Home > FASTENERS > METAL SHAPES & STOCKS > METAL SHAPES & STOCKS > THREADED ROD COUPLERS
Sort By:
1
Midwest 04287 Light Duty Conical Anchor Midwest 04286 Light Duty Conical Anchor Midwest 04288 Light Duty Conical Anchor
Midwest Conical Anchor, Light Duty, NO 10-12 Thread, 1 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes Midwest Conical Anchor, Light Duty, NO 8-10 Thread, 7/8 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes Midwest Conical Anchor, Light Duty, NO 14-16 Thread, 1-1/2 in Anchor, Plastic, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
Stanley 179283 Threaded Rod Stanley 179291 Threaded Rod Stanley 179317 Threaded Rod
Stanley Threaded Rod, NO 6-32 Thread, 1 ft Overall Length, Coarse Thread, Low Carbon Steel, Zinc Plated Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Stanley 179309 Threaded Rod Stanley 180158 Square Flat Key Stock Stanley 179325 Threaded Rod
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Stanley Key Stock, Square, Flat, 1/8 in Width, 1 ft Overall Length, Steel, Zinc Plated Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Twist-N-Lock 11364 Drywall Anchor Twist-N-Lock 11353 Light Duty Drywall Anchor Stanley 180166 Square Key Stock
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness: 3/4". #6 x 1-1/4"sheet metal screw. Accommodates loads up to 50 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks. Stanley Key Stock, Square, 3/16 in Width, 12 in Overall Length, Steel
Stanley 179499 Threaded Rod Stanley 179481 Threaded Rod Stanley 179408 Threaded Rod
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Stanley 179416 Threaded Rod Stanley 182709 Coupling Nut Stanley 182691 Coupling Nut
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Used for joining threaded rods. Used for joining threaded rods.
Stanley 182899 Threaded Rod Stanley 180174 Square Key Stock Stud Solver 29503 Hollow Wall Anchor
Stanley Threaded Rod, NO 6-32 Thread, 1 ft Overall Length, Solid Brass Stanley Key Stock, Square, 1/4 in Width, 12 in Overall Length, Steel Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Stanley 179333 Threaded Rod K & S 501 Music Wire K & S 500 Music Wire
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. K & S Music Wire, 0.032 in Wire, 36 ft Length K & S Music Wire, .025 in Wire, 36 ft Length, Spring Steel, ASTM A228, 341000 - 377000 psi Tensile
K & S 497 Music Wire K & S 503 Music Wire Stanley 340869 Threaded Rod
K & S Music Wire, 0.039 in Wire, 36 ft Length, Spring Steel, ASTM A228, 318000 - 352000 psi Tensile K & S Music Wire, 0.55 in Wire, 36 ft Length, Spring Steel, ASTM A228, 300000 - 331000 psi Tensile Stanley Threaded Rod, NO 6-32 Thread, 3 ft Overall Length, Coarse Thread, Low Carbon Steel, Zinc Plated
K & S 502 Music Wire Stanley 340877 Threaded Rod K & S 505 Music Wire
K & S Music Wire, 0.047 in Wire, 36 ft Length, Spring Steel, ASTM A228, 300000 - 331000 psi Tensile Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. K & S Music Wire, 5/64 in Wire, 36 ft Length, Spring Steel, ASTM A228, 282000 - 312000 psi Tensile
Stanley 179424 Threaded Rod K & S 506 Music Wire COUPLER GALV 3/8-16IN
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. K & S Music Wire, 3/32 in Wire, 36 ft Length, Spring Steel, ASTM A228, 274000 - 303000 psi Tensile Designed to connect two pieces of threaded rod. UNC coarse thread sizes. Corrosion-resistant galvanized finish.
Stanley 179507 Threaded Rod Stanley 179341 Threaded Rod National Hardware 4001BC Corrosion Resistant Threaded Rod
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Stanley Threaded Rod, 7/16-14 Thread, 1 ft Overall Length, Coarse Thread, Steel, Zinc Plated National Hardware Threaded Rod, Corrosion Resistant, Series: 4001BC, NO 8 - 32 Thread, 12 in Overall Length, UNC Thread, Solid Brass, Solid Brass, 220 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects
Stanley 179432 Threaded Rod Stanley 179358 Threaded Rod Cobra 163Y Special Short Drive Hollow Wall Anchor
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Simply taps into drywall, no pre-drilling, vibration resistant.
National Hardware 4001BC Corrosion Resistant Threaded Rod Walldriller 016S Hollow Wall Anchor Stanley 179515 Threaded Rod
National Hardware Threaded Rod, Corrosion Resistant, Series: 4001BC, NO 10 - 24 Thread, 12 in Overall Length, UNC Thread, Solid Brass, Solid Brass, 250 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Triplegrip 171S Wall Anchor Cobra Anchors 173S Wall Anchor Stanley 182717 Coupling Nut
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Used for joining threaded rods.
