Home > HARDWARE > LOCKSETS & KEYING SUPPLIES
Choose a sub category:
ENTRY LOCKSETS FASTENER ASSORTMENTS DECK FASTENERS
PRIVACY LOCKSETS PASSAGE LOCKSETS STOREROOM LOCKSETS
CLASSROOM LOCKSETS DUMMY DOOR HANDLES DOOR LOCK DEADBOLTS
COMBINATION LOCKSETS HANDLESET DOOR LOCKS LOCKSETS-MISC
LOCK PARTS / ACCESSORIES KEY BLANKS / ACCESSORIES
Sort By:
1
Western States 77989 Masonry Tapping Screw Western States 77988 Masonry Tapping Screw Western States 7799-5 Masonry Tapping Screw
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
Western States 77994 Masonry Tapping Screw Cobra 243S Double Expansion Short Lag Shield Cobra 211S Lead Anchor
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Corrosion resistant. It is internally threaded and it installs flush to surface.
Cobra 215S Lead Anchor Parasleeve 448N Sleeve Anchor Western States 77990 Masonry Tapping Screw
Corrosion resistant. It is internally threaded and it installs flush to surface. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
Camo 345099 Driver Bit Western States 77991 Masonry Tapping Screw CobraTap 620W Concrete Screw
3" Camo driver bit for use installing non-grooved deck board products. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
CobraTap 630W Concrete Screw CobraTap 621W Concrete Screw Western States 77996 Masonry Tapping Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
Western States 77997 Masonry Tapping Screw CobraTap 631W Concrete Screw CobraTap 622W Concrete Screw
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
CobraTap 632W Concrete Screw CobraTap 623W Concrete Screw CobraTap 633W Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
CobraTap 624W Concrete Screw Cobra 384V Drive Nail-In Anchor CobraTap 626W Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible.
CobraTap 634W Concrete Screw CobraTap 620J Concrete Screw CobraTap 621J Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
Parawedge 502G Wedge Anchor CobraTap 623J Concrete Screw Parawedge 504G Wedge Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Parawedge 503N Wedge Anchor CobraTap 631J Concrete Screw Cobra 385V Drive Nail-In Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
CobraTap 636W Concrete Screw CobraTap 632J Concrete Screw Cobra 381V Drive Nail-In Anchor
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Power Con 54105-1 Masonry Tapping Screw Power Con 54113-1 Masonry Tapping Screw Power Con 54085 Masonry Tapping Screw
Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue.
Power Con 54087 Masonry Tapping Screw Power Con 54103-1 Masonry Tapping Screw Cobra 386V Drive Nail-In Anchor
Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
CobraTap 622J Concrete Screw Power Con 54115-1 Masonry Tapping Screw Cobra 383V Drive Nail-In Anchor
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
CobraTap 624J Concrete Screw Power Con 54089 Masonry Tapping Screw Parawedge 491R Wedge Anchor
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
CobraTap 633J Concrete Screw Power Con 54121-1 Masonry Tapping Screw ANCHOR WEDGE 1/4X2-1/4IN 25PK
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Protec-Kote SDK-C262W-100 Weather Resistant Deck Screw 2-5/8 in Red Head 50126 Drop-In Anchor CobraTap 634J Concrete Screw
Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
Tapcon 24350 Concrete Screw Red Head 11019 Wedge Anchor Tapcon 24355 Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
CobraTap 636J Concrete Screw Red Head 50125 Drop-In Anchor CobraTap 620T Concrete Screw
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
CobraTap 630T Concrete Screw Parasleeve 447M Sleeve Anchor Tapcon 24360 Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
CobraTap 622T Concrete Screw CobraTap 623T Concrete Screw Deck Jig KJD/DECKBIT Drill Bit Set
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Designed for drilling concealed holes with the Kreg Deck Jig. Creates an unobtrusive hole on the edge of deck boards. Comes with an allen wrench and a rugged depth collar which controls the depth when drilling.
CobraTap 631T Concrete Screw Red Head 35303 Hammer Set Anchor Red Head 35305 Hammer Set Anchor
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes.
