Home > FASTENERS > CHAIN, CABLE, ROPE > WIRE / CABLE > CLOTHESLINE - WIRE
Choose a sub category:
WIRE - BULK WIRE - PACKAGED CABLE-AIRCRAFT
CLOTHESLINE - WIRE CABLE CLAMPS/FERRULES SWAGING TOOLS
CABLE THIMBLES CABLE BLOCKS
Sort By:
1
SHUT COLD ZINC PLATED 3/16IN  Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
National Hardware 3153BC Cold Shut National Hardware 3153BC Cold Shut National Hardware 3232BC Rope Thimble
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.09
National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments National Hardware Rope Thimble, Series: 3232BC, 1/8 in Size, Cold Rolled Steel, Zinc Plated, Gray
National Hardware 3232BC Rope Thimble Campbell T7670629 Wire Rope Thimble National Hardware 3232BC Rope Thimble
National Hardware Rope Thimble, Series: 3232BC, 3/16 in Size, Cold Rolled Steel, Zinc Plated, Gray Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Rope Thimble, Series: 3232BC, 1/4 in Size, Cold Rolled Steel, Zinc Plated, Gray
CLAMP CABLE SS 1/8IN          Campbell T4900524 Cold Shut National Hardware 3232BC Rope Thimble
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware Rope Thimble, Series: 3232BC, 5/16 in Size, Cold Rolled Steel, Zinc Plated, Gray
Campbell T4900624 Cold Shut SHUT COLD ZINC PLATED 3/8IN   THIMBLE WIRE CBL ZN PLT 3/8IN
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.56
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end.
CLAMP CABLE SS 3/16IN         National Hardware 3232BC Rope Thimble National Hardware 3153BC Cold Shut
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. National Hardware Rope Thimble, Series: 3232BC, 1/2 in Size, Cold Rolled Steel, Zinc Plated, Gray National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments
Campbell T4900824 Cold Shut National Hardware 3153BC Cold Shut National Hardware 3232BC Rope Thimble
COLD SHUTS 1/2IN ZN PLT
Our Price: $2.82
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware Cold Shut, Series: 3153BC, 1/2 in, 0.47 in Rod Diameter, 0.52 in Hole Diameter, Steel, Zinc Plated, 4500 lb Load Capacity, 2.64 in Width, For Use to Couple Chain Attachments National Hardware Rope Thimble, Series: 3232BC, 5/8 in Size, Cold Rolled Steel, Zinc Plated, Gray
CLAMP CABLE SS 1/4IN          THIMBLE WIRE CBL ZN PLT 3/4IN Midwest 11270 Stranded Guy Wire
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Wire used to add stability.
Midwest 11272 Stranded Guy Wire Midwest 11268 Solid Braided Clothesline Camo 0341070 Deck Screw
Wire used to add stability. 15 gauge. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Camo 0356070 Deck Screw National Hardware 2575BC Clothesline National Hardware 3213BC Single Pulley
PULLEYS 1-1/2IN ZN PLT
Our Price: $7.51
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan National Hardware Clothesline, Series: 2575BC, 0.14 in Diameter, 50 ft Length, 150 lb, Boxed Packing, Steel, Green, Plastic Coated, Resists: Rust and Mildew National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications
Camo 0346100 Deck Screw Pro-Fit 0282178 Deck Screw Pro-Fit 0282198 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important.
Pro-Fit 0282208 Deck Screw Pro-Fit 0282108 Deck Screw Pro-Fit 0282078 Deck Screw
Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important.
Pro-Fit 0282138 Deck Screw Pro-Fit 0282158 Deck Screw SCREW FIN/TRIM 8X1-1/2IN
Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
Camo 0356100 Deck Screw Camo 0341100 Deck Screw Protec-Kote SDK-C2W-100 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip.
