Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > LOCKSETS-MISC
Choose a sub category:
PANIC BARS WIRE - BULK RIM LOCKSETS
WIRE - PACKAGED CABLE-AIRCRAFT MORTISE LOCKSETS
CLOTHESLINE - WIRE SURFACE LATCH LOCKS CABLE CLAMPS/FERRULES
REPLACEMENT KNOBS SWAGING TOOLS TRIM ROSETTES & PLATES
CABLE THIMBLES CABLE BLOCKS
Sort By:
1
Prime Line E 2459 Replacement Door Knob Spindle Prime Line E 2282 Door Knob Rosette Prime Line U-9965 Rim Cylinder Lock
Replacement spindle for antique style door knob systems and square drive systems. 9/32" diameter square drive, threaded shaft. 3-1/2" length. Includes 2 spindles. Screw mounted on door. 2-1/4" diameter. Used on old style passage locks. Includes 2 rosettes and installation screws. Heavy-duty diecast housing with brass face and 5 pin tumbler lock. For Kwikset and Weiser locks. Includes 1 key cylinder with trim ring, 2 keys, 1 mounting plate, and 2 screws.
DOOR KNOB FLUTED SATIN NICKEL Toolbasix 7296510-3L Door Knob Set Prime Line E 2279 Door Knob
One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets. 2 knobs, spindle, and screws included. 2" diameter glass knob with brass plated, diecast base. 1-15/16" projection. 9/32" square spindle.
DOOR KNOB FLUTED BRONZE       Prime Line E 2297 Victorian Door Knob Prime Line E 2294 Mortise Lock Assembly
One spindle, 2" diameter, used on interior latch sets. Fits 9/32" square drive spindle systems common on antique and vintage door hardware sets. Victorian style 2-3/16" diameter solid brass knobs. Uses a 9/32" square drive, fits old style bit key lock systems. Includes spindle. Mortise caselock with brass plated faceplate. Case hardened steel housing. Spindle hole accommodates 1/4" to 5/16" square shaft. Includes 1 mortise caselock assembly, strike plate, and installation screws.
Toolbasix 7296601-3L Door Knob Set Kwikset 293 3CP Round Trim Rosette Prime Line E-2317 Adjustable Knob Passage Door Latch Set
2 knobs, spindle and screws included. 3-13/16" diameter. For 2-3/8" or 2-3/4" backset. Latchbolt operated by knob on either side; both knobs always free. Diecast latch. Glass knobs. Spindle hole accommodates  5/16" star drive, 1/4" to 5/16" square shaft. Use as decorative passage latch for 2-3/8" backset applications. Includes 1 passage door latch, 1 spindle, 2 knobs, 2 rosettes, and installation screws.
RIM NIGHT LATCH W/HOLD OPEN   RIM DEADLOCK 1IN HARD DEADBOLT Keystone 73428/5570 Utility Wire
Rim night latch, surface mount, solid brass latch & hold-open button, brass finish. 5-Pin, 2 pcs brass material key with nickel-plated finish. KD (key different), Kwikset Keyway, with screws. Rim Deadlock, Surface Mount with 1" Hardened Deadbolt, Brass Finish. 5-Pin, 2 pcs, Brass material, Key with Nickel Plated Finish, KD (Segal Keyway), Kwikset Keyway, with screws. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Keystone 73461/5610 Utility Wire Jackson Wire 16016344 Flexible Tie Wire Keystone 73468/5582 Utility Wire
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Prime Line E 2437 Reversible Door Lockset Prime-Line U 10817 Jimmy Proof Single Cylinder Deadlock Keystone 73483/5585 Utility Wire
Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys. Diecast locking unit and strike, locks door to jamb to prevent forced entry. Single 5-pin tumbler cylinder. Requires a 1-1/4" hole. Includes tamper-proof shutter guard. Flat strike, Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Jackson Wire 16026344 Flexible Tie Wire Prime Line E 2478 Lockset Toolbasix 6870372-3L Mortise Lock
Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Cast steel case lock and keeper. Surface mount design. Brass plated steel knobs and rosettes. Skeleton key system. Used on non mortise applications. Includes 1 lock, 1 keeper, 1 key rosette, 1 knob rosette, 2 knobs, and 2 keys. Steel knob with brass plating. For home and office use. Includes trim plate, strike, knob and two keys. Deadbolt locks from both sides. 2-3/8" backset. 3"L x 9/16"W x 3-7/8"H overall dimensions, 2-9/32"W x 7-1/16"L trim plate.
