Home > FASTENERS > CHAIN, CABLE, ROPE > WIRE / CABLE > CABLE CLAMPS/FERRULES
Sort By:
1
National Hardware MP3230B Wire Cable Clamp National Hardware MP3230B Wire Cable Clamp Cambell T7670409 Wire Rope Clip
National Hardware Wire Cable Clamp, Series: MP3230B, 1/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Wire Cable Clamp, Series: MP3230B, 1/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware 3152BC Lap Link National Hardware 3152BC Lap Link National Hardware MP3230B Wire Cable Clamp
LAP LINKS 1/8IN ZN PLT
Our Price: $0.73
LAP LINKS 3/16IN ZN PLT
Our Price: $0.76
National Hardware Lap Link, Series: 3152BC, 1/8 in, Steel, Zinc Plated, 120 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Lap Link, Series: 3152BC, 3/16 in, Steel, Zinc Plated, 225 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Wire Cable Clamp, Series: MP3230B, 3/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Campbell T5950124 Repair Lap Link Cambell T7670429 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230B, 1/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 1 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
National Hardware 3152BC Lap Link Cambell T7670439 Wire Rope Clip National Hardware MP3230BC Wire Cable Clamp
LAP LINKS 1/4IN ZN PLT
Our Price: $1.03
National Hardware Lap Link, Series: 3152BC, 1/4 in, Steel, Zinc Plated, 500 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230BC, 5/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an eye or Loop on Wire Rope
Cambell T7670449 Wire Rope Clip Wellington M3004Z0147 Gardening Jute Twine 147 ft L National Hardware MP3230B Wire Cable Clamp
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Versatile jute twine is used for everything from gardening to package wrapping. WARNING: Not recommended for uses where personal safety is involved. National Hardware Wire Cable Clamp, Series: MP3230B, 3/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 5 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Cambell T7670459 Wire Rope Clip FERRULE /TOOL ALUM 1/16IN     FERRULE /TOOL ALUM 3/32IN
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
National Hardware 3152BC Lap Link FERRULE /TOOL ALUM 1/8IN      Campbell T5950724 Repair Lap Link
LAP LINKS 5/16IN ZN PLT
Our Price: $1.76
National Hardware Lap Link, Series: 3152BC, 5/16 in, Steel, Zinc Plated, 725 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
FERRULE/TOOL ALUMINUM 1/16IN  FERRULE/TOOL ALUMINUM 1/8IN   FERRULE/TOOL ALUMINUM 3/32IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE/TOOL ALUMINUM 5/32IN  CABLE FERRULES-STOP 1/16      CABLE CLAMP WIRE SS 1/16
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. For use with wire cable.
FERRULE/TOOL ALUMINUM 3/16IN  Campbell B767-5314 Cable Ferrule/Stop FERRULE /TOOL ALUM 5/32IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
National Hardware 3152BC Lap Link National Hardware MP3230B Wire Cable Clamp FERRULE /TOOL ALUM 3/16IN
LAP LINKS 3/8IN ZN PLT
Our Price: $2.09
National Hardware Lap Link, Series: 3152BC, 3/8 in, Steel, Zinc Plated, 1450 lb Load Capacity, Bolt Fastener, For Joining Two Lengths of Chain Together or Accessories to a Chain National Hardware Wire Cable Clamp, Series: MP3230B, 1/2 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
Campbell B7675324 Cable Ferrule/Stop Cambell T7670479 Wire Rope Clip Campbell T5950924 Repair Lap Link
(2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Wellington 14258 3-Ply Twisted Jute Twine Wellington 12681 Twisted Kite Twine 600 ft L CLAMP CABLE SS 1/8IN
CABLE CLAMPS 1/8IN SS
Our Price: $2.57
Versatile jute twine is used for everything from gardening to package wrapping. Biodegradeable. WARNING: Not recommended for uses where personal safety is involved. Strong, nonconduction twisted polyester. Knots well and holds securely. Load limit 1 lb. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
Lehigh 405-12CC Twine CLAMP CABLE SS 3/16IN         Cambell T7670489 Wire Rope Clip
CABLE CLAMPS 3/16IN SS
Our Price: $2.77
Twisted cotton twine with low stretch. Knots and handles well. Great for clothesline, parcel post, and general purpose use. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Campbell B7675344/B7675444 Cable Ferrules and Stops Set LINK LAP ZINC PLATED 1/2IN    Weather Challenger 77950 Deck Screw
LAP LINKS 1/2IN ZN PLT
Our Price: $2.82
(2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Designed for joining two lengths of chain together or accessories to a chain. Link can be closed with a hammer or vise. Links must be completely closed to perform at rated capacity. Manufactured from steel. All weather galvanized finish.
