Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > ANCHOR SHACKLES
Sort By:
1
Campbell T7665012 Welded Ring Fehr Bros 3/16 Anchor Shackle Fehr Bros 1/4IN Anchor Shackle
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
National Hardware 3155BC Ring Campbell T7665032 Welded Ring National Hardware 3155BC Ring
RINGS #7X1IN ZN PLT
Our Price: $1.03
RINGS #4X1-1/4IN ZN PLT
Our Price: $1.09
National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Zinc Plated, 195 lb Load Capacity, For Rope, Chain and Strap Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Ring, Series: 3155BC, NO 4 X 1-1/4 in, Steel, Zinc Plated, 270 lb Load Capacity, For Rope, Chain and Strap
Campbell T7661152 Welded Ring National Hardware 3155BC Ring National Hardware 3155BC Ring
RINGS #3X1-1/2IN ZN PLT
Our Price: $1.13
RINGS #7X1IN BRS
Our Price: $1.14
Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Ring, Series: 3155BC, NO 3 X 1-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 7 X 1 in, Steel, Brass, 195 lb Load Capacity, For Rope, Chain and Strap
Campbell T7660841 Welded Ring Midland Big Orange 081163/MC645G Anchor Shackle Campbell T7665042 Welded Ring
Campbell Welded Ring, NO 4 Chain, 1-1/4 in Length X 0.22 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Campbell Welded Ring, NO 3 Chain, 1-1/2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3156BC Ring RING BRASS NO4X1-1/4IN        Fehr Bros 5/16 Anchor Shackle
RINGS 1IN SLD BRS
Our Price: $1.30
RINGS #4X1-1/4IN BRS
Our Price: $1.30
National Hardware Ring, Series: 3156BC, 1 in, Solid Brass, 195 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 4 x 1-1/4 in, Steel, Brass, 270 lb Load Capacity Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Midland Big Orange 081213/MC646G Anchor Shackle Campbell T7665001 Welded Ring National Hardware 3156BC Ring
RINGS 1-1/8IN SLD BRS
Our Price: $1.54
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Campbell Welded Ring,, 2 in Length X 0.26 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity National Hardware Ring, Series: 3156BC, 1-1/8 in, Solid Brass, 215 lb Load Capacity, For Rope, Chain and Strap
RING BRASS NO3X1-1/2IN        National Hardware 3156BC Ring National Hardware 3155BC Ring
RINGS #3X1-1/2IN BRS
Our Price: $1.54
RINGS 1-1/4IN SLD BRS
Our Price: $1.65
RINGS #2X2IN ZN PLT
Our Price: $1.65
National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 3 x 1-1/2 in, Steel, Brass, 300 lb Load Capacity National Hardware Ring, Series: 3156BC, 1-1/4 in, Solid Brass, 235 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 2 X 2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap
Midland Big Orange 081253/MC647G Anchor Shackle National Hardware 3155BC Ring Campbell T7661361 Welded Ring
RINGS #2X2-1/2IN ZN PLT
Our Price: $1.76
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 National Hardware Ring, Series: 3155BC, NO 2 X 2-1/2 in, Steel, Zinc Plated, 300 lb Load Capacity, For Rope, Chain and Strap Campbell Welded Ring, NO 2 Chain, 2-1/2 in Length X 0.26 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity
National Hardware 3155BC Ring National Hardware 3156BC Ring Fehr Bros 3/8 Anchor Shackle
RINGS #2X2IN BRS
Our Price: $1.82
RINGS 1-1/2IN SLD BRS
Our Price: $1.89
National Hardware Ring, Series: 3155BC, NO 2 X 2 in, Steel, Brass, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3156BC, 1-1/2 in, Solid Brass, 275 lb Load Capacity, For Rope, Chain and Strap Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Baron 2017Z Strap Eye Double End Swivel RING BRASS NO2X2-1/2IN        Midland Big Orange 081293/MC648G Anchor Shackle
RINGS #2X2-1/2IN BRS
Our Price: $2.27
Baron Double End Swivel, Strap Eye, 3/4 in Eye, Zinc Plated Designed as connectors for rope, chain and strap. Manufactured from steel. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Baron 018-5/8 Round Eye Double End Swivel National Hardware 3156BC Ring National Hardware 3155BC Ring
