Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > CHAIN - COLD SHUTS
Sort By:
1
SHUT COLD ZINC PLATED 3/16IN  SPRING SNAP STEEL ZN 3/16     Campbell T4900324 Cold Shut
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell T4900424 Cold Shut National Hardware 3153BC Cold Shut National Hardware 3153BC Cold Shut
COLD SHUTS 1/4IN ZN PLT
Our Price: $1.09
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. National Hardware Cold Shut, Series: 3153BC, 1/4 in, 0.24 in Rod Diameter, 0.26 in Hole Diameter, Steel, Zinc Plated, 1250 lb Load Capacity, 1.61 in Width, For Use to Couple Chain Attachments National Hardware Cold Shut, Series: 3153BC, 5/16 in, 0.32 in Rod Diameter, 0.35 in Hole Diameter, Steel, Zinc Plated, 1900 lb Load Capacity, 1.94 in Width, For Use to Couple Chain Attachments
Campbell T4900524 Cold Shut Campbell T4900624 Cold Shut Baron 2450-1/4 Snap Link
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
SHUT COLD ZINC PLATED 3/8IN   SNAP LINK 9/32                SPRING SNAP ASST AL 5/16
COLD SHUTS 3/8IN ZN PLT
Our Price: $1.56
Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Baron Spring Snap, 75 lb, 1/2 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Aluminum
SNAP SPRG INTRLK ZN 1/4X2IN   Lehigh 7035BM-2P30 Assorted Spring Snap Link SPRING SNAP STEEL ZN 11/32
Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. Ideal for securing keys and accessories. Versatile for students, hikers, bikers, boaters, hunters, contractors and maintenance workers. Assorted vibrant colors. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
SNAP LINK 5/16                Western States 77989 Masonry Tapping Screw Baron 2017Z Strap Eye Double End Swivel
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Baron Double End Swivel, Strap Eye, 3/4 in Eye, Zinc Plated
Western States 77988 Masonry Tapping Screw Western States 7799-5 Masonry Tapping Screw National Hardware 3153BC Cold Shut
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. National Hardware Cold Shut, Series: 3153BC, 7/16 in, 0.42 in Rod Diameter, 0.43 in Diameter, Steel, Zinc Plated, 3500 lb Load Capacity, 2.54 in Width, For Use to Couple Chain Attachments
Campbell T4900824 Cold Shut Baron 018-5/8 Round Eye Double End Swivel National Hardware TP3113BC Interlocking Spring Snap
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated National Hardware Interlocking Spring Snap, Series: TP3113BC, 50 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Aluminum, Steel, Multi-Color, For Quick Attachment of Gear, Keys, Tools and Other Equipment
Western States 77994 Masonry Tapping Screw Baron 018-3/4 Round Eye Double End Swivel National Hardware 3153BC Cold Shut
COLD SHUTS 1/2IN ZN PLT
Our Price: $2.82
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Baron Double End Swivel, Round Eye, 3/4 in Eye X 2-3/4 in Overall Length, Iron, Nickel Plated National Hardware Cold Shut, Series: 3153BC, 1/2 in, 0.47 in Rod Diameter, 0.52 in Hole Diameter, Steel, Zinc Plated, 4500 lb Load Capacity, 2.64 in Width, For Use to Couple Chain Attachments
SWIVEL DBL ROUND EYE NIC 1 IN Wellington 7038CG-50FB Spring Snap Link Koch 245291 Rigid Round Eye Spring Snap Link
Baron Double Swivel, Round Eye, 100 lb, 1 in Snap Opening, 3-9/16 in Eye Width, 3-1/8 in Overall Length, Nickel-Plated 3" aluminum camouflage gear clips, glossy assortment, 50 pcs in fish bowl container. Koch Spring Snap Link, Rigid Round Eye, 3/8 in Eye X 2-3/4 in Length X 9/32 in Opening, Zinc Plated
SNAP SPRG ASST COLOR 3-1/8IN  National Hardware 3112BC Interlocking Spring Snap National Hardware 3135BC Round Eye Snap Swivel
National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring National Hardware Interlocking Spring Snap, Series: 3112BC, 165 lb Load Capacity, 5/16 in Snap Opening, 2-3/8 in Eye Width, Steel, Zinc Plated, Gray, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications National Hardware Swivel, Round Eye Snap, Series: 3135BC, 5/8 X 5/8 in, Zinc Die Cast, Nickel Plated, 105 lb Load Capacity, For Connecting Rope or Chain