Weather Challenger 77952 Deck Screw Weather Challenger 77954 Deck Screw Weather Challenger 77951 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
Baron C-260-1/8 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp Weather Challenger 77955 Deck Screw
Baron Wire Rope Clip, 1/8 in Opening, Malleable Iron, Galvanized National Hardware Wire Cable Clamp, Series: MP3230B, 5/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 4 in Width, 6 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope All weather galvanized finish.
Weather Challenger 77953 Deck Screw Koch 143161 Wire Rope Clip Cambell T7670499 Wire Rope Clip
All weather galvanized finish. U-bolts with saddles and bolts on either side. Pack includes 3 rope clips and a thimble. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
CABLE CLAMP WIRE SS 1/8       Baron C-260-3/16 Wire Rope Clip Wellington 14299 Twisted Parcel Post Twine
For use with wire cable. Baron Wire Rope Clip, 3/16 in Opening, Malleable Iron, Galvanized For wrapping packages, bundle tying and general around the house use. Good handling characteristics and knot holding ability. Made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber. Natural color. WARNING: Not recommended for uses where personal safety is involved.
Wellington 43887 1-Ply Twisted Sisal Twine 400 ft L CABLE CLAMP WIRE SS 3/16      FERRULE /TOOL ALUM 1/4IN
Economical. For many general purpose uses. Biodegradable. Natural tan color. WARNING: Not recommended for uses where personal safety is involved. For use with wire cable. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
Baron C-260-1/4 Wire Rope Clip Wellington 15661 Twisted Twine CLAMP CABLE SS 1/4IN
CABLE CLAMPS 1/4IN SS
Our Price: $3.44
Baron Wire Rope Clip, 1/4 in Opening, Malleable Iron, Galvanized For general home, business and commercial use. Good handling characteristics and knot holding ability. Twine pulls from center of coreless ball. Natural color. WARNING: Not recommended for uses where personal safety is involved. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
Wellington Puritan Twisted Cable Cord FERRULE/TOOL ALUMINUM 1/4IN   CABLE CLAMP WIRE SS 1/4
A natural biodegradable cord used for Seine Twine, Trot Line, Chalk and Mason Line. Cord pulls from center of coreless ball. Made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber content. Natural color. WARNING: Not recommended for uses where personal safety is involved. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. For use with wire cable.
Baron 660-1/2 Lap Link Wellington Puritan Braided Cable Cord National Hardware MP3230BC Wire Cable Clamp
Used to connect two pieces of chain - or chain to eyelet, snap, ring, etc. Has many uses, from bundle tying to drapery and venetian blind cord. Includes instructions for replacing venetian blind cord. Also use in macrame and other craftwork. Made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber content. WARNING: Not recommended for uses where personal safety is involved. National Hardware Wire Cable Clamp, Series: MP3230BC, 3/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Wellington TDNST160-6 Reusable Gardeners Twine CABLE CLAMP WIRE SS 5/16      Wellington 12605 Garden Twine
Nylon twine with dispenser. Great for clothesline, parcel post, and general purpose use. For use with wire cable. Multi-purpose cotton twine for general garden use; tying roses, vines and plants, laying out rows, etc. Good handling characteristics and knot holding ability. Made from spun yarn consisting of 70% Cotton, 30% textile by-products of unknown fiber content. Natural color. WARNING: Not Recommended for uses where personal safety is involved.
Wellington Puritan Twisted Baler Twine Campbell B7675354/B7675454 Cable Ferrules and Stops Set TW Evans Cordage 15-209 2-Ply Twine
Natural, unpolished. For general home, business and commercial use. Good handling characteristics and knot holding ability. Twisted cotton, parcel post twine made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber content. WARNING: Not recommended for uses where personal safety is involved. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Minimum stretch, all natural, biodegradeable.
