Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > DOOR LOCK DEADBOLTS
Choose a sub category:
DEADBOLTS - SINGLE CYLINDER DEADBOLTS - DOUBLE CYLINDER DEADBOLTS - ELECTRONIC
DEADBOLTS - SMART / BLUETOOTH
Sort By:
1
SHUT COLD ZINC PLATED 3/16IN  QUICK LINK ZN 3/16            SPRING SNAP STEEL ZN 3/16
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Factory number indicated thickness (inches). WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
Campbell T4900324 Cold Shut National Hardware 3153BC Cold Shut Campbell T4900424 Cold Shut
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.03
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3153BC Cold Shut Campbell T4900524 Cold Shut Campbell T4900624 Cold Shut
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Baron 2450-1/4 Snap Link SHUT COLD ZINC PLATED 3/8IN   SNAP LINK 9/32
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.50
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
SPRING SNAP ASST AL 5/16      QUICK-LINK ZINC PLATED 1/8IN  SNAP SPRG INTRLK ZN 1/4X2IN
Baron Spring Snap, 75 lb, 1/2 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Aluminum Designed for fast, easy connections between two lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Steel body construction. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
Lehigh 7035BM-2P30 Assorted Spring Snap Link SPRING SNAP STEEL ZN 11/32    National Hardware 3150BC Quick Link
Ideal for securing keys and accessories. Versatile for students, hikers, bikers, boaters, hunters, contractors and maintenance workers. Assorted vibrant colors. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. National Hardware Quick Link, Series: 3150BC, 3/16 in, Steel, Zinc Plated, 660 lb Load Capacity, For Fast, Easy Connections Between Two Lengths of Chain or For Attaching Accessories to Chain
QUICK LINK ZN 3/8             SNAP LINK 5/16                National Hardware 3150BC Quick Link
Factory number indicated thickness (inches). WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. National Hardware Quick Link, Series: 3150BC, 1/4 in, Steel, Zinc Plated, 880 lb Load Capacity, For Fast, Easy Connections Between Two Lengths of Chain or For Attaching Accessories to Chain
National Hardware 3153BC Cold Shut Baron C-7350T-1/8 Quick Link National Hardware TP3113BC Interlocking Spring Snap
National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments Baron Quick Link, 1/8 in Chain, 1-3/8 in Overall Length X 3/16 in Jaw Opening, Steel, Zinc Plated, For Join Line, Chain, Shackles or Other Assemblies National Hardware Interlocking Spring Snap, Series: TP3113BC, 50 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Aluminum, Steel, Multi-Color, For Quick Attachment of Gear, Keys, Tools and Other Equipment
Campbell T4900824 Cold Shut Koch 93161 Quick Link Baron C-7350T-3/16 Quick Link
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Steel construction with threaded nut. Baron Quick Link, 3/16 in Chain, 1-7/8 in Overall Length X 1/4 in Jaw Opening, Steel, Zinc Plated
Baron C-7350T-1/4 Quick Link QUICK LINK SS 1/8             National Hardware 3153BC Cold Shut
COLD SHUTS 1/2IN ZN PLT
Our Price: $2.68
Baron Quick Link, 1/4 in Chain, 2-1/4 in Overall Length X 9/32 in Jaw Opening, Steel, Zinc Plated Baron Quick Link, 1/8 in Thick x 1-3/8 in OAL, 3/16 in Jaw Opening, 316 Stainless Steel National Hardware Cold Shut, Series: 3153BC, 1/2 in, 0.47 in Rod Diameter, 0.52 in Hole Diameter, Steel, Zinc Plated, 4500 lb Load Capacity, 2.64 in Width, For Use to Couple Chain Attachments
Koch 245251 Rigid Round Eye Spring Snap Link Wellington 7038CG-50FB Spring Snap Link SNAP SPRG ASST COLOR 3-1/8IN
Koch Spring Snap Link, Rigid Round Eye, 5/16 in Eye X 2-3/4 in Length X 1/4 in Opening, Zinc Plated 3" aluminum camouflage gear clips, glossy assortment, 50 pcs in fish bowl container. National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring
National Hardware 3112BC Interlocking Spring Snap Koch 245291 Rigid Round Eye Spring Snap Link QUICK-LINK ZINC PLATED 5/16IN
National Hardware Interlocking Spring Snap, Series: 3112BC, 165 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Steel, Zinc Plated, Gray, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Koch Spring Snap Link, Rigid Round Eye, 3/8 in Eye X 2-3/4 in Length X 9/32 in Opening, Zinc Plated Designed for fast, easy connections between two lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Steel body construction.
