Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > COMBINATION LOCKSETS
Choose a sub category:
COMBINATION LOCKS - KNOB COMBINATION LOCKS - LEVER
Sort By:
1
Fehr Bros 3/16 Anchor Shackle Fehr Bros 1/4IN Anchor Shackle Fehr Bros 5/16 Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Midland Big Orange 081163/MC645G Anchor Shackle Midland Big Orange 081213/MC646G Anchor Shackle Koch 4022613 Wire Hair Pin Clip
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Yellow zinc plated. Used in farm, lawn & garden and other applications to secure attachments and pins.
Midland Big Orange 081253/MC647G Anchor Shackle Fehr Bros 3/8 Anchor Shackle Midland Big Orange 081293/MC648G Anchor Shackle
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Cambell T9600435 Anchor Shackle Koch 4022413 Wire Hair Pin Clip Cambell T9600535 Anchor Shackle
WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Yellow zinc plated. Used in farm, lawn & garden and other applications to secure attachments and pins. WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Speeco 070924YFU Hitch Pin Clip Speeco 070927YBU Hitch Pin Clip Highlander 07114500/15180 Machined Hitch Pin
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications. Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2.
Cambell T9600635/T9640635 Anchor Shackle Speeco 07111100 Bent Hitch Pin Midland Big Orange 081343/MC649G Anchor Shackle
WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted. Many farm, lawn, and garden and industrial applications. Yellow zinc dichromate plated. Complete with 'R' Clip pin. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Fehr Bros 1/2 Anchor Shackle Speeco 07111200 Bent Hitch Pin Cambell T9600835/T9640835 Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Many farm, lawn, and garden and industrial applications. Yellow zinc dichromate plated. Complete with 'R' Clip pin. WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace. DO NOT USE round pin shackles in rigging applications. Screw pin shackles should not be used if there will be movement on the pin. Movement could cause the pin to unscrew and drop the load. Always stand clear of loads being lifted.
Speeco 070928YBU Hitch Pin Clip Midland Big Orange 081373/MC650G Anchor Shackle Highlander 07114800/15190 Machined Hitch Pin
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2.
National Hardware N223-669 Anchor Shackle Highlander 07104100/01820 Machined Hitch Pin Speeco 07101100CL/22131 Hitch Pin
National Hardware Anchor Shackle, Series: 3250BC, 1000 lb Load Limit, 1/4 in, Forged Steel Body, Galvanized, Includes: Screw Pin, BHMA A138.18, Federal Specifications RR-C-271D, Type IV, Class 2, For Marine, Industrial and Construction Applications High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated.
Highlander 071021C0/15200 Machined Hitch Pin Highlander 07102200/1488 Machined Hitch Pin Highlander 07103100/15210 Machined Hitch Pin
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2.
Highlander 07103200/14890 Machined Hitch Pin National Hardware N223-677 Anchor Shackle Campbell T5423300 Twin Clevis Link
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. National Hardware Anchor Shackle, Series: 3250BC, 1000 lb Load Limit, 5/16 in, Forged Steel Body, Galvanized, Federal Specifications RR-C-271D, Type IV, Class 2, BHMA A138.18, For Marine, Industrial and Construction Applications For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16"
Speeco 070980YNU Assorted Hitch Pin Clip Kit Baron 82180/196 Double Clevis Link Fehr Bros 5/8 Anchor Shackle
Hitch pin clip assortment in plastic blister box. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Highlander 07104200/1788 Machined Hitch Pin Speeco 70051100/1500 Hitch Pin LINK CLEVIS DBL 1/4&5/16IN
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
Highlander 07103200/14891 Hitch Pin National Hardware 3250BC Anchor Shackle Speeco 70052100/1501 Hitch Pin
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. National Hardware Anchor Shackle, Series: 3250BC, 2000 lb Load Limit, 3/8 in, Forged Steel Body, Galvanized, Includes: Screw Pin, BHMA A138.18, Federal Specifications RR-C-271D, Type IV, Class 2, For Marine, Industrial and Construction Applications High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip.
LINK CLVS DBL 5/16IN          Speeco 70081100 Hitch Pin Highlander 07105100/1821 Machined Hitch Pin
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2.