Camo 0341190 Deck Screw Camo 0356130 Deck Screw Camo 0341130 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, Star Drive, Type 17 Point, Tan Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Camo 0356190 Deck Screw National Hardware 3211BC Single Pulley Camo 0346130 Deck Screw
PULLEYS 1-1/2IN ZN PLT
Our Price: $8.44
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Midwest 11269 Solid Braided Clothesline National Hardware 3221BC Single Pulley Campbell T7670659 Wire Rope Thimble
PULLEYS 2IN ZN PLT
Our Price: $9.17
15 gauge. National Hardware Single Pulley, Series: 3221BC, 3/8 in Maximum Cable, 100 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, 0.39 in Diameter Groove, 2.61 in Overall Height, 2.63 in Overall Width, Joist Mounting, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18, For Rope or Cord for Indoor and Outdoor Applications Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware 3213BC Single Pulley Campbell T7670609 Wire Rope Thimble Camo 0346150 Deck Screw
PULLEYS 2IN ZN PLT
Our Price: $9.63
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
SCREW FIN/TRIM 8X2IN          SCREW TRIM 8X2IN              National Hardware 3219BC Single Pulley
SCREW FIN/TRIM 8X2IN
Our Price: $9.86
SCREW TRIM 8X2IN
Our Price: $9.86
PULLEYS 1-1/2IN ZN PLT
Our Price: $9.99
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1-1/2 in Sheave Width, 0.39 in Diameter Groove, 2.77 in Overall Height, 2.23 in Overall Width, Wall, Ceiling Mounting, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications
Midwest 11823 Multi-Stranded Low Tensile Utility Wire Clothesline National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.72
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.72
Multiple strands of wire assure greater flexibility with no loss of strength. Low-tensile, soft and easy to twist/tie. 12 strand. 50'. National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
Camo 0346170 Deck Screw National Hardware 3211BC Single Pulley PULLEY ZINC PLATED 2IN
PULLEYS 2IN ZN PLT
Our Price: $10.85
PULLEYS 2IN ZN PLT
Our Price: $10.92
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.95 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2 in Sheave Width, 3-1/4 in Side Plate Length, 1 Grooves, 0.39 in Groove, 2-1/2 in Overall Width, Wall/Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Zinc Plated, For Use With Rope or Cord in Indoor and Outdoor Applications
Camo 0356150 Deck Screw Camo 0341150 Deck Screw Deuer DB15G Fixed Eye Gable Block
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Campbell T7670619 Wire Rope Thimble SCREW DCK STR DRV TAN NO10X4IN National Hardware 3213BC Single Pulley
PULLEYS 2-1/2IN ZN PLT
Our Price: $11.67
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.64 in Outer Diameter, 2-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications
SCREW RT CMPST TRIM WHT 8X2IN SCREW FIN/TRIM 8X2-1/2IN      SCREW RT COMPOSITE 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $11.72
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
Type XT-II GTXT112PP Deck Screw Type XT-II GTXT200PP Deck Screw Type XT-II GTXT212PP Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power.
Type XT-II GTXT300PP Deck Screw Type XT-II GTXT114PP Deck Screw Camo 0341200 Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Camo Deck Screw, Multi-Purpose, NO 10 Screw, 4 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Camo 0341170 Deck Screw Pro-Fit 0281078 Deck Screw Pro-Fit 0281208 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0281108 Deck Screw Pro-Fit 0281138 Deck Screw Pro-Fit 0281178 Deck Screw
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0281198 Deck Screw Pro-Fit 0281158 Deck Screw National Hardware 3213BC Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $12.57
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. National Hardware Single Pulley, Series: 3213BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Fixed Eye Connection, 0.68 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications
Camo 0346190 Deck Screw National Hardware 3211BC Single Pulley Deuer DB15E Swivel Eye Cable Block
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.63
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.63 in Outer Diameter, 2-1/2 in Sheave Width, Swivel Eye Connection, 3.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, 4.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Camo 0356170 Deck Screw Type XT-II GTXT400PP Deck Screw XT II GTXT312PP Wood Screw
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power.
PULLEY ZINC PLATED 2-1/2IN    SCREW FIN/TRIM WHT 8X2-1/2IN  SCREW FIN/TRIM 8X3-1/8IN
PULLEYS 2-1/2IN ZN PLT
Our Price: $13.46
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $13.82
National Hardware Scissor Hook Single Pulley, Series: 3217BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2-1/2 in Sheave Width, 3.11 in Side Plate Length, 0.76 in Eye Diameter, 1 Grooves, 0.39 in Groove, 6.35 in Overall Height, 2.63 in Overall Width, Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Nickel Plated, For Use With Rope or Cord in Indoor and Outdoor Applications Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
National Hardware 3211BC Single Pulley Deuer DB20G Fixed Eye Gable Block SCREW RT CMPST TRIM WHT 8X2-1/
PULLEYS 3IN ZN PLT
Our Price: $13.84
National Hardware Single Pulley, Series: 3211BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.4 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, 5.19 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
Camo 0345120 Deck Screw National Hardware 3223BC Latching Swivel Hook Single Pulley Campbell T7670639 Wire Rope Thimble
PULLEYS 2IN ZN PLT
Our Price: $14.06
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. National Hardware Single Pulley, Latching Swivel Hook, Series: 3223BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 6.49 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18 Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
SCREW RT CMPST TRIM WHT 8X2-3/ Deuer DB20HS Swivel Eye Scissor Hook Block Camo 0345140 Deck Screw
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Deuer DB20E Swivel Eye Cable Block Campbell T7670649 Wire Rope Thimble Campbell T7670669 Wire Rope Thimble
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Midwest 11267 Stranded Assorted Clothesline National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $17.10
PULLEYS 3IN ZN PLT
Our Price: $17.10
9 gauge. National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
Deuer DB25HS Swivel Eye Scissor Hook Block Deuer DB25G Fixed Eye Gable Block Jackson Wire 16016344 Flexible Tie Wire
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black.