Baron 2450-3/8 Snap Link Koch 243231 Assorted Spring Link QUICK LINK SS 3/16
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed for use with rope, chain, strap, animal leashes and other home, farm an recreational applications. Baron Quick Link, 3/16 in Thick x 1-7/8 in OAL, 1/4 in Jaw Opening, 316 Stainless Steel, 440 lb Load Capacity
Baron C-7350T-5/16 Quick Link SNAP SPRG CAMO ALU/STL 3-1/8IN Koch 245341 Rigid Round Eye Spring Snap Link
Baron Quick Link, 5/16 in Chain, 2-15/16 in Overall Length X 3/8 in Jaw Opening, Steel, Zinc Plated National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring Koch Spring Snap Link, Rigid Round Eye, 7/16 in Eye X 3-1/8 in Length X 5/16 in Opening, Zinc Plated
Koch 245211 Rigid Round Eye Spring Snap Link SNAP SPRG INTRLK ZN 5/8X4.72IN QUICK LINK SS 1/4
Koch Spring Snap Link, Rigid Round Eye, 1/4 in Eye X 2 in Length X 3/16 in Opening, Zinc Plated Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. Baron Quick Link, 1/4 in Thick x 2-1/4 in OAL, 9/32 in Jaw Opening, 316 Stainless Steel, 660 lb Load Capacity
National Hardware 3150BC Quick Link National Hardware 3112BC Interlocking Spring Snap National Hardware 3112BC Interlocking Spring Snap
National Hardware Quick Link, Series: 3150BC, 3/8 in, Steel, Zinc Plated, 2640 lb Load Capacity, For Fast, Easy Connections Between Two Lengths of Chain or For Attaching Accessories to Chain National Hardware Spring Snap, Interlocking, Series: 3112BC, 315 lb Load Capacity, 1/2 in Snap Opening, 1-3/8 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications National Hardware Spring Snap, Interlocking, Series: 3112BC, 360 lb Load Capacity, 1/2 in Snap Opening, 3-15/16 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications
SPRING SNAP LINK SS 1/4       Baron C-2450-3/8 Snap Link Koch 93121 Quick Link
Baron Spring Snap, 5/16 in Snap Opening, 1/4 in Eye Width, 2-3/8 in Overall Length, Stainless Steel Baron Snap Link, 3/8 in Diameter X 4 in Overall Length X 1/2 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks Steel construction with threaded nut.
National Hardware 3167BC Quick Link Baron C-2450-1/2 Snap Link SNAP SPRG INTRLK ZN 3/4X5.51IN
QUICK LINKS 1/8IN SS
Our Price: $4.65
National Hardware Quick Link, Series: 3167BC, 1/8 in, Stainless Steel, 300 lb Load Capacity, BHMA A138.18, For Marine and Other Outdoor Applications Baron Snap Link, 1/2 in Diameter X 5-1/2 in Overall Length X 3/4 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
SPRING SNAP INTRLOCK SS 1/4   Koch 243241 Spring Snap Baron C-7350T-3/8 Quick Link
Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use Designed for use with rope, chain, strap, animal leashes and other home, farm an recreational applications. Baron Quick Link, 3/8 in Chain, 3-1/8 in Overall Length X 7/16 in Jaw Opening, Steel, Zinc Plated
Campbell T5423300 Twin Clevis Link National Hardware 3167BC Quick Link National Hardware 3167BC Quick Link
QUICK LINKS 3/16IN SS
Our Price: $5.33
QUICK LINKS 1/4IN SS
Our Price: $5.34
For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16" National Hardware Quick Link, Series: 3167BC, 3/16 in, Stainless Steel, 1150 lb Load Capacity, BHMA A138.18, For Marine and Other Outdoor Applications National Hardware Quick Link, Series: 3167BC, 1/4 in, Stainless Steel, 1800 lb Load Capacity, BHMA A138.18, For Marine and Other Outdoor Applications
National Hardware 3150BC Quick Link LINK CLEVIS DBL 1/4&5/16IN    QUICK LINK ZINC 1/8
National Hardware Quick Link, Series: 3150BC, 1/2 in, Steel, Zinc Plated, 3300 lb Load Capacity, For Fast, Easy Connections Between Two Lengths of Chain or For Attaching Accessories to Chain Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Factory number indicated thickness (inches).
