Home > FASTENERS > CHAIN, CABLE, ROPE > WIRE / CABLE
Choose a sub category:
WIRE - BULK WIRE - PACKAGED CABLE-AIRCRAFT
CLOTHESLINE - WIRE CABLE CLAMPS/FERRULES SWAGING TOOLS
CABLE THIMBLES CABLE BLOCKS
Sort By:
1
Cambell T7670409 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp National Hardware MP3230B Wire Cable Clamp
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230B, 1/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Wire Cable Clamp, Series: MP3230B, 1/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 3 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
National Hardware MP3230B Wire Cable Clamp Cambell T7670429 Wire Rope Clip National Hardware MP3230B Wire Cable Clamp
National Hardware Wire Cable Clamp, Series: MP3230B, 3/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230B, 1/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 1 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Cambell T7670439 Wire Rope Clip Campbell T7670629 Wire Rope Thimble National Hardware MP3230BC Wire Cable Clamp
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire Cable Clamp, Series: MP3230BC, 5/16 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 4 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an eye or Loop on Wire Rope
National Hardware 3232BC Rope Thimble National Hardware 3232BC Rope Thimble National Hardware 3232BC Rope Thimble
National Hardware Rope Thimble, Series: 3232BC, 1/8 in Size, Cold Rolled Steel, Zinc Plated, Gray National Hardware Rope Thimble, Series: 3232BC, 3/16 in Size, Cold Rolled Steel, Zinc Plated, Gray National Hardware Rope Thimble, Series: 3232BC, 1/4 in Size, Cold Rolled Steel, Zinc Plated, Gray
CLAMP CABLE SS 1/8IN          National Hardware 3232BC Rope Thimble Cambell T7670449 Wire Rope Clip
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. National Hardware Rope Thimble, Series: 3232BC, 5/16 in Size, Cold Rolled Steel, Zinc Plated, Gray Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Cambell T7670459 Wire Rope Clip THIMBLE WIRE CBL ZN PLT 3/8IN CLAMP CABLE SS 3/16IN
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end.
National Hardware MP3230B Wire Cable Clamp FERRULE /TOOL ALUM 1/16IN     FERRULE /TOOL ALUM 3/32IN
National Hardware Wire Cable Clamp, Series: MP3230B, 3/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 3 in Width, 5 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE /TOOL ALUM 1/8IN      CABLE FERRULES-STOP 1/16      CABLE CLAMP WIRE SS 1/16
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. For use with wire cable.
FERRULE/TOOL ALUMINUM 1/16IN  FERRULE/TOOL ALUMINUM 1/8IN   FERRULE/TOOL ALUMINUM 3/32IN
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
FERRULE/TOOL ALUMINUM 5/32IN  Campbell B767-5314 Cable Ferrule/Stop National Hardware 3232BC Rope Thimble
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. National Hardware Rope Thimble, Series: 3232BC, 1/2 in Size, Cold Rolled Steel, Zinc Plated, Gray
FERRULE/TOOL ALUMINUM 3/16IN  FERRULE /TOOL ALUM 5/32IN     Campbell B7675324 Cable Ferrule/Stop
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable.
National Hardware MP3230B Wire Cable Clamp FERRULE /TOOL ALUM 3/16IN     Cambell T7670479 Wire Rope Clip
National Hardware Wire Cable Clamp, Series: MP3230B, 1/2 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 2 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Hillman 50130 Utility Wire CLAMP CABLE SS 1/8IN          Cambell T7670489 Wire Rope Clip
CABLE CLAMPS 1/8IN SS
Our Price: $2.71
Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Campbell B7675344/B7675444 Cable Ferrules and Stops Set CLAMP CABLE SS 3/16IN         Weather Challenger 77950 Deck Screw
CABLE CLAMPS 3/16IN SS
Our Price: $2.92
(2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness All weather galvanized finish.
Weather Challenger 77952 Deck Screw Weather Challenger 77954 Deck Screw Weather Challenger 77951 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
Baron C-260-1/8 Wire Rope Clip Hillman 50129 Utility Wire Weather Challenger 77955 Deck Screw
Baron Wire Rope Clip, 1/8 in Opening, Malleable Iron, Galvanized Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. All weather galvanized finish.
