Home > HARDWARE > LOCKSETS & KEYING SUPPLIES > CLASSROOM LOCKSETS > CLASSROOM LOCKS - LEVER
Sort By:
1
National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link Campbell T5950124 Repair Lap Link
LAP LINKS 1/8IN ZN PLT
Our Price: $0.73
LAP LINKS 3/16IN ZN PLT
Our Price: $0.76
National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link Campbell T5950724 Repair Lap Link
LAP LINKS 1/4IN ZN PLT
Our Price: $1.03
LAP LINKS 5/16IN ZN PLT
Our Price: $1.76
National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Lap Link, Series: 3152BC, 5/16 in, Steel, Zinc Plated, 725 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
National Hardware 3152BC Lap Link Campbell T9001424 Eye Grab Hook Campbell T5950924 Repair Lap Link
LAP LINKS 3/8IN ZN PLT
Our Price: $2.09
National Hardware Lap Link, Series: 3152BC, 3/8 in, Steel, Zinc Plated, 1450 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Cambell T9501424 Clevis Grab Hook LINK LAP ZINC PLATED 1/2IN    Campbell T9100424 Eye Slip Hook
LAP LINKS 1/2IN ZN PLT
Our Price: $2.82
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Designed for joining two lengths of chain together or accessories to a chain. Link can be closed with a hammer or vise. Links must be completely closed to perform at rated capacity. Manufactured from steel. Warning: Do not exceed the working load limits for  chain or components. Do not use for overhead lifting or hoisting.
Koch 086211 Eye Grab Hook Campbell T9001524 Eye Grab Hook National Hardware 3244BC Removable Eye Grab Hook
CHAIN HOOK 1/4IN BLUE
Our Price: $3.27
Drop forged construction, zinc plated. Used to easily join attachments to welded chain or wire rope. Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. National Hardware Eye Grab Hook, Removable, Series: 3244BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, For Industrial and Construction Applications
HOOK EYE GRB BLU STL 1/4IN    HOOK EYE GRB BLU STL 5/16IN   Campbell T9101524 Eye Slip Hook
CHAIN HOOK 5/16IN BLUE
Our Price: $3.95
Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Warning: Do not exceed the working load limits for  chain or components. Do not use for overhead lifting or hoisting.
Cambell T9501524 Clevis Grab Hook Baron 660-1/2 Lap Link Cambell T9401424 Clevis Slip Hook
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Used to connect two pieces of chain - or chain to eyelet, snap, ring, etc. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell T9001624 Eye Grab Hook National Hardware 3246BC Eye Slip Hook National Hardware 3240BC Removable Clevis Grab Hook
CHAIN HOOK 5/16IN BLUE
Our Price: $4.63
CHAIN HOOK 1/4IN BLUE
Our Price: $4.84
Drop forged carbon steel. Designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. National Hardware Eye Slip Hook, Series: 3246BC, 5/16 in Opening, 3900 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, For Industrial and Construction Applications
Campbell T9700424 Clevis Slip Hook with Latch Cambell T9401524 Clevis Slip Hook National Hardware 3244BC Removable Eye Grab Hook
CHAIN HOOK 3/8IN BLUE
Our Price: $5.36
Zinc finish. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. National Hardware Eye Grab Hook, Removable, Series: 3244BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, For Industrial and Construction Applications
Cambell T9501624 Clevis Grab Hook Baron C-330-1/4 Clevis Grab Hook Campbell T9503415 Clevis Grab Hook
DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Baron Clevis Grab Hook, 1/4 in Opening, 2600 lb, Forged Alloy Steel, Electro Galvanized DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
National Hardware 3242BC Clevis Slip Hook HOOK GRAB CLVS ZN PLT 5/16IN  Stanley 301572 Rectangular Metal Sheet
CHAIN HOOK 1/4IN BLUE
Our Price: $5.61
National Hardware Clevis Slip Hook, Series: 3242BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Used for auto repairs, duct work, flashing and gutter repairs.
