Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > LOCKSETS-MISC > REPLACEMENT KNOBS
Sort By:
1
National Hardware MP3230B Wire Cable Clamp National Hardware MP3230B Wire Cable Clamp Cambell T7670409 Wire Rope Clip
National Hardware Wire Cable Clamp, Series: MP3230B, 1/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Wire Cable Clamp, Series: MP3230B, 1/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware MP3230B Wire Cable Clamp Cambell T7670429 Wire Rope Clip DOOR KEY EMERGENCY
National Hardware Wire Cable Clamp, Series: MP3230B, 3/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. For use in Kwikset-brand interior/privacy locksets; conveniently stores above door for ease of use.
National Hardware MP3230B Wire Cable Clamp Cambell T7670439 Wire Rope Clip National Hardware MP3230BC Wire Cable Clamp
National Hardware Wire Cable Clamp, Series: MP3230B, 1/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 1 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230BC, 5/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an eye or Loop on Wire Rope
Cambell T7670449 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp Cambell T7670459 Wire Rope Clip
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230B, 3/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 5 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
FERRULE /TOOL ALUM 1/16IN     FERRULE /TOOL ALUM 3/32IN     FERRULE /TOOL ALUM 1/8IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE/TOOL ALUMINUM 1/16IN  FERRULE/TOOL ALUMINUM 1/8IN   FERRULE/TOOL ALUMINUM 3/32IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE/TOOL ALUMINUM 5/32IN  CABLE FERRULES-STOP 1/16      CABLE CLAMP WIRE SS 1/16
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. For use with wire cable.
FERRULE/TOOL ALUMINUM 3/16IN  Campbell B767-5314 Cable Ferrule/Stop FERRULE /TOOL ALUM 5/32IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
National Hardware MP3230B Wire Cable Clamp FERRULE /TOOL ALUM 3/16IN     Campbell B7675324 Cable Ferrule/Stop
National Hardware Wire Cable Clamp, Series: MP3230B, 1/2 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
Kwikset 7615 Titan Rekeying Tool Cambell T7670479 Wire Rope Clip CLAMP CABLE SS 1/8IN
CABLE CLAMPS 1/8IN SS
Our Price: $2.57
Kwikset 6 pin control key blank; the "Titan" control key allows removal of cylinder without dismantling lock. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
CLAMP CABLE SS 3/16IN         Cambell T7670489 Wire Rope Clip Campbell B7675344/B7675444 Cable Ferrules and Stops Set
CABLE CLAMPS 3/16IN SS
Our Price: $2.77
Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Do Not use on coated cable; if used on coated cable, remove coating from assembly area. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
Kwikset 81467 Lock Cylinder Remover Baron C-260-1/8 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp
Commonly referred to as "Pickle Fork." Use for servicing cylinders. Baron Wire Rope Clip, 1/8 in Opening, Malleable Iron, Galvanized National Hardware Wire Cable Clamp, Series: MP3230B, 5/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 4 in Width, 6 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Koch 143161 Wire Rope Clip Cambell T7670499 Wire Rope Clip CABLE CLAMP WIRE SS 1/8
U-bolts with saddles and bolts on either side. Pack includes 3 rope clips and a thimble. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. For use with wire cable.