Speeco 70052200/1502 Hitch Pin Highlander 07105200/17890 Machined Hitch Pin Speeco 70053200/1504 Hitch Pin
High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2. High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip.
Highlander 07103100/15211 Hitch Pin Speeco 70082100 Hitch Pin Speeco 70053100/1503 Hitch Pin
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included. High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip.
National Hardware 3248BC Double Clevis Link Baron 81380/196 Double Clevis Link Highlander 07104200/17881 Machined Hitch Pin
National Hardware Clevis Link, Double, Series: 3248BC, Suitable For Use With: Chain of an Equal or Lower Grade, 3/8 in, Forged Steel, Zinc Plated, 5400 lb Load Capacity, Grade 43 Specifications, For Making Quick Connections With Two Chains in Industrial and Construction Applications Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated.
Speeco 07105200/17891 Hitch Pin Midland Big Orange 081443/MC651G Anchor Shackle Speeco 70082200 Hitch Pin
High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included.
Speeco 70083100 Hitch Pin LINK CLVS 3/8IN               Campbell T5423301 Twin Clevis Link
Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16"
National Hardware 3250BC Anchor Shackle Speeco 70054200/1506 Hitch Pin Koch 4010213 E-Grip Hitch Pin with Wire Handle
National Hardware Anchor Shackle, Series: 3250BC, 4000 lb Load Limit, 1/2 in, Forged Steel Body, Galvanized, Includes: Screw Pin, BHMA A138.18, Federal Specifications RR-C-271D, Type IV, Class 2, For Marine, Industrial and Construction Applications High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip. Used for coupling implement and machinery.
SHACKLE-FORGED GALV 5/8IN     Fehr Bros 3/4 Anchor Shackle Speeco 70083200 Hitch Pin
Designed for use in marine, industrial and construction applications. Galvanized finish for superior corrosion resistance. Meet federal specifications RR-C-271D, Type IV, Class 2. Manufactured from forged steel. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included.
Baron 82480/196 Double Clevis Link LINK CLVS DBL ZN PLT 1/2IN    Koch 4010323 E-Grip Hitch Pin with Solid Handle
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Used for coupling implement and machinery.
Speeco 70055200/1508 Hitch Pin Campbell T5423302 Twin Clevis Link Highlander 07106200/17900 Machined Hitch Pin
High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip. Forged steel; finish is Zinc Plated. For use with Proof Coil or High Test chain. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. 25 percent stronger than grade 2.
LINK CLVS 1/2IN               Speeco 70084200 Hitch Pin Koch 4010413 E-Grip Hitch Pin with Solid Handle
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included. Used for coupling implement and machinery.
Midland Big Orange 081503/MC652G Anchor Shackle Koch 4010423 E-Grip Hitch Pin with Solid Handle LINK CLVS DBL ZN PLT 5/8IN
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Used for coupling implement and machinery. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
Fehr Bros 7/8 Anchor Shackle Highlander 07106200/17901 Machined Hitch Pin Koch 4010523 E-Grip Hitch Pin with Solid Handle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. High tensile steel with a spring wire handle and oversized washer-head. Zinc plated. Used for coupling implement and machinery.
Speeco 70056200/1510 Hitch Pin Speeco 70085200 Hitch Pin Koch 4010623/M1231E E-Grip Hitch Pin with Solid Handle
High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip. Our premium heat treated, forged hitch pin made from alloy steel is designed for the toughest applications. Pin has black powder coating with a blue vinyl coated head and handle. Plated clip pin included. Used for coupling implement and machinery.
Midland Big Orange 081543/MC653G Anchor Shackle Fehr Bros 1 Anchor Shackle Speeco 70057200/1512 Hitch Pin
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. High tensile steel double heat treated. One piece forged pin painted black. Handle is red plastic-coated. Includes zinc plated clip.
