
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1-1/2 in Sheave Width, 0.39 in Diameter Groove, 2.77 in Overall Height, 2.23 in Overall Width, Wall, Ceiling Mounting, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/4 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
Campbell T7670619 Wire Rope Thimble National Hardware V4230 Weather Resistant Wire Cable Clamp Schlage 40-251 Dead Bolt Latch
CABLE CLAMPS 1/2IN SS
Our Price: $10.09
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/2 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope For exterior doors. Replaces 3 different latches. Faceplate options square and round corners or circular drive-in. Circular drive-in option requires 1" bore, standard. Fits 2-3/8" or 2-3/4" backsets housing diameter 7/8".
National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
CABLE CLAMPS 1/16IN SS
Our Price: $10.28
National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
Cambell 7670704/52333 Cable Ferrule National Hardware 3211BC Single Pulley PULLEY ZINC PLATED 2IN
PULLEYS 2IN ZN PLT
Our Price: $10.31
PULLEYS 2IN ZN PLT
Our Price: $10.38
Extruded constrution. Used for creating eye terminations on cable or wire rope. National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.95 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2 in Sheave Width, 3-1/4 in Side Plate Length, 1 Grooves, 0.39 in Groove, 2-1/2 in Overall Width, Wall/Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Zinc Plated, For Use With Rope or Cord in Indoor and Outdoor Applications
LATCH DEADLOCK GRADE 2 2-3/8IN LATCH SPRING GRADE 2 2-3/8IN  National Hardware V4230 Weather Resistant Wire Cable Clamp
CABLE CLAMPS 1/8IN SS
Our Price: $10.96
Cylindrical deadlocking latch with 1/2" throw; U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. 1-1/8 x 2-1/4 faceplate. Cylindrical spring latch with 1/2" throw; U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. 1-1/8 x 2-1/4 Faceplate National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3213BC Single Pulley Deuer DB15G Fixed Eye Gable Block Cambell 7670714/ACSL-3250 Cable Ferrule
PULLEYS 2-1/2IN ZN PLT
Our Price: $11.09
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.64 in Outer Diameter, 2-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope.
National Hardware 3213BC Single Pulley National Hardware 3211BC Single Pulley Campbell T7670639 Wire Rope Thimble
PULLEYS 3IN ZN PLT
Our Price: $11.91
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.01
National Hardware Single Pulley, Series: 3213BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Fixed Eye Connection, 0.68 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.63 in Outer Diameter, 2-1/2 in Sheave Width, Swivel Eye Connection, 3.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, 4.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
PULLEY ZINC PLATED 2-1/2IN    Deuer DB15E Swivel Eye Cable Block Mintcraft KC60B-L72V24 Cylindrical Square Corner Dead Bolt Latch
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.78
National Hardware Scissor Hook Single Pulley, Series: 3217BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2-1/2 in Sheave Width, 3.11 in Side Plate Length, 0.76 in Eye Diameter, 1 Grooves, 0.39 in Groove, 6.35 in Overall Height, 2.63 in Overall Width, Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Nickel Plated, For Use With Rope or Cord in Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Cylindrical deadlocking latch with 1/2" throw; U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. 1-1/8 x 2-1/4 faceplate.
LATCH DEADLOCK GRADE 2 2-3/4IN LATCH MORTISE-IN 2-3/8IN BCKST PLUG FOLLOWER
Cylindrical deadlocking latch with 1/2" throw; U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. 1-1/8 x 2-1/4 faceplate. Full 1" throw, solid brass with hardened steel rod insert. U.L. Approved 3-Hour Fire Rating, ANSI Grade 2. Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug.
National Hardware 3211BC Single Pulley National Hardware 3223BC Latching Swivel Hook Single Pulley LATCHBOLT UNGUARDED 2-3/8IN
PULLEYS 3IN ZN PLT
Our Price: $13.14
PULLEYS 2IN ZN PLT
Our Price: $13.36
National Hardware Single Pulley, Series: 3211BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.4 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, 5.19 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Latching Swivel Hook, Series: 3223BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 6.49 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18 Unguarded Latch - For passage and privacy locksets; SV series standard duty cylindrical knob and SK series lever locksets; the square face latch bolt has a 2-3/8" backset; UL listed for "A label" single swing doors.
LATCHBOLT GUARDED 2-3/8IN     Campbell T7670649 Wire Rope Thimble Campbell T7670669 Wire Rope Thimble
LATCHBOLT GUARDED 2-3/8IN
Our Price: $13.38
Guarded Latch - For entry, storeroom and classroom locksets; Grade 2 with a 1/2" throw and a 2-3/8" backset; UL listed with a dead lasting function. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Kwikset 83262-001 Re Keying Kit Deuer DB20G Fixed Eye Gable Block Kwikset 3014 Drive-In Square Corner Dead Bolt Latch
SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. 1"W x 2-1/4"H front. For Kwikset applications. May also be used in place of a plain latch for applications requiring this backset. Polished brass finish.