Campbell T9700524 Clevis Slip Hook with Latch National Hardware 3240BC Removable Clevis Grab Hook HOOK CLVS GRB CHRMT/YEL 1/4IN
CHAIN HOOK 5/16IN BLUE
Our Price: $5.97
Zinc finish. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 5/16 in Opening, 3900 lb, Forged Steel, Blue, For Industrial and Construction Applications Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
Baron C-330-5/16 Clevis Grab Hook Campbell T9101624 Eye Slip Hook Campbell T5950024 Repair Lap Link
Baron Clevis Grab Hook, 5/16 in Opening, 3900 lb, Forged Alloy Steel, Electro Galvanized Drop forged carbon steel. Designed with a full wide throat to allow for fast and easy connections. Chain is passed through throat of slip hook to form a chain loop used to drag, pull or tow, the loop will tighten when slack in chain is taken up. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
National Hardware 3242BC Clevis Slip Hook National Hardware 3253BC Removable Clevis Grab Hook Campbell T9503515 Clevis Grab Hook
CHAIN HOOK 5/16IN BLUE
Our Price: $6.30
National Hardware Clevis Slip Hook, Series: 3242BC, 5/16 in Opening, 3900 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications National Hardware Clevis Grab Hook, Removable, Series: 3253BC, 5/16 in Opening, 4700 lb, Forged Steel, Chromate, Yellow, For Industrial and Construction Applications DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
National Hardware 3246BC Eye Slip Hook Campbell T9700624 Clevis Slip Hook with Latch Cambell T9401624 Clevis Slip Hook
CHAIN HOOK 3/8IN BLUE
Our Price: $6.67
National Hardware Eye Slip Hook, Series: 3246BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications Zinc finish. DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
K & S 7183 Metal Sheet HOOK CLVS GRB CHRMT/YEL 5/16IN Stanley 346809 Metal Sheet
K & S Metal Sheet, 0.018 in Thickness, 6 in Width, 12 in Length, Stainless Steel Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting. Use for auto repairs, duct work, flashing and gutter repairs.
Stanley 347161 Metal Sheet HOOK EYE GRB BLU STL 1/4IN    HOOK CLVS GRB CHRMT/YEL 3/8IN
Use for auto repairs, duct work, flashing and gutter repairs. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Latch keeps connection in place until purposefully removed. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
HOOK EYE GRB BLU STL 5/16IN   National Hardware 3240BC Removable Clevis Grab Hook National Hardware 3242BC Clevis Slip Hook
CHAIN HOOK 3/8IN BLUE
Our Price: $7.93
CHAIN HOOK 3/8IN BLUE
Our Price: $7.98
Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Latch keeps connection in place until purposefully removed. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting National Hardware Clevis Grab Hook, Removable, Series: 3240BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, For Industrial and Construction Applications National Hardware Clevis Slip Hook, Series: 3242BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications
National Hardware 3243BC Clevis Slip Hook With Latch K & S 7185 Metal Sheet Stanley 346981 Rectangular Metal Sheet
CHAIN HOOK 1/4IN BLUE
Our Price: $8.23
National Hardware Clevis Slip Hook, Series: 3243BC, 1/4 in Opening, 2600 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications K & S Metal Sheet, 0.025 in Thickness, 6 in Width, 12 in Length, Stainless Steel Used for auto repairs, duct work, flashing and gutter repairs.
Mintcraft L6 Dummy Door Lever Set LEVERSET L6 DUMMY RH POL BRASS HOOK CLVS GRB CHRMT/YEL 3/8IN
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
HOOK EYE SLP BLU STL 3/8IN    HOOK CLVS/LTCH CHRMT/YEL 1/4IN LEVERSET L6 DUMMY LH POL BRASS
Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Latch keeps connection in place until purposefully removed. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors.
HOOK CLVS GRB BLU STL 7/16IN  HOOK EYE GRB BLU STL 1/2IN    National Hardware 3243BC Clevis Slip Hook With Latch
CHAIN HOOK 7/16IN BLUE
Our Price: $9.05
CHAIN HOOK 1/2IN BLUE
Our Price: $9.06
CHAIN HOOK 5/16IN BLUE
Our Price: $9.14
Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. National Hardware Clevis Slip Hook, Series: 3243BC, 5/16 in Opening, 3900 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications
Stanley 346726 Rectangular Metal Sheet Stanley 215764 Rectangular Metal Sheet Baron C-330-3/8 Clevis Grab Hook
Used for auto repairs, duct work, flashing and gutter repairs. Used for auto repairs, duct work, flashing and gutter repairs. Baron Clevis Grab Hook, 3/8 in Opening, 5400 lb, Forged Alloy Steel, Electro Galvanized
Mintcraft L6 Dummy Door Lever Set Mintcraft L6 Dummy Door Lever Set LEVERSET L6 DUMMY RH SATIN NIC
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors.