Kwikset Tylo Signature 243T3CP6ALK2 Project Pack Midland Big Orange 081593/MC654G Anchor Shackle Midland Big Orange 081613/MC655G Anchor Shackle
Includes two Tylo entry knobs locksets for keyed exterior doors. Both knobs lock or unlock by key outside or turnbutton inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" to 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4" door. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 3. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Kwikset Juno J3SMTCP Single Cylinder Deadbolt Knob Lockset Kwikset Juno J15SMTCP Single Cylinder Deadbolt Knob Lockset DOOR ENTRY KNOB/DEADBOLT PACK
Includes one Juno entry lockset and one single cylinder No.980 deadbolt. Lockset locks and unlocks by key outside and turnbutton inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2", 1" Edge Bore. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/4" doors standard. CYLINDER:  5-pin SmartKey cylinder. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt - 1-1/8" x 2-3/4" round corner standard. Includes ultra-strike door jamb brace with (3) 3" screws, knob - 2-1/4" full lip. BOLT: Deadbolt - Brass bolt, full 1" throw. Titanium alloy throw core. Knob - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Deadbolt Grade 1, Knob -  Grade 2. Deadbolt - ADA4.13.9 requirements. Includes one Juno entry lockset and one single cylinder No.980 deadbolt. Lockset locks and unlocks by key outside and turnbutton inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2", 1" Edge Bore. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/4" doors standard. CYLINDER:  5-pin SmartKey cylinder. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt - 1-1/8" x 2-3/4" round corner standard. Includes ultra-strike door jamb brace with (3) 3" screws, knob - 2-1/4" full lip. BOLT: Deadbolt - Brass bolt, full 1" throw. Titanium alloy throw core. Knob - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Deadbolt Grade 1, Knob -  Grade 2. Deadbolt - ADA4.13.9 requirements. Includes two Tylo entry knob locksets and two No.660 deadbolts. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3.
MOBILEHOME LOCKSET COMBO SS   MOBILEHOME PB LOCKSET COMBO   HANDLESET W/T3 BALL KNOB PB
Combo set includes Deadbolt, & Tulip knob Entry Lock, Full Lip 1/4,  Kwikset KW1 5-pin Tumbler, 2 pcs Nickel Finish Brass Key per Lock (total 4 pcs keys), Combo set includes Deadbolt, & Tulip knob Entry Lock, Full Lip 1/4,  Kwikset KW1 5-pin Tumbler, 2 pcs Nickel Finish Brass Key per Lock (total 4 pcs keys), Forged solid brass full handle and interior knob with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and turnpiece inside. All metal components. Solid steel latch assembly. Rust resistant solid brass keyway for more security. Solid brass deadbolt with hardened steel rod insert to prevent sawing through latchbolt. Seamless one-piece knob for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face for plainlatch and deadlock; 8-5/8" CTC handleset crossbore to lower handle screw. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4" min; 5" CTC or great plainlatch and deadlock strikes. BOLTS: Plainlatch - 1/2" throw; Deadlock - solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. 6-way universal.
Kwikset Juno 99910-035 Single Cylinder Deadbolt Knob Lockset HANDLESET W/T3 KNOB ANT BRS   HANDLESET W/T3 KNOB SAT NICKEL
Includes one Juno entry lockset and one single cylinder No.980 deadbolt. Lockset locks and unlocks by key outside and turnbutton inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2", 1" Edge Bore. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/4" doors standard. CYLINDER:  5-pin SmartKey cylinder. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt - 1-1/8" x 2-3/4" round corner standard. Includes ultra-strike door jamb brace with (3) 3" screws, knob - 2-1/4" full lip. BOLT: Deadbolt - Brass bolt, full 1" throw. Titanium alloy throw core. Knob - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Deadbolt Grade 1, Knob -  Grade 2. Deadbolt - ADA4.13.9 requirements. Forged solid brass full handle and interior knob with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and turnpiece inside. All metal components. Solid steel latch assembly. Rust resistant solid brass keyway for more security. Solid brass deadbolt with hardened steel rod insert to prevent sawing through latchbolt. Seamless one-piece knob for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face for plainlatch and deadlock; 8-5/8" CTC handleset crossbore to lower handle screw. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4" min; 5" CTC or great plainlatch and deadlock strikes. BOLTS: Plainlatch - 1/2" throw; Deadlock - solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. 6-way universal. Forged solid brass full handle and interior knob with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and turnpiece inside. All metal components. Solid steel latch assembly. Rust resistant solid brass keyway for more security. Solid brass deadbolt with hardened steel rod insert to prevent sawing through latchbolt. Seamless one-piece knob for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face for plainlatch and deadlock; 8-5/8" CTC handleset crossbore to lower handle screw. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4" min; 5" CTC or great plainlatch and deadlock strikes. BOLTS: Plainlatch - 1/2" throw; Deadlock - solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. 6-way universal.
