Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > DUMMY DOOR HANDLES > DUMMY DOOR HANDLES - KNOB
Choose a sub category:
CLASSROOM LOCKS - KNOB CLASSROOM LOCKS - LEVER
Sort By:
1
National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link SHUT COLD ZINC PLATED 3/16IN
LAP LINKS 1/8IN ZN PLT
Our Price: $0.73
LAP LINKS 3/16IN ZN PLT
Our Price: $0.76
National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
Campbell T5950124 Repair Lap Link SPRING SNAP STEEL ZN 3/16     Campbell T4900324 Cold Shut
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3153BC Cold Shut National Hardware 3152BC Lap Link Campbell T4900424 Cold Shut
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.03
LAP LINKS 1/4IN ZN PLT
Our Price: $1.03
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3153BC Cold Shut Campbell T4900524 Cold Shut Campbell T4900624 Cold Shut
National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Baron 2450-1/4 Snap Link SHUT COLD ZINC PLATED 3/8IN   SNAP LINK 9/32
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.50
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
SPRING SNAP ASST AL 5/16      SNAP SPRG INTRLK ZN 1/4X2IN   National Hardware 3152BC Lap Link
LAP LINKS 5/16IN ZN PLT
Our Price: $1.76
Baron Spring Snap, 75 lb, 1/2 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Aluminum Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. National Hardware Lap Link, Series: 3152BC, 5/16 in, Steel, Zinc Plated, 725 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
Lehigh 7035BM-2P30 Assorted Spring Snap Link SPRING SNAP STEEL ZN 11/32    Campbell T5950724 Repair Lap Link
Ideal for securing keys and accessories. Versatile for students, hikers, bikers, boaters, hunters, contractors and maintenance workers. Assorted vibrant colors. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
SNAP LINK 5/16                K & S 501 Music Wire National Hardware 3152BC Lap Link
LAP LINKS 3/8IN ZN PLT
Our Price: $2.09
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. K & S Music Wire, 0.032 in Wire, 36 ft Length National Hardware Lap Link, Series: 3152BC, 3/8 in, Steel, Zinc Plated, 1450 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain
K & S 500 Music Wire K & S 497 Music Wire K & S 503 Music Wire
K & S Music Wire, .025 in Wire, 36 ft Length, Spring Steel, ASTM A228, 341000 - 377000 psi Tensile K & S Music Wire, 0.039 in Wire, 36 ft Length, Spring Steel, ASTM A228, 318000 - 352000 psi Tensile K & S Music Wire, 0.55 in Wire, 36 ft Length, Spring Steel, ASTM A228, 300000 - 331000 psi Tensile
National Hardware 3153BC Cold Shut Campbell T9001424 Eye Grab Hook National Hardware TP3113BC Interlocking Spring Snap
National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. National Hardware Interlocking Spring Snap, Series: TP3113BC, 50 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Aluminum, Steel, Multi-Color, For Quick Attachment of Gear, Keys, Tools and Other Equipment
Campbell T4900824 Cold Shut Campbell T5950924 Repair Lap Link K & S 502 Music Wire
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. K & S Music Wire, 0.047 in Wire, 36 ft Length, Spring Steel, ASTM A228, 300000 - 331000 psi Tensile
K & S 505 Music Wire K & S 506 Music Wire National Hardware 3153BC Cold Shut
COLD SHUTS 1/2IN ZN PLT
Our Price: $2.68
K & S Music Wire, 5/64 in Wire, 36 ft Length, Spring Steel, ASTM A228, 282000 - 312000 psi Tensile K & S Music Wire, 3/32 in Wire, 36 ft Length, Spring Steel, ASTM A228, 274000 - 303000 psi Tensile National Hardware Cold Shut, Series: 3153BC, 1/2 in, 0.47 in Rod Diameter, 0.52 in Hole Diameter, Steel, Zinc Plated, 4500 lb Load Capacity, 2.64 in Width, For Use to Couple Chain Attachments
Cambell T9501424 Clevis Grab Hook LINK LAP ZINC PLATED 1/2IN    Wellington 7038CG-50FB Spring Snap Link
LAP LINKS 1/2IN ZN PLT
Our Price: $2.82
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Designed for joining two lengths of chain together or accessories to a chain. Link can be closed with a hammer or vise. Links must be completely closed to perform at rated capacity. Manufactured from steel. 3" aluminum camouflage gear clips, glossy assortment, 50 pcs in fish bowl container.