Baron C-260-3/16 Wire Rope Clip CABLE CLAMP WIRE SS 3/16      FERRULE /TOOL ALUM 1/4IN
Baron Wire Rope Clip, 3/16 in Opening, Malleable Iron, Galvanized For use with wire cable. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
Prime Line E 2459 Replacement Door Knob Spindle Baron C-260-1/4 Wire Rope Clip CLAMP CABLE SS 1/4IN
CABLE CLAMPS 1/4IN SS
Our Price: $3.44
Replacement spindle for antique style door knob systems and square drive systems. 9/32" diameter square drive, threaded shaft. 3-1/2" length. Includes 2 spindles. Baron Wire Rope Clip, 1/4 in Opening, Malleable Iron, Galvanized Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
FERRULE/TOOL ALUMINUM 1/4IN   CABLE CLAMP WIRE SS 1/4       National Hardware MP3230BC Wire Cable Clamp
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. For use with wire cable. National Hardware Wire Cable Clamp, Series: MP3230BC, 3/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
BAR PLASTIC FOLLOWER PLUG     CABLE CLAMP WIRE SS 5/16      Campbell B7675354/B7675454 Cable Ferrules and Stops Set
Allows you to remove the cylinder plug from all Schlage pin and tumbler keyed products without losing the top pins and springs during the re-keying process. For use with wire cable. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
CABLE CLAMP WIRE SS 3/8       CLAMP CABLE ZINC PLATED 1IN   National Hardware V4230 Weather Resistant Wire Cable Clamp
CABLE CLAMPS 1IN ZN PLT
Our Price: $6.59
CABLE CLAMPS 5/16IN SS
Our Price: $6.75
For use with wire cable. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 5/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3213BC Single Pulley CABLE CLAMP WIRE SS 1/2       Cambell T7670419 Wire Rope Clip
PULLEYS 1-1/2IN ZN PLT
Our Price: $7.12
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications For use with wire cable. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware 3211BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp DOOR KNOB FLUTED SATIN NICKEL
PULLEYS 1-1/2IN ZN PLT
Our Price: $8.03
CABLE CLAMPS 3/16IN SS
Our Price: $8.18
National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets.
DOOR KNOB FLUTED BRONZE       Prime Line E 2279 Door Knob Toolbasix 7296510-3L Door Knob Set
One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets. 2" diameter glass knob with brass plated, diecast base. 1-15/16" projection. 9/32" square spindle. 2 knobs, spindle, and screws included.
National Hardware 3221BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 3213BC Single Pulley
PULLEYS 2IN ZN PLT
Our Price: $8.72
CABLE CLAMPS 3/8IN SS
Our Price: $8.98
PULLEYS 2IN ZN PLT
Our Price: $9.16
National Hardware Single Pulley, Series: 3221BC, 3/8 in Maximum Cable, 100 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, 0.39 in Diameter Groove, 2.61 in Overall Height, 2.63 in Overall Width, Joist Mounting, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications
National Hardware 3219BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp Prime Line E 2297 Victorian Door Knob
PULLEYS 1-1/2IN ZN PLT
Our Price: $9.48
CABLE CLAMPS 1/4IN SS
Our Price: $9.52
National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1-1/2 in Sheave Width, 0.39 in Diameter Groove, 2.77 in Overall Height, 2.23 in Overall Width, Wall, Ceiling Mounting, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/4 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Victorian style 2-3/16" diameter solid brass knobs. Uses a 9/32" square drive, fits old style bit key lock systems. Includes spindle.
National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley
CABLE CLAMPS 1/2IN SS
Our Price: $10.09
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/2 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
National Hardware V4230 Weather Resistant Wire Cable Clamp Cambell 7670704/52333 Cable Ferrule National Hardware 3211BC Single Pulley
CABLE CLAMPS 1/16IN SS
Our Price: $10.28
PULLEYS 2IN ZN PLT
Our Price: $10.31
National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Extruded constrution. Used for creating eye terminations on cable or wire rope. National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.95 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray
PULLEY ZINC PLATED 2IN        National Hardware V4230 Weather Resistant Wire Cable Clamp Toolbasix 7296601-3L Door Knob Set
PULLEYS 2IN ZN PLT
Our Price: $10.38
CABLE CLAMPS 1/8IN SS
Our Price: $10.96
National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2 in Sheave Width, 3-1/4 in Side Plate Length, 1 Grooves, 0.39 in Groove, 2-1/2 in Overall Width, Wall/Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Zinc Plated, For Use With Rope or Cord in Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope 2 knobs, spindle and screws included.