HANDLESET W/T3 KNOB AGED BRNZ LEVER ENTRY CMB DEADBOLT ABRZ Kwikset Dakota 687 Door Handleset with Polo Interior Knob
Forged solid brass full handle and interior knob with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and turnpiece inside. All metal components. Solid steel latch assembly. Rust resistant solid brass keyway for more security. Solid brass deadbolt with hardened steel rod insert to prevent sawing through latchbolt. Seamless one-piece knob for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face for plainlatch and deadlock; 8-5/8" CTC handleset crossbore to lower handle screw. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4" min; 5" CTC or great plainlatch and deadlock strikes. BOLTS: Plainlatch - 1/2" throw; Deadlock - solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. 6-way universal. For use on exterior doors where additional security is needed; reversible lever works for left and right-handed doors; designed for standard door preparations, fits existing pre-drilled holes; 2 points of locking for added security; all-metal chassis for strength and durability; maximum security deadbolt offers protection against attacks by crowbar, hammer, wrench, saw, lock pick and kick-in; combo pack contains a deadbolt, keyed on 1 side and a keyed entry lock; meets ANSI grade 1 specifications; universal backset adjusts to 2-3/8" (60mm) or 2-3/4" (70mm). Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds.
Kwikset Dakota 687 Door Handleset with Tylo Interior Knob Kwikset Dakota 687 Door Handleset with Tylo Interior Knob Kwikset Dakota 687 Door Handleset with Polo Interior Knob
Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds. Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds.
HANDLESET S-CYLDAKOTA SMT 11P Kwikset Bellview 687 Single Cylinder Entry Handleset Kwikset Bellview 687 Single Cylinder Entry Handleset with Cove
Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. Security handlesets feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and 5-pin system. DOOR PREP: Deadbolt - 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. Handle - 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable 2-3/8" - 2-3/4" optional, Handle - dual 2-3/8" - 2-3/4" plainlatch standard. DOOR THICKNESS: 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: Deadbolt - 1" x 2-1/4" round corner. Handle -  2-1/4" full lip round corner. BOLT: Deadbolt - 1" throw. Handle - 1/2" throw plainlatch. HANDING: Reversible for right or left hand doors. SMT - SmartKey, re-key the lock in less than ten seconds. Handleset with single cylinder deadbolt, exterior only; features adjustable latch and deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 deadbolt security featuring "SmartKey" re-key technology. The lock you can re-key yourself in seconds; "SmartKey" cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Lifetime mechanical and finish warranty. Handleset with single cylinder deadbolt, exterior only; features adjustable latch and deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 deadbolt security featuring "SmartKey" re-key technology. The lock you can re-key yourself in seconds; "SmartKey" cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Lifetime mechanical and finish warranty.
HANDLESET SMARTKEY SAT NICKEL Schlage Plymouth F60VPLY/PLY505 Door Handleset Schlage Plymouth F60VPLY/FLA505 Flair Door Handleset
Sectional handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8"doors. CYLINDER: 6-pin. 5-pin optional. FACEPLATE: 1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8" round corner standard. Includes ultra-strike door jam brace with (3) 3" screws. Handle - 2-1/4" full lip round corner standard. BOLT: Deadbolt - Brass bolt, full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1 Deadbolt. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps.
Schlage Plymouth F60VPLY/ACC505 Accent Door Handleset Schlage Plymouth F60 Single Cylinder Door Handleset Kwikset Tylo 690T3CP6ALRCSK6 Deadbolt Entry Knob Lockset
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. Includes one Tylo entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3.