Baron 2450-3/8 Snap Link CobraTap 620W Concrete Screw Baron C-018-5/8 Round Eye Double End Swivel
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Baron Double End Swivel, Round Eye, 5/8 in Eye X 2-3/8 in Overall Length, Nickel Plated
Koch 243231 Assorted Spring Link CobraTap 621W Concrete Screw SWIVEL NICKEL 1X1IN
SWIVELS 1X1IN NICKEL
Our Price: $3.65
Designed for use with rope, chain, strap, animal leashes and other home, farm an recreational applications. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. National Hardware Swivel Loop Eye, Series: N222, Suitable For Use With: Connecting Rope or Chain, 1 x 1 in, Zinc Die Cast, Nickel, 55 lb Load Capacity
Western States 77990 Masonry Tapping Screw Koch 245341 Rigid Round Eye Spring Snap Link Koch 245211 Rigid Round Eye Spring Snap Link
Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs. Koch Spring Snap Link, Rigid Round Eye, 7/16 in Eye X 3-1/8 in Length X 5/16 in Opening, Zinc Plated Koch Spring Snap Link, Rigid Round Eye, 1/4 in Eye X 2 in Length X 3/16 in Opening, Zinc Plated
CobraTap 622W Concrete Screw SNAP SPRG CAMO ALU/STL 3-1/8IN Western States 77991 Masonry Tapping Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. National Hardware Spring Snap, Interlocking, 150 lb, 3-1/8 in Overall Length, Aluminum Body and Steel Spring Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
SNAP SPRG INTRLK ZN 5/8X4.72IN CobraTap 623W Concrete Screw SPRING SNAP LINK SS 1/4
Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Baron Spring Snap, 5/16 in Snap Opening, 1/4 in Eye Width, 2-3/8 in Overall Length, Stainless Steel
Baron C-2450-3/8 Snap Link National Hardware 3112BC Interlocking Spring Snap Western States 77996 Masonry Tapping Screw
Baron Snap Link, 3/8 in Diameter X 4 in Overall Length X 1/2 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks National Hardware Spring Snap, Interlocking, Series: 3112BC, 315 lb Load Capacity, 1/2 in Snap Opening, 1-3/8 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
CobraTap 630W Concrete Screw National Hardware 3112BC Interlocking Spring Snap Western States 77997 Masonry Tapping Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. National Hardware Spring Snap, Interlocking, Series: 3112BC, 360 lb Load Capacity, 1/2 in Snap Opening, 3-15/16 in Overall Length, Steel, Zinc Plated, For Lifting, Pulling, Mooring and Other Farm, Marine and Recreational Applications Designed for quick, safe, secure fastening for a variety of jobs in poured concrete, brick, cinder block/masonry. Provides self-threading action/maximum holding power for fastening conduit clips; junction boxes; wall partitions/insulation; window/door frames; gutters/roof flashing; shelving; cabinets; furring strips; expansion joints; stud track; duck strap; joist hangers/signs.
Baron C-2450-1/2 Snap Link SPRING SNAP INTRLOCK SS 1/4   CobraTap 624W Concrete Screw
Baron Snap Link, 1/2 in Diameter X 5-1/2 in Overall Length X 3/4 in Jaw Opening, Steel, Nickel Plated, Includes: Spring Hooks Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
CobraTap 631W Concrete Screw SNAP SPRG INTRLK ZN 3/4X5.51IN Campbell T5423300 Twin Clevis Link
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16"
CobraTap 632W Concrete Screw CobraTap 620J Concrete Screw CobraTap 633W Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
CobraTap 621J Concrete Screw SWIVEL FORGED GALV 3/16IN     Baron 82180/196 Double Clevis Link
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening.
SWIVEL FORGED GALV 1/4IN      LINK CLEVIS DBL 1/4&5/16IN    CobraTap 626W Concrete Screw
Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible.
LINK CLVS DBL 5/16IN          SPRING SNAP LINK SS 5/16      CobraTap 634W Concrete Screw
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Baron Spring Snap, 280 lb, 3/8 in Snap Opening, 5/16 in Eye Width, 3-1/8 in Overall Length, Stainless Steel, Zinc Plated, Includes: Spring Hooks Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Drill bit included in 10 piece packs,  combined head (Robertson & Philips). ACQ compatible.
