Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS
Choose a sub category:
ANCHORS - TOGGLE BOLTS ANCHORS - HOLLOW WALL ANCHORS - MASONRY
Sort By:
1
Twist-N-Lock 11364 Drywall Anchor Twist-N-Lock 11353 Light Duty Drywall Anchor Stud Solver 29503 Hollow Wall Anchor
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness: 3/4". #6 x 1-1/4"sheet metal screw. Accommodates loads up to 50 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks. Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Cobra 086Y Spring Toggle Bolt Cobra 054S Medium Toggle Bolt Cobra 052S Small Toggle Bolt
Can be used in all types of hollow material. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant.
Cobra 081Y Spring Toggle Bolt Cobra 082Y Spring Toggle Bolt Cobra 085Y Spring Toggle Bolt
Can be used in all types of hollow material. Can be used in all types of hollow material. Can be used in all types of hollow material.
Cobra 163Y Special Short Drive Hollow Wall Anchor Cobra 096Y Spring Toggle Bolt Cobra 095Y Spring Toggle Bolt
Simply taps into drywall, no pre-drilling, vibration resistant. Can be used in all types of hollow material. Can be used in all types of hollow material.
Walldriller 016S Hollow Wall Anchor Cobra 243S Double Expansion Short Lag Shield Triplegrip 171S Wall Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Cobra Anchors 173S Wall Anchor Cobra 133Y Long Hollow Wall Anchor Triplegrip 170S Wall Anchor
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Triplegrip 172S Wall Anchor Cobra 132Y Short Hollow Wall Anchor Cobra 137Y Short Hollow Wall Anchor
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 131Y Extra Short Hollow Wall Anchor Cobra 162Y Long Drive Hollow Wall Anchor Cobra 161Y Short Drive Hollow Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Simply taps into drywall, no pre-drilling, vibration resistant. Simply taps into drywall, no pre-drilling, vibration resistant.
Walldriller 034S Hollow Wall Anchor Cobra 211S Lead Anchor Cobra 185S Screw Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Corrosion resistant. It is internally threaded and it installs flush to surface. Notched wings prevent rotation in wall.
Walldriller 022S Hollow Long Wall Anchor Walldriller 024S Hollow Long Wall Anchor Cobra 187S Screw Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Notched wings prevent rotation in wall.
Cobra 215S Lead Anchor Cobra 197S Screw Anchor Cobra 141Y Short Hollow Wall Anchor
Corrosion resistant. It is internally threaded and it installs flush to surface. Notched wings prevent rotation in wall. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 138Y Long Hollow Wall Anchor Cobra Anchors WallDriller Hollow Long Wall Anchor Cobra 193S Screw Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Notched wings prevent rotation in wall.
Wallgripper 750S Wall Anchor Parasleeve 448N Sleeve Anchor Walldriller 016R Hollow Wall Anchor
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Walldriller 042S Hollow Long Wall Anchor FlipToggle 420S Toggle Bolt FlipToggle 425S Toggle Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
Walldriller 029R Hollow Long Wall Anchor Wallgripper 753S Wall Anchor Cobra Anchors WallGripper Hollow Wall Anchor With Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Walldriller 034R Hollow Wall Anchor Cobra Anchors DrillerToggle Wall Anchor With Bolt Drillertoggle 363S Hollow Wall Anchor With Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Cobra 197R Screw Anchor Cobra 193R Screw Anchor Parawedge 503N Wedge Anchor
Notched wings prevent rotation in wall. Notched wings prevent rotation in wall. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Drillertoggle 367S Hollow Wall Anchor With Bolt SCREW LW-PRFL CBNT 8X1-1/4IN  Walldriller 042R Hollow Long Wall Anchor
Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Cobra 384V Drive Nail-In Anchor Pro-Fit 0289108 Interior Screw Pro-Fit 0289148 Interior Screw
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Use for molding and trim fastened to light gauge metal studs. Use for molding and trim fastened to light gauge metal studs.