RINGS 1-3/4IN SLD BRS
Our Price: $2.47
RINGS #1X3IN ZN PLT
Our Price: $2.47
Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated National Hardware Ring, Series: 3156BC, 1-3/4 in, Solid Brass, 300 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: 3155BC, NO 1 X 3 in, Steel, Zinc Plated, 850 lb Load Capacity, For Rope, Chain and Strap
Campbell T7662154 Welded Ring National Hardware 3156BC Ring RING BRASS NO1X3IN
RINGS 2IN SLD BRS
Our Price: $2.62
RINGS #1X3IN BRS
Our Price: $2.62
Campbell Welded Ring, NO 7B Chain, 2 in Length X 1/4 in Wire Size, Solid Bronze, Polished, 150 lb Load Capacity National Hardware Ring, Series: 3156BC, 2 in, Solid Brass, 325 lb Load Capacity, For Rope, Chain and Strap National Hardware Ring, Series: N244, Suitable For Use With: Connecting Rope, Chain or Strap, NO 1 x 3 in, Steel, Brass, 850 lb Load Capacity
Baron 018-3/4 Round Eye Double End Swivel SWIVEL DBL ROUND EYE NIC 1 IN Midland Big Orange 081343/MC649G Anchor Shackle
Baron Double End Swivel, Round Eye, 3/4 in Eye X 2-3/4 in Overall Length, Iron, Nickel Plated Baron Double Swivel, Round Eye, 100 lb, 1 in Snap Opening, 3-9/16 in Eye Width, 3-1/8 in Overall Length, Nickel-Plated Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
National Hardware 3135BC Round Eye Snap Swivel Baron C-018-5/8 Round Eye Double End Swivel SWIVEL NICKEL 1X1IN
SWIVELS 1X1IN NICKEL
Our Price: $3.47
National Hardware Swivel, Round Eye Snap, Series: 3135BC, 5/8 X 5/8 in, Zinc Die Cast, Nickel Plated, 105 lb Load Capacity, For Connecting Rope or Chain Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated National Hardware Swivel Loop Eye, Series: N222, Suitable For Use With: Connecting Rope or Chain, 1 x 1 in, Zinc Die Cast, Nickel, 55 lb Load Capacity
Fehr Bros 1/2 Anchor Shackle Midland Big Orange 081373/MC650G Anchor Shackle National Hardware N223-677 Anchor Shackle
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 National Hardware Anchor Shackle, Series: 3250BC, 1000 lb Load Limit, 5/16 in, Forged Steel Body, Galvanized, Federal Specifications RR-C-271D, Type IV, Class 2, BHMA A138.18, For Marine, Industrial and Construction Applications
Campbell T5423300 Twin Clevis Link SWIVEL FORGED GALV 3/16IN     SWIVEL FORGED GALV 1/4IN
For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16" Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting.
LINK CLEVIS DBL 1/4&5/16IN    LINK CLVS DBL 5/16IN          Fehr Bros 5/8 Anchor Shackle
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Baron 82180/196 Double Clevis Link National Hardware 3248BC Double Clevis Link SWIVEL FORGED GALV 5/16IN
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. National Hardware Clevis Link, Double, Series: 3248BC, Suitable For Use With: Chain of an Equal or Lower Grade, 3/8 in, Forged Steel, Zinc Plated, 5400 lb Load Capacity, Grade 43 Specifications, For Making Quick Connections With Two Chains in Industrial and Construction Applications Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting.
Baron 81380/196 Double Clevis Link Midland Big Orange 081443/MC651G Anchor Shackle LINK CLVS 3/8IN
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
Campbell T5423301 Twin Clevis Link Koch 083213/89582 Double End Swivel Koch 100942/48979 Mini Load Binder
For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16" Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments. Stamped steel construction. Zinc finish.
Koch 083253/89583 Double End Swivel SWIVEL FORGED GALV 3/8IN      LINK CLVS DBL ZN PLT 1/2IN
Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments. Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
Baron 82480/196 Double Clevis Link Fehr Bros 3/4 Anchor Shackle Koch A01160 Proof Coil Chain
Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Welded low carbon steel.This chain can be used in applications which do not require a high strength to weight ratio.Poly bagged.