CobraTap 621T Concrete Screw ANCHOR WEDGE 5/8IN X 5IN 10PK Tapcon 24365 Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Tapcon 24375 Concrete Screw CobraTap 624T Concrete Screw Red Head 02041 Wedge Anchor
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
CobraTap 633T Concrete Screw EDGE TOOL HIDDEN FSTNR MRKSMN ANCHOR CNCRT PFH 3/16 X1-1/4IN
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Designed for installing treated lumber with Camo hidden fasteners only. Heavy duty, contractor-grade. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
Tapcon 24380 Concrete Screw CobraTap 626T Concrete Screw Red Head 11272 Wedge Anchor
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
CobraTap 632T Concrete Screw ANCHOR CNCRT PFH 3/16 X1-3/4IN Red Head 11273 Wedge Anchor
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Red Head 02014 Wedge Anchor Tapcon 24385 Concrete Screw LEVER DOOR ENTRY SATNICLASALLE
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased.
LEVER DOOR ENTRY SATNIC TORINO LEVER DOOR ENTRY SATNICSEVILLE SCREW CALIBURN 25PK 19/64X2-3/
Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased. Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
LEVER DOOR ENTRY AGBRZ TORINO LEVER DOOR ENTRY AGBRZ SEVILLE LEVER DOOR ENTRY AGBRZ LASALLE
Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased. Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased. Easy installation; fits all standard door preparations; keyed entry function; turn button locking, can be unlocked by key outside or by turn button inside; can be rekeyed to match existing locks or other locks purchased.
Tapcon 24395 Concrete Screw Red Head 11270 Wedge Anchor ANCHOR WEDGE 3/4X5-1/2IN 10PK
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Red Head 11021 Wedge Anchor DOOR LVR ENT DELTA 405DL-26D  ANCHOR WEDGE 5/8IN X 7IN 10PK
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Maximum Security locksets feature 2x strength full 1" throwbolt maximum security strike, and free-spinning guard. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Midwest 04133 Wedge Anchor ANCHOR CNCRT PFH 3/16 X2-1/4IN SCREW CALIBURN 50PK 1/4X1-3/4I
Midwest Wedge Anchor, Heavy Duty, 5/8 in Anchor, 3-1/2 in Anchor, Zinc Plated Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
SCREW CALIBURN 50PK 1/4X1-3/4I SCREW CALIBURN 25PK 19/64X3-1/ Kwikset Dorain 405 Entry Lever Lock
For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3.
ANCHOR CNCRT PFH 1/4 X 2-3/4IN ANCHOR CNCRT PFH 3/16 X2-3/4IN SCREW CALIBURN 50PK 1/4X2-1/4I
Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
SCREW CONCRETE 1/4X2-1/4IN    CobraTap 634T Concrete Screw DOOR LVR ENT BALBOA 405BL-11P
For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3 Security. Non-handed lever design to fit both right and left handed doors.  Lifetime mechanical and finish warranty.
DOOR LVR ENT DORIAN 405DNL-11P SCREW CONCRETE 1/4X2-3/4IN    Midwest 04136 Wedge Anchor
For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. Midwest Wedge Anchor, Heavy Duty, 5/8 in Anchor, 6 in Anchor, Zinc Plated
SCREW CALIBURN 25PK 19/64X5IN Kwikset Lido 740 Signature Entry Lever Lock Kwikset Tustin 740 Signature Entry Lever Lock
For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For keyed exterior doors. Both sides lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
SCREW CONCRETE 1/4X3-1/2IN    Kwikset Tustin 740-CAL Signature Entry Lever Lock Kwikset Tustin 740-R Signature Entry Lever Lock
For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DOOR LVR ENTRY LIDO 740LL-11P DOOR LVR ENT RCALRCS740LL-15K4 Midwest 04175 Short Lag Shield
For keyed exterior doors. Both sides lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For keyed exterior doors. Both sides lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Midwest Lag Shield, Short, 1/4 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete
Midwest 04140 Wedge Anchor Midwest 04178 Short Lag Shield ENTRANCE LEVER CTLG2 ADJUST BS
Midwest Wedge Anchor, Heavy Duty, 3/4 in Anchor, 4-1/4 in Anchor, Zinc Plated Midwest Lag Shield, Short, 1/2 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete Complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles) lever, UL listed for 3 hour fire door. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4"). Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latch bolt is operated by a lever from either side: outside lever is locked by turn button from inside; it is unlocked by a key from outside or rotating inside lever. There is a 6 pin SCC keyway with 2 nickel keys per lock.