Cobra 133Y Long Hollow Wall Anchor Triplegrip 170S Wall Anchor Triplegrip 172S Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Cobra 132Y Short Hollow Wall Anchor Cobra 137Y Short Hollow Wall Anchor Cobra 131Y Extra Short Hollow Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 162Y Long Drive Hollow Wall Anchor Cobra 161Y Short Drive Hollow Wall Anchor Walldriller 034S Hollow Wall Anchor
Simply taps into drywall, no pre-drilling, vibration resistant. Simply taps into drywall, no pre-drilling, vibration resistant. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley 180182 Square Key Stock Cobra 185S Screw Anchor National Hardware 4001BC Corrosion Resistant Threaded Rod
Stanley Key Stock, Square, 5/16 in Width, 12 in Overall Length, Steel Notched wings prevent rotation in wall. National Hardware Threaded Rod, Corrosion Resistant, Series: 4001BC, 1/4-20 Thread, 12 in Overall Length, UNC Thread, Solid Brass, Solid Brass, 475 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects
Stanley 179440 Threaded Rod Walldriller 022S Hollow Long Wall Anchor Stanley 180190 Square Key Stock
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Stanley Key Stock, Square, 3/8 in Width, 12 in Overall Length, Steel
Walldriller 024S Hollow Long Wall Anchor Cobra 187S Screw Anchor Cobra 197S Screw Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Notched wings prevent rotation in wall. Notched wings prevent rotation in wall.
Cobra 141Y Short Hollow Wall Anchor Cobra 138Y Long Hollow Wall Anchor Cobra Anchors WallDriller Hollow Long Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Cobra 193S Screw Anchor Wallgripper 750S Wall Anchor Walldriller 016R Hollow Wall Anchor
Notched wings prevent rotation in wall. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Wellington Planet Braided Clothesline Wellington 28438 Braided Clothesline National Hardware 4006BC Threaded Rod
Constructed with lockstitched jacket of cotton and synthetic yarns. Ties easily, knots hold securely. Flexible and easy to handle. Labeled and shrink-wrapped hank. Constructed from a specially formulated, high strength synthetic fiber. Bright white, 3/16" Nominal Diameter. Labeled and shrink-wrapped. White. National Hardware Threaded Rod, Series: 4006BC, NO 10 - 32 Thread, 36 in Overall Length, UNF Thread, Steel, Zinc Plated, 300 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects
Stanley 179457 Threaded Rod Stanley 179580 Threaded Rod Walldriller 042S Hollow Long Wall Anchor
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
TW Evans Cordage 775-050-03 Clothesline Stanley 179523 Threaded Rod Stanley 182725 Coupling Nut
Heavy protective plastic cover over a stretch resistant poly core. The #5 (5/32?) fits most outdoor and indoor reel dryers. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Used for joining threaded rods.
Stanley 179366 Threaded Rod Stanley 346742 Square Key Stock Walldriller 029R Hollow Long Wall Anchor
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Stanley Key Stock, Square, 7/16 in Width, 12 in Overall Length, Steel, Zinc Plated Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Wellington A5214H0050H10 Braided Clothesline National Hardware 4001BC Corrosion Resistant Threaded Rod Wallgripper 753S Wall Anchor
Wellington Clothesline, Braided Multi-Purpose, Series: A5214H0050H10, 7/32 in Diameter, 50 ft Length, 12 lb, Cotton, Synthetic Core National Hardware Threaded Rod, Corrosion Resistant, Series: 4001BC, 5/16-18 Thread, 12 in Overall Length, UNC Thread, Solid Brass, Solid Brass, 750 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Cobra Anchors WallGripper Hollow Wall Anchor With Bolt Walldriller 034R Hollow Wall Anchor Stanley 179374 Threaded Rod
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Stanley 179598 Threaded Rod Stanley 180208 Square Key Stock Midwest 10413 Conical Anchor
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Stanley Key Stock, Square, 1/2 in Width, 12 in Overall Length, Steel Midwest Conical Anchor, NO 10-12 Thread, 1 in Anchor, Plastic, With Screw, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes
Midwest 10410 Conical Anchor Midwest 10411 Conical Anchor Midwest 10413 Conical Anchor
Midwest Conical Anchor, NO 6-8 Thread, 3/4 in Anchor, Plastic, With Screw Midwest Conical Anchor, NO 8-10 Thread, 7/8 in Anchor, Plastic, With Screw Midwest Conical Anchor, NO 14-16 Thread, 1-1/2 in Anchor, Plastic, With Screw
Cobra Anchors DrillerToggle Wall Anchor With Bolt Drillertoggle 363S Hollow Wall Anchor With Bolt Stanley 218271 Threaded Rod
Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Stanley Threaded Rod, 1/4-28 Thread, 3 ft Overall Length, Fine Thread, Steel, Zinc Plated
Stanley 218289 Threaded Rod Stanley 179531 Threaded Rod Cobra 197R Screw Anchor
Stanley Threaded Rod, 5/16-24 Thread, 3 ft Overall Length, Fine Thread, Steel, Zinc Plated Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Notched wings prevent rotation in wall.