SNAP SPRG ASST COLOR 3-1/8IN  Koch 086211 Eye Grab Hook Campbell T9001524 Eye Grab Hook
National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring Drop forged construction, zinc plated. Used to easily join attachments to welded chain or wire rope. Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT.
National Hardware 3112BC Interlocking Spring Snap Koch 245291 Rigid Round Eye Spring Snap Link National Hardware 3244BC Removable Eye Grab Hook
CHAIN HOOK 1/4IN BLUE
Our Price: $3.27
National Hardware Interlocking Spring Snap, Series: 3112BC, 165 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Steel, Zinc Plated, Gray, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Koch Spring Snap Link, Rigid Round Eye, 3/8 in Eye X 2-3/4 in Length X 9/32 in Opening, Zinc Plated National Hardware Eye Grab Hook, Removable, Series: 3244BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, For Industrial and Construction Applications
Baron 2450-3/8 Snap Link Koch 243231 Assorted Spring Link SNAP SPRG CAMO ALU/STL 3-1/8IN
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed for use with rope, chain, strap, animal leashes and other home, farm an recreational applications. National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring
Koch 245341 Rigid Round Eye Spring Snap Link Koch 245211 Rigid Round Eye Spring Snap Link SNAP SPRG INTRLK ZN 5/8X4.72IN
Koch Spring Snap Link, Rigid Round Eye, 7/16 in Eye X 3-1/8 in Length X 5/16 in Opening, Zinc Plated Koch Spring Snap Link, Rigid Round Eye, 1/4 in Eye X 2 in Length X 3/16 in Opening, Zinc Plated Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
HOOK EYE GRB BLU STL 5/16IN   Cambell T9501524 Clevis Grab Hook Baron 660-1/2 Lap Link
CHAIN HOOK 5/16IN BLUE
Our Price: $3.95
Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Used to connect two pieces of chain - or chain to eyelet, snap, ring, etc.
National Hardware 3112BC Interlocking Spring Snap National Hardware 3112BC Interlocking Spring Snap SPRING SNAP LINK SS 1/4
National Hardware Spring Snap, Interlocking, Series: 3112BC, 315 lb Load Capacity, 1/2 in Snap Opening, 1-3/8 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications National Hardware Spring Snap, Interlocking, Series: 3112BC, 360 lb Load Capacity, 1/2 in Snap Opening, 3-15/16 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Baron Spring Snap, 5/16 in Snap Opening, 1/4 in Eye Width, 2-3/8 in Overall Length, Stainless Steel
Baron C-2450-3/8 Snap Link Campbell T9001624 Eye Grab Hook Baron C-2450-1/2 Snap Link
Baron Snap Link, 3/8 in Diameter X 4 in Overall Length X 1/2 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. Baron Snap Link, 1/2 in Diameter X 5-1/2 in Overall Length X 3/4 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks
SNAP SPRG INTRLK ZN 3/4X5.51IN SPRING SNAP INTRLOCK SS 1/4   National Hardware 3240BC Removable Clevis Grab Hook
CHAIN HOOK 1/4IN BLUE
Our Price: $4.84
Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, For Industrial and Construction Applications
National Hardware 3244BC Removable Eye Grab Hook Cambell T9501624 Clevis Grab Hook Baron C-330-1/4 Clevis Grab Hook
CHAIN HOOK 3/8IN BLUE
Our Price: $5.36
National Hardware Eye Grab Hook, Removable, Series: 3244BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, For Industrial and Construction Applications DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Baron Clevis Grab Hook, 1/4 in Opening, 2600 lb, Forged Alloy Steel, Electro Galvanized
Campbell T9503415 Clevis Grab Hook KNOB DUMMY T3 POLISHED BRASS  HOOK GRAB CLVS ZN PLT 5/16IN
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting.