Midwest 04185 Long Lag Shield Midwest 04127 Wedge Anchor Midwest 04176 Short Lag Shield
Midwest Lag Shield, Long, 1/4 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 2-3/4 in Anchor, Zinc Plated Midwest Lag Shield, Short, 5/16 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete
Midwest 04128 Wedge Anchor Camo Marksman Pro 0345001 Deck Fastening System Camo Marksman Pro-NB 0345015 Deck Fastening System
Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 3-3/4 in Anchor, Zinc Plated The Camo Marksman Pro is a heavy duty contractor grade tool. The Marksman Pro positions Camo deck screws to penetrate the deckboard. This tool easily adjusts to fit 5-1/4" - 5-3/4" deckboards, and clamps securely to the deckboard.  Provides automatic 3/16" spacing between boards, and has dual screw guides that enable both sides of the board to be fastened to the joist with single tool placement. Heavy duty contractor grade tool. The Marksman ProNB positions CAMO deck screws to penetrate the deckboard. Easily adjusts to fit 3 1/4" - 5" deckboards, and clamps securely to the deckboard. Provides automatic 3/16" spacing between boards, and has dual screw guides that enable both sides of the board to be fastened to the joist with single tool placement.
DECK TOOL HIDDEN FASTNR PRO-X1 Kwikset Lido 740 Signature Entry Lever Lock Kwikset Tustin 740 Signature Entry Lever Lock
Marksman Pro is designed for multiple deck applications. For installation of treated lumber decks. The Pro-X1 is designed with a 1/16" spacer to allow the smallest of gaps between deck boards. Ideal for installation of wet treated deck boards that will shrink as they dry naturally. For keyed exterior doors. Both sides lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: adjustable to 2-3/8" or 2-3/4". DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed.
DOOR LVRENT KINGSTON 756KNL26D Midwest 04186 Long Lag Shield Schlage F51 Accent Entry Lever Lock
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; fully reversible lever - fits both right handed and left handed doors; Lifetime mechanical and finish warranty; featuring "SmartKey" Re-key Technology. The lock you can re-key yourself in seconds; SmartKey cylinders feature a stainless steel side locking bar, racks and pins for increased strength and securoty; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Midwest Lag Shield, Long, 5/16 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps.
Schlage F51 Flair Entry Lever Lockset Kwikset Tustin 740-CP Signature Entry Lever Lock Midwest 04124 Wedge Anchor
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turnbutton lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4", full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. ANSI/BHMA:  Grade 2. Locksets with "SmartKey" (denoted SMT) feature allows, in 3 steps, locks to be re-keyed to a spare set of keys. When the spare keys are done being used, the lock can be re-keyed back to the original set of keys; can continually be re-keyed. Midwest Wedge Anchor, Heavy Duty, 3/8 in Anchor, 2-3/4 in Anchor, Zinc Plated
LEVER ENTRY FLAIR KYD SAT NIC Kwikset Austin Signature 97402-712 Rustic Entry Lever Lockset Kwikset Austin Signature 97402-711 Rustic Entry Lever Lockset
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turnbutton lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4", full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For use on exterior doors where keyed entry and security is needed; fully reversible lever; fits both right handed and left handed doors; ANSI/BHMA Grade 2 security; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations; featuring SmartKey re-key technology; re-key the lock yourself in seconds in 3 easy steps. Lifetime mechanical and finish warranty. For use on exterior doors where keyed entry and security is needed; fully reversible lever; fits both right handed and left handed doors; ANSI/BHMA Grade 2 security; fits door thickness of 1-3/8" to 1-3/4"; features adjustable latch to fit all standard door preparations; featuring SmartKey re-key technology; re-key the lock yourself in seconds in 3 easy steps. Lifetime mechanical and finish warranty.