SPRING SNAP INTRLOCK SS 5/16  CobraTap 622J Concrete Screw SNAP SPRG INTRLK ZNC 1X4.2IN
Baron Spring Snap, Interlocking, 400 lb, 5/16 in Snap Opening, 5/16 in Eye Width, 2-3/8 in Overall Length, Stainless Steel, For Lifting, Pulling, Mooring And Other Farm, Marine and Recreational Applications Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring.
CobraTap 623J Concrete Screw CobraTap 631J Concrete Screw SPRING SNAP LINK SS 11/32
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Baron Spring Snap, 160 lb, 1/2 in Snap Opening, 11/32 in Eye Width, 3-1/2 in Overall Length, Stainless Steel, Zinc Plated
National Hardware 3248BC Double Clevis Link SWIVEL FORGED GALV 5/16IN     Baron 81380/196 Double Clevis Link
National Hardware Clevis Link, Double, Series: 3248BC, Suitable For Use With: Chain of an Equal or Lower Grade, 3/8 in, Forged Steel, Zinc Plated, 5400 lb Load Capacity, Grade 43 Specifications, For Making Quick Connections With Two Chains in Industrial and Construction Applications Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening.
CobraTap 636W Concrete Screw Power Con 54105-1 Masonry Tapping Screw Power Con 54113-1 Masonry Tapping Screw
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue.
Power Con 54085 Masonry Tapping Screw Power Con 54087 Masonry Tapping Screw Power Con 54103-1 Masonry Tapping Screw
Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue.
Campbell T5423301 Twin Clevis Link CobraTap 624J Concrete Screw CobraTap 632J Concrete Screw
For use with Proof Coil or High Test Chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. No. T5423300 For chain  1/4" x 5/16"; Opening = 7/16    Pin = 3/8". No. T5423301 For chain 3/8"; Opening = 1/2"    Pin = 7/16" Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
LINK CLVS 3/8IN               Koch 083213/89582 Double End Swivel Power Con 54115-1 Masonry Tapping Screw
Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments. Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue.
Power Con 54089 Masonry Tapping Screw SPRING SNAP INTRLOCK SS 3/8   Koch 083253/89583 Double End Swivel
Hardened steel, diamond point. Designed for quick, secure fastening for a variety of jobs in poured concrete, brick and cinder block/masonry. Diamond point provides self-threading, maximum holding power for fastening conduit clips, furring strips, junction boxes, expansion joints, wall partitions/insulation, stud track, window/door frames, duct strap, gutters, joist hangers, shelves, signs and cabinets. Blue. Baron Spring Snap, Interlocking, 400 lb, 11/16 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel, For Marine, Industrial and Agricultural Use Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments.
SWIVEL FORGED GALV 3/8IN      LINK CLVS DBL ZN PLT 1/2IN    Baron 82480/196 Double Clevis Link
Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Drop forged - heat treated carbon steel. Clevis pin is carbon steel - heat treated, cotter key is mild steel. Designed for joining together links of Grade 30 (proof coil) and Grade 43 (high test) chain without welding or peening.
CobraTap 633J Concrete Screw SPRING SNAP LINK SS 3/8       Koch 083293/89584 Double End Swivel
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Baron Spring Snap, 400 lb, 1/2 in Snap Opening, 3/8 in Eye Width, 4 in Overall Length, Stainless Steel Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments.
Campbell T5423302 Twin Clevis Link CobraTap 634J Concrete Screw LINK CLVS 1/2IN
Forged steel; finish is Zinc Plated. For use with Proof Coil or High Test chain. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting.
Tapcon 24350 Concrete Screw SPRING SNAP LINK SS 7/16      SWIVEL FORGED GALV 1/2IN
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Baron Spring Snap, 320 lb, 5/8 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, Polished, For Marine, Industrial and Agricultural Use Designed to eliminate tangling of chain and rope. Manufactured from forged steel. Not designed for over-head lifting.