Schlage Plymouth F60 Accent Single Cylinder Door Handleset Schlage Camelot F60 Single Cylinder Door Handleset Kwikset Hawthrone 800 Signature Single Cylinder Door Handleset
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt cross bore; 7/8" or 1" edge bore; 1" x 2-1/4" latch faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. TRIPLE OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. One piece handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8" doors. CYLINDER:  6-pin. 5-pin optional. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8". Handle - 2-1/4" full lip. BOLT: Deadbolt - Brass bolt, full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors. ANSI/BHMA Grade 2 Certified Security featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. Lifetime mechanical and finish warranty.
Kwikset Montara 95530 Single Cylinder Door Handleset Kwikset Montara 95530 Single Cylinder Door Handleset Kwikset Austin 800 Signature Single Cylinder Door Handleset
One piece handleset with single cylinder deadbolt and interior trim; 2 points of locking, on the deadbolt and the handleset, provide double the security; the adjustable through bolt at the bottom of the handleset allows for easy installation and provides you peace of mind knowing that it will adjust to fit the bottom hole in your door. With the arched design, the Montara handleset will add both security and style to your front door. 2-Point Locking for Increased Security; new easy fit technology ? adjusts to fit the hole in your door. ANSI/BHMA Grade 2 Certified Security featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks. Lifetime mechanical and finish warranty. One piece handleset with single cylinder deadbolt and interior trim; 2 points of locking, on the deadbolt and the handleset, provide double the security; the adjustable through bolt at the bottom of the handleset allows for easy installation and provides you peace of mind knowing that it will adjust to fit the bottom hole in your door. With the arched design, the Montara handleset will add both security and style to your front door. 2-Point Locking for Increased Security; new easy fit technology ? adjusts to fit the hole in your door. ANSI/BHMA Grade 2 Certified Security featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks. Lifetime mechanical and finish warranty. Handleset with single cylinder deadbolt and interior trim; Simple yet rugged, Austin?s rustic style brings a new level of charm and appeal to any space, whether in the city or country. The Austin family includes a handleset, lever and deadbolt with decorative swing cover. Warm and inviting, yet traditional in its simplicity, Austin embraces the aesthetic of modern transitional decor. Decorative Deadbolt Swing Cover. New Easy Fit Technology ? adjusts to fit the hole in your door. ANSI/BHMA Grade 2 Security featuring "SmartKey" Re-key Technology. The lock you can re-key yourself in seconds. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks. Lifetime mechanical and finish warranty.
Kwikset Austin 800 Signature Single Cylinder Door Handleset Kwikset Montara 95530 Single Cylinder Door Handleset Schlage Camelot F60 Plymouth Single Cylinder Door Handleset
Handleset with single cylinder deadbolt and interior trim; Simple yet rugged, Austin?s rustic style brings a new level of charm and appeal to any space, whether in the city or country. The Austin family includes a handleset, lever and deadbolt with decorative swing cover. Warm and inviting, yet traditional in its simplicity, Austin embraces the aesthetic of modern transitional decor. Decorative Deadbolt Swing Cover. New Easy Fit Technology ? adjusts to fit the hole in your door. ANSI/BHMA Grade 2 Security featuring "SmartKey" Re-key Technology. The lock you can re-key yourself in seconds. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks. Lifetime mechanical and finish warranty. One piece handleset with single cylinder deadbolt and interior trim; 2 points of locking, on the deadbolt and the handleset, provide double the security; the adjustable through bolt at the bottom of the handleset allows for easy installation and provides you peace of mind knowing that it will adjust to fit the bottom hole in your door. With the arched design, the Montara handleset will add both security and style to your front door. 2-Point Locking for Increased Security; new easy fit technology ? adjusts to fit the hole in your door. ANSI/BHMA Grade 2 Certified Security featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks. Lifetime mechanical and finish warranty. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt cross bore; 7/8" or 1" edge bore; 1" x 2-1/4" latch faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. TRIPLE OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps.