LEVER ENTRY ACCENT KYD AGD BRZ Midwest 04188 Long Lag Shield Midwest 04177 Short Lag Shield
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. Midwest Lag Shield, Long, 1/2 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Lag Shield, Short, 3/8 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete
DOOR LVRENT ASHFIELD740ADL-11P DOOR LVRENT ASHFIELD 740ADL-15 DOOR LV ENT RCAL RC740PML15SMT
Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; fully reversible lever - fits both right handed and left handed doors; Lifetime mechanical and finish warranty; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Features adjustable latch to fit all standard door preparations; ANSI/BHMA Grade 2 security; fully reversible lever - fits both right handed and left handed doors; Lifetime mechanical and finish warranty; patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. The Pembroke delivers style evoking a sense of antiquity. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 2 security. Fully reversible lever - fits both right handed and left handed doors. Featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. SmartKey cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Lifetime mechanical and finish warranty.
DOOR LVR ENT RCALSMT740PML-11P Protec-Kote SDK-C262W-525 Weather Resistant Deck Screw 2-5/8 in Schlage F51 Elan Straight Entry Lever Lock
The Pembroke delivers style evoking a sense of antiquity. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 2 security. Fully reversible lever - fits both right handed and left handed doors. Featuring "SmartKey" Re-key technology. The lock you can re-key yourself in seconds. SmartKey cylinders feature a stainless steel side locking bar, racks and pins for increased strength and security. Patented side locking bar technology offers improved security by protecting against lock bumping, an attack technique used to defeat conventional pin and tumbler locks. Lifetime mechanical and finish warranty. Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip. For professional needs such as small apartments, restrooms, small offices, etc. Specifically designed where basic security needs or specific codes must be met, but usage is low to moderate. Unlocked or locked by keyed lever outside or turnbutton lever inside. Emergency exit feature, no unlocking required for panic exit, inside knob always unlocked. 1-piece knob for better security and appearance. Solid brass trim and all metal parts. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4" t-strike, full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: A 156.2 Grade 2 requirements.
LEVER ENTRY ACCENT KYD MAT BLK ENTRY BIRMINGHAM SATIN NICKEL ENTRY LATITUDE SATIN NICKEL CE
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. Resistant to pick and bump security attacks; certified as meeting ANSI Grade 2 standards; easy 3-step installation, only a screwdriver is needed; quality materials and construction for exceptional security; lifetime finish and mechanical guarantee (Oil-Rubbed Bronze is only a mechanical guarantee); quality finishes coordinate with plumbing and lighting. Secure Key technology. Resistant to pick and bump security attacks; certified as meeting ANSI Grade 2 standards; easy 3-step installation, only a screwdriver is needed; quality materials and construction for exceptional security; lifetime finish and mechanical guarantee (Oil-Rubbed Bronze is only a mechanical guarantee); quality finishes coordinate with plumbing and lighting. Secure Key technology.
ENTRY ACCENT AGED BRONZE CAMEL ENTRY ACCENT SATIN NICKEL CAME Midwest 04125 Wedge Anchor
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. Midwest Wedge Anchor, Heavy Duty, 3/8 in Anchor, 3-3/4 in Anchor, Zinc Plated
Midwest 04130 Wedge Anchor Kwikset Commonwealth 740 Signature Entry Lever Lock DOOR LVR ENT NOHAND 740CHL-11P
Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 5-1/2 in Anchor, Zinc Plated For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER:  5-pin. FACEPLATE:  1" x 2-1/4". STRIKE:  2-1/4" full lip. BOLT: 1/2" throw. Nickel plated. ANSI/BHMA:  Grade 2. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" - 2-3/4" adjustable latch. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER:  5-pin. FACEPLATE:  1" x 2-1/4". STRIKE:  2-1/4" full lip. BOLT: 1/2" throw. Nickel plated. ANSI/BHMA:  Grade 2.