KNOB DUMMY T3 STAINLESS STEEL Kwikset Tylo 488T3CP Signature Bell Shaped Dummy Door Knob Kwikset Tylo 488T26DCP Signature Bell Shaped Dummy Door Knob
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation. Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation.
National Hardware 3240BC Removable Clevis Grab Hook KNOB DUMMY TS STAINLESS STEEL HOOK CLVS GRB CHRMT/YEL 1/4IN
CHAIN HOOK 5/16IN BLUE
Our Price: $5.97
National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 5/16 in Opening, 3900 lb, Forged Steel, Blue, For Industrial and Construction Applications Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
Baron C-330-5/16 Clevis Grab Hook Campbell T5950024 Repair Lap Link National Hardware 3253BC Removable Clevis Grab Hook
Baron Clevis Grab Hook, 5/16 in Opening, 3900 lb, Forged Alloy Steel, Electro Galvanized For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. National Hardware Clevis Grab Hook, Removable, Series: 3253BC, 5/16 in Opening, 4700 lb, Forged Steel, Chromate, Yellow, For Industrial and Construction Applications
Campbell T9503515 Clevis Grab Hook KNOBSET DUMMY SERIES T3 SATIN SNAP SPRG INTRLK ZNC 1X4.2IN
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
SPRING SNAP LINK SS 5/16      Kwikset Tylo 488T5CP Signature Bell Shaped Dummy Door Knob SPRING SNAP INTRLOCK SS 5/16
Baron Spring Snap, 280 lb, 3/8 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Stainless Steel, Zinc Plated, Includes: Spring Hooks Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation. Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Lifting, Pulling, Mooring And Other Farm, Marine and Recreational Applications
KNOB DUMMY T3 ANTIQUE BRASS   KNOB DUMMY TS POLISHED BRASS  Mintcraft TS Tubular Dummy Door Knob Set
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction.
KNOB DUMMY TS ANTIQUE BRASS   National Hardware 3166BC Interlocking Spring Snap DOOR KNOB DUMMY SATIN NICKEL
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. National Hardware Spring Snap, Interlocking, Series: 3166BC, 400 lb Load Capacity, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation.
Kwikset Polo 488P3CP Signature Half Inactive Dummy Door Knob HOOK CLVS GRB CHRMT/YEL 3/8IN SPRING SNAP LINK SS 11/32
Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting. Baron Spring Snap, 160 lb, 1/2 in Snap Opening, 11/32 in Eye Width, 3-1/2 in Overall Length, Stainless Steel, Zinc Plated
Mintcraft TF 6-Way Adjustable Ball Dummy Door Knob KNOBSET DUMMY SERIES TF POLBRS National Hardware 3240BC Removable Clevis Grab Hook
CHAIN HOOK 3/8IN BLUE
Our Price: $7.93
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, For Industrial and Construction Applications
Kwikset Tylo 488T5 Signature Bell Shaped Dummy Door Knob Kwikset Tylo 488T3 Signature Bell Shaped Dummy Door Knob Kwikset Polo 488P15CP Signature Half Inactive Dummy Door Knob
Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation. Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation. Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim.
Kwikset Polo 488P5CP Signature Half Inactive Dummy Door Knob Mintcraft TF 6-Way Adjustable Dummy Door Knob KNOBSET DUMMY SERIES TF ANTBRS
Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction.