Weather Challenger 77953 Deck Screw National Hardware MP3230B Wire Cable Clamp National Hardware 3232BC Rope Thimble
All weather galvanized finish. National Hardware Wire Cable Clamp, Series: MP3230B, 5/8 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 4 in Width, 6 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope National Hardware Rope Thimble, Series: 3232BC, 5/8 in Size, Cold Rolled Steel, Zinc Plated, Gray
Cambell T7670499 Wire Rope Clip CABLE CLAMP WIRE SS 1/8       Baron C-260-3/16 Wire Rope Clip
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. For use with wire cable. Baron Wire Rope Clip, 3/16 in Opening, Malleable Iron, Galvanized
National Hardware V2568 Wire CABLE CLAMP WIRE SS 3/16      Hillman 50154 Utility Wire
WIRE 19 GAX50FT GALV
Our Price: $3.23
National Hardware Wire, Series: V2568, 19 ga Wire, 50 ft Length, Steel, Galvanized, BHMA A138.18, 40 lb Load, For Crafts, Art Projects and Various Home Projects For use with wire cable. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Ideal for hobbies, fixing up fences and hanging heavy equipment.
Baron C-260-1/4 Wire Rope Clip National Hardware V2568 Wire National Hardware V2568 Wire
WIRE 28 GAX100FT GALV
Our Price: $3.44
Baron Wire Rope Clip, 1/4 in Opening, Malleable Iron, Galvanized National Hardware Wire, Series: V2568, 28 ga Wire, 100 ft Length, Steel, Galvanized, BHMA A138.18, 4 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire, Series: V2568, 28 ga Wire, 100 ft Length, Steel, Dark Annealed, 4 lb Load, For Crafts, Art Projects and Various Home Projects
FERRULE /TOOL ALUM 1/4IN      Hillman 50132 Utility Wire CLAMP CABLE SS 1/4IN
CABLE CLAMPS 1/4IN SS
Our Price: $3.62
Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness
CLAMP CABLE SS 1/4IN          Hillman 50138 Utility Wire FERRULE/TOOL ALUMINUM 1/4IN
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. Designed to make strong wire rope loops. Not designed for load bearing applications. Follow swaging instructions that are included in package.
National Hardware V2568 Wire National Hardware V2568 Wire Hillman 50158 Utility Wire
WIRE 22 GAX100FT GALV
Our Price: $3.68
National Hardware Wire, Series: V2568, 19 ga Wire, 50 ft Length, Steel, Dark Annealed, 40 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire, Series: V2568, 22 ga Wire, 100 ft Length, Steel, Galvanized, BHMA A138.18, 15 lb Load, For Crafts, Art Projects and Various Home Projects This soft wire is coated with rust inhibitor.
Hillman 50155 Utility Wire Hillman 50139 Utility Wire CABLE CLAMP WIRE SS 1/4
This soft wire is coated with rust inhibitor. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. For use with wire cable.
Hillman 50157 Utility Wire Hillman 50176 Utility Wire Hillman 50136 Utility Wire
This soft wire is coated with rust inhibitor. Hobby wire for home, school and workplace. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment.
Hillman 57223 Floral Wire Hillman 50135 Utility Wire National Hardware MP3230BC Wire Cable Clamp
Plastic coated floral wire, 24 gauge. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. National Hardware Wire Cable Clamp, Series: MP3230BC, 3/4 in Opening, Steel U-Bolt/Nuts, Malleable Iron Saddle, Zinc Plated, 3 in Height, 2 in Width, 1 in Length, Federal FF-C-450D, Type 1, Class 2, For Forming an Eye or Loop on Wire Rope
Hillman 50153 Utility Wire National Hardware V2566 Wire National Hardware V2571 Wire
WIRE 18 GAX50FT AL
Our Price: $4.68
WIRE 24 GAX100FT GREEN
Our Price: $4.68
Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Ideal for hobbies, fixing up fences and hanging heavy equipment. National Hardware Wire, Series: V2566, 18 ga Wire, 50 ft Length, Aluminum, Aluminum, 30 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire, Series: V2571, 24 ga Wire, 100 ft Length, Steel, Green, 10 lb Load, For Crafts, Art Projects and Various Home Projects
THIMBLE WIRE CBL ZN PLT 3/4IN CABLE CLAMP WIRE SS 5/16      Midwest 11270 Stranded Guy Wire
Designed for forming an eye or loop on wire rope. Keeps wire rope from excessive wear on loop end. For use with wire cable. Wire used to add stability.
