Home > FASTENERS > NUTS, BOLTS, SCREWS > SCREWS > INTERIOR MOLDING/TRIM SCREW
Sort By:
1
Twist-N-Lock 11364 Drywall Anchor Twist-N-Lock 11353 Light Duty Drywall Anchor Stud Solver 29503 Hollow Wall Anchor
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness: 3/4". #6 x 1-1/4"sheet metal screw. Accommodates loads up to 50 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks. Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Cobra 133Y Long Hollow Wall Anchor Cobra 137Y Short Hollow Wall Anchor Cobra 086Y Spring Toggle Bolt
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Can be used in all types of hollow material.
Cobra 138Y Long Hollow Wall Anchor Cobra 054S Medium Toggle Bolt Cobra 081Y Spring Toggle Bolt
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Made of resistant nylon with wings that expand behind drywall. Corrosion resistant. Can be used in all types of hollow material.
Pro-Fit 0718200 Collated Nail Cobra 082Y Spring Toggle Bolt Cobra 163Y Special Short Drive Hollow Wall Anchor
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Can be used in all types of hollow material. Simply taps into drywall, no pre-drilling, vibration resistant.
Cobra 085Y Spring Toggle Bolt Cobra 096Y Spring Toggle Bolt Cobra 095Y Spring Toggle Bolt
Can be used in all types of hollow material. Can be used in all types of hollow material. Can be used in all types of hollow material.
Cobra 243S Double Expansion Short Lag Shield Walldriller 016S Hollow Wall Anchor Pro-Fit 0718201 Collated Nail
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 132Y Short Hollow Wall Anchor Cobra 131Y Extra Short Hollow Wall Anchor Cobra 162Y Long Drive Hollow Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Simply taps into drywall, no pre-drilling, vibration resistant.
Cobra 161Y Short Drive Hollow Wall Anchor Walldriller 034S Hollow Wall Anchor Cobra 052S Small Toggle Bolt
Simply taps into drywall, no pre-drilling, vibration resistant. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant.
Cobra 211S Lead Anchor Triplegrip 171S Wall Anchor Cobra Anchors 173S Wall Anchor
Corrosion resistant. It is internally threaded and it installs flush to surface. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Cobra 185S Screw Anchor Pro-Fit 0718202 Collated Nail Walldriller 022S Hollow Long Wall Anchor
Notched wings prevent rotation in wall. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Triplegrip 170S Wall Anchor Walldriller 024S Hollow Long Wall Anchor Triplegrip 172S Wall Anchor
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Cobra 187S Screw Anchor Cobra 215S Lead Anchor Cobra 141Y Short Hollow Wall Anchor
Notched wings prevent rotation in wall. Corrosion resistant. It is internally threaded and it installs flush to surface. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 197S Screw Anchor Parasleeve 448N Sleeve Anchor Cobra Anchors WallDriller Hollow Long Wall Anchor
Notched wings prevent rotation in wall. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Walldriller 016R Hollow Wall Anchor Wallgripper 750S Wall Anchor Pro-Fit 0718203 Collated Nail
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Walldriller 042S Hollow Long Wall Anchor Pro-Fit 00718230 Narrow Crown Staple Cobra 193S Screw Anchor
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Notched wings prevent rotation in wall.
Pro-Fit 0940041 Felt Hammer Tacker Staple Pro-Fit 0718204 Collated Nail Walldriller 029R Hollow Long Wall Anchor
Fits Bostitch: P6C-8,H30-8,PC4000,PC5000, T15,T15C,T58D4, JK:694, Prebena: HHD-10, Rapid:31. Used for insulation and roofing paper applications. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
FlipToggle 420S Toggle Bolt FlipToggle 425S Toggle Bolt Walldriller 034R Hollow Wall Anchor
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Wallgripper 753S Wall Anchor Cobra Anchors WallGripper Hollow Wall Anchor With Bolt Pro-Fit 0718205 Collated Nail
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Pro-Fit 00718228 Narrow Crown Staple NAIL FINISH 18GA 1IN          Pro-Fit 0718206 Collated Nail
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra Anchors DrillerToggle Wall Anchor With Bolt NAIL BRAD 18GA 18GA 1 IN 2.5K Pro-Fit 0718207 Collated Nail
Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Chisel point, coated finish. smooth shank, adhesive collated. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Pro-Fit 00718229 Narrow Crown Staple SCREW LW-PRFL CBNT 8X1-1/4IN  Walldriller 042R Hollow Long Wall Anchor
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Cobra 384V Drive Nail-In Anchor Pro-Fit 712254 Collated Nail Senco A201009 Collated Nail
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Senco A201259 Collated Nail Senco A201509 Collated Nail Drillertoggle 363S Hollow Wall Anchor With Bolt
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Senco ZX10EAANR Head Pin Nail Cobra 187R Screw Anchor SCREW LW-PRFL CBNT 8X1-1/2IN
Galvanized finish, chisel point, medium head. Notched wings prevent rotation in wall. Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip.
