|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clamshell.
|
Weldless, low carbon steel. Clamshell.
|
Low carbon steel welded chain with longer links than machine chain. Clamshell.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweght steel decorative chain for light duty applications. Clamshell,.
|
Lightweght steel decorative chain for light duty applications. Clamshell,.
|
For hall and closet doors, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. All metal components, constructed of die cast materials. Solid steel latch assembly. 6-way adjustable latch fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. Reversible handing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closet doors, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. All metal components, constructed of die cast materials. Solid steel latch assembly. 6-way adjustable latch fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. Reversible handing.
|
For hall and closet doors, or all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. Reversible handing. Adjustable 6-way latch and radius round corner strike.
|
For hall and closet, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closet, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements.
|
For hall and closet doors, or all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. Reversible handing. Adjustable 6-way latch and radius round corner strike.
|
The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3. Non-handed lever design to fit both right and left handed doors. Lifetime mechanical and finish warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For hall and closet, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closet, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements.
|
For hall and closet, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 requirements.
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3. Non-handed lever design to fit both right and left handed doors. Lifetime mechanical and finish warranty.
|
The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3. Non-handed lever design to fit both right and left handed doors. Lifetime mechanical and finish warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3. Non-handed lever design to fit both right and left handed doors. Lifetime mechanical and finish warranty.
|
For hall and closet doors, or all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. Reversible handing. Adjustable 6-way latch and radius round corner strike.
|
For hall and closets. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 ADA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levels always free; no locking mechanism. DOOR PREP: 2-1/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
Easy installation; fits all standard door preparations; hall and closet function; both knobs always unlocked.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For hall and closets. Both levers always free; no locking mechanism. For hall and closet doors. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". 2-1/4" doors optional. FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For hall and closets. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 ADA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levels always free; no locking mechanism. DOOR PREP: 2-1/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both levers always unlocked. Zinc based and plated, elegant, solid lever designing. 3 piece assembly for easy installation. Triple Option Universal, fits all doors, 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. ADA compliant; meets ANSI Grade 2 requirements. HANDING: Non-handed.
|
For hall and closets. Both levels always free; no locking mechanism. DOOR PREP: 2-1/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For hall/closet doors, professional needs where specific codes must be met. Both knobs always unlocked. Constructed of plated, pressure cast zinc. Wrought brass exposed trim and all metal parts. 3 piece assembly for easy installation. ADA compliant; meets ANSI Grade 2 requirements. U.L. Listed for up to 3 hour fire doors. HANDING: Non-handed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
For hall and closets. Both levels always free; no locking mechanism. DOOR PREP: 2-1/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
For hall and closets. Both levels always free; no locking mechanism. DOOR PREP: 2-1/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 2. ADA: Satisfies section 4.13.9 ADA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both levers are always unlocked; supplied with Dual Option Spring Latch which consists of a radius round corner faceplate and a drive-in faceplate. Unit is non handed and is field reversible. DOOR THICKNESS: 1-3/8" to 1-3/4". CROSS BORE: 2-1/8". EDGE BORE: 1", 7/8". BACKSET: Adjustable 2-3/8" or 2-3/4". Grade 2 ANSI/BHMA certified.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For hall and closets. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 ADA requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closets. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Grade 3. ADA: Satisfies section 4.13.9 ADA requirements.
|
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty.
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both levers are always unlocked. DOOR THICKNESS: 1-3/8" to 1-3/4". LATCH: 1" x 2-14", radius corner faceplate, 7/8" housing diameter, 1/2" throw, with Triple-Option square corner and circular corner faceplate. STRIKES: Dual strikes 1-5/8" x 2-1/4", radius corner and square corner, full lip, no box. BACKSET: Dual backset latches, fits either 2-3/8" or 2-3/4" backsets.
|
For use on interior doors requiring no locking functionality, such as hallway or closet doors. Fully reversible lever; fits both right handed and left handed doors. ANSI/BHMA Grade 2 Security. Fits door thickness of 1-3/8" to 1-3/4". Features adjustable latch to fit all standard door preparations. Easily installs in minutes with just a screwdriver. Lifetime mechanical and finish warranty.
|
For use on interior doors requiring no locking functionality, such as hallway or closet doors. Fully reversible lever; fits both right handed and left handed doors. ANSI/BHMA Grade 2 Security. Fits door thickness of 1-3/8" to 1-3/4". Features adjustable latch to fit all standard door preparations. Easily installs in minutes with just a screwdriver. Lifetime mechanical and finish warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closet, and all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/8" to 1-3/4" FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Reversible for right or left hand doors. (Interior) ADA: Satisfies section 4.13.9 requirements. ANSI/BHMA: Grade 2.
|
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty.