Wellington TDC80-6 Food Safe Reusable Butchers Twine Lehigh Puritan 10334 Coreless Ball Twisted Cable Cord Lehigh Puritan 16195 Coreless Ball Cable Cord
Twisted cotton twine with dispenser. Great for kitchen, household, parcel post, wrapping, crafts, and general purpose use. Food safe. A natural biodegradable cord used for Seine Twine, Trot Line, Chalk and Mason Line. Cord pulls from center of coreless ball. Made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber content. Natural color. WARNING: Not recommended for uses where personal safety is involved. A natural biodegradable cord used for Seine Twine, Trot Line, Chalk and Mason Line. Cord pulls from center of coreless ball. Made from fine spun yarn consisting of 70% cotton, 30% textile by-products of unknown fiber content. Natural color. WARNING: Not recommended for uses where personal safety is involved.
Campbell T5950024 Repair Lap Link Weather Challenger 77965 Deck Screw Weather Challenger 77961 Deck Screw
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit. All weather galvanized finish. All weather galvanized finish.
Weather Challenger 77963 Deck Screw Weather Challenger 77966 Deck Screw Weather Challenger 77968 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
Weather Challenger 77969 Deck Screw Weather Challenger 77958 Deck Screw Weather Challenger 77960 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
CABLE CLAMP WIRE SS 3/8       CLAMP CABLE ZINC PLATED 1IN   National Hardware V4230 Weather Resistant Wire Cable Clamp
CABLE CLAMPS 1IN ZN PLT
Our Price: $6.59
CABLE CLAMPS 5/16IN SS
Our Price: $6.75
For use with wire cable. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 5/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3213BC Single Pulley CABLE CLAMP WIRE SS 1/2       Cambell T7670419 Wire Rope Clip
PULLEYS 1-1/2IN ZN PLT
Our Price: $7.12
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications For use with wire cable. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Protec-Kote SDK-C2W-100 Deck Screw National Hardware 3211BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 1-1/2IN ZN PLT
Our Price: $8.03
CABLE CLAMPS 3/16IN SS
Our Price: $8.18
Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip. National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3221BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp SCREW TRIM 8X2IN
PULLEYS 2IN ZN PLT
Our Price: $8.72
CABLE CLAMPS 3/8IN SS
Our Price: $8.98
SCREW TRIM 8X2IN
Our Price: $9.08
National Hardware Single Pulley, Series: 3221BC, 3/8 in Maximum Cable, 100 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, 0.39 in Diameter Groove, 2.61 in Overall Height, 2.63 in Overall Width, Joist Mounting, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
National Hardware 3213BC Single Pulley National Hardware 3219BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 2IN ZN PLT
Our Price: $9.16
PULLEYS 1-1/2IN ZN PLT
Our Price: $9.48
CABLE CLAMPS 1/4IN SS
Our Price: $9.52
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1-1/2 in Sheave Width, 0.39 in Diameter Groove, 2.77 in Overall Height, 2.23 in Overall Width, Wall, Ceiling Mounting, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/4 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
Weather Challenger 94005 Deck Screw National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 3215BC Swivel Hook Single Pulley
CABLE CLAMPS 1/2IN SS
Our Price: $10.09
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
All weather galvanized finish. National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/2 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
National Hardware 3217BC Scissor Hook Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp Cambell 7670704/52333 Cable Ferrule
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.18
CABLE CLAMPS 1/16IN SS
Our Price: $10.28
National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Extruded constrution. Used for creating eye terminations on cable or wire rope.
National Hardware 3211BC Single Pulley PULLEY ZINC PLATED 2IN        Campbell T5950324 Repair Lap Link
PULLEYS 2IN ZN PLT
Our Price: $10.31
PULLEYS 2IN ZN PLT
Our Price: $10.38
National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.95 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2 in Sheave Width, 3-1/4 in Side Plate Length, 1 Grooves, 0.39 in Groove, 2-1/2 in Overall Width, Wall/Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Zinc Plated, For Use With Rope or Cord in Indoor and Outdoor Applications For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
SCREW RT COMPOSITE 8X2-1/2IN  National Hardware V4230 Weather Resistant Wire Cable Clamp SCREW RT CMPST TRIM WHT 8X2IN
CABLE CLAMPS 1/8IN SS
Our Price: $10.96
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
National Hardware 3213BC Single Pulley Deuer DB15G Fixed Eye Gable Block Cambell 7670714/ACSL-3250 Cable Ferrule
PULLEYS 2-1/2IN ZN PLT
Our Price: $11.09
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.64 in Outer Diameter, 2-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope.