Parawedge 502G Wedge Anchor Pro-Fit 0289108 Interior Screw Pro-Fit 0289148 Interior Screw
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Use for molding and trim fastened to light gauge metal studs. Use for molding and trim fastened to light gauge metal studs.
Pro-Fit 00718231 Narrow Crown Staple Triplegrip 171R Wall Anchor Pro-Fit 0712304 Collated Nail
Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra Anchors 172R Wall Anchor Cobra 197R Screw Anchor Parawedge 504G Wedge Anchor
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Notched wings prevent rotation in wall. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
SCREW LW-PRFL CBNT 8X3-1/8IN  Triplegrip 170R Wall Anchor Parawedge 503N Wedge Anchor
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Cobra 185R Screw Anchor STAPLE 18GA 1/4CRN 1/2IN      Cobra 193R Screw Anchor
Notched wings prevent rotation in wall. Chisel point, coated finish, adhesive collated. Notched wings prevent rotation in wall.
STAPLE NARROW CRN 18GA 1 IN   Drillertoggle 367S Hollow Wall Anchor With Bolt Senco A202009 Collated Nail
1/4" crown,  bright finish. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Cobra 385V Drive Nail-In Anchor NAIL FINISH 18GA 2IN          Pro-Fit 0940042 Felt Hammer Tacker Staple
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Used for insulation and roofing paper applications.
SCREW LW-PRFL CBNT 8X1-3/4IN  Triplegrip 173R Wall Anchor STAPLE 18GA 1/4CRN 5/8IN
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Chisel point, coated finish, adhesive collated.
Senco ZX16EAANR Head Pin Nail Pro-Fit 00718232 Narrow Crown Staple Senco ZX18EAANR Head Pin Nail
Galvanized finish, chisel point, medium head. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Galvanized finish, chisel point, medium head.
Cobra 381V Drive Nail-In Anchor Senco A801509 Medium Narrow Wire Staple NAIL BRAD 18GA 18GA 1-1/4 2.5K
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Chisel point, coated finish. smooth shank, adhesive collated.
Senco ZX21EAANR Head Pin Nail Senco A209809 Collated Nail Wallgripper 750R Wall Anchor
Galvanized finish, chisel point, medium head. For light and medium duty jobs such as cabinet face frames, decorative trim, scribe moldings and picture frames. Fits A125BN and A200BN brad nailers. Includes 300 each 5/8", 3/4", 1" and 1-1/4". Information on nail compatibility is available online at www.senco.com. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
STAPLE 18GA 1/4CRN3/4IN       Stanley BT1300B Stick Collated Nail Cobra 386V Drive Nail-In Anchor
Chisel point, coated finish, adhesive collated. Information on nail compatibility is available online at www.bostitch.com. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Walldriller 028L Hollow Long Wall Anchor Pro-Fit 0712454 Collated Nail Walldriller 027L Anchor Kit
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley BT1340B Stick Collated Nail Senco A801259 Medium Narrow Wire Staple Cobra Anchors DrillerToggle Wall Anchor With Bolt
Information on nail compatibility is available online at www.bostitch.com. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Cobra 383V Drive Nail-In Anchor STAPLE 18GA 1/4CRN 7/8IN      Stanley BT1303B Stick Collated Nail
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Chisel point, coated finish, adhesive collated. Information on nail compatibility is available online at www.bostitch.com.
NAIL BRAD 18GA 18GA 1-1/2 2.5K Stanley BT1345B Stick Collated Nail Pro-Fit 0712504 Collated Nail
Chisel point, coated finish. smooth shank, adhesive collated. Information on nail compatibility is available online at www.bostitch.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 085M Spring Toggle Bolt Senco A809909 Medium Narrow Wire Staple Walldriller 021M Hollow Long Wall Anchor
Can be used in all types of hollow material. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
SCREW LW-PRFL CBNT 8X2IN      Pro-Fit 0718102 Collated Nail Senco A801009 Medium Narrow Wire Staple
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852.