LEVER ENTRY FLAIR KYD AGED BRZ LEVERSET L6 ENTRY REV POL BRS ENTRANCE LEVER CTL G2 2-3/4BS
For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turnbutton lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4", full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For keyed exterior doors. Both levers locked or unlocked by key outside or turnbutton inside. All metal components, constructed of die cast materials. Solid steel latch assembly. Rust resistant, solid brass, one piece keyway for more security. Seamless one-piece lever for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLT: 1/2" throw. ANSI/BHMA: Exceeds Grade 3 Standards. 6-WAY ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. Reversible handing. Complies with ANSI A156.2, Series 4000, Grade 2 (400,000 cycles) lever, UL listed for 3 hour fire door. Door range: 1-3/8" to 2". Backset: 2-3/4" standard. Strike: T strike (1-1/8" x 2-3/4"). Cylindrical, steel coated with zinc dichromate (corrosion resistance). Latch bolt is operated by a lever from either side: outside lever is locked by turn button from inside; it is unlocked by a key from outside or rotating inside lever. There is a 6 pin SCC keyway with 2 nickel keys per lock.
Midwest 04187 Long Lag Shield LEVERSET L6 ENTRY REV SAT NIC LEVER ENTRY GRADE 2 S/S ZINC
Midwest Lag Shield, Long, 3/8 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete For keyed exterior doors. Both levers locked or unlocked by key outside or turnbutton inside. All metal components, constructed of die cast materials. Solid steel latch assembly. Rust resistant, solid brass, one piece keyway for more security. Seamless one-piece lever for extra strength. Easy installation. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" to 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass;  (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLT: 1/2" throw. ANSI/BHMA: Exceeds Grade 3 Standards. 6-WAY ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; includes both square and 1/4" radius corner strikes. Reversible handing. For Keyed Exterior Doors. Both Levers Lock Or Unlock By Key Outside Or Turnbutton Inside. All Metal Components. Solid Steel Deadlocking Latch Assembly. Rust Resistant Solid Brass Keyway For More Security. Seamless One-Piece Lever For Extra Strength. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" X 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" To 1-13/16" Doors. CYLINDER: 6-Pin, Removable SC1 Keyway, Solid Brass, One Piece; Re-Keys To Schlage. With 2 Nickel Plated, Solid Brass Keys. FACEPLATES: 1-1/8 X 2-3/4 STRIKES: 1-1/8" X 2-3/4" Square Corner T-Strike. BOLT: Steel 1/2" Throw. HANDING: Reversible For Right Or Left Hand Doors. Please Follow Installation Instructions Carefully. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating.
LEVERSET LYE ENTRY POL BRASS  Kreg KJDECKSYS Deck Jig System LEVERSET LYE ENTRY SATIN NICKL
For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Reversible handing. Adjustable 6-way latch and radius round corner strike. Easy-grip handle gives a secure hold and complete control over joints. Three "Hardened Steel" drill guides keep specialized stepped bit and driver bit at the precise, optimal angle. Spacer rings ensure accurate deck board spacing for proper drainage and longer deck life. Works with 4/4 to 5/4 (3/4" to 1-1/8). Not designed for use with 2x material including 2x4s, 2x6s, 2x8s, etc. Includes Deck Jig, 100 Protec-Kote deck screws, 6" Deck Jig drill bit, 6" KTX square driver bit, (3) 5/16" and 1/4" spacer rings, (2) stop collars, an allen wrench, instructional DVD and carrying case. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Reversible handing. Adjustable 6-way latch and radius round corner strike.
Midwest 04122 Wedge Anchor Deckmaster G5 DMG5CP Grooved Deck Clip LEVERSET LYE ENTRY AGED BRONZE
Midwest Wedge Anchor, Heavy Duty, 1/4 in Anchor, 3-1/4 in Anchor, Zinc Plated Securely grips deck boards locking them in place. The base of the clip makes gapping boards easy creating and even 1/5" gap between deck boards.  Recommended for use with:  Fiberon, TREX, Gossen, Kleer, Ipe Hardwoods, Abbaco Hardwood, Nyloboard, Latitudes, ChoiceDek, MoistureShield, Veranda, WeatherReady, EverNew, Duralift, ModernView, and any 1/8" grooved decking. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Reversible handing. Adjustable 6-way latch and radius round corner strike.