|
For hall and closet, and all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/8" to 1-3/4" FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Reversible for right or left hand doors. (Interior) ADA: Satisfies section 4.13.9 requirements. ANSI/BHMA: Grade 2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hall and closet, and all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/8" to 1-3/4" FACEPLATE: 1" x 2-1/4". STRIKE: 2-1/4" full lip. BOLT: 1/2" throw. HANDING: Reversible for right or left hand doors. (Interior) ADA: Satisfies section 4.13.9 requirements. ANSI/BHMA: Grade 2.
|
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; fully reversible lever - fits both right handed and left handed doors; Lifetime mechanical and finish warranty; featuring "SmartKey" Re-key Technology. The lock you can re-key yourself in seconds; SmartKey cylinders feature a stainless steel side locking bar, racks and pins for increased strength and securoty; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks.
|
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; fully reversible lever - fits both right handed and left handed doors; Lifetime mechanical and finish warranty; featuring "SmartKey" Re-key Technology. The lock you can re-key yourself in seconds; SmartKey cylinders feature a stainless steel side locking bar, racks and pins for increased strength and securoty; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; Lifetime mechanical and finish warranty.
|
The Pembroke delivers style evoking a sense of antiquity. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 2 security. Fully reversible lever - fits both right handed and left handed doors. Lifetime mechanical and finish warranty.
|
The Pembroke delivers style evoking a sense of antiquity. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 2 security. Fully reversible lever - fits both right handed and left handed doors. Lifetime mechanical and finish warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Non-locking, ideal for closets and rooms where locking is not needed; easy 3-step installation, only a screwdriver needed; quality materials and construction for exceptional security; lifetime finish and mechanical guarantee; quality finishes coordinate with plumbing and lighting.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
Non-locking, ideal for closets and rooms where locking is not needed; easy 3-step installation, only a screwdriver needed; quality materials and construction for exceptional security; lifetime finish and mechanical guarantee; quality finishes coordinate with plumbing and lighting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lock or unlock by key outside, inside knob always free. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway for more security. Seamless one-piece knob for extra strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Grade 2. U.L. Approved 3-Hour Fire Rating.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
|
Complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latch bolt operated by lever from either side.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For residential single and multi-family hall/closet doors. Both knobs always unlocked. Zinc based and plated, solid lever designing. 3 piece assembly. Triple Option Universal fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. All latchsets have the same finish for both interior and exterior parts.
|
For residential single and multi-family hall/closet doors. Both levers are always unlocked. DOOR THICKNESS: 1-3/8" to 1-3/4". LATCH: 1" x 2-14", radius corner faceplate, 7/8" housing diameter, 1/2" throw, with Triple-Option square corner and circular corner faceplate. STRIKES: Dual strikes 1-5/8" x 2-1/4", radius corner and square corner, full lip, no box. BACKSET: Dual backset latches, fits either 2-3/8" or 2-3/4" backsets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty commercial storeroom lever; complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Keying: 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latchbolt operated by rotating inside lever or key in outside lever. Outside lever always fixed.
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
Outside lever always locked, inside lever always free; key outside retracts latch. All metal components. Solid steel deadlocking latch assembly. Rust resistant solid brass keyway for more security. Seamless one-piece lever for extra strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage. With 2 nickel plated, solid brass keys. FACEPLATES: Adjustable for flat or beveled doors. STRIKES: 1-1/8" x 2-3/4" square corner T-strike. BOLT: Steel 1/2" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to provide reliable service in commercial environments such as multi-family and light commercial projects where basic needs or specific codes are required. Unlocked or locked by keyed lever outside. Emergency exit feature, no unlocking required for panic exit, inside knob always unlocked. All locksets have the same finish for both interior and exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4" t-strike, full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: A 156.2 Grade 2 requirements.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For hall and closet doors, all interior doors where a simple latch is all that is required. Both levers always free; no locking mechanism. All metal components. Solid steel latch assembly. Seamless one-piece lever for extra strength. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latch bolt operated by lever from either side.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Heavy-duty commercial storeroom lever; complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles), UL listed for 3 hour fire door, ANSI A117.1 American Disabilities Act (ADA). Keying: 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4") standard. Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latchbolt operated by rotating inside lever or key in outside lever. Outside lever always fixed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for fixture and novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for fixture and novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Used for decorative and hobby/craft applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for fixture and novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For general utility, farm and animal uses. Proof-tested. Refillable reels sized to fit Campbell merchandisers. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
A mild steel chain, zinc plated. Designed primarily for use with windlass and bucket to raise water from wells or cisterns.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for fixture and novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for fixture and novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.
|
For fixture/novelty suspension, general utility use not requiring high strength. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Campbell Straight Link Chain, NO 4 Chain, 100 ft Length, 215 lb Load Capacity, 0.12 in Material Diameter, 0.55 in Inner Length, 0.21 in Inner Width, Carbon Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Campbell Straight Link Machine Chain, NO 2 Chain, 125 ft Length, 325 lb Load Capacity, 0.15 in Material Diameter, 0.61 in Inner Length, 0.26 in Inner Width, Low Carbon Steel, Zinc Plated
|
For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
|
|
|