LINK CLVS DBL 5/16IN          Baron 82180/196 Double Clevis Link SNAP SPRG INTRLK ZNC 1X4.2IN
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
SPRING SNAP LINK SS 5/16      SPRING SNAP INTRLOCK SS 5/16  QUICK LINK SS 5/16
Baron Spring Snap, 280 lb, 3/8 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Stainless Steel, Zinc Plated, Includes: Spring Hooks Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Lifting, Pulling, Mooring And Other Farm, Marine and Recreational Applications Baron Quick Link, 5/16 in Thick x 2-15/16 in OAL, 3/8 in Jaw Opening, 316 Stainless Steel, 1540 lb Load Capacity
National Hardware 3166BC Interlocking Spring Snap National Hardware 3248BC Double Clevis Link SPRING SNAP LINK SS 11/32
National Hardware Spring Snap, Interlocking, Series: 3166BC, 400 lb Load Capacity, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications National Hardware Clevis Link, Double, Series: 3248BC, Suitable For Use With: Chain of an Equal or Lower Grade, 3/8 in, Forged Steel, Zinc Plated, 5400 lb Load Capacity, Grade 43 Specifications, For Making Quick Connections With Two Chains in Industrial and Construction Applications Baron Spring Snap, 160 lb, 1/2 in Snap Opening, 11/32 in Eye Width, 3-1/2 in Overall Length, Stainless Steel, Zinc Plated
Baron 81380/196 Double Clevis Link QUICK LINK SS 3/8             National Hardware 3167BC Quick Link
QUICK LINKS 5/16IN SS
Our Price: $8.09
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Baron Quick Link, 3/8 in Thick x 1-3/8 in OAL, 7/16 in Jaw Opening, 316 Stainless Steel National Hardware Quick Link, Series: 3167BC, 5/16 in, Stainless Steel, 2500 lb Load Capacity, BHMA A138.18, For Marine and Other Outdoor Applications
LINK CLVS 3/8IN               Campbell T5423301 Twin Clevis Link SPRING SNAP INTRLOCK SS 3/8
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16" Baron Spring Snap, Interlocking, 400 lb, 11/16 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use
National Hardware 3166BC Interlocking Spring Snap LOCK SNGL DEADBOLT 663-3      LOCK SNGL DEADBOLT 663-26D
National Hardware Spring Snap, Interlocking, Series: 3166BC, 800 lb Load Capacity, 7/16 in Snap Opening, 9/16 in Eye Width, 3-1/4 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security.
National Hardware 3167BC Quick Link LINK CLVS DBL ZN PLT 1/2IN    QUICK LINK ZN 1/4
QUICK LINKS 3/8IN SS
Our Price: $10.04
National Hardware Quick Link, Series: 3167BC, 3/8 in, Stainless Steel, 3000 lb Load Capacity, BHMA A138.18, For Marine and Other Outdoor Applications Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Factory number indicated thickness (inches).
Baron 82480/196 Double Clevis Link SPRING SNAP LINK SS 3/8       National Hardware 3166BC Interlocking Spring Snap
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Baron Spring Snap, 400 lb, 1/2 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel National Hardware Spring Snap, Interlocking, Series: 3166BC, 925 lb Load Capacity, 5/8 in Snap Opening, 4-11/16 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications
Campbell T5423302 Twin Clevis Link LINK CLVS 1/2IN               Campbell T4900324FR Cold Shut
Forged steel; finish is Zinc Plated. For use with Proof Coil or High Test chain. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
SPRING SNAP LINK SS 7/16      LINK CLVS DBL ZN PLT 5/8IN    SPRING SNAP INTRLOCK SS 7/16
Baron Spring Snap, 320 lb, 5/8 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, Polished, For Marine, Industrial and Agricultural Use Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Baron Spring Snap, Interlocking, 1100 lb, 3/4 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, For Lifting, Pulling, Marine, Recreational Mooring and Other Farm Applications
LOCK DEADBOLT SNGL CYL SAT NIC National Hardware 3166BC Interlocking Spring Snap QUICK LINK ZN 5/16
Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. National Hardware Spring Snap, Interlocking, Series: 3166BC, 1100 lb Load Capacity, 3/4 in Snap Opening, 15/16 in Eye Width, 4-3/4 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Factory number indicated thickness (inches).