LOCK SNGL DEADBOLT 663-3      LOCK SNGL DEADBOLT 663-26D    HOOK CLVS/LTCH CRMT/YEL 5/16IN
Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
LEVERSET L6 DUMMY LH SATIN NIC K & S 254 Metal Sheet Kwikset Dorian 488-CP Signature Half Inactive Dummy Door Lever
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece knob for extra strength constructed of die cast materials. HANDING: Must specify for right or left hand doors. K & S Metal Sheet, 0.008 in Thickness, 4 in Width, 10 in Length, Tin, For Hobby, Hardware, Craft, and Do-it-yourself Fields For use on doors where only a pull is required such as bi-fold and closet doors. No operation. HANDING: Non-handed. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. SGL Dummy Trim.
HOOK EYE GRB BLU STL 1/2IN    National Hardware 4075BC Expanded Mesh Mintcraft Lye Dummy Door Lever Set
Designed for making quick connections with chain in industrial and construction applications.. Meets Grade 43 hook specifications. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. National Hardware Expanded Mesh, Series: 4075BC, 12 X 12 in Mesh, 13 AWG Wire, Hot Rolled Steel, 3/4 in Grid, 0.09 in Thickness, For Machinery Guards, Screen Door Protectors and Ventilated Motor Housings Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors.
LEVERSET LYE DUMMY LH POL BRS LEVERSET LYE DUMMY RH POL BRS Campbell T5950324 Repair Lap Link
Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors. Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Kwikset Dorian 488-CP Signature Half Inactive Dummy Door Lever K & S 255 Metal Sheet Kwikset Balboa Signature 94880-496Dummy Door Lever
For use on doors where only a pull is required such as bi-fold and closet doors. No operation. HANDING: Non-handed. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. SGL Dummy Trim. K & S Metal Sheet, 0.016 in Thickness, 4 in Width, 10 in Length, Aluminum, For Hobby, Hardware, Craft, and Do-it-yourself Fields The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty.
Kwikset Balboa Signature 94880-495Dummy Door Lever HOOK CLVS GRB BLUE 1/2IN      National Hardware 3243BC Clevis Slip Hook With Latch
CHAIN HOOK 1/2IN BLUE
Our Price: $10.82
CHAIN HOOK 3/8IN BLUE
Our Price: $11.34
The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. National Hardware Clevis Grab Hook, Series: N177, 9200 lb Load Capacity, Forged Steel, Blue, Standards: Meets Grade 43, For Use With Chain Of An Equal or Lower Grade in Industrial and Construction Applications National Hardware Clevis Slip Hook, Series: 3243BC, 3/8 in Opening, 5400 lb, Forged Steel, Blue, Grade 43 Hook Specifications, For Making Quick Connections With Chain in Industrial and Construction Applications
DOOR LEVER DUMMY LH VBZ BALBOA DOOR LEVER DUMMY RH VBZ BALBOA Kwikset Balboa Signature 94880-492Dummy Door Lever
The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty.
Kwikset Balboa Signature 94880-491Dummy Door Lever DOOR LVR DUMMY RH 11P 488BL   HOOK CLVS/LTCH CHRMT/YEL 3/8IN
The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 70 hook specifications. Removable clevis is for easier rigging. For use with Grade 70 transport chain or with chain of a lower grade. Manufactured from forged steel. Not designed for over-head lifting.
Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever Kwikset Lido 788-CP Signature Half Inactive Dummy Door Lever
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements.
Kwikset Lido 788-CP Signature Half Inactive Dummy Door Lever DOOR LVR DUMMY LH11P 488BL    Cambell T9501824 Clevis Grab Hook
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. The Balboa lever?s wave style design is an attractive addition to any home. Installs in minutes with just a screwdriver. For use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. Designed to be used with Grade 43 or Grade 30 Chain. Heat treated pins. Hooks are heat treated and tempered. Hooks embossed with chain grade, fractional size, and country of origin. Hooks embossed with trace code providing traceability through manufacturing and testing process to heat of steel. Design ultimate strength equals 3 times working load limit, matching NACM specifications. Grab hooks are designed to grab a single link of chain on the side to form a loop for dragging, pulling or towing. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
LEVERSET LYE DUMMY LH SAT NIC LEVERSET LYE DUMMY RH AG BRONZ K & S 256 Metal Sheet
Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors. Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors. K & S Metal Sheet, 0.032 in Thickness, 4 in Width, 10 in Length, Aluminum, For Hobby, Hardware, Craft, and Do-it-yourself Fields
LEVERSET LYE DUMMY LH AG BRONZ DOOR LVR DUM DELTA 488DL-26D  LEVERSET LYE DUMMY RH SAT NIC
Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements. SGL Dummy Trim. Surface mounted for doors where only a pull is required; no operation. HANDING: Must specify for right or left handed doors.
