Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS > ANCHORS - TOGGLE BOLTS
Sort By:
1
Mintcraft JL42001 Hex and Square Nut Set Cobra 086Y Spring Toggle Bolt Mintcraft JL82110 Tack/Pushpin/Clip Set
Includes 20 each M4 and M6 hex nuts and 20 each M4 and M6 square nuts. Can be used in all types of hollow material. Includes (10) push pins, (50) thumb tacks and (15) paper clips.
Pro-Fit 0718200 Collated Nail Mintcraft JL821033L Bolt/Nut Set Cobra 054S Medium Toggle Bolt
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Bolts include (22) 6 x 3/4", (10) 8 x 1/2", (5) 8 x 5/8", (7) 10 x 1/2", (3) 10 x 1-1/4" and (3) 1/4 x 1/2". Nuts include (22) M3, (15) M4, (10) M5 and (3) M6. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant.
Cobra 052S Small Toggle Bolt Cobra 081Y Spring Toggle Bolt Cobra 082Y Spring Toggle Bolt
Made of resistant nylon with wings that expand behind drywall. Corrosion resistant. Can be used in all types of hollow material. Can be used in all types of hollow material.
Diamondback JL82101 Wood Screw Set Mintcraft JL82102 Sheet Metal Screw Set Mintcraft JL821083L Screw/Anchor Set
Includes (40) 4 x 1/2", (28) 6 x 1/2", (20) 5 x 5/8", (5) 8 x 1" and (2) 10 x 1-1/4". Set includes:  (30) 4 x 1/2", (25) 6 x 1/2", (15) 6 x 3/4", (10) 8 x 3/4", (10) 8 x 1" and (5) 10 x 1". Includes (13) 8 x 1" and (17) 6 x 1"sheet metal screws and (13) E6 and (17) E5 anchors.
Cobra 085Y Spring Toggle Bolt Cobra 096Y Spring Toggle Bolt Cobra 095Y Spring Toggle Bolt
Can be used in all types of hollow material. Can be used in all types of hollow material. Can be used in all types of hollow material.
Pro-Fit 0718201 Collated Nail Cobra 243S Double Expansion Short Lag Shield Hillman 59205 Assorted Nail Kit
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Hillman Nail Kit, Assorted, 119 Pieces
Pro-Fit 0718202 Collated Nail Cobra 211S Lead Anchor Cobra 215S Lead Anchor
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Corrosion resistant. It is internally threaded and it installs flush to surface. Corrosion resistant. It is internally threaded and it installs flush to surface.
Parasleeve 448N Sleeve Anchor Pro-Fit 0718203 Collated Nail Pro-Fit 00718230 Narrow Crown Staple
Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040.
Pro-Fit 0940041 Felt Hammer Tacker Staple SCREW ANCHOR/METAL ASST 285PC Pro-Fit 0718204 Collated Nail
Fits Bostitch: P6C-8,H30-8,PC4000,PC5000, T15,T15C,T58D4, JK:694, Prebena: HHD-10, Rapid:31. Used for insulation and roofing paper applications. Including zinc-plated steel Philips screws and poly anchors. Lead free brass waterway. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
FlipToggle 420S Toggle Bolt FlipToggle 425S Toggle Bolt Pro-Fit 0718205 Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Pro-Fit 00718228 Narrow Crown Staple Midwest 23590 Assorted Nail Kit NAIL FINISH 18GA 1IN
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Midwest Nail Kit, Assorted
Pro-Fit 0718206 Collated Nail D-RING SNAP ASSORTMENT 12PC   SPRING ASSORTMENT 200PC
SPRING ASSORTMENT 200PC
Our Price: $5.60
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Zinc Plated To Resist Rust and Corrosion. Flat and Loop Ends. Neatly Organized In A Divided PVC Storage Case With Chart Inside Box Lid For Easy Selection.
Pro-Fit 0718207 Collated Nail Pro-Fit 00718229 Narrow Crown Staple NAIL BRAD 18GA 18GA 1 IN 2.5K
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Chisel point, coated finish. smooth shank, adhesive collated.