Koch A45172 Pre-Cut Aircraft Cable National Hardware 3213BC Single Pulley Deuer DB15G Fixed Eye Gable Block
PULLEYS 2-1/2IN ZN PLT
Our Price: $11.09
Not intended for use in aircraft control. Medium strength & flexibility. Good abrasion resistance.  For garage doors & winches, tie-down applications. T304 finish. National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.64 in Outer Diameter, 2-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Cambell 7670714/ACSL-3250 Cable Ferrule National Hardware 3213BC Single Pulley National Hardware 3211BC Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $11.91
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.01
Extruded constrution. Used for creating eye terminations on cable or wire rope. National Hardware Single Pulley, Series: 3213BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Fixed Eye Connection, 0.68 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.63 in Outer Diameter, 2-1/2 in Sheave Width, Swivel Eye Connection, 3.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, 4.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications
PULLEY ZINC PLATED 2-1/2IN    Deuer DB15E Swivel Eye Cable Block PLUG FOLLOWER
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.78
National Hardware Scissor Hook Single Pulley, Series: 3217BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2-1/2 in Sheave Width, 3.11 in Side Plate Length, 0.76 in Eye Diameter, 1 Grooves, 0.39 in Groove, 6.35 in Overall Height, 2.63 in Overall Width, Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Nickel Plated, For Use With Rope or Cord in Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Use when re-keying Kwikset & Titan locksets; follows cylinder plug during removal to keep top pins and springs in cylinder plug.
National Hardware 3211BC Single Pulley National Hardware 3223BC Latching Swivel Hook Single Pulley Kwikset 83262-001 Re Keying Kit
PULLEYS 3IN ZN PLT
Our Price: $13.14
PULLEYS 2IN ZN PLT
Our Price: $13.36
National Hardware Single Pulley, Series: 3211BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.4 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, 5.19 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Latching Swivel Hook, Series: 3223BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 6.49 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18 SmartKey Rekeying kit includes a SmartKey learn tool, 4 pre-cut replacement "everyday" keys and 2 pre-cut "temporary" keys.
Deuer DB20G Fixed Eye Gable Block Cambell 7670724/52337 Cable Ferrule KEY GAUGE STEEL
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope. Designed to measure the key cuts on any Schlage key (Except SFIC) to determine what size pins should go in each chamber of the plug for re-keying purposes.
Deuer DB20HS Swivel Eye Scissor Hook Block Deuer DB20E Swivel Eye Cable Block National Hardware 3215BC Swivel Hook Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $16.24
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
National Hardware 3217BC Scissor Hook Single Pulley Deuer DB25HS Swivel Eye Scissor Hook Block Deuer DB25G Fixed Eye Gable Block
PULLEYS 3IN ZN PLT
Our Price: $16.24
National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Baron 66005/50066 Pre-Cut Flexible Aircraft Cable Deuer DB25E Swivel Eye Cable Block Baron 86005/50068 Pre-Cut Flexible Aircraft Cable
Aircraft cable. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Aircraft cable.
Baron 76005/50067 Pre-Cut Flexible Aircraft Cable Baron 260-7/8 Wire Rope Clip Deuer DB30E Swivel Eye Cable Block
Aircraft cable. Baron Wire Rope Clip, 7/8 in Opening, Malleable Iron, Galvanized Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB30G Fixed Eye Gable Block Deuer DB30HS Swivel Eye Scissor Hook Block KNOB GLASS MORTISE BRONZE
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
TOP PIN STANDARD KEY          KEY BALLS PROTECTO            LOCK BOTTOM PIN 1
Kwikset Top Pin, Regular, Standard, 0.18 in Length Kwikset Key Ball, Steel Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 1, 0.172 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 2             LOCK BOTTOM PIN 3             LOCK BOTTOM PIN 4
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 2, 0.195 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 3, 0.218 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 4, 0.241 in Length, Gold, For Interior Doors
LOCK BOTTOM PIN 5             LOCK BOTTOM PIN 6             LOCK MASTER PIN 1
Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 5, 0.264 in Length, Gold, For Interior Doors Kwikset Lock Bottom Pin, Series: Contemporary Style, NO 6, 0.287 in Length, Gold, For Interior Doors Cylinder pins.
LOCK MASTER PIN 2             LOCK MASTER PIN 3             LOCK MASTER PIN 4
Cylinder pins. Cylinder pins. Cylinder pins.
LOCK MASTER PIN 5             LOCK TOP PIN                  LOCK MASTER PIN 6
Cylinder pins. Kwikset Lock Top Pin, 0.16 in Length, Brass Cylinder pins.