LOCK DEADBOLT SNGL CYL AGEDBRZ LOCK SNGL SIDE DEADBOLT 667-3 LOCK SNGL SIDE DEADBOLT667-26D
Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security.
Kwikset 660 Signature Single Cylinder Light Duty Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Kwikset 660 26D Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt LOCK D-CYL DEADBOLT 665-11P
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
DEADBOLT SS SGL CYL MOBILEHOME DEADBOLT SINGLE CYL SS KA3 BOX DEADBOLT SINGLE CYL S/S KA3 VP
Operated by key outside and turn piece inside. Adjustable backset. Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4".
MBLE HME DEADBOLT SGL CYL PB  Kwikset 9803 Signature Single Cylinder Dead Bolt DEADBOLT SINGLE CYL G2 DB2051
Operated by key outside and turn piece inside. Adjustable backset. Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Grade 2 Single Cyl. Deadbolt - Standard duty commercial grade constructed with a tubular steel chassis, keyed with thumb turn interior, adjustable back set and featuring a Schlage 6-pin solid brass keyway with 2 nickel keys per lock; roller bar for added security against hacksaw and reciprocating saw attacks. ANSI compliant and rated for 150,000 cycles.
DEADBOLT SINGLE CYL PB KA3 VP QUICK LINK ZN 1/2             DEADBOLT SINGLE CYL PB KA3 BOX
Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Factory number indicated thickness (inches). Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4".
Kwikset 98015 Signature Single Cylinder Dead Bolt MBLE HME DEADBOLT DBLE CYL SS DEADBOLT DBL CYL SS KA3 BOX PK
Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Can be locked or unlocked by key on both sides. Adjustable latch. Locked or unlocked by key on both sides.
DEADBOLT DBL CYL PB KA3 BOX PK MBLE HME DEADBOLT DBL CYL PB  DEADBOLT SINGLE CYL 6-WAY PB
Locked or unlocked by key on both sides. Can be locked or unlocked by key on both sides. Adjustable latch. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes.
DEADBOLT SNGL CYL 6-WAY ANTBRS DEADBOLT SINGLE CYL 6-WAY S/S Kwikset 980 Signature Single Cylinder Dead Bolt
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
AUSTIN SC DEADBOLT SAT NCKL CP AUSTIN SC DBOLT VBRONZE CP    Kwikset 7803 Signature Single Cylinder Dead Bolt
Austin's rustic style brings a new level of charm and appeal to any space, whether in the city or country; for use on exterior doors where keyed entry and security is needed; featuring "SmartKey" Re-key technology; re-key the lock yourself in seconds in 3 easy steps; single cylinder deadbolt operates by key outside and thumbturn inside; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty. Austin's rustic style brings a new level of charm and appeal to any space, whether in the city or country; for use on exterior doors where keyed entry and security is needed; featuring "SmartKey" Re-key technology; re-key the lock yourself in seconds in 3 easy steps; single cylinder deadbolt operates by key outside and thumbturn inside; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DEADBOLT SNGL CYL 6-WAY SATIN DEADBOLT DBL CYLINDER S/S KA3 DEADBOLT DBL CYLINDER PB KA3
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Locked or unlocked by key on both sides. Locked or unlocked by key on both sides.
Kwikset 7805 Signature Single Cylinder Dead Bolt Kwikset 780 Signature Single Cylinder Dead Bolt Kwikset 780 Signature Single Cylinder Dead Bolt
Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Kwikset 780L Signature Single Cylinder Dead Bolt LOCK SNGL CYL DEADBOLT 780-11P LOCK SNGL CYL DEADBOLT 780-26D
Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DEADBOLT DOUBLE CYL G2 DB2041 Kwikset 985 Signature Double Cylinder Dead Bolt DEADBOLT SINGLE CYL GRADE2 SAT
Grade 2 Double Cyl. Deadbolt - Standard duty commercial double cylinder features a tubular construction; complies with ANSI A156.5, Grade 2 (150,000 cycles). It has a 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 1-3/4"; has an adjustable backset. Operated by key on both sides. Signature Series' deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. This design includes "BumpGuard" for improved security against lock bumping. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. ANSI/BHMA: Grade 1. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
DEADBOLT DOUBLE CYL 6-WAY S/S DEADBOLT DOUBLE CYL 6-WAY PB  Kwikset 785 Signature Double Cylinder Dead Bolt
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Operated by key both sides. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". CYLINDER:  5-pin SmartKey . Rekeys to existing Titan, Kwikset and other manufacturers' keys. FACEPLATES:  1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4". BOLT: Brass bolt, full 1" throw, Titanium allow throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1.