Parawedge 503N Wedge Anchor SCREW LW-PRFL CBNT 8X1-1/4IN  Pro-Fit 712254 Collated Nail
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Senco A201009 Collated Nail Senco A201259 Collated Nail Senco A201509 Collated Nail
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
PIN-COTTER ASSORTMENT 555PC   Cobra 384V Drive Nail-In Anchor SCREW WOOD SELF-TAP ASST 240PC
Cotter Pin Assortment. Contains 6 popular sizes with a variety of prong lengths. One prong is extended for easy insertion. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Self-Tapping Wood Screw Assortment. Phillips flat head. Zinc plated carbon steel resists rust and corrosion. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Lead free brass waterway.
Pro-Fit 0289108 Interior Screw Pro-Fit 0289148 Interior Screw Pro-Fit 00718231 Narrow Crown Staple
Use for molding and trim fastened to light gauge metal studs. Use for molding and trim fastened to light gauge metal studs. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040.
Pro-Fit 0712304 Collated Nail PIN-PTO ASSORTMENT 12PC       SCREW LW-PRFL CBNT 8X1-1/2IN
PIN-PTO ASSORTMENT 12PC
Our Price: $7.11
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. High Quality Carbon Steel. For a Wide Variety of Farm, Lawn, Garden and Industrial Uses. Tempered For Spring Action. Rust and Corrosion Resistant. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
NUT/BOLT ASSORT ZINC SAE 240PC NUT/BOLT ASST BLK METRIC 240PC SCREW FIN/TRIM HEAD 8X1-1/4IN
Machined and tempered low carbon steel, Rust and corrosion resistant, Machined helical threads & Neatly organized in a divided PVC storage case with chart inside box lid for easy selection Use to replace broken, lost, or stripped nuts and bolts around the home or workshop. Lead free brass waterway. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
HITCH CLIP ASSORTMENT 150PC   STAPLE 18GA 1/4CRN 1/2IN      STAPLE NARROW CRN 18GA 1 IN
Zinc plated spring steel to resist rust and corrosion, Handy as a quick-release cotter pin substitute. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Chisel point, coated finish, adhesive collated. 1/4" crown,  bright finish.
Parawedge 502G Wedge Anchor Senco A202009 Collated Nail SCREW LW-PRFL CBNT 8X3-1/8IN
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Pro-Fit 0940042 Felt Hammer Tacker Staple LOCKNUT ASSORTMENT 150PC      Parawedge 504G Wedge Anchor
Used for insulation and roofing paper applications. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Zinc plated to resist rust Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
WASHER S/D SCRW HEX ASST 200PC STAPLE 18GA 1/4CRN 5/8IN      Senco ZX16EAANR Head Pin Nail
Self-tapping. Zinc plated carbon steel resists rust and corrosion. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection. Lead free brass waterway. Chisel point, coated finish, adhesive collated. Galvanized finish, chisel point, medium head.
Pro-Fit 00718232 Narrow Crown Staple SCREW LW-PRFL CBNT 8X1-3/4IN  NAIL FINISH 18GA 2IN
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Senco A801509 Medium Narrow Wire Staple Cobra 385V Drive Nail-In Anchor PIN-LYNCH ASSORTMENT 25PC
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Spring loaded rings to ensure a secure hold when installed. Zinc-plated to resist rust and corrosion from severe weather conditions. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection.
Senco A209809 Collated Nail STAPLE 18GA 1/4CRN3/4IN       PIN-COTTER EXT-LONG ASST 144PC
For light and medium duty jobs such as cabinet face frames, decorative trim, scribe moldings and picture frames. Fits A125BN and A200BN brad nailers. Includes 300 each 5/8", 3/4", 1" and 1-1/4". Information on nail compatibility is available online at www.senco.com. Chisel point, coated finish, adhesive collated. Extra Long Cotter Pin Assortment. Made of hardened steel. Zinc plating finish for rust resistance. Neatly organized in a divided PVC storage case with chart inside box lid for easy selection.
SCREW CAB STARHD WH 8X1-1/4IN NAIL BRAD 18GA 18GA 1-1/4 2.5K Pro-Fit 0712454 Collated Nail
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Chisel point, coated finish. smooth shank, adhesive collated. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 381V Drive Nail-In Anchor Senco A801259 Medium Narrow Wire Staple Stanley BT1300B Stick Collated Nail
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer.
SCREW CBNT STARHEAD WH 8X1-1/2 Cobra 386V Drive Nail-In Anchor STAPLE 18GA 1/4CRN 7/8IN
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Chisel point, coated finish, adhesive collated.