Kwikset Tylo 488T26D Signature Bell Shaped Dummy Door Knob Kwikset Polo 488P3 Signature Half Inactive Dummy Door Knob KNOB DOOR DUMMY SAT NIC CORONA
Surface mounted, bell-shaped knobs for doors where only a simple pull is required. No operation. Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
KNOB DOOR DUMMY SATNIC STRATUS KNOB DUMMY EGG SHAPE SATIN NIC HOOK CLVS GRB BLU STL 7/16IN
CHAIN HOOK 7/16IN BLUE
Our Price: $9.05
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Surface mounted for doors where only a pull is required. No operation. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting.
Kwikset Cove 488CV11PCP Signature Dummy Door Knob HOOK EYE GRB BLU STL 1/2IN    Kwikset Polo 488P11P Signature Half Inactive Dummy Door Knob
CHAIN HOOK 1/2IN BLUE
Our Price: $9.06
Surface mounted, Colonial style knobs for doors where only a simple pull is required. No operation. Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim.
Kwikset Polo 488P15 Signature Half Inactive Dummy Door Knob SPRING SNAP INTRLOCK SS 3/8   Baron C-330-3/8 Clevis Grab Hook
Surface mounted for doors where only a simple pull is required. Rounded design to proportionally fit the palm of the hand. No operation. SGL Dummy Trim. Baron Spring Snap, Interlocking, 400 lb, 11/16 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use Baron Clevis Grab Hook, 3/8 in Opening, 5400 lb, Forged Alloy Steel, Electro Galvanized
National Hardware 3166BC Interlocking Spring Snap LOCK SNGL DEADBOLT 663-3      LOCK SNGL DEADBOLT 663-26D
National Hardware Spring Snap, Interlocking, Series: 3166BC, 800 lb Load Capacity, 7/16 in Snap Opening, 9/16 in Eye Width, 3-1/4 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security.
KNOB DOOR DUMMY AGEDBRZ CORONA KNOB DOOR DUMMY AGEDBRZSTRATUS KNOBSET DUMMY SERIES TF SATIN
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction.
Mintcraft Tyl Hollow Egg Dummy Door Knob KNOBSET DUMMY SERIES TF BRONZE K & S 509 Music Wire
Surface mounted for doors where only a pull is required. No operation. TF dummy knobset, aged bronze finish. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. K & S Music Wire, 3/16 in Wire, 36 ft Length, Steel, ASTM A228
Campbell T5950324 Repair Lap Link Campbell T4900324FR Cold Shut Kwikset Juno 788 Signature Half Inactive Dummy Door Knob
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Decorative circular shaped knob. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA  Grade 2 Security.
HOOK CLVS GRB BLUE 1/2IN      Kwikset Cove 488CV15 Signature Dummy Door Knob Kwikset Cove 488CV11P Signature Dummy Door Knob
CHAIN HOOK 1/2IN BLUE
Our Price: $10.82
National Hardware Clevis Grab Hook, Series: N177, 9200 lb Load Capacity, Forged Steel, Blue, Standards: Meets Grade 43, For Use With Chain Of An Equal or Lower Grade in Industrial and Construction Applications Surface mounted, Colonial style knobs for doors where only a simple pull is required. No operation. Surface mounted, Colonial style knobs for doors where only a simple pull is required. No operation.
SPRING SNAP LINK SS 3/8       National Hardware 3166BC Interlocking Spring Snap Schlage F170 Plymouth Decorative Round Dummy Door Knob
Baron Spring Snap, 400 lb, 1/2 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel National Hardware Spring Snap, Interlocking, Series: 3166BC, 925 lb Load Capacity, 5/8 in Snap Opening, 4-11/16 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Used for door pull or as matching inactive trim for one side of door.
Schlage F170 Decorative Dummy Door Knob Mintcraft Tyl Tubular Dummy Door Knob Set KNOB DUMMY TYL TUBULAR BRONZE
Used for door pull or as matching inactive trim for one side of door. Surface mounted for doors where only a pull is required. No operation. Surface mounted for doors where only a pull is required. No operation.