DEADBOLT DBL CYL 6-WAY ANT BRS Kwikset 816 Signature Single Cylinder Dead Bolt Kwikset 816 Signature Double Cylinder Dead Bolt
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA. Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA.
DEADBOLT SINGLE CYL MATTE BLK Kwikset 816 Signature Double Cylinder Dead Bolt Kwikset 985 Signature Double Cylinder Dead Bolt
For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA. Operated by key on both sides. Signature Series' deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. This design includes "BumpGuard" for improved security against lock bumping. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. ANSI/BHMA: Grade 1. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DEADBOLT DBL CYL 6-WAY SAT NIC Kwikset 985 Signature Double Cylinder Dead Bolt DEADBOLT DOUBLE CYL AGED BRZ
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Operated by key on both sides. Signature Series' deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. This design includes "BumpGuard" for improved security against lock bumping. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. ANSI/BHMA: Grade 1. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key from either side; bolt automatically deadlocks when fully thrown. 7/8'' wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3'' screws protects against kick-in attacks. Solid, 1 piece design to protect against hammer and crowbar prying attacks. 2-1/2'' steel adapter ring, plated to match, provided for accommodating 2-1/8'' crossbore. DOOR PREP: 1-1/2'' or 2-1/8'' Crossbore; 7/8'' Edge Bore; 1'' x 2-1/4'' Latch Face. DOOR THICKNESS: 1-3/8'' to 1-3/4''. CYLINDER: Solid brass, 5-pin, tumbler C keyway with nickel silver,pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1'' x 2-1/4''. STRIKES: 1-1/8'' x 2-3/4'', no lip, with dust box and door frame reinforcer. BOLT: 7/8'' housing and 1'' throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4'' or 2-3/8'' backset; square corner, round corner, or drive-in preps. SECURE KEY feature allows you to re-key the lock without ever removing it from the door.
Kwikset 785 Signature Double Cylinder Dead Bolt DEADBOLT DBL CYL GRADE 2 SATIN DEADBOLT SNGL CYL 6-WAY BRONZE
Operated by key both sides. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". CYLINDER:  5-pin SmartKey . Rekeys to existing Titan, Kwikset and other manufacturers' keys. FACEPLATES:  1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4". BOLT: Brass bolt, full 1" throw, Titanium allow throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1. Operated by key outside and inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes.
Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660-5RC Signature Single Cylinder Dead Bolt
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt DEADBOLT DBL CYL 6-WAY BRONZE
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
Kwikset 665 Signature Double Cylinder Dead Bolt Kwikset 6655R Signature Double Cylinder Dead Bolt Kwikset 665 Signature Double Cylinder Dead Bolt
Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 6603 Signature Single Cylinder Dead Bolt Kwikset 660M3 Signature Single Cylinder Dead Bolt
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. 2-3/8" backset latch with no faceplate. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. STRIKES: 1" x 2-1/4". BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
Kwikset 660M26D Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. 2-3/8" backset latch with no faceplate. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. STRIKES: 1" x 2-1/4". BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
Schlage BE365V PLY 505 Single Cylinder Dead Bolt Kwikset 909 Signature Single Cylinder Dead Bolt Kwikset 909 Signature Single Cylinder Dead Bolt