S-Line 50025-10 Mini Chain Binder Koch 083293/89584 Double End Swivel Campbell T5423302 Twin Clevis Link
Heat treated steel body with carbon steel hooks.  Intended for use in light duty farm, fencing and industrial binding applications where load factor is minimal.  Hook swivels 360 degrees and tightener is designed to toggle away from load. Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments. Forged steel; finish is Zinc Plated. For use with Proof Coil or High Test chain.
LINK CLVS 1/2IN               Midland Big Orange 081503/MC652G Anchor Shackle SWIVEL FORGED GALV 1/2IN
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting.
LINK CLVS DBL ZN PLT 5/8IN    Fehr Bros 7/8 Anchor Shackle Koch 083373/89585 Double End Swivel
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments.
Midland Big Orange 081543/MC653G Anchor Shackle Fehr Bros 1 Anchor Shackle Koch A01161 Proof Coil Chain
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Welded low carbon steel.This chain can be used in applications which do not require a high strength to weight ratio.Poly bagged.
S-Line 45943-12 Lever Chain Binder Red Devil 45943-22 Turnbuckle Ratchet Load Binder Midland Big Orange 081593/MC654G Anchor Shackle
Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
Cambell 620-3205 Double Swivel Lever Load Binder S-Line 45943-10 Lever Chain Binder LBM G93421 Multi-Use Screw
Lever load binder used to tighten chain, typically for cargo securement. Double swivel lever, for chain size 1/4"/20 and 43, Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. DO NOT use for overhead lifting or hoisting or exceed working load limits. Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Yellow dacronized coating. Not for use in ACQ lumber.
Midland Big Orange 081613/MC655G Anchor Shackle S-Line 45943-20 Turnbuckle Ratchet Chain Binder LBM G93422 Multi-Use Screw
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended Yellow dacronized coating. Not for use in ACQ lumber.
LBM G02685 Multi-Use Screw LBM G03447 Multi-Use Screw S-Line 45943-21 Turnbuckle Ratchet Chain Binder
Yellow dacronized coating. Not for use in ACQ lumber. Yellow dacronized coating. Not for use in ACQ lumber. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended
S-Line 45943-11 Lever Chain Binder Cambell 620-7504 Manual Ratchet Load Binder Camo 0356109 Deck Screw
Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Ratchet load binder used to tighten chain, typically for cargo securement. 8" in take-up. For chain size 5/16" (System 7) and for chain size 3/8" (System 4) Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. DO NOT use for overhead lifting or hoisting or exceed the working load limit. Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
Camo 0341109 Deck Screw Western States 51325 Deck Screw Western States 51324 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green 4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification. 4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
LBM G93405 Multi-Use Screw Pro-Fit 0281179 Deck Screw Pro-Fit 0281109 Deck Screw
Yellow dacronized coating. Not for use in ACQ lumber. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0281159 Deck Screw Pro-Fit 0281199 Deck Screw Pro-Fit 0281139 Deck Screw
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Western States 51326 Deck Screw Camo 0356139 Deck Screw Camo 0341139 Deck Screw
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification. Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
LBM G93415 Multi-Use Screw North American Tool 7518 Chain Hoist Western States 51323 Deck Screw
Yellow dacronized coating. Not for use in ACQ lumber. 9'10" lift height, 12.5" required head room, 1/4" grade 80 steel chain, fully portable for use indoors or out, forged 360 degree swivel hooks, mechanical load brake, hardened steel construction. 4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
North American Tool 7519 Gear Driven Chain Hoist Western States 51322 Deck Screw Pro-Fit 0281079 Deck Screw
1/4" grade 80 steel chain, forged 360 degree hooks, mechanical load brake for positive load control when lifting or spotting, hardened steel construction, 14" required head room,  fully portable for outdoor or indoor use. Lift height: 9'10", 4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification. Use for exterior deck and railing projects where rust resistance is important.