LOCK JIMMY PROOF SNGL CYLINDER Prime Line E-2311 Victorian Keyed Mortise Lock Set KNOB GLASS MORTISE SAT NCKL
Jimmy-proof lock, Single cylinder with shutter guard feature, 5-Pin, 2 pcs brass material key with nickel-plated finish, KD (key different), Kwikset Keyway, with screws. Fluted glass knobs with brass plated steel trim plates. Case-hardened steel housing. Lock bolt is key activated both inside and outside. May be used for left or right hand installations. Includes 1 mortise caselock assembly, 2 knobs, 2 trim plates, strike plate, and installation screws. Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
LOCK JIMMY PROOF DBL CYLINDER Power Pull 18500 Dual Drive Cable Puller KNOB GLASS MORTISE BRONZE
Shutter guard feature. For home and office use. Dual ratchet drive. 4 ton pulling/2 ton lifting capacity with 6' reach. Features dual ratchet drive, galvanized aircraft cable, nonslip rubber grip, notch-at-a-time let down, rugged steel ratchet wheel guard, 360 swivel, pulley block, and slip hooks with OSHA recommended self-closing latches. Applications: stretching, pulling, lifting, or lowering. Glass knobs on case-hardened steel. Lock bolt is key activated both inside and outside. Latch bolt is reversible for right or left hand installations.
Mintcraft JLO-0283L Power Cable Puller Power Pull 18600 Dual Drive Cable Puller Power Pull 144 Cable Puller
Heavy duty construction. Hardened and tempered stress bearing plates. Drop forged and heat treated hooks with safety latch. Double gear latch. Double gear ratchet mechanism for smoother operation. Dual Ratchet Drive; notch at a time. Laminated steel ratchet wheel; Operates in any position. Plated steel for rust resistance. Drop forged safety hooks. Meets OSHA Specs. Meets ASME Spec B30.21-1999. 1 ton capacity, 2:1 safety factor for stretching, pulling or bracing/lift up to 1/2 ton capacity 4:1 safety factor. Automatic notch-at-a-time control. Galvanized aircraft cable, plated steel frame/steel parts. Made in USA.
Pull'R Holding 144S-6 Cable Puller Power Pull 72A Professional Power Puller Power Pull 18650 Dual Drive Cable Puller
Precision-cast aluminum alloy ratchet wheel; one piece construction galvanized, aircraft quality cable. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle drop-forged steel slip hooks with OSHA Recommended safety latches. Heavy gauge steel, reinforced ratchet guard. Aircraft-type, heat treated bolts. High tensile strength, full rotating steel swivel. Trouble free, ``Notch-At-A-Time" letdown. Permanent, comfortable, non-slip grip. Safety factor 2:1. Cable diameter 3/16". SPECIFICATIONS: No.144SB-6 Maximum lift 6', and leverage 30:1. No.144S-6 Maximum lift 12', and leverage 15:1. Incorporates a pulley block, doubling the pulling power by double-lining the cable through it. One piece pulley block wheels for longer cable life. Padded comfortable round grip. Automatic notch-at-a-time control. Galvanized aircraft test cable. Cast ratchet wheel and pawls for longer life. Heavy zinc plated steel. Drop forged steel hooks. Strong handle. Heavy gauge steel, ratchet guard. Strong clevis pins.  Safety Factor Capacity: 2:1 Cable Limiter; keeps two wraps of cable on the ratchet wheel. Releases load one notch at a time. Dual Ratchet Drive; notch at a time. Laminated steel ratchet wheel; Operates in any position. Plated steel for rust resistance. Drop forged safety hooks. Meets OSHA Specs. Meets ASME Spec B30.21-1999.