Turn-Lock feature allows the user to lock and leave without a key. Ideal for front, back and side entry doors where deadbolts are required. Grade 2 ANSI/BHMA certified. Commercial grade clutching motor drive. Vandal resistant free-spinning deadbolt turn. Code control; 6-digit programming code required to add and delete user codes. Warning sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Blue LEDs illuminate the keypad on demand. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. LATCH: 1" x 2-1/4" radius corner faceplate, 1" housing diameter - requires 1" edge bore, 1" throw with Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-1/8" x 2-3/4", square corner, no box, latch strike. BACKSET: adjustable backset, fits 2-3/8" to 2-3/4" backsets. CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). DOOR THICKNESS: 1-3/8" to 1-3/4". KEYS: nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons. Operated by key outside and thumbturn inside. Keyless entry deadbolt with one touch, motorized locking mechanism. Back-lit keypad for increased visibility. Two customizable access codes. Includes "SmartKey" feature for rekeying without removal from door. Replaces traditional pin-and-tumbler design. Requires (4) AA batteries (NOT INCLUDED). DOOR THICKNESS: 1-3/8" to 2". DOOR PREP: 2-1/8" diameter face hole and 1" diameter latch hole. Adjustable 2-3/8" to 2-3/4" backset. 1" x 2-1/4" round corner standard faceplate. STRIKES: Round corner 2-3/4" x 2-1/8". LATCH: Round corner adjustable 2-3/8" x 2-3/4". BOLT: 1" throw, steel deadbolt. HANDING: Reversible for right or left hand doors. Operated by key outside and thumbturn inside. Keyless entry deadbolt with one touch, motorized locking mechanism. Back-lit keypad for increased visibility. Two customizable access codes. Includes "SmartKey" feature for rekeying without removal from door. Replaces traditional pin-and-tumbler design. Requires (4) AA batteries (NOT INCLUDED). DOOR THICKNESS: 1-3/8" to 2". DOOR PREP: 2-1/8" diameter face hole and 1" diameter latch hole. Adjustable 2-3/8" to 2-3/4" backset. 1" x 2-1/4" round corner standard faceplate. STRIKES: Round corner 2-3/4" x 2-1/8". LATCH: Round corner adjustable 2-3/8" x 2-3/4". BOLT: 1" throw, steel deadbolt. HANDING: Reversible for right or left hand doors.
Kwikset 909 Signature Single Cylinder Dead Bolt Kwikset 780 Signature Single Cylinder Dead Bolt Schlage BE365V CAM 716 Single Cylinder Dead Bolt
Operated by key outside and thumbturn inside. Keyless entry deadbolt with one touch, motorized locking mechanism. Back-lit keypad for increased visibility. Two customizable access codes. Includes "SmartKey" feature for rekeying without removal from door. Replaces traditional pin-and-tumbler design. Requires (4) AA batteries (NOT INCLUDED). DOOR THICKNESS: 1-3/8" to 2". DOOR PREP: 2-1/8" diameter face hole and 1" diameter latch hole. Adjustable 2-3/8" to 2-3/4" backset. 1" x 2-1/4" round corner standard faceplate. STRIKES: Round corner 2-3/4" x 2-1/8". LATCH: Round corner adjustable 2-3/8" x 2-3/4". BOLT: 1" throw, steel deadbolt. HANDING: Reversible for right or left hand doors. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Turn-Lock feature allows the user to lock and leave without a key. Ideal for front, back and side entry doors where deadbolts are required. Grade 2 ANSI/BHMA certified. Commercial grade clutching motor drive. Vandal resistant free-spinning deadbolt turn. Code control; 6-digit programming code required to add and delete user codes. Warning sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Blue LEDs illuminate the keypad on demand. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. LATCH: 1" x 2-1/4" radius corner faceplate, 1" housing diameter - requires 1" edge bore, 1" throw with Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-1/8" x 2-3/4", square corner, no box, latch strike. BACKSET: adjustable backset, fits 2-3/8" to 2-3/4" backsets. CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). DOOR THICKNESS: 1-3/8" to 1-3/4". KEYS: nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons.