Cambell 7670724/52337 Cable Ferrule National Hardware 3213BC Single Pulley National Hardware 3211BC Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $11.91
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.01
Extruded constrution. Used for creating eye terminations on cable or wire rope. National Hardware Single Pulley, Series: 3213BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Fixed Eye Connection, 0.68 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.63 in Outer Diameter, 2-1/2 in Sheave Width, Swivel Eye Connection, 3.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, 4.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications
Wellington 14255 3-Ply Twisted Jute Twine PULLEY ZINC PLATED 2-1/2IN    Deuer DB15E Swivel Eye Cable Block
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.78
Versatile jute twine is used for everything from gardening to package wrapping. Biodegradeable. WARNING: Not recommended for uses where personal safety is involved. National Hardware Scissor Hook Single Pulley, Series: 3217BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2-1/2 in Sheave Width, 3.11 in Side Plate Length, 0.76 in Eye Diameter, 1 Grooves, 0.39 in Groove, 6.35 in Overall Height, 2.63 in Overall Width, Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Nickel Plated, For Use With Rope or Cord in Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
SCREW RT CMPST TRIM WHT 8X2-1/ National Hardware 3211BC Single Pulley National Hardware 3223BC Latching Swivel Hook Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $13.14
PULLEYS 2IN ZN PLT
Our Price: $13.36
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. National Hardware Single Pulley, Series: 3211BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.4 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, 5.19 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Latching Swivel Hook, Series: 3223BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 6.49 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18
Deuer DB20G Fixed Eye Gable Block SCREW RT CMPST TRIM WHT 8X2-3/ Camo 0350100S Deck Screw
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Deuer DB20HS Swivel Eye Scissor Hook Block Deuer DB20E Swivel Eye Cable Block Weather Challenger 00513 Deck Screw
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. All weather galvanized finish.
National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley SCREW FIN/TRIM 8X1-1/2IN
PULLEYS 3IN ZN PLT
Our Price: $16.24
PULLEYS 3IN ZN PLT
Our Price: $16.24
SCREW FIN/TRIM 8X1-1/2IN
Our Price: $16.50
National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
Deuer DB25HS Swivel Eye Scissor Hook Block Deuer DB25G Fixed Eye Gable Block Keystone 73428/5570 Utility Wire
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Keystone 73461/5610 Utility Wire Jackson Wire 16016344 Flexible Tie Wire Keystone 73468/5582 Utility Wire
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Deuer DB25E Swivel Eye Cable Block SCREW RT CMPST TRIM 9X3-1/8IN SCREW RT CMPST TRIM WHT 8X3-1/
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
Keystone 73483/5585 Utility Wire Camo 0350130S Deck Screw Simpson Strong-tie S07225FB1 Deck Screw
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.
Camo 0350150S Deck Screw Jackson Wire 16026344 Flexible Tie Wire SCREW FIN/TRIM 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $20.99
Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
TW Evans Cordage 37-301 Binder Twine Baron 260-7/8 Wire Rope Clip Swaneze S07C225FPT Deck Screw
Economical. For many general purpose uses. Biodegradable. Natural tan color. WARNING: Not recommended for uses where personal safety is involved. Baron Wire Rope Clip, 7/8 in Opening, Malleable Iron, Galvanized Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
Camo 0353600S Deck Screw Camo 0353100S Deck Screw Deuer DB30E Swivel Eye Cable Block
Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, Brown Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB30G Fixed Eye Gable Block SCREW RT CMPST TRIM 8X2-1/2IN Deuer DB30HS Swivel Eye Scissor Hook Block
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Camo 0345220S Deck Screw National Hardware V3225 Single Pulley Block and Tackle Set Tytan PBT20110TONBC/CTC Big and Round Baler Twine
PULLEYS 2IN ZN PLT
Our Price: $24.16
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. National Hardware Single Pulley Block and Tackle Set, Series: V3225, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 6.23 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Tytan Baler Twine, Big and Round, 20000 ft Length, Polypropylene, Orange, 110 Knot Strength