Cambell 7670724/52337 Cable Ferrule KEY GAUGE STEEL               Deuer DB20HS Swivel Eye Scissor Hook Block
Extruded constrution. Used for creating eye terminations on cable or wire rope. Designed to measure the key cuts on any Schlage key (Except SFIC) to determine what size pins should go in each chamber of the plug for re-keying purposes. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB20E Swivel Eye Cable Block National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $16.24
PULLEYS 3IN ZN PLT
Our Price: $16.24
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
Deuer DB25HS Swivel Eye Scissor Hook Block Deuer DB25G Fixed Eye Gable Block Deuer DB25E Swivel Eye Cable Block
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Baron 260-7/8 Wire Rope Clip Deuer DB30E Swivel Eye Cable Block Deuer DB30G Fixed Eye Gable Block
Baron Wire Rope Clip, 7/8 in Opening, Malleable Iron, Galvanized Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB30HS Swivel Eye Scissor Hook Block TOP PIN STANDARD KEY          KEY BALLS PROTECTO
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Kwikset Top Pin, Regular, Standard, 0.18 in Length Kwikset Key Ball, Steel
LOCK BOTTOM PIN 1             LOCK BOTTOM PIN 2             LOCK BOTTOM PIN 3
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 4             LOCK BOTTOM PIN 5             LOCK BOTTOM PIN 6
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 5, 0.264 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 6, 0.287 in Length, Gold, For Interior Doors
LOCK MASTER PIN 1             LOCK MASTER PIN 2             LOCK MASTER PIN 3
Cylinder pins. Cylinder pins. Cylinder pins.
LOCK MASTER PIN 4             LOCK MASTER PIN 5             LOCK TOP PIN
Cylinder pins. Cylinder pins. Kwikset Lock Top Pin, 0.16 in Length, Brass
LOCK MASTER PIN 6             LOCK TUMBLER SPRING           MASTER PIN NUM 2 PIN/TMBLR KYD
Cylinder pins. Replacement for Kwikset locks. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 3 PIN/TMBLR KYD MASTER PIN NUM 4 PIN/TMBLR KYD MASTER PIN NUM 5 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 6 PIN/TMBLR KYD MASTER PIN NUM 7 PIN/TMBLR KYD MASTER PIN NUM 8 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 9 PIN/TMBLR KYD KEY PIN BOTTOM PIN TMBLER# 0  KEY PIN BOTTOM PIN TMBLER# 1
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 2  KEY PIN BOTTOM PIN TMBLER# 3  KEY PIN BOTTOM PIN TMBLER# 4
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 5  KEY PIN BOTTOM PIN TMBLER# 6  KEY PIN BOTTOM PIN TMBLER# 7
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 8  KEY PIN BOTTOM PIN TMBLER# 9  TUMBLER KEY TOP PIN BB #1PIN
Door hardware parts. Door hardware parts. Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack.
TUMBLER KEY TOP PIN BB #2PIN  National Hardware V3225 Single Pulley Block and Tackle Set Baron 260-1 Wire Rope Clip
PULLEYS 2IN ZN PLT
Our Price: $24.16
Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack. National Hardware Single Pulley Block and Tackle Set, Series: V3225, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 6.23 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Baron Wire Rope Clip, 1 in Opening, Malleable Iron, Galvanized
Deuer DB35G Fixed Eye Gable Block Cambell 7670744/52338 Cable Ferrule BALL BEARINGS
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope. Ball bearing const cores. Pack of 1,000.
Porter-Cable 59375 Strike and Latch Template Smart Key 83260-001 Reset Cradle Deuer DB35E Swivel Eye Cable Block
Fast routing of strike and latch plates. Includes high-speed steel router bit No.43670. Will route the following sizes: Strike plates; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4" and 1-1/2" x 2-3/4". Latch plate: 1" x 2-1/4", 1-1/8" x 2-1/4" and 1-1/8" x 2-3/4". A tool for resetting the SmartKey cylinder if it has been improperly programmed. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB35HS Swivel Eye Scissor Hook Block RETAINER CAP REMOVAL TOOL     Kwikset 81847-001 6-Way Adjustable Plain Latch Core
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Designed to all you to remove the rear cap from Schlage deadbolt pin and tumbler cylinders. It allows you to unscrew the cap and depresses the pin which allows removal in one step. Each end is a different size for the appropriate deadbolt cap size. Steel adjustable plain latch core for Kwikset passage knobs and levers.
Master Lock 376 Hand Held Lock Keying Tool Koch 077210 Extruded Cable Sleeve Schlage 40-134 Small Re Keying Kit
For universal pin series uncoded padlocks. For use on Nos. 1UP (673.6896), 1UPLJ (673.6888), 3UP (673.6904), 3UPLF (673.6870), 5UP (673.6920), and 5UPLF (673.6912). Extruded constrution. Used for creating eye terminations on cable or wire rope. Keying kit snap-tight plastic box. Bottom pins, top pins, pin springs, cylinder caps, cap, pins, key gauge and follower bar.
Schlage 40-132 Retail Keying Kit Kwikset 92720-001 Keying Kit
Includes bottom pins, top pins, pin springs, cylinder caps, cap springs and pins, B-series cylinder bars, key gauge, follower bar, cap removal tool and retaining rings. Packed in a seal-tight metal box. No.272 kit for rekeying Kwikset locks. Kit includes master pins, plug clip, knob set, springs, deadbolt locking bar, pin cover, PK balls, key step gauge, depth key, top pin, cylinder removing tool, plug following tool, rekeying tool, bottom pins, anti-pick pins for 980 deadbolts. Packed in a heavy-duty metal case.
   
 
1