Kwikset Hancock 788H3BX Signature Dummy Door Knob Kwikset Juno 788 Signature Half Inactive Dummy Door Knob Cambell T9501824 Clevis Grab Hook
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. Decorative circular shaped knob. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA  Grade 2 Security. Designed to be used with Grade 43 or Grade 30 Chain. Heat treated pins. Hooks are heat treated and tempered. Hooks embossed with chain grade, fractional size, and country of origin. Hooks embossed with trace code providing traceability through manufacturing and testing process to heat of steel. Design ultimate strength equals 3 times working load limit, matching NACM specifications. Grab hooks are designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Kwikset Cameron Signature 97880-745 Seamless Dummy Door Knob K & S 508 Music Wire Kwikset Juno 788 Signature Half Inactive Dummy Door Knob
Classic lines and enhanced styling knob to fit many design interiors. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Installs in minutes with just a screwdriver. ANSI/BHMA Grade 2. K & S Music Wire, 5/32 in Wire, 36 ft Length, Steel Decorative circular shaped knob. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA  Grade 2 Security.
SPRING SNAP LINK SS 7/16      SPRING SNAP INTRLOCK SS 7/16  Kwikset Hancock 788H15BX Signature Dummy Door Knob
Baron Spring Snap, 320 lb, 5/8 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, Polished, For Marine, Industrial and Agricultural Use Baron Spring Snap, Interlocking, 1100 lb, 3/4 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, For Lifting, Pulling, Marine, Recreational Mooring and Other Farm Applications Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2.
Kwikset Hancock 788H11PBX Signature Dummy Door Knob Kwikset Hancock 788H5BX Signature Dummy Door Knob Schlage F170 Plymouth Decorative Round Dummy Door Knob
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. Used for door pull or as matching inactive trim for one side of door.
Schlage F170 Plymouth Decorative Round Dummy Door Knob Schlage F170 Orbit Ball Decorative Dummy Door Knob Schlage F170 Plymouth Decorative Round Dummy Door Knob
Used for door pull or as matching inactive trim for one side of door. Used for door pull or as matching inactive trim for one side of door. Used for door pull or as matching inactive trim for one side of door.
Schlage F170 Decorative Dummy Door Knob Schlage F170 Decorative Dummy Door Knob National Hardware 3166BC Interlocking Spring Snap
Used for door pull or as matching inactive trim for one side of door. Used for door pull or as matching inactive trim for one side of door. National Hardware Spring Snap, Interlocking, Series: 3166BC, 1100 lb Load Capacity, 3/4 in Snap Opening, 15/16 in Eye Width, 4-3/4 in Overall Length, Grade: 316, Stainless Steel, Zinc Plated, BHMA A138.18, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications
Schlage F170 Decorative Reversible Dummy Door Knob LOCK DEADBOLT SNGL CYL SAT NIC Mintcraft C3 Dummy Door Knob
Used for door pull or as matching inactive trim for one side of door. Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction.
KNOBSET DUMMY GRADE 2 S/S     Schlage F170 PlymouthRound Dummy Door Knob Schlage F170 Decorative Dummy Door Knob
KNOBSET DUMMY GRADE 2 S/S
Our Price: $16.54
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength, all metal construction. Used for door pull or as matching inactive trim for one side of door. Used for door pull or as matching inactive trim for one side of door.
KNOB DUMMY PLYMOUTH MATTE BLK LOCK DEADBOLT SNGL CYL AGEDBRZ DOOR KNOB DUMMY LAUREL 788L-15
Used for door pull or as matching inactive trim for one side of door. Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required; Kwikset levers are available in multiple styles and finishes; Lifetime mechanical and finish warranty.
