Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > LOCKSETS-MISC > TRIM ROSETTES & PLATES
Sort By:
1
DOOR KEY EMERGENCY            National Hardware 3232BC Rope Thimble National Hardware 3232BC Rope Thimble
For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use. National Hardware Rope Thimble, Series: 3232BC, 1/8 in Size, Cold Rolled Steel, Zinc Plated, Gray National Hardware Rope Thimble, Series: 3232BC, 3/16 in Size, Cold Rolled Steel, Zinc Plated, Gray
Campbell T7670629 Wire Rope Thimble National Hardware 3232BC Rope Thimble CLAMP CABLE SS 1/8IN
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Rope Thimble, Series: 3232BC, 1/4 in Size, Cold Rolled Steel, Zinc Plated, Gray Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end.
National Hardware 3232BC Rope Thimble THIMBLE WIRE CBL ZN PLT 3/8IN CLAMP CABLE SS 3/16IN
National Hardware Rope Thimble, Series: 3232BC, 5/16 in Size, Cold Rolled Steel, Zinc Plated, Gray Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end.
National Hardware 3232BC Rope Thimble Kwikset 81467 Lock Cylinder Remover National Hardware 3232BC Rope Thimble
National Hardware Rope Thimble, Series: 3232BC, 1/2 in Size, Cold Rolled Steel, Zinc Plated, Gray Commonly referred to as "Pickle Fork." Use for servicing cylinders. National Hardware Rope Thimble, Series: 3232BC, 5/8 in Size, Cold Rolled Steel, Zinc Plated, Gray
Prime Line E 2282 Door Knob Rosette Prime Line E 2459 Replacement Door Knob Spindle CLAMP CABLE SS 1/4IN
Screw mounted on door. 2-1/4" diameter. Used on old style passage locks. Includes 2 rosettes and installation screws. Replacement spindle for antique style door knob systems and square drive systems. 9/32" diameter square drive, threaded shaft. 3-1/2" length. Includes 2 spindles. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end.
BAR PLASTIC FOLLOWER PLUG     THIMBLE WIRE CBL ZN PLT 3/4IN Midwest 11270 Stranded Guy Wire
Allows you to remove the cylinder plug from all Schlage pin and tumbler keyed products without losing the top pins and springs during the re-keying process. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Wire used to add stability.
Midwest 11272 Stranded Guy Wire Midwest 11268 Solid Braided Clothesline National Hardware 2575BC Clothesline
Wire used to add stability. 15 gauge. National Hardware Clothesline, Series: 2575BC, 0.14 in Diameter, 50 ft Length, 150 lb, Boxed Packing, Steel, Green, Plastic Coated, Resists: Rust and Mildew
Prime Line U-9965 Rim Cylinder Lock DOOR KNOB FLUTED SATIN NICKEL DOOR KNOB FLUTED BRONZE
Heavy-duty diecast housing with brass face and 5 pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate, and 2 screws. One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets. One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets.
Prime Line E 2279 Door Knob Toolbasix 7296510-3L Door Knob Set National Hardware 2574BC Wire
2" diameter glass knob with brass plated, diecast base. 1-15/16" projection. 9/32" square spindle. 2 knobs, spindle, and screws included. National Hardware Wire, Series: 2574BC, 50 ft Length, Steel, Blue Plastic Coated, 100 lb Load
Midwest 11269 Solid Braided Clothesline Campbell T7670659 Wire Rope Thimble Prime Line E 2294 Mortise Lock Assembly
15 gauge. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Mortise caselock with brass plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4" to 5/16" square shaft. Includes 1 mortise caselock assembly, strike plate, and installation screws.
Campbell T7670609 Wire Rope Thimble Prime Line E 2297 Victorian Door Knob Midwest 11823 Multi-Stranded Low Tensile Utility Wire Clothesline
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Victorian style 2-3/16" diameter solid brass knobs. Uses a 9/32" square drive, fits old style bit key lock systems. Includes spindle. Multiple strands of wire assure greater flexibility with no loss of strength. Low-tensile, soft and easy to twist/tie. 12 strand. 50'.
Toolbasix 7296601-3L Door Knob Set Campbell T7670619 Wire Rope Thimble PLUG FOLLOWER
2 knobs, spindle and screws included. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug.
Kwikset 83262-001 Re Keying Kit Campbell T7670639 Wire Rope Thimble KEY GAUGE STEEL
SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed to measure the key cuts on any Schlage key (Except SFIC) to determine what size pins should go in each chamber of the plug for re-keying purposes.
Kwikset 293 3CP Round Trim Rosette Campbell T7670649 Wire Rope Thimble Campbell T7670669 Wire Rope Thimble
3-13/16" diameter. For 2-3/8" or 2-3/4" backset. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Prime Line E-2317 Adjustable Knob Passage Door Latch Set Midwest 11267 Stranded Assorted Clothesline Prime Line E 2437 Reversible Door Lockset
Latchbolt operated by knob on either side; both knobs always free. Diecast latch. Glass knobs. Spindle hole accommodates  5/16" star drive, 1/4" to 5/16" square shaft. Use as decorative passage latch for 2-3/8" backset applications. Includes 1 passage door latch, 1 spindle, 2 knobs, 2 rosettes, and installation screws. 9 gauge. Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys.