National Hardware V2569 Wire National Hardware V2570 Wire Midwest 11272 Stranded Guy Wire
WIRE 28 GAX75FT SLD BRS
Our Price: $4.88
WIRE 18 GAX25FT COPPER
Our Price: $4.98
National Hardware Wire, Series: V2569, 28 ga Wire, 75 ft Length, Solid Brass, Solid Brass, 4 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire, Series: V2570, 18 ga Wire, 25 ft Length, Copper, Copper Plated, 30 lb Load, For Crafts, Art Projects and Various Home Projects Wire used to add stability.
Wellington 15742 Twisted Wire Clothesline Campbell B7675354/B7675454 Cable Ferrules and Stops Set Hillman 50163 Utility Wire
Very strong, low-stretch line constructed of twisted wire cable and protected with a tough abrasion- and weather-resistant forest-green vinyl jacket. Very flexible, easy to handle. Does not absorb dirt, wipes clean with a damp cloth. 5/32" Nominal Diameter. 50'L. Bagged. Green. (2) Cable Ferrules and (2) Cable Stops. Made from aluminum.Do not use on coated cable. Wire that is great for home, hobbies, school and workplace.
Hillman 50177 Utility Wire Midwest 11268 Solid Braided Clothesline Hillman 50134 Utility Wire
Self tying wire wraps in soft plastic coating around itself and stays. Finger Friendly strands. Hands stay clean and cut-free. Kink resistant. 15 gauge. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment.
Hillman 50131 Utility Wire Hillman 50161 Utility Wire Hillman 50137 Utility Wire
Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. Wire that is great for home, hobbies, school and workplace. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment.
National Hardware V2568 Wire Hillman 50164 Utility Wire National Hardware V2568 Wire
WIRE 18 GAX110FT GALV
Our Price: $6.06
WIRE 20 GAX175FT GALV
Our Price: $6.12
National Hardware Wire, Series: V2568, 18 ga Wire, 110 ft Length, Steel, Galvanized, BHMA A138.18, 50 lb Load, For Crafts, Art Projects and Various Home Projects Wire that is great for home, hobbies, school and workplace. National Hardware Wire, Series: V2568, 20 ga Wire, 175 ft Length, Steel, Galvanized, BHMA A138.18, 30 lb Load, For Crafts, Art Projects and Various Home Projects
Weather Challenger 77965 Deck Screw Weather Challenger 77961 Deck Screw Weather Challenger 77963 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
Weather Challenger 77966 Deck Screw Weather Challenger 77968 Deck Screw Weather Challenger 77969 Deck Screw
All weather galvanized finish. All weather galvanized finish. All weather galvanized finish.
National Hardware V2567 Wire Weather Challenger 77958 Deck Screw Weather Challenger 77960 Deck Screw
WIRE 19 GAX30FT SS
Our Price: $6.26
National Hardware Wire, Series: V2567, 19 ga Wire, 30 ft Length, Stainless Steel, Stainless Steel, BHMA A138.18, 45 lb Load, For Crafts, Art Projects and Various Home Projects All weather galvanized finish. All weather galvanized finish.
National Hardware V2570 Wire CABLE CLAMP WIRE SS 3/8       Pro-Fit 0288128 Drywall Screw
WIRE 24 GAX100FT COPPER
Our Price: $6.34
National Hardware Wire, Series: V2570, 24 ga Wire, 100 ft Length, Copper, Copper Plated, 9 lb Load, For Crafts, Art Projects and Various Home Projects For use with wire cable. Use for drywall to 20 gauge to 14 gauge steel studs.