Kwikset Lido 788-CP Signature Half Inactive Dummy Door Lever Kwikset Lido 788-CP Signature Half Inactive Dummy Door Lever Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements.
Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever Campbell T9101824/75591 Eye Slip Hook Kwikset Dorian 488 Signature Half Inactive Dummy Door Lever
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Drop forged carbon steel. Designed with a full wide throat to allow for fast and easy connections. Chain is passed through throat of slip hook to form a chain loop used to drag, pull or tow, the loop will tighten when slack in chain is taken up. WARNING: NOT TO BE USED FOR OVERHEAD LIFTING. DO NOT EXCEED WORK LOAD LIMIT. For use on doors where only a pull is required such as bi-fold and closet doors. No operation. HANDING: Non-handed. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. SGL Dummy Trim.
DOOR LVR DUM DORIAN 488DNL-11P HOOK CLVS SLP BLU STL 1/2IN   LEVER DUMMY RH SAT NIC LASALLE
For use on doors where only a pull is required such as bi-fold and closet doors. No operation. HANDING: Non-handed. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. SGL Dummy Trim. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
LEVER DUMMY RH SAT NIC SEVILLE LEVER DUMMY LH SAT NIC SEVILLE LEVER DUMMY LH SAT NIC LASALLE
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
LEVER DOOR DUMMY SATNIC TORINO Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever Kwikset Tustin 788-CP Signature Half Inactive Dummy Door Lever
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements.
LEVER DUMMY RH AGEDBRZ SEVILLE LEVER DUMMY LH AGEDBRZ SEVILLE LEVER DOOR DUMMY AGEDBRZTORINO
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
LEVER DUMMY RH AGEDBRZ LASALLE LEVER DUMMY LH AGEDBRZ LASALLE Schlage F170 LH Dummy Door Lever
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right.
Schlage F170 RH Accent Dummy Door Lever LOCK DEADBOLT SNGL CYL SAT NIC DOOR LVR DUM KNGSTN 788KNL-26D
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required; Kwikset levers are available in multiple styles and finishes; Lifetime mechanical and finish warranty.
Stanley N215756 Rectangular Metal Sheet Cambell T9401824 Clevis Slip Hook Stanley 301580 Rectangular Metal Sheet
Used for auto repairs, duct work, flashing and gutter repairs. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Used for auto repairs, duct work, flashing and gutter repairs.
LOCK DEADBOLT SNGL CYL AGEDBRZ Kwikset Tustin 788 Signature Half Inactive Dummy Door Lever Kwikset Tustin 788 Signature Half Inactive Dummy Door Lever
Easy installation; fits all standard door preparations; deadbolt thrown or retracted by key from outside or by inside turn unit; can be rekeyed to match existing locks or other locks purchased. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements.
Kwikset Tustin 788 Signature Half Inactive Dummy Door Lever Kwikset Tustin 788 Signature Half Inactive Dummy Door Lever DOOR LVR DUM RH LIDO 788LL-11P
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements.
DOOR LVR DUM LH LIDO 788LL-11P DOOR LVR DUM RH LIDO 788LL-15 DOOR LVR DUM LH LIDO 788LL-15
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA:  Grade 3. ADA: Satisfies section 4.13.9 requirements.
National Hardware 4209BC Plain Sheet Schlage F170 LH Dummy Door Lever Schlage F170 RH Accent Decorative Dummy Door Lever
National Hardware Plain Sheet, Series: 4209BC, 0.02 in Thickness, 24 in Width, 36 in Length, Aluminum, For Duct Work, Flashing, Gutters and Repair Projects Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right.
Schlage F170 LH Dummy Door Lever Schlage F170 RH Accent Decorative Dummy Door Lever Schlage F170 LH Flair Dummy Door Knob
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right.
Schlage F170 Flair Decorative Dummy Door Knob K & S 250 Metal Sheet Schlage F170 Flair Dummy Door Lever
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. K & S Metal Sheet, 0.005 in Thickness, 4 in Width, 10 in Length, Brass, For Hobby, Hardware, Craft, and Do-it-yourself Fields Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right.
Schlage F170 Flair Dummy Door Lever Schlage F170 Accent Dummy Door Lever Schlage F170 Accent Dummy Door Lever
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right.
Schlage F170 Elan Decorative Dummy Door Lever Kwikset CommonWealth 788 Signature Dummy Door Lever Kwikset CommonWealth 788 Signature Dummy Door Lever
Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 requirements.