LOCK TUMBLER SPRING           MASTER PIN NUM 2 PIN/TMBLR KYD MASTER PIN NUM 3 PIN/TMBLR KYD
Replacement for Kwikset locks. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 4 PIN/TMBLR KYD MASTER PIN NUM 5 PIN/TMBLR KYD MASTER PIN NUM 6 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
MASTER PIN NUM 7 PIN/TMBLR KYD MASTER PIN NUM 8 PIN/TMBLR KYD MASTER PIN NUM 9 PIN/TMBLR KYD
Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock. Designed to be used in the cylinder plug on all Schlage pin and tumbler keyed products that are keyed to a master key system. Designed so that two different keys will open the same lock.
KEY PIN BOTTOM PIN TMBLER# 0  KEY PIN BOTTOM PIN TMBLER# 1  KEY PIN BOTTOM PIN TMBLER# 2
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 3  KEY PIN BOTTOM PIN TMBLER# 4  KEY PIN BOTTOM PIN TMBLER# 5
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 6  KEY PIN BOTTOM PIN TMBLER# 7  KEY PIN BOTTOM PIN TMBLER# 8
Door hardware parts. Door hardware parts. Door hardware parts.
KEY PIN BOTTOM PIN TMBLER# 9  TUMBLER KEY TOP PIN BB #1PIN  TUMBLER KEY TOP PIN BB #2PIN
Door hardware parts. Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack. Designed to be used in the cylinder housing on all Schlage pin and tumbler keyed products. The top pins are designed to be used when master keying or construction keying.  100 pins per pack.
National Hardware V3225 Single Pulley Block and Tackle Set Baron 0 0205/50200 Pre-Cut Aircraft Cable Baron 50201/50210 Pre-Cut Flexible Aircraft Cable
PULLEYS 2IN ZN PLT
Our Price: $24.16
National Hardware Single Pulley Block and Tackle Set, Series: V3225, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 6.23 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Aircraft cable. SWL indicated the safe working load. Aircraft cable. SWL indicated the safe working load.
KNOB GLASS MORTISE SAT NCKL   Baron 0 7005/50070 Pre-Cut Extra Flexible Aircraft Cable Baron 260-1 Wire Rope Clip
Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations. Aircraft cable. Baron Wire Rope Clip, 1 in Opening, Malleable Iron, Galvanized
Baron 50255/50225 Pre-Cut Flexible Aircraft Cable Baron 96005/50069 Pre-Cut Extra Flexible Aircraft Cable Deuer DB35G Fixed Eye Gable Block
Aircraft cable. SWL indicated the safe working load. Aircraft cable. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Cambell 7670744/52338 Cable Ferrule Baron 0 3205/50230 Pre-Cut Aircraft Cable BALL BEARINGS
Extruded constrution. Used for creating eye terminations on cable or wire rope. Aircraft cable. SWL indicated the safe working load. Ball bearing const cores. Pack of 1,000.
Baron 50215/50215 Pre-Cut Flexible Aircraft Cable Baron 54205/50245 Pre-Cut Extra Flexible Aircraft Cable Deuer DB35E Swivel Eye Cable Block
Aircraft cable. SWL indicated the safe working load. Aircraft cable. SWL indicated the safe working load. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB35HS Swivel Eye Scissor Hook Block CABLE GALV PRECUT 7X19 1/4 50 Baron 57005/50075 Pre-Cut Extra Flexible Aircraft Cable
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Aircraft cable. Aircraft cable.
Cambell 7679038 Swaging Tool TOOL SWAG NO2 CHRMT/YEL       Baron 53205/50235 Pre-Cut Flexible Aircraft Cable
For securing ferrules and stops onto wire rope or cable Use on rope sized 1/8 - 3/16". Do not swage on coated cable. Designed to swage ferrules and stops in making wire rope loops. Hardened steel body and bolts to give swaging strength. User to use when combined with a vise to hold swage tool steady. Follow swaging instructions that come with ferrules and stops. Aircraft cable. SWL indicated the safe working load.