Hillman 50151 Utility Wire National Hardware 2575BC Clothesline Pro-Fit 0280198 Drywall Screw
Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Ideal for hobbies, fixing up fences and hanging heavy equipment. National Hardware Clothesline, Series: 2575BC, 0.14 in Diameter, 50 ft Length, 150 lb, Boxed Packing, Steel, Green, Plastic Coated, Resists: Rust and Mildew Use for drywall to light gauge steel studs.
Pro-Fit 0280108 Drywall Screw Pro-Fit 0280078 Drywall Screw Pro-Fit 0280208 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280178 Drywall Screw Pro-Fit 0280138 Drywall Screw Pro-Fit 0280058 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280158 Drywall Screw CLAMP CABLE ZINC PLATED 1IN   Hillman 50180 Utility Wire
CABLE CLAMPS 1IN ZN PLT
Our Price: $6.93
Use for drywall to light gauge steel studs. Designed for forming an eye or loop on wire rope. Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Anchoring point for webbing or strap. Steel U-bolt and nuts. Malleable iron saddle. Always follow requirements for number of clamps per loop according to wire rope thickness Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment.
Hillman 50160 Utility Wire National Hardware V4230 Weather Resistant Wire Cable Clamp Hillman 50150 Utility Wire
CABLE CLAMPS 5/16IN SS
Our Price: $7.11
Wire that is great for home, hobbies, school and workplace. National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 5/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Ideal for hobbies, fixing up fences and hanging heavy equipment.
CABLE CLAMP WIRE SS 1/2       Cambell T7670419 Wire Rope Clip National Hardware 2568BC Wire
WIRE 14 GAX100FT GALV
Our Price: $7.32
For use with wire cable. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Wire, Series: 2568BC, 14 ga Wire, 100 ft Length, Steel, Galvanized, BHMA A138.18, 150 lb Load, For Crafts, Art Projects and Various Home Projects
National Hardware 3213BC Single Pulley Hillman 50162 Utility Wire Campbell T7670659 Wire Rope Thimble
PULLEYS 1-1/2IN ZN PLT
Our Price: $7.51
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Wire that is great for home, hobbies, school and workplace. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware V2568 Wire Hillman 50141 Utility Wire Campbell T7670609 Wire Rope Thimble
WIRE 24 GAX250FT GALV
Our Price: $8.14
National Hardware Wire, Series: V2568, 24 ga Wire, 250 ft Length, Steel, Galvanized, BHMA A138.18, 10 lb Load, For Crafts, Art Projects and Various Home Projects Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
National Hardware 3211BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 2574BC Wire
PULLEYS 1-1/2IN ZN PLT
Our Price: $8.44
CABLE CLAMPS 3/16IN SS
Our Price: $8.61
National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Wire, Series: 2574BC, 50 ft Length, Steel, Blue Plastic Coated, 100 lb Load
Midwest 11269 Solid Braided Clothesline National Hardware 3221BC Single Pulley Koch 100942/48979 Mini Load Binder
PULLEYS 2IN ZN PLT
Our Price: $9.17
15 gauge. National Hardware Single Pulley, Series: 3221BC, 3/8 in Maximum Cable, 100 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, 0.39 in Diameter Groove, 2.61 in Overall Height, 2.63 in Overall Width, Joist Mounting, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18, For Rope or Cord for Indoor and Outdoor Applications Stamped steel construction. Zinc finish.
National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 3213BC Single Pulley Weather Challenger 94005 Deck Screw
CABLE CLAMPS 3/8IN SS
Our Price: $9.46
PULLEYS 2IN ZN PLT
Our Price: $9.63
National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 3/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications All weather galvanized finish.
National Hardware 3219BC Single Pulley National Hardware V4230 Weather Resistant Wire Cable Clamp Campbell T7670619 Wire Rope Thimble
PULLEYS 1-1/2IN ZN PLT
Our Price: $9.99
CABLE CLAMPS 1/4IN SS
Our Price: $10.02
National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1-1/2 in Sheave Width, 0.39 in Diameter Groove, 2.77 in Overall Height, 2.23 in Overall Width, Wall, Ceiling Mounting, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/4 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Do Not use on coated cable; if used on coated cable, remove coating from assembly area.