Schlage Plymouth Electronic Entry Lever Lockset Camelot F Accent Electronic Entry Lever Lockset Camelot F Accent Electronic Entry Lever Lockset
Keyless access. Allows homeowners to choose whether the door remains locked (with a code required for entry) or unlocked (no code required for entry) by rotating the inside thumb turn. Ideal for garage entry doors, home offices, storage rooms, etc. Patented commercial grade clutching motor drive. Vandal resistant clutching lever and knob design. Code control; pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Grade 2 ANSI/BHMA certified. Warning code sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Blue LEDs illuminate the keypad on demand. Emergency exit feature; allows for panic-free exit. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). LATCH: 1" x 2-1/4" radius corner faceplate, 7/8" housing diameter, Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-5/8" x 2-1/4", square and radius corner, full lip, no box, latch strike. BACKSET: Universal backset, fits 2-3/8" to 2-3/4" backsets. KEYS: Nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons. Keyless access. Allows homeowners to choose whether the door remains locked (with a code required for entry) or unlocked (no code required for entry) by rotating the inside thumb turn. Ideal for garage entry doors, home offices, storage rooms, etc. Patented commercial grade clutching motor drive. Vandal resistant clutching lever and knob design. Code control; pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Grade 2 ANSI/BHMA certified. Warning code sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Blue LEDs illuminate the keypad on demand. Emergency exit feature; allows for panic-free exit. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). LATCH: 1" x 2-1/4" radius corner faceplate, 7/8" housing diameter, Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-5/8" x 2-1/4", square and radius corner, full lip, no box, latch strike. BACKSET: Universal backset, fits 2-3/8" to 2-3/4" backsets. KEYS: Nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons. Keyless access. Allows homeowners to choose whether the door remains locked (with a code required for entry) or unlocked (no code required for entry) by rotating the inside thumb turn. Ideal for garage entry doors, home offices, storage rooms, etc. Patented commercial grade clutching motor drive. Vandal resistant clutching lever and knob design. Code control; pre-set with random 6-digit programming code and two random 4-digit user codes. 19 user code capacity; 10,000 user code combinations. Grade 2 ANSI/BHMA certified. Warning code sounds after four incorrect codes entered; keypad disabled for 30 seconds. Mechanical key override. Blue LEDs illuminate the keypad on demand. Emergency exit feature; allows for panic-free exit. Locks can be re-keyed to match existing locks. 9-volt alkaline battery included. Fits most standard door preps. Just a screwdriver needed for installation on pre-prepped doors. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD). LATCH: 1" x 2-1/4" radius corner faceplate, 7/8" housing diameter, Triple-Option square corner, radius corner and circular drive-in faceplates. STRIKES: 1-5/8" x 2-1/4", square and radius corner, full lip, no box, latch strike. BACKSET: Universal backset, fits 2-3/8" to 2-3/4" backsets. KEYS: Nickel silver cut keys, 5-pin, C-section. Minimum 5-1/2" center-to-center distance between cross bore holes. All-metal chassis and escutcheons. Silicone rubber, wear-resistant buttons.
DOOR LVR KEYPAD SMT15 911TNL  DOOR LVR KEYPAD SMT11P 911TNL Kwikset Balboa Signature 94050-424 Wave Entry Lever Lockset
Designed with a sleed style to complement your home's interior, you can lock up your home office, wine cellar or storage room and never have to worry about keys; to gain entry, simply enter your personalized access code, while locking is as easy as touching a button; "SmartCode" is easy to install, program and use and operates on (4) AA batteries; it also features "SmartKey" re-key technology as the back-up keyway; fitw standard doors (1-3/8" - 2"); no new screw holes required. Designed with a sleed style to complement your home's interior, you can lock up your home office, wine cellar or storage room and never have to worry about keys; to gain entry, simply enter your personalized access code, while locking is as easy as touching a button; "SmartCode" is easy to install, program and use and operates on (4) AA batteries; it also features "SmartKey" re-key technology as the back-up keyway; fitw standard doors (1-3/8" - 2"); no new screw holes required. The Balboa lever?s wave style design is an attractive addition to any home. Features adjustable latch to fit all standard door preparations. ANSI/BHMA Grade 3 Security. Non-handed lever design to fit both right and left handed doors.  Lifetime mechanical and finish warranty.