DOOR KNOB DUMMY LAUREL788L-11P KNOB DUMMY GEORGIAN AGED BRZ  LOCK SNGL SIDE DEADBOLT 667-3
Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required; Kwikset levers are available in multiple styles and finishes; Lifetime mechanical and finish warranty. Used for door pull or as matching inactive trim for one side of door. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security.
LOCK SNGL SIDE DEADBOLT667-26D Kwikset 660 Signature Single Cylinder Light Duty Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt
Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Schlage F170 Siena Egg Decorative Dummy Door Knob Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 26D Signature Single Cylinder Dead Bolt
Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Kwikset 660 Signature Single Cylinder Dead Bolt LOCK D-CYL DEADBOLT 665-11P   Schlage F170 Siena Egg Decorative Dummy Door Knob
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and inside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield and pick resistant 5-pin system. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim.
DEADBOLT SS SGL CYL MOBILEHOME Kwikset 9803 Signature Single Cylinder Dead Bolt DEADBOLT SINGLE CYL SS KA3 BOX
Operated by key outside and turn piece inside. Adjustable backset. Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4".
DEADBOLT SINGLE CYL S/S KA3 VP DEADBOLT SINGLE CYL G2 DB2051 MBLE HME DEADBOLT SGL CYL PB
Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Grade 2 Single Cyl. Deadbolt - Standard duty commercial grade constructed with a tubular steel chassis, keyed with thumb turn interior, adjustable back set and featuring a Schlage 6-pin solid brass keyway with 2 nickel keys per lock; roller bar for added security against hacksaw and reciprocating saw attacks. ANSI compliant and rated for 150,000 cycles. Operated by key outside and turn piece inside. Adjustable backset.
DEADBOLT SINGLE CYL PB KA3 VP DEADBOLT SINGLE CYL PB KA3 BOX Kwikset 98015 Signature Single Cylinder Dead Bolt
Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
MBLE HME DEADBOLT DBLE CYL SS DEADBOLT DBL CYL SS KA3 BOX PK DEADBOLT DBL CYL PB KA3 BOX PK
Can be locked or unlocked by key on both sides. Adjustable latch. Locked or unlocked by key on both sides. Locked or unlocked by key on both sides.
DEADBOLT SINGLE CYL 6-WAY PB  MBLE HME DEADBOLT DBL CYL PB  Kwikset 980 Signature Single Cylinder Dead Bolt
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Can be locked or unlocked by key on both sides. Adjustable latch. Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DEADBOLT SNGL CYL 6-WAY ANTBRS DEADBOLT SINGLE CYL 6-WAY S/S AUSTIN SC DEADBOLT SAT NCKL CP
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Austin's rustic style brings a new level of charm and appeal to any space, whether in the city or country; for use on exterior doors where keyed entry and security is needed; featuring "SmartKey" Re-key technology; re-key the lock yourself in seconds in 3 easy steps; single cylinder deadbolt operates by key outside and thumbturn inside; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty.
AUSTIN SC DBOLT VBRONZE CP    Kwikset 7803 Signature Single Cylinder Dead Bolt DEADBOLT SINGLE CYL GRADE2 SAT
Austin's rustic style brings a new level of charm and appeal to any space, whether in the city or country; for use on exterior doors where keyed entry and security is needed; featuring "SmartKey" Re-key technology; re-key the lock yourself in seconds in 3 easy steps; single cylinder deadbolt operates by key outside and thumbturn inside; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
KNOBSET CLASSROOM GRADE 2 S/S DEADBOLT SNGL CYL 6-WAY SATIN DEADBOLT DBL CYLINDER S/S KA3
Lock or unlock by key outside, inside knob always free. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway for more security. Seamless one-piece knob for extra strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. U.L. Approved 3-Hour Fire Rating. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Locked or unlocked by key on both sides.