Stanley 179465 Threaded Rod Stanley 179606 Threaded Rod Stanley 182964 Threaded Rod
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Stanley Threaded Rod, 3/8-16 Thread, 1 ft Overall Length, Solid Brass
Cobra 193R Screw Anchor Drillertoggle 367S Hollow Wall Anchor With Bolt Stanley 218297 Threaded Rod
Notched wings prevent rotation in wall. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Stanley Threaded Rod, 3/8-24 Thread, 3 ft Overall Length, Fine Thread, Steel, Zinc Plated
Stanley 346684 Threaded Rod Walldriller 042R Hollow Long Wall Anchor Wellington K1010Y0100W76 Clothesline
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Runs smoothly around pulleys, minimum stretch, water and mildew resistant.
Wellington Puritan Braided Clothesline Triplegrip 171R Wall Anchor Midwest 10421 Wall Anchor
Constructed from a specially formulated, high strength synthetic fiber. Bright white, 3/16" Nominal Diameter. Labeled and shrink-wrapped. White. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Midwest Wall Anchor, NO 8 Anchor, 1-1/4 in Anchor, Plastic, For Medium Duty Application
Midwest 10424 Light Duty Hollow Wall Anchor Midwest 10420 Hollow Wall Anchor Midwest 11211 Wall Anchor
Midwest Hollow Wall Anchor, Light Duty, NO 6 Anchor, 1 in Anchor, Plastic, 75 lb Load Capacity, With Screw, For Hollow or Solid Wall Applications, Fasten Light or Medium Weight Fixtures such as Mirrors, Pictures and Drapes Midwest Hollow Wall Anchor, NO 8 Anchor, 1-1/4 in Anchor, Zinc Plated, 75 lb Load Capacity, With Screw Midwest Wall Anchor, Medium Duty, Gold
Cobra Anchors 172R Wall Anchor Cobra 187R Screw Anchor Triplegrip 170R Wall Anchor
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Notched wings prevent rotation in wall. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Teks 21500 Lathe Screw Teks 21512 Lathe Screw Teks 21516 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21504 Lathe Screw Teks 21508 Lathe Screw Wellington Eclipse Braided Clothesline
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. Manufactured with a jacket of lockstitched cotton and synthetic yarns. Popular as a pulley line in large metropolitan cities. Easily tied and will withstand the wear and tear of being frequently put up and taken down. Diameter sized for secure clothespin gripping. 7/32" Nominal Diameter. Labeled and shrink-wrapped hank.
Triplegrip 173R Wall Anchor Teks 21532 Lathe Screw Teks 21520 Lathe Screw
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21528 Lathe Screw Teks 21536 Lathe Screw Teks 21524 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Stanley 179549 Threaded Rod Porteous 170-2803-504/024 Threaded Rod Cobra Anchors DrillerToggle Wall Anchor With Bolt
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Porteous Threaded Rod, 1/2-13 Thread, 3 ft Overall Length, NC Thread, Carbon Steel, ASTM A307, Grade: A, Hot Dip Galvanized Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Wallgripper 750R Wall Anchor Stanley 179473 Threaded Rod Stanley 346635 Threaded Rod
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. For anchor bolts, clamps, hangers and U-bolts.
Walldriller 028L Hollow Long Wall Anchor Stanley 179614 Threaded Rod Walldriller 027L Anchor Kit
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
National Hardware 4035BC Threaded Rod Stanley 179622 Threaded Rod K & S 509 Music Wire
National Hardware Threaded Rod, Series: 4035BC, 6 mm X 1 m Thread, Metric Thread, Steel, Zinc Plated, 520 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. K & S Music Wire, 3/16 in Wire, 36 ft Length, Steel, ASTM A228
Walldriller 021M Hollow Long Wall Anchor Drillertoggle 364R Hollow Wall Anchor With Bolt Triplegrip 172M Wall Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Stanley 346643 Threaded Rod Stanley 218313 Threaded Rod Porteous 170-3003-504/024 Threaded Rod
For anchor bolts, clamps, hangers and U-bolts. Stanley Threaded Rod, 1/2-20 Thread, 3 ft Overall Length, Fine Thread, Steel, Zinc Plated Porteous Threaded Rod, 5/8-11 Thread, 3 ft Overall Length, NC Thread, Carbon Steel, ASTM A307, Grade: A, Hot Dip Galvanized
Triplegrip 171M Wall Anchor Triplegrip 170M Wall Anchor Stanley 346692 Threaded Rod
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
National Hardware 4035BC Threaded Rod Stanley 179556 Threaded Rod Twist-N-Lock 25310 Drywall Anchor
National Hardware Threaded Rod, Series: 4035BC, 8 mm X 1 m Thread, Metric Thread, Steel, Zinc Plated, 975 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc.