DOOR LEVER DUMMY LH 788CHL-11P DOOR LEVER DUMMY RH 788CHL-11P HOOK CLVS SLP BLU STL 1/2IN
Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 requirements. Surface mounted for doors where only a pull is required. No operation. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 requirements. Designed for making quick connections with chain in industrial and construction applications. Meets Grade 43 hook specifications. Removable clevis is for easier rigging. Manufactured from forged steel. For use with chain of an equal or lower grade. Not designed for over-head lifting.
LOCK SNGL SIDE DEADBOLT 667-3 LOCK SNGL SIDE DEADBOLT667-26D National Hardware 4210BC Decorative Union Jack
Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. Features adjustable latch & deadbolt to fit all standard door preparations; ANSI/BHMA Grade 3 security; add to a keyed knob or lever for additional security. National Hardware Union Jack, Decorative, Series: 4210BC, 0.02 in Thickness, 24 in Width, 36 in Length, Aluminum, For Decorative Use With Doors, Windows, Cabinets and Lighting or Home Projects
Kwikset Austin Signature 97880-860 Rustic Dummy Door Lever Kwikset 660 Signature Single Cylinder Light Duty Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt
For use on interior doors where only a push/pull function is required. Installs in minutes with just a screwdriver. Kwikset levers are available in multiple styles and finishes. Lifetime mechanical and finish warranty. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Stanley 341479 Rectangular Metal Sheet Stanley 316273 Rectangular Metal Sheet Stanley 341487 Rectangular Metal Sheet
Used for auto repairs, duct work, flashing and gutter repairs. Used for auto repairs, duct work, flashing and gutter repairs. Used for auto repairs, duct work, flashing and gutter repairs.
Schlage F170 LH Dummy Door Lever Schlage F170 RH Accent Decorative Dummy Door Lever Schlage F170 LH Dummy Door Lever
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right.
Schlage F170 RH Accent Dummy Door Lever LEVER DUMMY ACCENT LH MAT BLK LEVER DUMMY ACCENT RH MAT BLK
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right.
Schlage F170 LH Flair Decorative Dummy Door Knob Schlage F170 RH Flair Decorative Wave Dummy Door Knob LEVER DUMMY FLAIR LH SAT NIC
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right.
LEVER DUMMY FLAIR RH SAT NIC  LEVER DUMMY FLAIR LH AGED BRZ LEVER DUMMY FLAIR RH AGED BRZ
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specified left or right.
LEVER DUMMY ACCENT LH AGED BRZ LEVER DUMMY ACCENT RH AGED BRZ Kwikset Austin Signature 97880-858 Rustic Dummy Door Lever
Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. Single trim for one side of residential single and multi-family doors; used as a pull or as matching inactive trim. Zinc based and plated, solid lever designing. HANDING: Specify handing, left or right. For use on interior doors where only a push/pull function is required. Installs in minutes with just a screwdriver. Kwikset levers are available in multiple styles and finishes. Lifetime mechanical and finish warranty.
Kwikset Austin Signature 97880-857 Rustic Dummy Door Lever Kwikset Austin Signature 97880-859 Rustic Dummy Door Lever DOOR LVR HALF DUMMY 788ADL-11P
For use on interior doors where only a push/pull function is required. Installs in minutes with just a screwdriver. Kwikset levers are available in multiple styles and finishes. Lifetime mechanical and finish warranty. For use on interior doors where only a push/pull function is required. Installs in minutes with just a screwdriver. Kwikset levers are available in multiple styles and finishes. Lifetime mechanical and finish warranty. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required; Kwikset levers are available in multiple styles and finishes; Lifetime mechanical and finish warranty.
DOOR LVR HALF DUMMY 788ADL-15 DOOR LEVER DUMMY LH 788PML-15 DOOR LEVER DUMMY RH 788PML-15
Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required; Kwikset levers are available in multiple styles and finishes; Lifetime mechanical and finish warranty. The Pembroke delivers style evoking a sense of antiquity. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. The Pembroke delivers style evoking a sense of antiquity. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty.
DOOR LEVER DUMMY LH 788PML-11P DOOR LEVER DUMMY RH 788PML-11P Stanley 316281 Rectangular Metal Sheet
The Pembroke delivers style evoking a sense of antiquity. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. The Pembroke delivers style evoking a sense of antiquity. Installs in minutes with just a screwdriver; for use on interior doors where only a push/pull function is required. Lifetime mechanical and finish warranty. Used for auto repairs, duct work, flashing and gutter repairs.