Triplegrip 171R Wall Anchor Cobra Anchors 172R Wall Anchor SCREW LW-PRFL CBNT 8X1-1/2IN
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
SCREW FIN/TRIM HEAD 8X1-1/4IN Cobra 187R Screw Anchor Triplegrip 170R Wall Anchor
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Notched wings prevent rotation in wall. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Teks 21500 Lathe Screw Teks 21512 Lathe Screw Teks 21516 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21504 Lathe Screw Teks 21508 Lathe Screw Parawedge 502G Wedge Anchor
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
SCREW LW-PRFL CBNT 8X3-1/8IN  Parawedge 504G Wedge Anchor Triplegrip 173R Wall Anchor
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Teks 21532 Lathe Screw Teks 21520 Lathe Screw Teks 21528 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21536 Lathe Screw Teks 21524 Lathe Screw Senco M001001 Collated Finish Nail
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. Information on nail compatibility is available online at www.senco.com.
SCREW LW-PRFL CBNT 8X1-3/4IN  Pro-Fit 0635074 Collated Finish Nail Cobra 385V Drive Nail-In Anchor
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Cobra Anchors DrillerToggle Wall Anchor With Bolt Wallgripper 750R Wall Anchor SCREW CAB STARHD WH 8X1-1/4IN
Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Senco A402009 Collated Finish Nail Pro-Fit 0635094 Collated Finish Nail Cobra 381V Drive Nail-In Anchor
Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Senco M001002 Collated Finish Nail SCREW CBNT STARHEAD WH 8X1-1/2 Cobra 386V Drive Nail-In Anchor
Information on nail compatibility is available online at www.senco.com. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Walldriller 028L Hollow Long Wall Anchor Walldriller 027L Anchor Kit NAIL FINISH ANGLE 15G 1.25INCH
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Arrow Finishing Nail, 15 ga, 1-1/4 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer
Senco M001003 Collated Finish Nail Cobra 383V Drive Nail-In Anchor Pro-Fit 635134 Collated Finish Nail
Information on nail compatibility is available online at www.senco.com. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
SCREW LW-PRFL CBNT 8X2IN      Senco M001004 Collated Finish Nail Cobra 085M Spring Toggle Bolt
SCREW LW-PRFL CBNT 8X2IN
Our Price: $10.16
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Information on nail compatibility is available online at www.senco.com. Can be used in all types of hollow material.
Walldriller 021M Hollow Long Wall Anchor Drillertoggle 364R Hollow Wall Anchor With Bolt Triplegrip 172M Wall Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
REDHEAD WEDGE ANCHOR 1/4X2-1/4 Parawedge 491R Wedge Anchor Senco M001005 Collated Finish Nail
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Information on nail compatibility is available online at www.senco.com.
SCREW FIN/TRIM HEAD WHT 8X2IN Triplegrip 171M Wall Anchor Triplegrip 170M Wall Anchor
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Teks 21412 Roofing Screw Teks 21416 Roofing Screw Teks 21404 Roofing Screw
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal  (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction. Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal  (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction. Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal  (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
Teks 21400 Roofing Screw NAIL FINISH ANGLE 15G 1.5INCH Teks 21408 Roofing Screw
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal  (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction. Arrow Finishing Nail, 15 ga, 1-1/2 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal  (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
Dewalt DCS16150 Collated Finish Nail Pro-Fit 635154 Collated Finish Nail Stanley SB16-1.25-1M Stick Collated Finish Nail
Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 1-1/2 in Length, Brad Head, Adhesive Straight Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.bostitch.com.
Cobra 082M Spring Toggle Bolt Cobra 081M Spring Toggle Bolt SCREW LW-PRFL CBNT 8X2-1/2IN
Can be used in all types of hollow material. Can be used in all types of hollow material. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Red Head 50126 Drop-In Anchor Twist-N-Lock 25310 Drywall Anchor Senco M001007 Collated Finish Nail
For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Information on nail compatibility is available online at www.senco.com.
SCREW FIN/TRIM HEAD 8X2-3/4IN NAIL FINISH 16GA 1-1/2        Stanley SB16-1.5-1M Stick Collated Finish Nail
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Information on nail compatibility is available online at www.bostitch.com.
NAIL FINISH 16GA 2IN          FlipToggle 420R Toggle Bolt Triplegrip 173M Wall Anchor
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
NAIL FINISH 16GA STR 1-3/4    Senco A302009 Collated Finish Nail Cobra 086M Spring Toggle Bolt
Adhesive collated, coated finish. Information on nail compatibility is available online at www.senco.com. Can be used in all types of hollow material.