Kwikset 7805 Signature Single Cylinder Dead Bolt Kwikset 780 Signature Single Cylinder Dead Bolt Kwikset 780 Signature Single Cylinder Dead Bolt
Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Kwikset 780L Signature Single Cylinder Dead Bolt LOCK SNGL CYL DEADBOLT 780-11P LOCK SNGL CYL DEADBOLT 780-26D
Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by key outside and thumbturn inside. DOOR PREP: 2-1/8" or 1-1/2" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/8" to 1-3/4" standard. 1-7/8" to 2-1/4" optional. CYLINDER: 5 pin SmartKey cylinder. FACEPLATE: 1" x 2-1/4". STRIKE: 1-1/4" x 3-5/8". BOLT: 1" throw, stainless steel. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. ADA: Interior turn piece meets 4.13.9 ADA requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DEADBOLT DOUBLE CYL G2 DB2041 DEADBOLT DBL CYLINDER PB KA3  Kwikset 985 Signature Double Cylinder Dead Bolt
Grade 2 Double Cyl. Deadbolt - Standard duty commercial double cylinder features a tubular construction; complies with ANSI A156.5, Grade 2 (150,000 cycles). It has a 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 1-3/4"; has an adjustable backset. Locked or unlocked by key on both sides. Operated by key on both sides. Signature Series' deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. This design includes "BumpGuard" for improved security against lock bumping. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. ANSI/BHMA: Grade 1. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Kwikset 816 Signature Single Cylinder Dead Bolt Kwikset 816 Signature Double Cylinder Dead Bolt DEADBOLT SINGLE CYL MATTE BLK
Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA. Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA. For residential single and multi-family entrance doors. Deadbolt thrown or retracted by key outside, or by turn unit inside; bolt automatically deadlocks when fully thrown. 7/8" wrought brass trim ring reinforced with security inserts. Concealed spin ring rotates to protect against wrenching the cylinder. Solid steel door frame reinforcer with 3" screws protects against kick-in attack. Solid, 1 piece design protects against hammer and crowbar prying attacks. 2-1/2" steel adapter ring, plated to match, provided for accommodating 2-1/8" crossbore. Hands free installation. DOOR PREP: 1-1/2" or 2-1/8" crossbore; 7/8" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: solid brass, 5-pin, tumbler C keyway with nickel silver, pick resistant, spool pins and 2 nickel silver, 5-pin, C section keys. FACEPLATE: 1" x 2-1/4". STRIKES: 1-1/8" x 2-3/4", no lip, with dust box and door frame reinforcer. BOLT: 7/8" housing and 1" throw with concealed hardened steel roller to prevent cutting or sawing. ANSI/BHMA: Exceeds A 156.5, 1992 Grade 2 with Grade 1 security features. DUAL OPTION UNIVERSAL: Fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
DEADBOLT DOUBLE CYL 6-WAY S/S Kwikset 816 Signature Double Cylinder Dead Bolt DEADBOLT DOUBLE CYL 6-WAY PB
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Key Control deadbolts features "SmartKey" re-key technology, either cylinder can be re-keyed in seconds, without removing the lock from the door. Top concealed cylinder provides one-key control for the property manager; lower exposed cylinder allows unique user keys for the tenant. Concealed key control cylinder has a unique patented keyway to provide increased security; rotate the cylinder cap to expose the cylinder for use. User cylinder utilizes the traditional Kwikset key way and keys, gear assembly enables both cylinders to lock or retract the deadbolt latch. This design includes 'BumpGuard" for improved security against lock bumping. DOOR PREP:  2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. DOOR THICKNESS:  1-3/4". CYLINDER:  2 SmartKey: 1 standard Kwikset for users, 1 unique patented keyway for 1-Key Control. FACEPLATE:  1" x 2-1/4". STRIKE:  1-1/4" x 3-5/8". BOLT:  1" throw. ANSI/BHMA:  Grade 2. ADA:  Interior turn piece meets 4.13.9 ADA. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
DEADBOLT DBL CYL 6-WAY ANT BRS DEADBOLT DBL CYL GRADE 2 SATIN Kwikset 785 Signature Double Cylinder Dead Bolt
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THI