Midwest 11823 Multi-Stranded Low Tensile Utility Wire Clothesline National Hardware 2573BC Guy Wire Cambell 7670704/52333 Cable Ferrule
WIRE 20 GAX100FT GALV
Our Price: $10.23
Multiple strands of wire assure greater flexibility with no loss of strength. Low-tensile, soft and easy to twist/tie. 12 strand. 50'. National Hardware Guy Wire, Series: 2573BC, 20 ga Wire, 100 ft Length, Steel, Galvanized, BHMA A138.18, 200 lb Load Extruded constrution. Used for creating eye terminations on cable or wire rope.
National Hardware 2568BC Wire National Hardware V4230 Weather Resistant Wire Cable Clamp National Hardware 3215BC Swivel Hook Single Pulley
WIRE 16 GAX200FT GALV
Our Price: $10.40
CABLE CLAMPS 1/2IN SS
Our Price: $10.63
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.72
National Hardware Wire, Series: 2568BC, 16 ga Wire, 200 ft Length, Steel, Galvanized, BHMA A138.18, 100 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/2 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated
National Hardware 3217BC Scissor Hook Single Pulley National Hardware 2568BC Wire National Hardware V4230 Weather Resistant Wire Cable Clamp
PULLEYS 1-1/2IN ZN PLT
Our Price: $10.72
WIRE 12 GAX100FT GALV
Our Price: $10.74
CABLE CLAMPS 1/16IN SS
Our Price: $10.84
National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 3/8 in Maximum Cable, 420 lb Load Capacity, 1.63 in Outer Diameter, 1-1/2 in Sheave Width, Swivel Eye Connection, 2.11 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 4.98 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Wire, Series: 2568BC, 12 ga Wire, 100 ft Length, Steel, Galvanized, BHMA A138.18, 300 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/16 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope
National Hardware 3211BC Single Pulley PULLEY ZINC PLATED 2IN        Deuer DB15G Fixed Eye Gable Block
PULLEYS 2IN ZN PLT
Our Price: $10.85
PULLEYS 2IN ZN PLT
Our Price: $10.92
National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 3.95 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray National Hardware Single Pulley, Series: 3219BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2 in Sheave Width, 3-1/4 in Side Plate Length, 1 Grooves, 0.39 in Groove, 2-1/2 in Overall Width, Wall/Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Zinc Plated, For Use With Rope or Cord in Indoor and Outdoor Applications Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
National Hardware 2568BC Wire National Hardware V4230 Weather Resistant Wire Cable Clamp Cambell 7670714/ACSL-3250 Cable Ferrule
CABLE CLAMPS 1/8IN SS
Our Price: $11.54
National Hardware Wire, Series: 2568BC, 16 ga Wire, 200 ft Length, Steel, Dark Annealed, 100 lb Load, For Crafts, Art Projects and Various Home Projects National Hardware Wire Cable Clamp, Weather Resistant, Series: V4230, 1/8 in Opening, Stainless Steel, Zinc Plated, BHMA A138.18, For Forming an eye or Loop on Wire Rope Extruded constrution. Used for creating eye terminations on cable or wire rope.
National Hardware 3213BC Single Pulley S-Line 50025-10 Mini Chain Binder Cambell 7670724/52337 Cable Ferrule
PULLEYS 2-1/2IN ZN PLT
Our Price: $11.67
National Hardware Single Pulley, Series: 3213BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.64 in Outer Diameter, 2-1/2 in Sheave Width, Fixed Eye Connection, 1/2 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications Heat treated steel body with carbon steel hooks.  Intended for use in light duty farm, fencing and industrial binding applications where load factor is minimal.  Hook swivels 360 degrees and tightener is designed to toggle away from load. Extruded constrution. Used for creating eye terminations on cable or wire rope.