Keystone 73428/5570 Utility Wire Camo 0341074 Deck Screw Camo 0356074 Deck Screw
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-1/4 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
Deuer DB25E Swivel Eye Cable Block SCREW RT CMPST TRIM 9X3-1/8IN Keystone 73461/5610 Utility Wire
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Keystone 73468/5582 Utility Wire Camo 0348100S Deck Screw SCREW RT CMPST TRIM WHT 8X3-1/
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Camo Deck Screw, NO 10 Screw, 1-5/8 in Length, Bugle Head, T25 Drive, Star Drive, 316 Stainless Steel Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
Baron 66005/50066 Pre-Cut Flexible Aircraft Cable Camo 0346104 Deck Screw Camo 0356104 Deck Screw
Aircraft cable. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
Camo 0341104 Deck Screw Evans Cordage 110A2 Cutting Gun Blade SCREW FIN/TRIM 9X4IN
SCREW FIN/TRIM 9X4IN
Our Price: $19.43
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green Fits Orgill #  686.3112, Rope Gun. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
Keystone 73483/5585 Utility Wire SCREW FIN/TRIM HEAD 8X2IN     SCREW FIN/TRIM 9X5IN
SCREW FIN/TRIM HEAD 8X2IN
Our Price: $20.31
SCREW FIN/TRIM 9X5IN
Our Price: $20.65
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
Jackson Wire 16026344 Flexible Tie Wire Baron 86005/50068 Pre-Cut Flexible Aircraft Cable Camo 0348130S Deck Screw
Flexible, hand coil packed. Ideal for tying rods or pipe products. 10 Pound coil. 170 feet in length. Black. Aircraft cable. Camo Deck Screw, NO 10 Screw, 2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Baron 76005/50067 Pre-Cut Flexible Aircraft Cable Camo 0346134 Deck Screw Camo 0341134 Deck Screw
Aircraft cable. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Camo 0356134 Deck Screw Deuer DB30E Swivel Eye Cable Block Deuer DB30G Fixed Eye Gable Block
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, Star Drive, Type 17 Point, Tan Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
SCREW RT CMPST TRIM 8X2-1/2IN Simpson Strong-tie T08200DWP Deck Screw Deuer DB30HS Swivel Eye Scissor Hook Block
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Highly recommended for seaside applications and maximum corrosion resistance. Unique 4-corner thread-form with raised ridge technology greatly reduces driving torque. 6 lobe drive virtually eliminates driver bit cam-out. Self-countersinking nibs under head insure flush installation. Penetrate hardest wood products with ease; often without pre-drilling. Threaded approximately 2/3 up shank to tightly draw deck board to joist. Made of solid 316 stainless steel for maximum corrosion resistance. Contractor's  Packs will fasten 500 square feet of decking (6" boards on 16" centers). Deck  Packs  will fasten 100 square feet of decking (6" boards on 16" centers). NOTE:  DO NOT OVER-DRIVE. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Camo 0346154 Deck Screw National Hardware V3225 Single Pulley Block and Tackle Set Camo 0356154 Deck Screw
PULLEYS 2IN ZN PLT
Our Price: $25.44
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green National Hardware Single Pulley Block and Tackle Set, Series: V3225, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 6.23 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
Camo 0341154 Deck Screw Baron 50201/50210 Pre-Cut Flexible Aircraft Cable Baron 0 7005/50070 Pre-Cut Extra Flexible Aircraft Cable
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Aircraft cable. SWL indicated the safe working load. Aircraft cable.
Baron 50255/50225 Pre-Cut Flexible Aircraft Cable Baron 0 0205/50200 Pre-Cut Aircraft Cable Camo 0346174 Deck Screw
Aircraft cable. SWL indicated the safe working load. Aircraft cable. SWL indicated the safe working load. Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Deuer DB35G Fixed Eye Gable Block Camo 0348150S Deck Screw SCREW M/P FRAMING 10X2-1/2IN
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Camo Deck Screw, NO 10 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
Pro-Fit 0282074 Deck Screw Pro-Fit 0282104 Deck Screw Pro-Fit 0282134 Deck Screw
Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important.
Pro-Fit 0282154 Deck Screw Pro-Fit 0282174 Deck Screw Pro-Fit 0282194 Deck Screw
Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important. Use for exterior projects where rust resistance is not as important.