Schlage Camelot F360 Single Cylinder Entry Handleset Kwikset Shelburne 800 Signature Single Cylinder Door Handleset Schlage Camelot F60 Avanti Single Cylinder Door Handleset
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt cross bore; 7/8" or 1" edge bore; 1" x 2-1/4" latch faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. TRIPLE OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. One piece handleset with single cylinder deadbolt. Latchbolt operated by thumbpiece outside and grip inside. Deadbolt operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: Deadbolt - adjustable to 2-3/8" or 2-3/4", Handle - adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/4" standard. 2-1/4" optional. Not designed for use on 1-3/8" doors. CYLINDER:  6-pin. 5-pin optional. FACEPLATE:  1" x 2-1/4". STRIKE: Deadbolt - 1-1/4" x 3-5/8". Handle - 2-1/4" full lip. BOLT: Deadbolt - full 1" throw, Titanium alloy roller pin. Handle - 1/2" throw. Nickel plated. HANDING: Reversible for right or left hand doors.  ANSI/BHMA Grade 2 Certified Security featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. Lifetime mechanical and finish warranty. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt cross bore; 7/8" or 1" edge bore; 1" x 2-1/4" latch faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. TRIPLE OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps.
Kwikset Tylo 690T3RCLRCSK6BX Deadbolt Entry Knob Lockset Schlage Plymouth F60PLYXGEO609 Single Cylinder Entry Handleset Schlage Plymouth F60 Single Cylinder Entry Handleset
Includes one Tylo entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps.
Kwikset Tylo 690T5CP6ALRCSK6 Deadbolt Entry Knob Lockset Schlage Plymouth F60PLYXGEO620 Single Cylinder Entry Handleset DOOR ENTRY/BOLT COMB SATIN NIC
Includes one Tylo entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from outside or by inside turn unit. Latch retracted by thumbpiece from inside or outside grip. Solid forged brass outside trim, wrought brass trim rings with concealed security inserts. Wrought brass inside trim. Wrought brass cylinder trim rings reinforced by tapered die cast security insert for resistance to wrenching or prying. All handlesets have the same finish for both interior and exterior parts except the Bright Brass finish which has a bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 1-1/2" or 2-1/8" deadbolt and 2-1/8" latchbolt Crossbore; 7/8" or 1" Edge Bore; 1" x 2-1/4" Latch Faces; 4" CTC. DOOR THICKNESS: 1-5/8" to 1-3/4"; packed with extra mounting screws to accommodate 2" doors. CYLINDER: 5-pin with nickel silver pins and keys (2). FACEPLATES: 1" x 2-1/4". STRIKES: Deadbolt - 1-1/8" x 2-3/4", square corner, no lip, dust box and door frame reinforcer; Latchbolt - 1-5/8" x 2-1/4" full lip. BOLT: Maximum Security B300 single cylinder or B362 double cylinder deadbolt with 7/8" housing diameter, 1" throw. ANSI/BHMA: Grade 1 Security features. DUAL OPTION UNIVERSAL: Both handleset and deadbolt fit all doors, 2-3/8" or 2-3/4" backset; square corner, round corner, or drive-in preps. Includes one Tylo entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3.
Kwikset Polo 690P3CP6ALRCSK6 Single Cylinder Deadbolt Entry Knob Lockset Kwikset Polo 695P3CP6ALRCSK6 Deadbolt Entry Knob Lockset Kwikset Polo 690P15CP6ALRCSK6 Deadbolt Entry Knob Lockset
Includes one Polo entry lockset and one No.660 deadbolt. For keyed exterior doors. Both knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" to 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip round corner. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. Includes one Polo entry lockset and one No.665 deadbolt. Both knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob  Grade 3, deadbolt   Grade 3. Includes one Polo entry lockset and one No.660 deadbolt. For keyed exterior doors. Both knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" to 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip round corner. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3.
DOOR HNDLST ENTRY VBZ POLO    Kwikset Tylo 695T3CP6ALRCSK6 Double Cylinder Deadbolt Entry Knob Lockset Kwikset Tylo 690T26DCP6ALRCSK6 Deadbolt Entry Knob Lockset
Includes one Polo entry lockset and one No.660 deadbolt. For keyed exterior doors. Both knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" to 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip round corner. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. Includes one Tylo entry knob lockset and one No.665 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob  Grade 3, deadbolt   Grade 3. Includes one Tylo entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3.