Tytan PBT20110TYNBC/P Big and Round Baler Twine Tytan PBT20110TYSTCTC Big and Round Baler Twine Camo 0345240S Deck Screw
Tytan Baler Twine, Big and Round, 20000 ft Length, Polypropylene, Yellow, 110 Knot Strength Tytan Baler Twine, Big and Round, 20000 ft Length, Polypropylene, Yellow, 110 Knot Strength For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Camo 0353150S Deck Screw Baron 260-1 Wire Rope Clip Camo 0350170S Deck Screw
Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White Baron Wire Rope Clip, 1 in Opening, Malleable Iron, Galvanized Camo Deck Screw, NO 8 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Deuer DB35G Fixed Eye Gable Block Cambell 7670744/52338 Cable Ferrule Tytan PBT9130TONBC/CTC Big and Round Baler Twine
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope. Tytan Baler Twine, Big and Round, 9000 ft Length, Polypropylene, Orange, 130 Knot Strength
Tytan PBT20130TONBC/CTC Big and Round Baler Twine Deuer DB35E Swivel Eye Cable Block SCREW FIN/TRIM 83-1/8IN
SCREW FIN/TRIM 83-1/8IN
Our Price: $31.88
Tytan Baler Twine, Big and Round, 20000 ft Length, Polypropylene, Orange, 130 Knot Strength Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
Barracuda BCDS212R3CP Composite Deck Screw Deuer DB35HS Swivel Eye Scissor Hook Block Camo 0350190S Deck Screw
Uses reverse threads at the top and serrated threads along the shaft to remove composite material as the screw is driven in. Will not flag, mushroom or halo. Suitable for use in non coastal areas with all pressure treated lumbers including ACQ. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Camo Deck Screw, NO 8 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Tytan PBT96170TONBC/CTU Big and Round Baler Twine Camo 0349354 Composite/Capstock Deck Screw Camo 0349454 Composite/Capstock Deck Screw
Tytan Baler Twine, Big and Round, 9600 ft Length, Polypropylene, Orange, 170 Knot Strength Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Cedar Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Gray
Camo 0349254 Composite/Capstock Deck Screw Camo 0349154 Composite/Capstock Deck Screw Swaneze S07162FJW Deck Screw
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Brown Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
Protec-Kote SDK-C2W-700 Deck Screw Camo 0350104S Deck Screw Camo 0349274 Composite/Capstock Deck Screw
Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip. Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Camo Deck Screw, Composite/Capstock, NO 10 Screw, 3 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Brown
Camo 0349174 Composite/Capstock Deck Screw SCREW RT CMPST TRIM 8X2-1/2IN Camo 0353104S Deck Screw
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 3 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White
SCREW RT CMPST TRIM 9X2-1/2IN SCREW RT CMPST TRIM WHT 8X2IN SCREW RT CMPST TRIM WHT 8X2-1/
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
Tytan SBT9GRTY Baler Twine SCREW RT CMPST TRIM 8X3-1/8IN Camo 0350134S Deck Screw
Premium Brazilian Green Sisal Baler Twine. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Tytan SBT16GRTY Baler Twine Koch 077210 Extruded Cable Sleeve Camo 0345228S Deck Screw
Premium Brazilian Green Sisal Baler Twine. Extruded constrution. Used for creating eye terminations on cable or wire rope. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Camo 0353154S Deck Screw Camo 0350154S Deck Screw SCREW FIN/TRIM 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $103.34
Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
SCREW FIN/TRIM 8X2IN          SCREW FIN/TRIM 9X2-1/2IN      SCREW RT CMPST TRIM 8X2-1/2IN
SCREW FIN/TRIM 8X2IN
Our Price: $103.34
SCREW FIN/TRIM 9X2-1/2IN
Our Price: $109.02
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RT CMPST TRIM 8X2IN     WIRE HI-TENSION SMOOTH 12.5G  Camo 0345224S Deck Screw
SCREW RT CMPST TRIM 8X2IN
Our Price: $112.14
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Deacero 5692 Baling Wire Keystone 73389 Utility Wire Camo 0345244S Deck Screw
Automatic; made from 14-1/2 gauge wire. Coiled, with the starter end of wire in the coil ready to grasp. Use for brace wire, clothesline and other applications. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Keystone 73432/5524 Utility Wire Keystone 73464/5581 Utility Wire Keystone 73473/5584 Utility Wire
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Jackson Wire 73368 Utility Wire
Use for brace wire, clothesline and other applications.
   
 
1