SPRING SNAP INTRLOCK SS 7/16  LINK CLVS DBL ZN PLT 5/8IN    CobraTap 620T Concrete Screw
Baron Spring Snap, Interlocking, 1100 lb, 3/4 in Snap Opening, 7/16 in Eye Width, 4-3/4 in Overall Length, Stainless Steel, For Lifting, Pulling, Marine, Recreational Mooring and Other Farm Applications Designed for making quick connections with two chains in industrial and construction applications. Meets Grade 70 specifications. Removable clevis is for easier rigging. Manufactured from forged steel. Not designed for over-head lifting. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
CobraTap 636J Concrete Screw Tapcon 24355 Concrete Screw Midwest 3925 Fender Washer
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Midwest Fender Washer, 3/16 in Nominal, 1 in Outside Diameter, Zinc Plated
Midwest 3928 Fender Washer Koch 083373/89585 Double End Swivel CobraTap 621T Concrete Screw
Midwest Fender Washer, 1/4 in Nominal, 1 in Outside Diameter, Zinc Plated Forged steel construction. Swivel feature allows for less tangling or kinking of the chain for the easy repair of c hain or for joining attachments. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
Tapcon 24360 Concrete Screw CobraTap 630T Concrete Screw CobraTap 622T Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible.
CobraTap 623T Concrete Screw CobraTap 631T Concrete Screw Tapcon 24365 Concrete Screw
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Tapcon 24375 Concrete Screw Midwest 3929 Fender Washer CobraTap 624T Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. Midwest Fender Washer, 1/4 in Nominal, 1-1/4 in Outside Diameter, Zinc Plated Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible.
CobraTap 632T Concrete Screw CobraTap 633T Concrete Screw ANCHOR CNCRT PFH 3/16 X1-1/4IN
Phillips and Robertson compatible. High grade steel, corrosion resistant, high and low thread for ease of installation and maximum holding power. ACQ compatible. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
Tapcon 24380 Concrete Screw Campbell 702024/695982 Type Y Porch Tenso Pattern Swing Chain CobraTap 626T Concrete Screw
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry. "Y" Type Tenso Pattern. Includes of two "Y" chain/two ceiling hooks. 7-1/2' overall length. No.2/0 leader 5' long; No.1/0 branches 2-1/2' long. Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs.
ANCHOR CNCRT PFH 3/16 X1-3/4IN Midwest 3849 USS Flat Washer Midwest 3845 USS Flat Washer
Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Midwest Flat Washer, USS, 1-1/2 in Nominal, Zinc Plated Midwest Flat Washer, USS, 1 in Nominal, Zinc Plated
Midwest 3847 USS Flat Washer Midwest 3844 USS Flat Washer Tapcon 24385 Concrete Screw
Midwest Flat Washer, USS, 1-1/4 in Nominal, Zinc Plated Midwest Flat Washer, USS, 7/8 in Nominal, Zinc Plated Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Midwest 3930 Fender Washer SCREW CALIBURN 25PK 19/64X2-3/ Tapcon 24395 Concrete Screw
Midwest Fender Washer, 1/4 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower installation torque. 'Climaseal' coating provides extra corrosion resistance. Applications: Electrical junction boxes, conduit clips, HVAC strapping, 2 x 4 lumber, wood headers, furring strips, hurricane shutters,window frames, jambs and sills, door frames to masonry, plywood backer boards to masonry, exterior insulation to masonry.
Midwest 3843 USS Flat Washer Midwest 3933 Fender Washer Midwest 3842 USS Flat Washer
Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated Midwest Fender Washer, 5/16 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated Midwest Flat Washer, USS, 5/8 in Nominal, Zinc Plated
Midwest 3841 USS Flat Washer SCREW CALIBURN 50PK 1/4X1-3/4I SCREW CALIBURN 50PK 1/4X1-3/4I
Midwest Flat Washer, USS, 9/16 in Nominal, Zinc Plated For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
ANCHOR CNCRT PFH 3/16 X2-1/4IN Midwest 3935 Fender Washer SCREW CALIBURN 25PK 19/64X3-1/
Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Midwest Fender Washer, 3/8 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
Midwest 3840 USS Flat Washer SCREW CALIBURN 50PK 1/4X2-1/4I SCREW CONCRETE 1/4X2-1/4IN
Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated, BX117 For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
ANCHOR CNCRT PFH 1/4 X 2-3/4IN SCREW CONCRETE 1/4X2-3/4IN    ANCHOR CNCRT PFH 3/16 X2-3/4IN
Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
CobraTap 634T Concrete Screw Midwest 3839 USS Flat Washer SCREW CONCRETE 1/4X3-1/2IN
Corrosion resistant, high and low thread for installation and maximum holding power. Bonus: Combined head driver (Robertson & Phillips) drill bit included in 25 and 100 piece packs. Midwest Flat Washer, USS, 7/16 in Nominal, Zinc Plated For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber.