PULLER STRAP 1TON             Pull'R Holding 144SB-6 Cable Puller PULLER ROPE 3/4TON
PULLER STRAP 1TON
Our Price: $63.24
PULLER ROPE 3/4TON
Our Price: $69.56
Comes with 25' flexible strapping material that conforms to and controls the load - non-conductive properties. Features precision-cast aluminum alloy ratchet wheel - one piece construction. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle. Drop-forged steel slip hooks with OSHA recommended safety latches. Heavy duty gauge steel, reinforced ratchet guard. Aircraft-type, heat treated bolts. High tensile, fully rotating steel swivel. Trouble free, "Notch-At-A-Time letdown. Permanent, comfortable non-slip grip. Great for truck cargo control, vehicle recovery/rescue, securing motorcycles/ATV's, Race car/auto tie down and animal loading assistance. Precision-cast aluminum alloy ratchet wheel; one piece construction galvanized, aircraft quality cable. Interlocking, precision fit, steel alloy pawls with safety spacer sleeve. Cold rolled, high strength, tempered steel frame and handle drop-forged steel slip hooks with OSHA Recommended safety latches. Heavy gauge steel, reinforced ratchet guard. Aircraft-type, heat treated bolts. High tensile strength, full rotating steel swivel. Trouble free, ``Notch-At-A-Time" letdown. Permanent, comfortable, non-slip grip. Safety factor 2:1. Cable diameter 3/16". SPECIFICATIONS: No.144SB-6 Maximum lift 6', and leverage 30:1. No.144S-6 Maximum lift 12', and leverage 15:1. One piece, aluminum alloy ratchet wheel. High strength, electro-plated steel parts. Notch at-a-time letdown. Designed to use highway 1/2-Inch diameter wear resistant dacron polyester rope-twisted or braided. Can accommodate an unlimited length of rope.
LEVER TRIM CTL881 US26D       PULLER ROPE 20FT 3/4TON       WIRE HI-TENSION SMOOTH 12.5G
LEVER TRIM CTL881 US26D
Our Price: $74.45
PULLER ROPE 20FT 3/4TON
Our Price: $86.77
Exterior sectional lever trim for Tell 8300 and 8400 series panic device; comes with a fixed Schlage "C" cylinder (on applicable functions). Long Haul, with 20' of 1/2" dia. Wear resistant dacron polyester rope - twisted or braided. Longer, flexible reach - conforms to and protects your load. Notch-At-A Time, Let for Positive control, trouble free let down. OSHA Recommended Safety Latches - Hooks stay connected. Non-Slip Plastic Grip provides permanent, comfortable use and reduces hand fatigue. Uses highway approved, Can accommodate an unlimited length of rope. Great for recovering vehicles, securing material to trucks, handling logs, trees & stumps, moving boats & trailers, transporting furniture & clearing debris. Made in the USA.
EXIT DEVICE G1 36IN W/LIP PULL Deacero 5692 Baling Wire Keystone 73389 Utility Wire
Exit device with lip pull trim; baked aluminum enamel; fits doors 28" to 36" wide. Automatic; made from 14-1/2 gauge wire. Coiled, with the starter end of wire in the coil ready to grasp. Use for brace wire, clothesline and other applications.
Keystone 73432/5524 Utility Wire Keystone 73464/5581 Utility Wire Keystone 73473/5584 Utility Wire
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Mintcraft 8000-80NLS-BR Exit Panic Bar With Pull Trim Power Pull 15002 Cable Puller Mintcraft 8000-80NLS-AS Exit Panic Bar With Pull Trim
3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware. Made for heavy lifting, pulling, winching with a 3 ton capacity. Most durable lifting/pulling portable device ever made; equipped with 18 feet of special flexible 5/16" wire cable. Portable; weighs only 23.9 lbs; 3 to 1 safety factor. Applications: Pulling Electrical Wires, Lifting Engines, Recovering Vehicle, Landscape Projects, Auto Repair Work, Farming, Stretching Fences, Boats & Personal Watercraft. 3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with pull trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC-1 Keying for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware.
Mintcraft 8000-80LS-AS Panic Bar With Lever Trim/Key Jackson Wire 73368 Utility Wire
3'0" standard door width, can cut down to fit 2'8". Includes interior bar and exterior lock cylinder with lever trim. Stainless steel latchbolt for trouble free operation. For use on 1-3/4" thick door. Easy to install with SC1 cylinder for security. Completely reversible for left or right hand door applications. U.L. Approved for Panic Hardware. Use for brace wire, clothesline and other applications.
   
 
1