Baron 50215/50215 Pre-Cut Flexible Aircraft Cable Baron 96005/50069 Pre-Cut Extra Flexible Aircraft Cable Deuer DB35E Swivel Eye Cable Block
Aircraft cable. SWL indicated the safe working load. Aircraft cable. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Camo 0345128 Deck Screw Baron 0 3205/50230 Pre-Cut Aircraft Cable Deuer DB35HS Swivel Eye Scissor Hook Block
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. Aircraft cable. SWL indicated the safe working load. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Baron 54205/50245 Pre-Cut Extra Flexible Aircraft Cable Camo 0341174 Deck Screw Camo 0356174 Deck Screw
Aircraft cable. SWL indicated the safe working load. Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
Camo 0348170S Deck Screw Pro-Fit 0281194 Deck Screw Pro-Fit 0281074 Deck Screw
Camo Deck Screw, NO 10 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0281104 Deck Screw Pro-Fit 0281134 Deck Screw Pro-Fit 0281154 Deck Screw
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0281174 Deck Screw Pro-Fit 0281204 Deck Screw Camo 0345148 Deck Screw
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Camo 0346194 Deck Screw Camo 0356194 Deck Screw Camo 0341194 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
CABLE GALV PRECUT 7X19 1/4 50 Type XT-II GTXT200FP Deck Screw Type XT-II GTXT212FP Deck Screw
Aircraft cable. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power.
Type XT-II GTXT300FP Deck Screw SCREW MULT-PRPS FRM 10X3-1/8IN Baron 57005/50075 Pre-Cut Extra Flexible Aircraft Cable
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials. Aircraft cable.
Camo 0349354 Composite/Capstock Deck Screw Camo 0349454 Composite/Capstock Deck Screw Camo 0349254 Composite/Capstock Deck Screw
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Cedar Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Gray Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Brown
Camo 0349154 Composite/Capstock Deck Screw Type XT-II GTXT312FP Deck Screw XT II GTXT400FP Wood Screw
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 2-1/2 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. NanoGard fluoropolymer coated fasteners are designed for pressure treated lumber applications and for all outdoor wood construction for decking, patios, lawn furniture, window boxes, etc.
Evans Cordage 100T1 Corded Solder/Rope Cut Gun Hillman 50145 Clothesline SCREW DCK STR DRV TAN NO10X4IN
Quick heating up to 100 watts of power in 4 seconds. Specifications: 100 watts, heat range 1, Weight: 1.25 Lbs. 1 tip included. Clothesline wire is durable and long lasting.
Baron 53205/50235 Pre-Cut Flexible Aircraft Cable Camo 0341204 Deck Screw Protec-Kote SDK-C2W-700 Deck Screw
Aircraft cable. SWL indicated the safe working load. Camo Deck Screw, Multi-Purpose, NO 10 Screw, 4 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Flat bottom head, KTX square driver, Protec-Kote for strong protection against the elements, case-hardened steel, self-tapping tip.
Camo 0349174 Composite/Capstock Deck Screw Baron 83105/50130 Pre-Cut Extra Flexible Aircraft Cable Hillman 50149 Clothesline
Camo Deck Screw, Composite/Capstock, NO 10 Screw, 3 in Length, T20 Drive, Star Drive, Type 99 Double Slash Point, Protech, Tan Aircraft cable. Clothesline wire is durable and long lasting.
Camo 0345124 Deck Screw Hillman 50146 Clothesline Camo 0348104S Deck Screw
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. Clothesline wire is durable and long lasting. Camo Deck Screw, NO 10 Screw, 1-5/8 in Length, Bugle Head, T25 Drive, Star Drive, 316 Stainless Steel
SCREW FIN/TRIM 8X2IN          SCREW FIN/TRIM 8X2-1/2IN      SCREW FIN/TRIM 8X3-1/8IN
SCREW FIN/TRIM 8X2IN
Our Price: $56.58
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $56.58
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $56.58
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW FIN/TRIM WHT 8X2-1/2IN  SCREW RT CMPST TRIM 8X2-1/2IN SCREW RT CMPST TRIM 9X2-1/2IN
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RT CMPST TRIM WHT 8X2IN SCREW RT CMPST TRIM WHT 8X2-1/ SCREW FIN/TRIM WHT 8X2IN
SCREW FIN/TRIM WHT 8X2IN
Our Price: $56.58
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW RT CMPST TRIM 8X3-1/8IN Camo 0345144 Deck Screw Baron 59005/50095 Pre-Cut Extra Flexible Aircraft Cable
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. Aircraft cable.
Simpson Strong-tie T10250WPP Deck Screw Campbell 7000227 Flexible Aircraft Cable Simpson Strong-tie S10300DB5 Deck Screw