Schlage Plymouth Electronic Entry Door Lever EB-TY 175-EBTYS Hidden Deck Fastener LEVER ENTRY TOUCH SATIN NICKEL
Flexibility to choose; switch from automatic relocking to unlocked as needed; provides additional layers of keyless security and protection inside your home or office; ideal for garage entry doors, home offices, computer rooms, utility rooms, etc.; easily replace most existing locks with a screwdriver in about 30 minutes; no programming required; preset with two user codes so it's ready to use right out of the box; ANSI/BHMA Grade 2 certifies; fits standard door prep; easy installation, no need to run wires; battery operated with over 3 year battery life. Ideal for 1"+ materials with 6" board width on 16" joist spacing. Economical, efficient and attractive fasteners are essentially invisible. All fastening work done from top side. Relieves stress caused by natural shrinkage of deck boards. Only one EB-TY and one screw required at each board/joist intersection. Affords easy deck resurfacing by eliminating nail pops. Corrosion-resistant trim head Swaneze stainless steel finish screws included. Formed from UV-resistant polypropylene; Deck Packs Contains: 175 EB-TYs, 190 screws (#7 x 2-1/2"), 12 IPE wood plugs. Fingerprint-resistant touchscreen; Grade 2 security rating; 2 year battery life with 9V battery backup; LED down lighting on the numbers and lever; Dedicated icons for low battery and programming mode; Keyless convenience - no more keys to lose, hide, carry or forget.
LEVER ENTRY TOUCH AGED BRONZE Schlage F51 Flair Entry Lever Lock Kwikset Delta 405 Signature Straight Entry Lever Lock
Fingerprint-resistant touchscreen; Grade 2 security rating; 2 year battery life with 9V battery backup; LED down lighting on the numbers and lever; Dedicated icons for low battery and programming mode; Keyless convenience - no more keys to lose, hide, carry or forget. For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turnbutton lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 1-5/8" x 2-1/4", full 1-1/8" lip. BOLT: 7/8" housing and 1" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Maximum Security locksets feature 2x strength full 1" throwbolt maximum security strike, and free-spinning guard. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3.
Kwikset Dorain 405 Entry Lever Lock Schlage F51 Accent Entry Lever Lockset Kwikset Dorain 405 Entry Lever Lockset
For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3. For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3.
Kwikset Delta 405 Signature Straight Entry Lever Lock Schlage F51 Accent Entry Lever Lockset Schlage F51 Flair Entry Lever Lockset
For keyed exterior doors. Both levers lock or unlock by key outside or turnbutton inside. Maximum Security locksets feature 2x strength full 1" throwbolt maximum security strike, and free-spinning guard. DOOR PREP: 2-1/8" Cross Bore, 1" Edge Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard, 2-3/4" optional. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin. FACEPLATE: 1" x 2-1/4" round corner. STRIKES: 2-1/4" full lip round corner. BOLT: 1/2" throw. HANDING: Non-handed. ANSI/BHMA:  Grade 3. For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turn button lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. All locksets have the same finish for both interior and exterior parts except the Bright Brass finish which has bright brass finish on all interior parts and Ultima Lifetime Anti-Tarnish finish on all exterior parts. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2). FACEPLATE: 1" x 2-1/4". STRIKES: 2-1/4" full lip. BOLT: 1/2" throw. ANSI/BHMA: Meets 400,000 cycle ANSI A 156.2 Grade 2 requirements. ADA compliant. TRIPLE OPTION UNIVERSAL: Fits all doors; 2-3/4" or 2-3/8" backset; square corner, round corner, or drive-in preps. For residential single and multi-family doors. Unlocked or locked by keyed lever outside or turnbutton lever inside; inside lever always unlocked. Zinc based and plated, solid lever designing. Pressure cast zinc tubular lock housing. Key removable outside lever for easy cylinder replacement. 3 piece assembly. DOOR PREP: 2-1/8" crossbore; 7/8" or 1" edge bore; 1" x 2-1/4" latch face. DOOR THICKNESS: 1-3/8" to 1-3/4". CYLINDER: 5-pin tumbler C keyway with nickel silver pins and keys (2).