Walldriller 041M Hollow Long Wall Anchor Pro-Fit 603054 Collated Finish Nail FlipToggle 425R Toggle Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
NAIL FINISH ANGLE 15G 1.75INCH Pro-Fit 603074 Collated Finish Nail SCREW CAB STARHD WH 8X2-1/2IN
Arrow Finishing Nail, 15 ga, 1-3/4 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
SCREW CABINET 8X2-3/4IN       Red Head 11019 Wedge Anchor Red Head 50125 Drop-In Anchor
SCREW CABINET 8X2-3/4IN
Our Price: $13.97
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
Pro-Fit 603094 Collated Finish Nail NAIL FINISH ANGLE 15G 2 INCH  Stud Solver 25316 Hollow Wall Anchor
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Arrow Finishing Nail, 15 ga, 2 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Stanley SB16-1.75-1M Stick Collated Finish Nail Red Head 35303 Hammer Set Anchor Red Head 35305 Hammer Set Anchor
Information on nail compatibility is available online at www.bostitch.com. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes.
Pro-Fit 603114 Collated Finish Nail Walldriller 013M Hollow Wall Anchor Stanley SB16-2.00-1M Stick Collated Finish Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Information on nail compatibility is available online at www.bostitch.com.
Parasleeve 447M Sleeve Anchor Wallgripper 750M Wall Anchor Walldriller 033M Hollow Wall Anchor
Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
SCREW LATH SHARP PT NO8 X3/4IN SCREW LATH SHARP PT NO8 X 1IN NAIL FINISH ANGLE 15G 2.5INCH
Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Arrow Finishing Nail, 15 ga, 2-1/2 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: 15GPT Pneumatic Angled Nailer
Triplegrip 172T Wall Anchor REDHEAD WEDGE ANCHOR 5/8X5 10P Pro-Fit 603134 Collated Finish Nail
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Acorn SW-MM121G250 Self-Tapping Screw Senco RH15EAA Collated Finish Nail Stanley SB16-2.5-1M Stick Collated Finish Nail
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. T-head, chisel point, galvanized finish, Information on nail compatibility is available online at www.bostitch.com.
FlipToggle 420M Toggle Bolt FlipToggle 425M Toggle Bolt Simpson Strong-tie T18N075FNB Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Information on nail compatibility is available online at www.strongtie.com.
Dewalt DCS16200 Collated Finish Nail Red Head 02041 Wedge Anchor Walldriller 013T Hollow Wall Anchor
Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 2 in Length, Brad Head, Adhesive Straight Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Midwest 04085 Toggle Bolt Stanley FLN150 L Cleat Collated Flooring Nail SCREW LATH DRILL PT NO8 X3/4IN
Midwest Toggle Bolt, Round Head, 1/8 in Anchor, 2 in Anchor, Drill Bit Size 3/8 in, Zinc Plated, With Wings Fits Stanley-Bostitch flooring nailer No.HFN1, MIIIFN, MFN200. Also fits: Porter-Cable: FCN200, Powernail: 345, 45, Primatech: P210, H300, H330, Q500, Senco: SHF50, SHF15, SHF10. Rental. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed.
SCREW LATH DRILL PT NO8 X 1IN Pro-Fit 603154 Collated Finish Nail Stanley FLN200 L Cleat Collated Flooring Nail
Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fits Stanley-Bostitch flooring nailer No.HFN1, MIIIFN, MFN200. Also fits: Porter-Cable: FCN200, Powernail: 345, 45, Primatech: P210, H300, H330, Q500, Senco: SHF50, SHF15, SHF10. Rental.
Stanley SB16-150 Stick Collated Finish Nail Walldriller 021T Hollow Long Wall Anchor Senco RH21EAA Collated Finish Nail
Information on nail compatibility is available online at www.bostitch.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. T-head, chisel point, galvanized finish,
NAIL FINISH 15GA 1-1/2IN 2.5K Acorn SW-MM1212G250 Self-Tapping Screw Senco RW19BPE L Cleat Collated Flooring Nail
Chisel point, adhesive collated, Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Fits: Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Superior FCN50, Duo-Fast FloorMaster 200-C, and other L cleat nailers.