Stanley 316307 Rectangular Metal Sheet K & S 259 Metal Sheet Schlage FA170 LH Merano Flat Dummy Door Lever
Use for auto repairs, duct work, flashing and gutter repairs. K & S Metal Sheet, 0.025 in Thickness, 4 in Width, 10 in Length, Copper, For Hobby, Hardware, Craft, and Do-it-yourself Fields Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim; wrought brass interior trim. HANDING: Specified left or right.
Schlage FA170 RH Merano Flat Dummy Door Lever K & S 257 Metal Sheet K & S 251 Metal Sheet
Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim; wrought brass interior trim. HANDING: Specified left or right. K & S Metal Sheet, 0.064 in Thickness, 4 in Width, 10 in Length, Aluminum, For Hobby, Hardware, Craft, and Do-it-yourself Fields K & S Metal Sheet, 0.01 in Thickness, 4 in Width, 10 in Length, Brass, For Hobby, Hardware, Craft, and Do-it-yourself Fields
Kwikset 660 Signature Single Cylinder Dead Bolt Kwikset 660 26D Signature Single Cylinder Dead Bolt Kwikset 660 Signature Single Cylinder Dead Bolt
Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Operated by thumbturn inside, key outside. Security deadbolts feature full 1" solid core throwbolt, all metal mechanisms, anti-pry shield. DOOR PREP: 2-1/8" Crossbore; 1" Edge Bore; 1" x 2-1/4" Latch Face. BACKSET: adjustable 2-3/8" to 2-3/4". DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1" x 2-1/4" round corner. BOLT: 1" throw. HANDING: Reversible for right or left handed doors. ANSI/BHMA: Grade 3. "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
Stanley 341545 Expanded Metal Sheet Stanley 347120 Metal Sheet Stanley 341461 Rectangular Metal Sheet
Used for barbecue grills, chimney and security screens, pet cages. Use for auto repairs, duct work, flashing and gutter repairs. Used for auto repairs, duct work, flashing and gutter repairs.
Schlage F170 Avanti Decorative Dummy Door Lever Schlage F170 Avanti Decorative Dummy Door Lever Stanley 346999 Tread Plate
Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim. Single trim for one side of residential single and multi-family doors. Use as a pull or as matching inactive trim. 14 gauge
K & S 253 Metal Sheet Stanley 301606 Expandable Grill K & S 258 Metal Sheet
K & S Metal Sheet, 0.032 in Thickness, 4 in Width, 10 in Length, Brass, For Hobby, Hardware, Craft, and Do-it-yourself Fields Used for barbecue grills, chimney and security screens, pet cages. Contains 1 each: .001, .002, .003 (3" x 6" ) and one: .005 ( 4" x 4")
Stanley 316315 Rectangular Metal Sheet Stanley 301556 Rectangular Metal Sheet Mintcraft Y3 Dummy Door Lever
Use for auto repairs, duct work, flashing and gutter repairs. Used for auto repairs, duct work, flashing and gutter repairs. Surface mounted for doors where only a pull is required; no operation. Seamless one-piece lever for extra strength, all metal construction. HANDING: Reversible for right or left hand doors.
LEVER DUMMY GRADE 2 S/S ZINC  Kwikset 9803 Signature Single Cylinder Dead Bolt Stanley 316299 Rectangular Metal Sheet
Surface mounted for doors where only a pull is required; no operation. Seamless one-piece lever for extra strength, all metal construction. HANDING: Reversible for right or left hand doors. Operated by key outside and thumbturn inside. Signature Series deadbolts feature titanium alloy throwbolt core and ultra-strike for jamb brace. DOOR PREP: 2-1/8" or 1-1/2" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: 1-3/4". Includes 3 anti-pick top pins. FACEPLATES: 1" x 2-1/4" round corner. STRIKES: 1-1/8" x 2-3/4" round corner. Includes ultra-strike door jamb brace with (3) 3" screws. BOLT: Brass bolt, full 1" throw. Titanium alloy throwbolt core. HANDING: Reversible for right or left hand doors. ANSI/BHMA: A156.5 Grade 1. ADA: Satisfies section ADA 4.13.9 requirements. Deadbolts with "SmartKey" (denoted SMT) feature allow, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Used for auto repairs, duct work, flashing and gutter repairs.
DEADBOLT SS SGL CYL MOBILEHOME DEADBOLT SINGLE CYL SS KA3 BOX Stanley 316323 Rectangular Metal Sheet