STAPLE NARROW CRN 18GA 1-1/4  STAPLE 18GA 1/4CRN 1 IN       Parawedge 491R Wedge Anchor
1/4" crown,  bright finish. Chisel point, coated finish, adhesive collated. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Stanley BT1309B Stick Collated Nail Pro-Fit 00718233 Narrow Crown Staple Senco H06BAA Fine Narrow Wire Staple
Information on nail compatibility is available online at www.bostitch.com. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Chisel  point. Applications: Insulation, Vapor Barriers and Felt Roofing.
Pro-Fit 0712554 Collated Nail Stanley BT1350B Stick Collated Nail NAIL BRAD 18GA 18GA 1-3/4 2.5K
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.bostitch.com. Chisel point, coated finish. smooth shank, adhesive collated.
Senco A301500 Angled Strip Collated Finish Nail STAPLE 18GA 1/4CRN 1-1/4 IN   Cobra 082M Spring Toggle Bolt
Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. Chisel point, coated finish, adhesive collated. Can be used in all types of hollow material.
NAIL BRAD 18GA 18GA 2IN 2.5K  Triplegrip 172M Wall Anchor Cobra 081M Spring Toggle Bolt
Chisel point, coated finish. smooth shank, adhesive collated. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Can be used in all types of hollow material.
ANCHOR WEDGE 1/4X2-1/4IN 25PK Stanley BT1314B Stick Collated Nail Senco A800759 Medium Narrow Wire Staple
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Information on nail compatibility is available online at www.bostitch.com. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852.
STAPLE 18GA 1/4CRN 1-1/2 IN   Pro-Fit 712604 Collated Nail Triplegrip 171M Wall Anchor
Chisel point, coated finish, adhesive collated. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Triplegrip 170M Wall Anchor Senco A302000 Angled Strip Collated Finish Nail Drillertoggle 364R Hollow Wall Anchor With Bolt
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
SCREW LW-PRFL CBNT 8X2-1/2IN  Senco A301750 Angled Strip Collated Finish Nail Red Head 50126 Drop-In Anchor
Concealed low profile washer head. T-15 star bit included. AC257 treated lumber approved. Zero stripping recessed star drive. Washer head to increase holding. Low torque W-Cut thread. No pre-drilling Engineered Zip-Tip. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
Cobra 086M Spring Toggle Bolt Twist-N-Lock 25310 Drywall Anchor Stanley BT1335B Stick Collated Nail
Can be used in all types of hollow material. Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Information on nail compatibility is available online at www.bostitch.com.
Walldriller 041M Hollow Long Wall Anchor Senco A302500 Angled Strip Collated Finish Nail FlipToggle 420R Toggle Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
Triplegrip 173M Wall Anchor Pro-Fit 0712375 Collated Nail Pro-Fit 0712450 Collated Nail
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com.
FlipToggle 425R Toggle Bolt Pro-Fit 712250 Collated Nail Pro-Fit 0718104 Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Red Head 11019 Wedge Anchor Senco ZX10EAA Head Pin Nail Pro-Fit 0712300 Collated Nail
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Galvanized finish, chisel point, medium head. Information on nail compatibility is available online at www.nationalnail.com.
Pro-Fit 0718105 Collated Nail Pro-Fit 0712500 Collated Nail Senco A302509 Collated Finish Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.senco.com.
Senco AX10EAA Collated Nail Senco AX15EAA Collated Nail Red Head 50125 Drop-In Anchor
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures.