Prime Line E 2478 Lockset Toolbasix 6870372-3L Mortise Lock Prime Line E-2311 Victorian Keyed Mortise Lock Set
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys. Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8" backset. 3"L x 9/16"W x 3-7/8"H overall dimensions, 2-9/32"W x 7-1/16"L trim plate. Fluted glass knobs with brass plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate, and installation screws.
KNOB GLASS MORTISE BRONZE     TOP PIN STANDARD KEY          KEY BALLS PROTECTO
Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations. Kwikset Top Pin, Regular, Standard, 0.18 in Length Kwikset Key Ball, Steel
LOCK BOTTOM PIN 1             LOCK BOTTOM PIN 2             LOCK BOTTOM PIN 3
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 4             LOCK BOTTOM PIN 5             LOCK BOTTOM PIN 6
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 5, 0.264 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 6, 0.287 in Length, Gold, For Interior Doors
LOCK MASTER PIN 1             LOCK MASTER PIN 2             LOCK MASTER PIN 3
Cylinder pins. Cylinder pins. Cylinder pins.
LOCK MASTER PIN 4             LOCK MASTER PIN 5             LOCK TOP PIN
Cylinder pins. Cylinder pins. Kwikset Lock Top Pin, 0.16 in Length, Brass
LOCK MASTER PIN 6             LOCK TUMBLER SPRING           MASTER PIN NUM 2 PIN/TMBLR KYD
Cylinder pins. Replacement for Kwikset locks. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 3 PIN/TMBLR KYD MASTER PIN NUM 4 PIN/TMBLR KYD MASTER PIN NUM 5 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 6 PIN/TMBLR KYD MASTER PIN NUM 7 PIN/TMBLR KYD MASTER PIN NUM 8 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 9 PIN/TMBLR KYD KEY PIN BOTTOM PIN TMBLER# 0  KEY PIN BOTTOM PIN TMBLER# 1
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 2  KEY PIN BOTTOM PIN TMBLER# 3  KEY PIN BOTTOM PIN TMBLER# 4
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 5  KEY PIN BOTTOM PIN TMBLER# 6  KEY PIN BOTTOM PIN TMBLER# 7
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 8  KEY PIN BOTTOM PIN TMBLER# 9  TUMBLER KEY TOP PIN BB #1PIN
Door hardware parts. Door hardware parts. Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack.
TUMBLER KEY TOP PIN BB #2PIN  KNOB GLASS MORTISE SAT NCKL   BALL BEARINGS
Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack. Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations. Ball bearing const cores. Pack of 1,000.
Smart Key 83260-001 Reset Cradle TOOL SWAG NO2 CHRMT/YEL       Cambell 7679038 Swaging Tool
A tool for resetting the SmartKey cylinder if it has been improperly programmed. Designed to swage ferrules and stops in making wire rope loops. Hardened steel body and bolts to give swaging strength. User to use when combined with a vise to hold swage tool steady. Follow swaging instructions that come with ferrules and stops. For securing ferrules and stops onto wire rope or cable Use on rope sized 1/8 - 3/16". Do not swage on coated cable.
Hillman 50145 Clothesline RETAINER CAP REMOVAL TOOL     Hillman 50149 Clothesline
Clothesline wire is durable and long lasting. Designed to all you to remove the rear cap from Schlage deadbolt pin and tumbler cylinders. It allows you to unscrew the cap and depresses the pin which allows removal in one step. Each end is a different size for the appropriate deadbolt cap size. Clothesline wire is durable and long lasting.
Hillman 50146 Clothesline Schlage 40-134 Small Re Keying Kit TOOL SWAG NO3 CHRMT/YEL
Clothesline wire is durable and long lasting. Keying kit snap-tight plastic box. Bottom pins, top pins, pin springs, cylinder caps, cap, pins, key gauge and follower bar. Designed to swage ferrules and stops in making wire rope loops. Hardened steel body and bolts to give swaging strength. User to use when combined with a vise to hold swage tool steady. Follow swaging instructions that come with ferrules and stops.
Schlage 40-132 Retail Keying Kit Kwikset 92720-001 Keying Kit
Includes bottom pins, top pins, pin springs, cylinder caps, cap springs and pins, B-series cylinder bars, key gauge, follower bar, cap removal tool and retaining rings. Packed in a seal-tight metal box. No.272 kit for rekeying Kwikset locks. Kit includes master pins, plug clip, knob set, springs, deadbolt locking bar, pin cover, PK balls, key step gauge, depth key, top pin, cylinder removing tool, plug following tool, rekeying tool, bottom pins, anti-pick pins for 980 deadbolts. Packed in a heavy-duty metal case.
   
 
1