Campbell T7670639 Wire Rope Thimble National Hardware 3213BC Single Pulley National Hardware 3211BC Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $12.57
PULLEYS 2-1/2IN ZN PLT
Our Price: $12.63
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Single Pulley, Series: 3213BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Fixed Eye Connection, 0.68 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, Steel, Die Cast Sheave, Zinc Plated, Gray, For Rope or Cord for Indoor and Outdoor Applications National Hardware Single Pulley, Series: 3211BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2.63 in Outer Diameter, 2-1/2 in Sheave Width, Swivel Eye Connection, 3.11 in Side Plate Length, 0.38 in Eye Diameter, 0.39 in Diameter Groove, 4.45 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, For Rope or Cord for Indoor and Outdoor Applications
Deuer DB15E Swivel Eye Cable Block Hillman 50140 Utility Wire PULLEY ZINC PLATED 2-1/2IN
PULLEYS 2-1/2IN ZN PLT
Our Price: $13.46
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Self tying wires that wrap around themselves and stay. Soft and flexible, hands stay clean and cut free. Applications: Ideal for hobbies, fixing up fences and hanging heavy equipment. National Hardware Scissor Hook Single Pulley, Series: 3217BC, 3/8 in Maximum Cable, 550 lb Load Capacity, 2-1/2 in Sheave Width, 3.11 in Side Plate Length, 0.76 in Eye Diameter, 1 Grooves, 0.39 in Groove, 6.35 in Overall Height, 2.63 in Overall Width, Ceiling Mounting, Steel With Zinc Die-Cast Sheave, Nickel Plated, For Use With Rope or Cord in Indoor and Outdoor Applications
Campbell T7670649 Wire Rope Thimble Campbell T7670669 Wire Rope Thimble National Hardware 3211BC Single Pulley
PULLEYS 3IN ZN PLT
Our Price: $13.84
Do Not use on coated cable; if used on coated cable, remove coating from assembly area. Do Not use on coated cable; if used on coated cable, remove coating from assembly area. National Hardware Single Pulley, Series: 3211BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.4 in Eye Diameter, 0.52 in Diameter Groove, Fasteners: Chain/Rope Accessory, 5.19 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, Gray
Deuer DB20G Fixed Eye Gable Block National Hardware 3223BC Latching Swivel Hook Single Pulley Deuer DB20HS Swivel Eye Scissor Hook Block
PULLEYS 2IN ZN PLT
Our Price: $14.06
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. National Hardware Single Pulley, Latching Swivel Hook, Series: 3223BC, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, 6.49 in Overall Height, Steel, Die Cast Sheave, Zinc Plated, BHMA A138.18 Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB20E Swivel Eye Cable Block Weather Challenger 00513 Deck Screw Midwest 11267 Stranded Assorted Clothesline
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. All weather galvanized finish. 9 gauge.
National Hardware 3215BC Swivel Hook Single Pulley National Hardware 3217BC Scissor Hook Single Pulley Deuer DB25HS Swivel Eye Scissor Hook Block
PULLEYS 3IN ZN PLT
Our Price: $17.10
PULLEYS 3IN ZN PLT
Our Price: $17.10
National Hardware Single Pulley, Swivel Hook, Series: 3215BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated National Hardware Single Pulley, Scissor Hook, Series: 3217BC, 1/2 in Maximum Cable, 650 lb Load Capacity, 3.13 in Outer Diameter, 3 in Sheave Width, Swivel Eye Connection, 3.7 in Side Plate Length, 0.76 in Eye Diameter, 0.52 in Diameter Groove, 7.08 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB25G Fixed Eye Gable Block Keystone 73428/5570 Utility Wire Baron 66005/50066 Pre-Cut Flexible Aircraft Cable
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Aircraft cable.
Deuer DB25E Swivel Eye Cable Block Keystone 73461/5610 Utility Wire Keystone 73468/5582 Utility Wire
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes.
Keystone 73483/5585 Utility Wire Baron 86005/50068 Pre-Cut Flexible Aircraft Cable Baron 76005/50067 Pre-Cut Flexible Aircraft Cable
Ideal for brace wire, clothesline and dozens of other uses. Available in annealed or galvanized finishes. Aircraft cable. Aircraft cable.
Baron 260-7/8 Wire Rope Clip S-Line 45943-12 Lever Chain Binder Pro-Fit 0280054 Drywall Screw
Baron Wire Rope Clip, 7/8 in Opening, Malleable Iron, Galvanized Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Use for drywall to light gauge steel studs.