Baron 59005/50095 Pre-Cut Extra Flexible Aircraft Cable Baron 83105/50130 Pre-Cut Extra Flexible Aircraft Cable RETAINER CAP REMOVAL TOOL
Aircraft cable. Aircraft cable. Designed to all you to remove the rear cap from Schlage deadbolt pin and tumbler cylinders. It allows you to unscrew the cap and depresses the pin which allows removal in one step. Each end is a different size for the appropriate deadbolt cap size.
Master Lock 376 Hand Held Lock Keying Tool Campbell 7000227 Flexible Aircraft Cable Koch 077210 Extruded Cable Sleeve
For universal pin series uncoded padlocks. For use on Nos. 1UP (673.6896), 1UPLJ (673.6888), 3UP (673.6904), 3UPLF (673.6870), 5UP (673.6920), and 5UPLF (673.6912). WARNING: Do Not Exceed Working Load Limit. Extruded constrution. Used for creating eye terminations on cable or wire rope.
Campbell 700-0397 Flexible Aircraft Cable Campbell 700-0327 Flexible Uncoated Aircraft Cable Schlage 40-134 Small Re Keying Kit
WARNING: Do Not Exceed Working Load Limit. WARNING: Do Not Exceed Working Load Limit. Keying kit snap-tight plastic box. Bottom pins, top pins, pin springs, cylinder caps, cap, pins, key gauge and follower bar.
Campbell 700-0497 Flexible Aircraft Cable TOOL SWAG NO3 CHRMT/YEL       Campbell 700-0197 Flexible Aircraft Cable
WARNING: Do Not Exceed Working Load Limit. Designed to swage ferrules and stops in making wire rope loops. Hardened steel body and bolts to give swaging strength. User to use when combined with a vise to hold swage tool steady. Follow swaging instructions that come with ferrules and stops. WARNING: Do Not Exceed Working Load Limit.
Campbell 700-0427 Flexible Uncoated Aircraft Cable Campbell 700-0627 Extra Flexible Uncoated Aircraft Cable Campbell 700-0827 Extra Flexible Uncoated Aircraft Cable
WARNING: Do Not Exceed Working Load Limit. WARNING: Do Not Exceed Working Load Limit. WARNING: Do Not Exceed Working Load Limit.
Schlage 40-132 Retail Keying Kit Kwikset 92720-001 Keying Kit Campbell 700-0897 Extra Flexible Aircraft Cable
Includes bottom pins, top pins, pin springs, cylinder caps, cap springs and pins, B-series cylinder bars, key gauge, follower bar, cap removal tool and retaining rings. Packed in a seal-tight metal box. No.272 kit for rekeying Kwikset locks. Kit includes master pins, plug clip, knob set, springs, deadbolt locking bar, pin cover, PK balls, key step gauge, depth key, top pin, cylinder removing tool, plug following tool, rekeying tool, bottom pins, anti-pick pins for 980 deadbolts. Packed in a heavy-duty metal case. WARNING: Do Not Exceed Working Load Limit.
Campbell 700-0697 Extra Flexible Aircraft Cable CABLE 1/8IN 7X7 SS 250FT REEL Campbell 7000927/695909 Pre-Cut Extra Flexible Aircraft Cable
WARNING: Do Not Exceed Working Load Limit. Applications: garage doors, winches, tie downs. Good strength. Good flexibility. NOTE: NOT TO BE USED IN AIRCRAFT CONTROLS.
Koch 16162 Aircraft Cable Koch 003292/695911 Aircraft Cable CABLE 3/16IN 7X19SS 250FT REEL
Not intended for use in aircraft control. Good strength & flexibility. Medium abrasion resistance. Use only copper sleeves with stainless steel cable. For garage doors & winches, tie-down applications. T304 finish. Applications: garage doors, winches, tie downs. Good strength. Good flexibility. NOTE: NOT TO BE USED IN AIRCRAFT CONTROLS.
Campbell 7000826 Extra Flexible Aircraft Cable Koch 16212 Aircraft Cable
WARNING: Do Not Exceed Working Load Limit. Not intended for use in aircraft control. Good strength & flexibility. Medium abrasion resistance. Use only copper sleeves with stainless steel cable. For garage doors & winches, tie-down applications. T304 finish.
   
 
1