Senco A800629 Medium Narrow Wire Staple Senco AX13EAA Collated Nail Pro-Fit 0718103 Stick Collated Nail
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Stud Solver 25316 Hollow Wall Anchor Parasleeve 447M Sleeve Anchor Walldriller 013M Hollow Wall Anchor
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Senco AX17EAA Collated Nail Pro-Fit 00718131 Narrow Crown Staple Walldriller 033M Hollow Wall Anchor
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Pro-Fit 0718101 Collated Nail Senco ZX13EAA Head Pin Nail Pro-Fit 0718106 Stick Collated Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Galvanized finish, chisel point, medium head. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Red Head 35303 Hammer Set Anchor Senco L11BAB Medium Crown Staple Wallgripper 750M Wall Anchor
For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Red Head 35305 Hammer Set Anchor Triplegrip 172T Wall Anchor ANCHOR WEDGE 5/8IN X 5IN 10PK
For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
FlipToggle 420M Toggle Bolt Pro-Fit 00718132 Narrow Crown Staple Pro-Fit 0718107 Collated Nail
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Used for subflooring and trim applications. FITS: Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40, Grex BS 5032 Stapler, Griprite GRPSN150, Haubold PN6040H, Hitachi N3804A, Hitachi N3804AA, Hitachi N3804AB, Interchange ICB SF 9040B, Makita AT 638, Omer 90/38, Omer 90/40, Porter Cable NS150, Porter Cable NSS150, Prebena 2P E 40 S 90, Prebena 3M E 50 PR, PrimeAIr SN 150, Senco Finish Pro, Senco LN4450, Senco SKS15, Senco SLS 25 XP, Senco SLS18, Spotnails HL 3852, Spotnails TRL 3852, Spotnails TS4825, Spotnails WS 4840W2, Supco 9040. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Walldriller 013T Hollow Wall Anchor STAPLE GALV 16GA 3/4CRN  3/4  FlipToggle 425M Toggle Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
Senco L12BAB Medium Narrow Wire Staple Red Head 02041 Wedge Anchor Walldriller 021T Hollow Long Wall Anchor
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Pro-Fit 712600 Collated Nail Senco AX18EAA Collated Nail Midwest 04085 Toggle Bolt
Information on nail compatibility is available online at www.nationalnail.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Midwest Toggle Bolt, Round Head, 1/8 in Anchor, 2 in Anchor, Drill Bit Size 3/8 in, Zinc Plated, With Wings
Stanley FLN150 L Cleat Collated Flooring Nail Stanley SX5035-3/4G Narrow Finish Staple Senco ZX16EAA Head Pin Nail
Fits Stanley-Bostitch flooring nailer No.HFN1, MIIIFN, MFN200. Also fits: Porter-Cable: FCN200, Powernail: 345, 45, Primatech: P210, H300, H330, Q500, Senco: SHF50, SHF15, SHF10. Rental. Fits: Bostitch S32SX, T40 SX-CT, SB-150SX, SB-2IN1 and SB150SX-HD. Rental. Galvanized finish, chisel point, medium head.
STAPLE GALV 16GA GALV I IN    Stanley SX5035-5/8G Narrow Finish Staple Stanley FLN200 L Cleat Collated Flooring Nail
Fits: Bostitch S32SX, T40 SX-CT, SB-150SX, SB-2IN1 and SB150SX-HD. Rental. Fits Stanley-Bostitch flooring nailer No.HFN1, MIIIFN, MFN200. Also fits: Porter-Cable: FCN200, Powernail: 345, 45, Primatech: P210, H300, H330, Q500, Senco: SHF50, SHF15, SHF10. Rental.
Senco L13BABN Medium Narrow Wire Staple Senco RW19BPE L Cleat Collated Flooring Nail Midwest 04086 Toggle Bolt
Applications: Assembling drawers, Underlayment Sheathing, Molding, Trim, Pre-finished Gypsum, Vinyl and Aluminum Siding, General Woodworking. Fits: Senco: SLS25XP, SLS15, SLS18, SLS20-L, SKS-L, LN4450; Hitachi: N3804AB, N3804A; Makita: AT63A; Duofast: KN1848A, KN1848; Porter Cable: NS150A, NS150, NS100. Others Accuset A100LS, A150LS, A2N1125, Atro Minor 90/32, 90/40, BEA 90/38-150, Craftsman 18300, 18306, 18367, Fasco F25 A-90/40, Hilti SN114B, Spotnails HL3852. Fits: Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Superior FCN50, Duo-Fast FloorMaster 200-C, and other L cleat nailers. Midwest Toggle Bolt, Round Head, 1/8 in Anchor, 3 in Anchor, Drill Bit Size 3/8 in, Zinc Plated, With Wings
Senco ZX18EAA Head Pin Nail Red Head 11272 Wedge Anchor STAPLE GALV 16GA 1-1/2
Galvanized finish, chisel point, medium head. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Stanley SX50351-1/8G Narrow Finish Staple