Kwikset Polo 690P5CP6ALRCSK6 Deadbolt Entry Knob Lockset Kwikset Tylo 695T5CP6ALRCSK6 Double Cylinder Deadbolt Entry Knob Lockset COVE/SC DBOLT COMBO K6 STN NKL
Includes one Polo entry lockset and one No.660 deadbolt. For keyed exterior doors. Both knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" to 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip round corner. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. Includes one Tylo entry knob lockset and one No.665 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob  Grade 3, deadbolt   Grade 3. Includes one Cove entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob A156.2 Grade 3, deadbolt  Grade 3.
Schlage Plymouth FB50NVPLY505 Biscuit Mushroom Entry Knob Lockset Kwikset Tylo 695T26DCP6ALRCSK6 Deadbolt Entry Knob Lockset Schlage FB50NVGEO619 Decorative Biscuit Mushroom Knob Lockset
For heavy-duty residential and light-duty commercial doors; factory # FB50NPLY505 includes a single cylinder deadbolt and one No.F51 Plymouth entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple Option Universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5, 1992 Grade 2 with Grade 1 security features. SECURE KEY. Includes one Tylo entry knob lockset and one No.665 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob  Grade 3, deadbolt   Grade 3. For heavy duty residential and light duty commercial doors. For keyed exterior doors. Both knobs lock or unlock by key outside or turnbutton inside. Deadbolt thrown or retracted by key from outside or by inside turn unit. Includes one No. 360 single cylinder deadbolt and one No. F51 Georgian entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple option universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5 1992 Grade 2 with Grade 1 security features.
Schlage FB50NVGEO609 Decorative Biscuit Mushroom Knob Lockset DEADBOLT COMBO STN NKL        Kwikset Cove 690CV 11P CP K6 Deadbolt Entry Knob Lockset
DEADBOLT COMBO STN NKL
Our Price: $204.00
For heavy duty residential and light duty commercial doors. For keyed exterior doors. Both knobs lock or unlock by key outside or turnbutton inside. Deadbolt thrown or retracted by key from outside or by inside turn unit. Includes one No. 360 single cylinder deadbolt and one No. F51 Georgian entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple option universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5 1992 Grade 2 with Grade 1 security features. For heavy-duty residential and light-duty commercial doors; factory # FB50NPLY505 includes a single cylinder deadbolt and one No.F51 Plymouth entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple Option Universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5, 1992 Grade 2 with Grade 1 security features. SECURE KEY. Includes one Cove entry knob lockset and one No.660 deadbolt. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob A156.2 Grade 3, deadbolt  Grade 3.
Speeco 28031400/3044 Hitch Pin Assortment Kwikset Tylo Signature 242T3CP6ALRCS Project Pack Schlage FB50NVGEO716KA4 Decorative Biscuit Mushroom Knob Lockset
Pins are made of high tensile zinc plated steel with a spring wire handle, oversized washer-head and clip.  Includes sturdy wire rack. Mounts on pegboard, shelf or counter. Includes vinyl header with product size and size information. Assortment contains:  3- S071021C0, 3 ? S071022C0, 4 ? S071031C0, 4 ? S071032C0, 3 ? S071041C0, 3 ? S071042C0, 2 ? S071052C0. and 2-SO71051CO. Includes two Tylo entry knob locksets and two No.660 deadbolts. Knobs locked or unlocked by key outside or turnbutton inside. Deadbolt operated by key outside and thumbturn inside. Security knobs feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield 5-pin system. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and adjustable 2-3/8" and 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip. BOLT: knob 1/2" throw, deadbolt 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: knob Grade 3, deadbolt  Grade 3. For heavy duty residential and light duty commercial doors. For keyed exterior doors. Both knobs lock or unlock by key outside or turnbutton inside. Deadbolt thrown or retracted by key from outside or by inside turn unit. Includes one No. 360 single cylinder deadbolt and one No. F51 Georgian entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple option universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5 1992 Grade 2 with Grade 1 security features.