Dewalt DCS16250 Collated Finish Nail Acorn SW-L1478G250 Lap Self-Tapping Screw Midwest 04086 Toggle Bolt
Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 2-1/2 in Length, Brad Head, Adhesive Straight Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Metal to metal sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screws have a #3 drill point and are designed for 26 gauge and heavier metal to join laps and to stitch corner and rake trims and the ridge cap where they overlap wall steel. A 5/16" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Midwest Toggle Bolt, Round Head, 1/8 in Anchor, 3 in Anchor, Drill Bit Size 3/8 in, Zinc Plated, With Wings
Dewalt DCA16150 Collated Finish Nail Red Head 11272 Wedge Anchor NAIL FINISH 15GA 2IN 2.5K
Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 1-1/2 in Length, Brad Head, 20 deg Collation, Angled Strip Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Chisel point, adhesive collated,
Senco RW21BPE L Cleat Collated Flooring Nail Acorn SW-MM141G250 Self-Tapping Screw Red Head 11273 Wedge Anchor
Fits: Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Superior FCN50, Duo-Fast FloorMaster 200-C, and other L cleat nailers. Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Red Head 02014 Wedge Anchor NAIL FINISH 15GA 2-1/2 ANGL   Stanley SB16-200 Stick Collated Finish Nail
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Chisel point, adhesive collated, Information on nail compatibility is available online at www.bostitch.com.
Dewalt DCA16200 Collated Finish Nail Red Head 11270 Wedge Anchor SCREW ROOF S-POINT HWH NO9X1IN
Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 2 in Length, Brad Head, 20 deg Collation, Angled Strip Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
SCREW ROOFING HWH DP NO12X2IN Pro-Fit 0289104 Interior Screw REDHEAD WEDGE ANCHOR 3/4X5.5IN
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed. Use for molding and trim fastened to light gauge metal studs. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Midwest 04089 Toggle Bolt Red Head 11021 Wedge Anchor REDHEAD WEDGE ANCHOR 5/8X7 10P
Midwest Toggle Bolt, Round Head, 3/16 in Anchor, 3 in Anchor, Drill Bit Size 1/2 in, Zinc Plated, With Wings Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Midwest 04133 Wedge Anchor Dewalt DCA16250 Collated Finish Nail Midwest 04090 Toggle Bolt
Midwest Wedge Anchor, Heavy Duty, 5/8 in Anchor, 3-1/2 in Anchor, Zinc Plated Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 2-1/2 in Length, Brad Head, 20 deg Collation, Angled Strip Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Midwest Toggle Bolt, Round Head, 3/16 in Anchor, 4 in Anchor, Drill Bit Size 1/2 in, Zinc Plated, With Wings
Acorn SW-MM1412G250 Self-Tapping Screw Midwest 04093 Toggle Bolt Pro-Fit 0330004 Self-Drilling Screw
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Midwest Toggle Bolt, Round Head, 1/4 in Anchor, 3 in Anchor, Drill Bit Size 5/8 in, Zinc Plated, With Wings Metal to metal fastening 16 to 20 gauge.
Simpson Strong-tie T16N150FNB Collated Finish Nail Midwest 04094 Toggle Bolt Walldriller 041T Hollow Long Wall Anchor
Information on nail compatibility is available online at www.strongtie.com. Midwest Toggle Bolt, Round Head, 1/4 in Anchor, 4 in Anchor, Drill Bit Size 5/8 in, Zinc Plated, With Wings Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley SB16-250 Stick Collated Finish Nail NAIL FINISH 15GA 2IN 2.5K GALV Senco DA15EPBN Collated Finish Nail
Information on nail compatibility is available online at www.bostitch.com. Chisel point, adhesive collated, Information on nail compatibility is available online at www.senco.com.
Pro-Fit 0289144 Interior Screw Simpson Strong-tie T16N200FNB Collated Finish Nail Stanley FN1520 Stick Collated Finish Nail
Use for molding and trim fastened to light gauge metal studs. Information on nail compatibility is available online at www.strongtie.com. Information on nail compatibility is available online at www.bostitch.com.
Senco DA17EPBN Collated Finish Nail SCREW ROOFING HWH NO9 X1-1/2IN SCREW ROOFING HWH NO12X1-1/2IN
Information on nail compatibility is available online at www.senco.com. Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed. Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
Pro-Fit 603090 Collated Finish Nail Pro-Fit 0635090 Collated Finish Nail Senco DA25EPB Collated Finish Nail