Schlage BE365V CAM 619 Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt Schlage B60NV609KA4 Single Cylinder Dead Bolt
Turn-Lock feature allows the user to lock and leave without a key. Ideal for front, back and side entry doors where deadbolts are required. Grade 2 ANSI/BHMA certified. Commercial grade clutching motor drive. Vandal resistant free-spinning deadbolt turn. Code control; 6-digit programming code required to add and delete user codes. Warning sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Blue LEDs illuminate the keypad on demand. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. LATCH: 1" x 2-1/4" radius corner faceplate, 1" housing diameter - requires 1" edge bore, 1" throw with Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-1/8" x 2-3/4", square corner, no box, latch strike. BACKSET: adjustable backset, fits 2-3/8" to 2-3/4" backsets. CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). DOOR THICKNESS: 1-3/8" to 1-3/4". KEYS: nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
Kwikset 780 Signature Single Cylinder Dead Bolt DEADBOLT SINGLE CYL SAT CHROME Schlage B60NV505 KA4 Single Cylinder Dead Bolt
Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
DEADBOLT KEYPAD BRASS TUSTIN  DEADBOLT KEYPAD SAT NIC TUSTIN DEADBOLT KEYPAD VBZ TUSTIN
Secured keyless entry convenience; one touch locking; dramatically reduced interior size and sleek metal design; 16 user codes plus master code feature for added security; 10 digit backlit keypad with dedicated lock button; BHMA grade 2 certified; "SmartKey" technology - the lock you can re-ksy yourself in seconds in three easy steps; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks; installs in minutes with just a screw driver no hard wiring needed; fits standard doors (1-3/8" - 2"); no new screw holes required; use and opeartes on (4) AA batteries. Secured keyless entry convenience; one touch locking; dramatically reduced interior size and sleek metal design; 16 user codes plus master code feature for added security; 10 digit backlit keypad with dedicated lock button; BHMA grade 2 certified; "SmartKey" technology - the lock you can re-ksy yourself in seconds in three easy steps; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks; installs in minutes with just a screw driver no hard wiring needed; fits standard doors (1-3/8" - 2"); no new screw holes required; use and opeartes on (4) AA batteries. Secured keyless entry convenience; one touch locking; dramatically reduced interior size and sleek metal design; 16 user codes plus master code feature for added security; 10 digit backlit keypad with dedicated lock button; BHMA grade 2 certified; "SmartKey" technology - the lock you can re-ksy yourself in seconds in three easy steps; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin & tumbler locks; installs in minutes with just a screw driver no hard wiring needed; fits standard doors (1-3/8" - 2"); no new screw holes required; use and opeartes on (4) AA batteries.
Kwikset 665 Signature Double Cylinder Dead Bolt Kwikset 665 Signature Double Cylinder Dead Bolt DEADBOLT TOUCH SATIN NICKEL
Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Numeric touchscreen: Fingerprint-resistant; works in the rain and when you're wearing gloves. Slim profile: sleek without sacrificing strength; easily fits between the front door and screen door. Durable, Smart Design: Grade 2 security rating, for strong performance across a range of residential applications; 2-year battery life with a 9V battery backup. LED Down Lighting: illuminates the numbers when needed. Dedicated Icons: for both low battery and programming mode. Enhanced Security: 100% bump-proof; 100% pick-proof. Exceptional Convenience: no more cutting keys or re-keying locks; installs in minutes with just a screwdriver; memory for 19 access codes; no more keys to lose, hide, carry or forget.
DEADBOLT TOUCH AGED BRONZE    Schlage B60NV619 KA4 Single Cylinder Dead Bolt Kwikset 665 Signature Double Cylinder Dead Bolt
DEADBOLT TOUCH AGED BRONZE
Our Price: $134.28
Numeric touchscreen: Fingerprint-resistant; works in the rain and when you're wearing gloves. Slim profile: sleek without sacrificing strength; easily fits between the front door and screen door. Durable, Smart Design: Grade 2 security rating, for strong performance across a range of residential applications; 2-year battery life with a 9V battery backup. LED Down Lighting: illuminates the numbers when needed. Dedicated Icons: for both low battery and programming mode. Enhanced Security: 100% bump-proof; 100% pick-proof. Exceptional Convenience: no more cutting keys or re-keying locks; installs in minutes with just a screwdriver; memory for 19 access codes; no more keys to lose, hide, carry or forget. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3.
Kwikset 665 Signature Double Cylinder Dead Bolt Kwikset 785 Signature Double Cylinder Dead Bolt Schlage B60N605 Single Cylinder Dead Bolt
Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Operated by key both sides. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". CYLINDER:  5-pin SmartKey . Rekeys to existing Titan, Kwikset and other manufacturers' keys. FACEPLATES:  1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4". BOLT: Brass bolt, full 1" throw, Titanium allow throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 1. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
Schlage B60NV620 Single Cylinder Dead Bolt Schlage B60NV716 Single Cylinder Dead Bolt Schlage B60N626 Single Cylinder Dead Bolt