LEVER DOOR ENTRY D-BOLT BRASS LOCK ENTRY/DBOLT VBZ BALBOA   LOCK ENTRY/DBOLT SATNIC BALBOA
For use on exterior doors where additional security is needed; reversible lever works for left and right-handed doors; designed for standard door preparations, fits existing pre-drilled holes; 2 points of locking for added security; all-metal chassis for strength and durability; maximum security deadbolt offers protection against attacks by crowbar, hammer, wrench, saw, lock pick and kick-in; combo pack contains a deadbolt, keyed on 1 side and a keyed entry lock; meets ANSI grade 1 specifications; universal backset adjusts to 2-3/8" (60mm) or 2-3/4" (70mm). Includes (1) entry lever and (1) No. 660 deadbolt; for use on exterior doors where keyed entry and security is needed; features an adjustable latch to fit all standard door prepapartions which is included; ANSI/BHMA Grade 3 certified. Includes (1) entry lever and (1) No. 660 deadbolt; for use on exterior doors where keyed entry and security is needed; features an adjustable latch to fit all standard door prepapartions which is included; ANSI/BHMA Grade 3 certified.
Schlage FB50VGEO505 Knob Lockset Schlage Belair FB50NVBEL505 Single Cylinder Knob Lockset LOCK DOOR ENTRY/DBOLT SAT NIC
For heavy duty residential and light duty commercial doors. For keyed exterior doors. Both knobs lock or unlock by key outside or turnbutton inside. Deadbolt thrown or retracted by key from outside or by inside turn unit. Includes one No. 360 single cylinder deadbolt and one No. F51 Georgian entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple option universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5 1992 Grade 2 with Grade 1 security features. For heavy-duty residential and light-duty commercial doors. Includes one No.360 single cylinder deadbolt and one No.F51 Bell entry lockset; both deadbolt and entry are keyed alike. Deadbolt has a 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. Entry lockset of solid wrought brass with pressure cast zinc tubular housing. Triple Option Universal latch fits any door, 2-3/8" or 2-3/4" backset, square corner, round corner, or drive-in preps. Lockset meets ANSI A156.2 Grade 2; deadbolt exceeds ANSI A156.5, 1992 Grade 2 with Grade 1 security features. SECURE KEY feature allows you to re-key the lock without ever removing it from the door. Includes lever and 980 series deadbolt; provides two locking points, keyed entry and deadbolt for exterior doors; combo packs provide additional value plus the convenience of one key operating both locks; easy to install; adjustable latch and deadbolt fit all standard door preparations; deadbolt rated Grade 1; features "SmartKey" Re-key technology - the lock you can re-key yourself in seconds; "SmartKey" cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks.
Red Head 28032200/3046 Assortment Hitch Pin Display LEVER DOOR ENTRY DB SAT NICKEL LOCK ENTRY/DBOLT VBZ TUSTIN
Contains best selling sizes. Includes sturdy wire rack. Mounts on pegboard, shelf or counter. Stacks on other rack displays. Includes header with product and size info. Assortment contains: 6 ? S70052200, 8 - S70053100, 8 ? S70053200, 4 ? S70054200, 3 ? S70055200. For use on exterior doors where additional security is needed; reversible lever works for left and right-handed doors; designed for standard door preparations, fits existing pre-drilled holes; 2 points of locking for added security; all-metal chassis for strength and durability; maximum security deadbolt offers protection against attacks by crowbar, hammer, wrench, saw, lock pick and kick-in; combo pack contains a deadbolt, keyed on 1 side and a keyed entry lock; meets ANSI grade 1 specifications; universal backset adjusts to 2-3/8" (60mm) or 2-3/4" (70mm). Includes lever and 980 series deadbolt; provides two locking points, keyed entry and deadbolt for exterior doors; combo packs provide additional value plus the convenience of one key operating both locks; easy to install; adjustable latch and deadbolt fit all standard door preparations; deadbolt rated Grade 1; features "SmartKey" Re-key technology - the lock you can re-key yourself in seconds; "SmartKey" cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks.
   
 
1