LBM G93403 Multi-Use Screw Pro-Fit 0285102 Deck Screw Pro-Fit 0285132 Deck Screw
Yellow dacronized coating. Not for use in ACQ lumber. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Pro-Fit 0285152 Deck Screw Pro-Fit 0285172 Deck Screw Pro-Fit 0285192 Deck Screw
Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Camo 0356159 Deck Screw Camo 0341159 Deck Screw Western States 51321 Deck Screw
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green 4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
Type XT-II GTXT300 Deck Screw Type XT-II GTXT112 Deck Screw Power Pull 400 Chain Block
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Pull triple geared chain block hoist is ideal for automotive, industrial and individual farm and marine use. Thick heat-treated steel construction prevents damage from extra rough handling. Interchangeable parts keep maintenance costs at a minimum.
Type XT-II GTXT212 Deck Screw Camo 0356179 Deck Screw Camo 0341179 Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 9 Screw, 3 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
Type XT-II GTXT200 Deck Screw Power Pull 400 Chain Block Power Pull 600 Heat Treated Chain Puller
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Pull triple geared chain block hoist is ideal for automotive, industrial and individual farm and marine use. Thick heat-treated steel construction prevents damage from extra rough handling. Interchangeable parts keep maintenance costs at a minimum. Chain Pullers pull, lift, and drag with ease and speed. Specifications: Rated Capacity: 3/4-ton  Tested Load: 1-1/8-ton Standard Lift: 5 feet Chain diameter: 1/4" Handle length: 11-3/16" Net weight: 17.7 lbs
Camo 0356199 Deck Screw Camo 0341199 Deck Screw Power Pull 600 Heat Treated Chain Puller
Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan Camo Deck Screw, Multi-Purpose, NO 10 Screw, 3-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green Chain Pullers pull, lift, and drag with ease and speed. 5 Foot Lift. Specifications: Rated Capacity: 1-1/2-ton Tested Load: 2-1/4-ton Standard Lift: 5 feet Chain diameter: 5/16" Handle length: 16-3/8" Net weight: 26.5 lbs
Campbell 0143636 Proof Tested Coil Chain Power Pull 400 Chain Block Baron PC30316SP Welded Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Triple geared block chain hoist; portable and designed to operate under rugged conditions. Thick, specially heat-treated steel construction prevents damage from extra rough handling. Interchangeable parts keep maintenance costs at a minimum. Specifications: Rated Capacity - 2 Ton, Test Load - 3 Ton, Standard Lift - 10', Chain Diameter - 5-16". Applications: Ideal for automotive, industrial and individual farm and marine use. General purpose chain.
Baron PC3014SP Welded Proof Coil Chain Baron PC3038SP Welded Proof Coil Chain Campbell 072-2327 Proof Coil Chain
General purpose chain. General purpose chain. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains. >WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 014-3626 Proof Coil Chain Baron PC30516SP Proof Coil Chain Campbell 072-5027 Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. General purpose chain. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains. >WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 014-3326 Proof Coil Chain Campbell 014-3426 Proof Coil Chain Campbell 014-3526 Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell PD0725027 Proof Coil Chain Baron PC30516P Welded Proof Coil Chain Campbell 072-2227 Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains. >WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. General purpose chain. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains. >WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
SCREW RT CMPST TRIM 9X3-1/8IN Baron PC3038P Welded Proof Coil Chain Baron PC3014P Welded Proof Coil Chain
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. General purpose chain. General purpose chain.
Campbell 014-3536 Proof Tested Welded Coil Chain SCREW FIN/TRIM 8X2-1/2IN      Campbell 014-0623 Proof Coil Chain
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $306.01
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
SCREW RT CMPST TRIM 9X2-1/2IN Campbell 014-0523 Proof Coil Chain Campbell 014-0423 Proof Coil Chain
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 014-3336 Proof Coil Chain Campbell 0143436 Proof Tested Coil Chain Baron PC30316P Welded Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. General purpose chain.
Campbell 0140823/671015 Proof Coil Chain Campbell 014-0323 Proof Coil Chain Camo 0348159S Deck Screw
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Self-colored. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Camo Deck Screw, NO 10 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Campbell 014-0633 Proof Coil Chain Campbell 014-0533 Proof Coil Chain Campbell 014-0433 Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 014-0333 Proof Coil Chain
Excellent general-purpose chain of standard commercial quality. Frequently used for fabricating tow chains, binding or tie down chains, and logging chains. Low carbon steel standard material. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
   
 
1