Stanley BT1340B Stick Collated Nail Pro-Fit 0712504 Collated Nail Cobra 383V Drive Nail-In Anchor
Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Senco A809909 Medium Narrow Wire Staple Pro-Fit 0718102 Collated Nail Senco A801009 Medium Narrow Wire Staple
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852.
NAIL BRAD 18GA 18GA 1-1/2 2.5K Stanley BT1303B Stick Collated Nail STAPLE NARROW CRN 18GA 1-1/4
Chisel point, coated finish. smooth shank, adhesive collated. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. 1/4" crown,  bright finish.
STAPLE 18GA 1/4CRN 1 IN       Stanley BT1345B Stick Collated Nail SCREW LW-PRFL CBNT 8X2IN
SCREW LW-PRFL CBNT 8X2IN
Our Price: $10.16
Chisel point, coated finish, adhesive collated. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Pro-Fit 00718233 Narrow Crown Staple Midwest 14991 Assorted Hook and Eye Kit Midwest 14993 Assorted Handyman Fastener Kit
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Durable and reusable container with assorted sizes of eye hooks, cup hooks and shoulder hooks. Contains enough items to complete multiple projects. Durable and reusable container with assorted kinds and sizes of screws, bolts, washers and nuts.
Midwest 11212 Cotter Pin Assortment Midwest 14997 Assorted Nut and Washer Kit Midwest 14994 Assorted Household Fastener Kit
Cotter pins are commonly used to retain clevis pins, sprockets, wheel axles, pulley & flywheels. Contains 120 pieces. Durable and reusable container with assorted types and sizes to complete multiple projects. Durable and reusable container with items such as picture hangers, anchors, push pins, cup hooks, nails, brads and screws.
Midwest 14999 Assorted Anchor Kit Midwest 14998 Assorted Wood and Sheet Metal Screw Kit Senco H06BAA Fine Narrow Wire Staple
Durable and reusable container with items such as anchors, toggle bolts with wings, bolts and screws. Contains enough items to complete multiple projects. Durable and reusable container with assorted types and sizes. Contains enough items to complete multiple projects. Chisel  point. Applications: Insulation, Vapor Barriers and Felt Roofing.
Pro-Fit 0712554 Collated Nail Cobra 085M Spring Toggle Bolt Senco A301500 Angled Strip Collated Finish Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Can be used in all types of hollow material. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com.
STAPLE 18GA 1/4CRN 1-1/4 IN   Midwest 14995 Assorted Nail/Tack/Brad Kit Stanley BT1309B Stick Collated Nail
Chisel point, coated finish, adhesive collated. Durable and reusable container with multiple sizes nails, tacks and brads. Contains enough items to complete multiple projects. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer.
REDHEAD WEDGE ANCHOR 1/4X2-1/4 Parawedge 491R Wedge Anchor NAIL BRAD 18GA 18GA 1-3/4 2.5K
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Chisel point, coated finish. smooth shank, adhesive collated.
Senco A800759 Medium Narrow Wire Staple Stanley BT1350B Stick Collated Nail STAPLE 18GA 1/4CRN 1-1/2 IN
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Chisel point, coated finish, adhesive collated.
SCREW FIN/TRIM HEAD WHT 8X2IN Pro-Fit 712604 Collated Nail Senco A302000 Angled Strip Collated Finish Nail
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com.
NAIL BRAD 18GA 18GA 2IN 2.5K  Cobra 082M Spring Toggle Bolt Senco A301750 Angled Strip Collated Finish Nail
Chisel point, coated finish. smooth shank, adhesive collated. Can be used in all types of hollow material. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com.
Stanley BT1314B Stick Collated Nail Cobra 081M Spring Toggle Bolt SCREW LW-PRFL CBNT 8X2-1/2IN
Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Can be used in all types of hollow material. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Red Head 50126 Drop-In Anchor SCREW FIN/TRIM HEAD 8X2-3/4IN Senco A302500 Angled Strip Collated Finish Nail
For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com.