SCREW CALIBURN 25PK 19/64X5IN Midwest 3838 USS Flat Washer Midwest 3837 USS Flat Washer
For heavy duty concrete and masonry. Zero stripping recessed Star Drive. Aggressive Heavy duty threads lock into concrete. Can be removed and reinserted without screw damage. Countersinking Bugle Head locks wood to concrete for complete installation and effective anchoring. Caliburn PH pan head is ideal for an exposed finished look including installation of electrical boxes. Caliburn XL washer head design for superior holding power. Caliburn XL is code approved under ICC report ESR-3251. Climatek coating is AC257 code approved for use in treated lumber. Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated
Midwest 3936 Fender Washer Midwest 5629 USS Flat Washer Midwest 5628 USS Flat Washer
Midwest Fender Washer, 1/2 in Nominal, 2 in Outside Diameter, Zinc Plated Midwest Flat Washer, USS, 5/8 in Nominal, Galvanized Midwest Flat Washer, USS, 1/2 in Nominal, Galvanized
Midwest 5627 USS Flat Washer Midwest 3836 USS Flat Washer Midwest 5626 USS Flat Washer
Midwest Flat Washer, USS, 3/8 in Nominal, Galvanized Midwest Flat Washer, USS, 1/4 in Nominal, Zinc Plated Midwest Flat Washer, USS, 5/16 in Nominal, Galvanized
Midwest 5625 USS Flat Washer Campbell 0712017 Twist Chain Campbell 072-2427 Lock Link Single Wrapped Loop Chain
Midwest Flat Washer, USS, 1/4 in Nominal, Galvanized Campbell Twist Chain, NO 200 Chain, 48 ft Length, 12 lb Load Capacity, 0.79 in Material Diameter, 0.4 in Inner Length, 0.16 in Inner Width, Brass Plated Ideal for sprocket wheel, overhead door chains, general utility use. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Campbell 0710517 Clock Chain Campbell 0710717 Clock Chain Campbell 0719027 Twist Chain
Hobby and Craft clock chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Hobby and Craft clock chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Campbell Twist Chain, NO 90 Chain, 82 ft Length, 5 lb Load Capacity, 0.056 in Material Diameter, 0.21 in Inner Length, 0.12 in Inner Width, Nickel Plated
Campbell 0722957 Passing Link Chain Midwest 3835 USS Flat Washer Midwest 4696 USS Flat Washer
For general utility, farm and animal applications. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Midwest Flat Washer, USS, 3/16 in Nominal, Zinc Plated Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated
Midwest 4695 USS Flat Washer Midwest 4694 USS Flat Washer Campbell 099-0647 Straight Welded Single Loop Chain
Midwest Flat Washer, USS, 5/8 in Nominal, Zinc Plated Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated For decorative non-load bearing use only. Use for creating borders for flower beds, gardens, driveways, etc. Don not use for overhead lifting, towing or pulling.
Campbell 0713627 Ball Chain Midwest 4692 USS Flat Washer Campbell 072-3169 Handy Link Chain 175 ft
WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn. Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated For hanging fixtures and plants, animal ties. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
Midwest 4691 USS Flat Washer Campbell 099-0836 Straight Welded Single Loop Chain Campbell 099-0846 Decorator Chain
Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated Used for creating borders for flower beds, gardens, driveways, etc. DO NOT USE FOR OVERHEAD LIFTING, TOWING OR PULLING. Used for creating borders for flower beds, gardens, driveways, etc. DO NOT USE FOR OVERHEAD LIFTING, TOWING OR PULLING.
Campbell 099-0856 Decorator Chain Midwest 4690 USS Flat Washer Campbell 072-2927 Passing Link Chain
Used for creating borders for flower beds, gardens, driveways, etc. DO NOT USE FOR OVERHEAD LIFTING, TOWING OR PULLING. Midwest Flat Washer, USS, 1/4 in Nominal, Zinc Plated For general utility, farm and animal applications. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.
CHAIN 5/32IN SS 50FT REEL
CHAIN 5/32IN SS 50FT REEL
Our Price: $522.91
Uses: Marine applications, wherever non-nagnetic, electrically welded corrosion resistant chain is needed. Bright finish.
   
 
1