Triplegrip 173M Wall Anchor N825-014 4012BC 3/4-10X24 T-RO National Hardware 4035BC Threaded Rod
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and marine projects. Consists of UNC coarse threads. Can be drilled, cut, heated, shaped. Meets ASTM A307 Grade A, ASTMA153. Corrosion-resistant galvanized finish. National Hardware Threaded Rod, Series: 4035BC, 10 mm X 1 m Thread, Metric Thread, Steel, Zinc Plated, 1500 lb Safe Working Load, For Hanging, Connecting, Clamping and Supporting in Plumbing, Heating and Electrical Applications and Other Do-It-Yourself Projects
ROD THREAD 12MMX1M ZINC METRIC Walldriller 041M Hollow Long Wall Anchor K & S 508 Music Wire
Designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. K & S Music Wire, 5/32 in Wire, 36 ft Length, Steel
Stanley 346650 Threaded Rod Porteous 170-2806-504/024 Threaded Rod Stanley 179630 Threaded Rod
For anchor bolts, clamps, hangers and U-bolts. Porteous Threaded Rod, 1/2-13 Thread, 6 ft Overall Length, NC Thread, Carbon Steel, ASTM A307, Grade: A, Hot Dip Galvanized Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Wellington A5214Y0200H10 Braided Clothesline Stanley 346668 Threaded Rod Stanley 179564 Threaded Rod
Wellington Clothesline, Braided Multi-Purpose, Series: A5214Y0200H10, 7/32 in Diameter, 200 ft Length, 12 lb, Cotton, Synthetic Core, For Indoor and Outdoor For anchor bolts, clamps, hangers and U-bolts. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Stud Solver 25316 Hollow Wall Anchor Walldriller 013M Hollow Wall Anchor Wallgripper 750M Wall Anchor
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Walldriller 033M Hollow Wall Anchor SCREW LATH SHARP PT NO8 X3/4IN SCREW LATH SHARP PT NO8 X 1IN
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed.
Stanley 182683 Coupling Nut Triplegrip 172T Wall Anchor Stanley 346676 Threaded Rod
Used for joining threaded rods. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. For anchor bolts, clamps, hangers and U-bolts.
Stanley 179648 Threaded Rod Stanley 179572 Threaded Rod Walldriller 013T Hollow Wall Anchor
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
SCREW LATH DRILL PT NO8 X3/4IN SCREW LATH DRILL PT NO8 X 1IN Walldriller 021T Hollow Long Wall Anchor
Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley 182733 Threaded Rod Stanley 182659 Coupling Nut Stanley 179655 Threaded Rod
Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs. Used for joining threaded rods. Class 2A thread fit. Hot rolled, cold drawn, low carbon steel. Can be cut, heated and bent. Meets ASTM A307 specs.
Wellington 84806 Clothesline Stanley 182667 Coupling Nut Porteous 170-3206-504/024 Threaded Rod
Premium polished cotton clothesline. Constructed like a light-weight sash cord and polished for greater abrasion resistance. Used for joining threaded rods. Porteous Threaded Rod, 3/4-10 Thread, 6 ft Overall Length, NC Thread, Carbon Steel, ASTM A307, Grade: A, Hot Dip Galvanized
Walldriller 041T Hollow Long Wall Anchor Pro-Fit 0330004 Self-Drilling Screw Stanley 182675 Coupling Nut
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Metal to metal fastening 16 to 20 gauge. Used for joining threaded rods.
Stanley 179663 Threaded Rod Pro-Fit 0290014 Self-Piercing Screw Porteous 170-3210-504/024 Threaded Rod
Stanley Threaded Rod, NO 1-8 Thread, 6 ft Overall Length, Steel, Zinc Plated Metal to metal fastening 20 to 25 gauge. 400 count per lb. Porteous Threaded Rod, 3/4-10 Thread, 10 ft Overall Length, NC Thread, Carbon Steel, ASTM A307, Grade: A, Hot Dip Galvanized
SCREW SHIM 1/4X3-1/8IN
SCREW SHIM 1/4X3-1/8IN
Our Price: $192.53
Zero stripping recessed star drive. 4-point 3/8" diameter threaded sleeve provides a secure hold in your wooden frame. Micro-adjustments allow for an absolutely plumb installation. Use with GRK's Top Star Crown and T-15 Star bit system. For shim free installation: of wooden doors, windows, insulation, paneling, built-in wall units and cabinets.
   
 
1