FlipToggle 420R Toggle Bolt Pro-Fit 0712375 Collated Nail Pro-Fit 0712450 Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 086M Spring Toggle Bolt Stanley BT1335B Stick Collated Nail FlipToggle 425R Toggle Bolt
Can be used in all types of hollow material. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
Pro-Fit 712250 Collated Nail Acorn SW-MW1G250 Self-Tapping Screw SCREW CAB STARHD WH 8X2-1/2IN
Information on nail compatibility is available online at www.nationalnail.com. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
SCREW CABINET 8X2-3/4IN       Pro-Fit 0718104 Collated Nail Red Head 11019 Wedge Anchor
SCREW CABINET 8X2-3/4IN
Our Price: $13.97
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Senco ZX10EAA Head Pin Nail Acorn SW-SS1234G250 Stitch Self-Tapping Screw Pro-Fit 0712300 Collated Nail
Galvanized finish, chisel point, medium head. Metal to metal sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screws join laps and stitch corner and rake trims and the ridge cap where they overlap steel. A 5/16? across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Information on nail compatibility is available online at www.nationalnail.com.
Pro-Fit 0718105 Collated Nail Pro-Fit 0712500 Collated Nail Senco A302509 Collated Finish Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.senco.com.
Senco AX10EAA Collated Nail Senco AX15EAA Collated Nail Red Head 50125 Drop-In Anchor
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
Senco A800629 Medium Narrow Wire Staple Senco AX13EAA Collated Nail Pro-Fit 0718103 Stick Collated Nail
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Acorn SW-MW15G250 Self-Tapping Screw Red Head 35303 Hammer Set Anchor Senco AX17EAA Collated Nail
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Pro-Fit 00718131 Narrow Crown Staple NAIL METAL BRT .148X1-1/2     Red Head 35305 Hammer Set Anchor
NAIL METAL BRT .148X1-1/2
Our Price: $16.36
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes.
Pro-Fit 0718101 Collated Nail Senco ZX13EAA Head Pin Nail SCREW MTL SIDING WH 9X1-1/2IN
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Galvanized finish, chisel point, medium head. This screw has an integrated washer-head and is complimented by a rubber washer below the screw head.
Pro-Fit 0718106 Stick Collated Nail Acorn SW-MW1BR Self-Tapping Screw Acorn SW-MW1FG250 Self-Tapping Screw
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1BN Self-Tapping Screw Acorn SW-MW1W250 Self-Tapping Screw Acorn SW-MW1LG250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1LS250 Self-Tapping Screw Acorn SW-MW1TP250 Self-Tapping Screw Acorn SW-MW1MT250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1BS250 Self-Tapping Screw Acorn SW-MW1BW250 Self-Tapping Screw Acorn SW-MW1CG250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1CR250 Self-Tapping Screw Acorn SW-MW1BG250 Self-Tapping Screw Acorn SW-MW1BK250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1BL250 Self-Tapping Screw Parasleeve 447M Sleeve Anchor Senco L11BAB Medium Crown Staple
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852.
REDHEAD WEDGE ANCHOR 5/8X5 10P Acorn SW-MW2G250 Self-Tapping Screw NAIL METAL GALV .131X1-1/2
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
FlipToggle 420M Toggle Bolt Pro-Fit 00718132 Narrow Crown Staple Pro-Fit 0718107 Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Acorn SW-MW15BN250 Self-Tapping Screw Acorn SW-MW15BS250 Self-Tapping Screw Acorn SW-MW15W250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW15TP250 Self-Tapping Screw Acorn SW-MW15CG250 Self-Tapping Screw Acorn SW-MW15BR250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW15BW250 Self-Tapping Screw Acorn SW-MW15BK250 Self-Tapping Screw Acorn SW-MW15BL250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW15BG250 Self-Tapping Screw Acorn SW-MW15LG250 Self-Tapping Screw Acorn SW-MW15FG250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW15CR250 Self-Tapping Screw Acorn SW-MW15MT250 Self-Tapping Screw Acorn SW-MW15LS250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
STAPLE GALV 16GA 3/4CRN  3/4  FlipToggle 425M Toggle Bolt Senco L12BAB Medium Narrow Wire Staple
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852.
Red Head 02041 Wedge Anchor Pro-Fit 712600 Collated Nail Senco AX18EAA Collated Nail
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Information on nail compatibility is available online at www.nationalnail.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Midwest 04085 Toggle Bolt Stanley SX5035-3/4G Narrow Finish Staple Acorn SW-MW25G250 Self-Tapping Screw
Midwest Toggle Bolt, Round Head, 1/8 in Anchor, 2 in Anchor, Drill Bit Size 3/8 in, Zinc Plated, With Wings Fits: Bostitch S32SX, T40 SX-CT, SB-150SX, SB-2IN1 and SB150SX-HD. Rental. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Senco ZX16EAA Head Pin Nail STAPLE GALV 16GA GALV I IN