Pro-Fit 0280074 Drywall Screw Pro-Fit 0280104 Drywall Screw Pro-Fit 0280134 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280154 Drywall Screw Pro-Fit 0280174 Drywall Screw Deuer DB30E Swivel Eye Cable Block
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Deuer DB30G Fixed Eye Gable Block Red Devil 45943-22 Turnbuckle Ratchet Load Binder Deuer DB30HS Swivel Eye Scissor Hook Block
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block.
Baron 0 0205/50200 Pre-Cut Aircraft Cable Cambell 620-3205 Double Swivel Lever Load Binder Baron 50201/50210 Pre-Cut Flexible Aircraft Cable
Aircraft cable. SWL indicated the safe working load. Lever load binder used to tighten chain, typically for cargo securement. Double swivel lever, for chain size 1/4"/20 and 43, Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. DO NOT use for overhead lifting or hoisting or exceed working load limits. Aircraft cable. SWL indicated the safe working load.
National Hardware V3225 Single Pulley Block and Tackle Set Pro-Fit 0280174M Drywall Screw Baron 0 7005/50070 Pre-Cut Extra Flexible Aircraft Cable
PULLEYS 2IN ZN PLT
Our Price: $25.44
National Hardware Single Pulley Block and Tackle Set, Series: V3225, 3/8 in Maximum Cable, 480 lb Load Capacity, 2.13 in Outer Diameter, 2 in Sheave Width, Swivel Eye Connection, 2.61 in Side Plate Length, 0.64 in Eye Diameter, 0.39 in Diameter Groove, Fasteners: Chain/Rope Accessory, 6.23 in Overall Height, Steel, Die Cast Sheave, Zinc Plated Use for drywall to light gauge steel studs. Aircraft cable.
Baron 260-1 Wire Rope Clip Baron 50255/50225 Pre-Cut Flexible Aircraft Cable Baron 96005/50069 Pre-Cut Extra Flexible Aircraft Cable
Baron Wire Rope Clip, 1 in Opening, Malleable Iron, Galvanized Aircraft cable. SWL indicated the safe working load. Aircraft cable.
Pro-Fit 0288124 Drywall Screw Deuer DB35G Fixed Eye Gable Block Cambell 7670744/52338 Cable Ferrule
Use for drywall to 20 gauge to 14 gauge steel studs. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Extruded constrution. Used for creating eye terminations on cable or wire rope.
Baron 0 3205/50230 Pre-Cut Aircraft Cable Baron 50215/50215 Pre-Cut Flexible Aircraft Cable Baron 54205/50245 Pre-Cut Extra Flexible Aircraft Cable
Aircraft cable. SWL indicated the safe working load. Aircraft cable. SWL indicated the safe working load. Aircraft cable. SWL indicated the safe working load.
Deuer DB35E Swivel Eye Cable Block Deuer DB35HS Swivel Eye Scissor Hook Block S-Line 45943-10 Lever Chain Binder
Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Blocks have a 'hairpin' type removable cotter pin holding the clevis pin. This allows the sheave to be removed for rigging into cable at any point, in the same manner as a snatch block. Blocks are all steel and entirely bright zinc plated for maximum corrosion resistance; Standard Working Load (capacity) stamped on each block. Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually.
CABLE GALV PRECUT 7X19 1/4 50 Baron 57005/50075 Pre-Cut Extra Flexible Aircraft Cable Pro-Fit 0288104 Drywall Screw
Aircraft cable. Aircraft cable. Use for drywall to 20 gauge to 14 gauge steel studs.
Cambell 7679038 Swaging Tool S-Line 45943-20 Turnbuckle Ratchet Chain Binder TOOL SWAG NO2 CHRMT/YEL
For securing ferrules and stops onto wire rope or cable Use on rope sized 1/8 - 3/16". Do not swage on coated cable. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended Designed to swage ferrules and stops in making wire rope loops. Hardened steel body and bolts to give swaging strength. User to use when combined with a vise to hold swage tool steady. Follow swaging instructions that come with ferrules and stops.
Baron 53205/50235 Pre-Cut Flexible Aircraft Cable