Home > FASTENERS > NUTS, BOLTS, SCREWS > SCREWS > SHEET METAL SCREWS - PH SELF
Sort By:
1
Twist-N-Lock 11364 Drywall Anchor Twist-N-Lock 11353 Light Duty Drywall Anchor Stud Solver 29503 Hollow Wall Anchor
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness: 3/4". #6 x 1-1/4"sheet metal screw. Accommodates loads up to 50 lbs. Drills directly into drywall.Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable.  Applications: Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks. Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs.
Cobra 086Y Spring Toggle Bolt Pro-Fit 0718200 Collated Nail Cobra 054S Medium Toggle Bolt
Can be used in all types of hollow material. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Made of resistant nylon with wings that expand behind drywall. Corrosion resistant.
Cobra 052S Small Toggle Bolt Cobra 081Y Spring Toggle Bolt Cobra 082Y Spring Toggle Bolt
Made of resistant nylon with wings that expand behind drywall. Corrosion resistant. Can be used in all types of hollow material. Can be used in all types of hollow material.
Cobra 085Y Spring Toggle Bolt Cobra 163Y Special Short Drive Hollow Wall Anchor Cobra 096Y Spring Toggle Bolt
Can be used in all types of hollow material. Simply taps into drywall, no pre-drilling, vibration resistant. Can be used in all types of hollow material.
Cobra 095Y Spring Toggle Bolt Pro-Fit 0718201 Collated Nail Walldriller 016S Hollow Wall Anchor
Can be used in all types of hollow material. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Triplegrip 171S Wall Anchor Cobra Anchors 173S Wall Anchor Pro-Fit 0718202 Collated Nail
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 133Y Long Hollow Wall Anchor Triplegrip 170S Wall Anchor Triplegrip 172S Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Cobra 132Y Short Hollow Wall Anchor Cobra 137Y Short Hollow Wall Anchor Cobra 131Y Extra Short Hollow Wall Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 162Y Long Drive Hollow Wall Anchor Cobra 161Y Short Drive Hollow Wall Anchor Walldriller 034S Hollow Wall Anchor
Simply taps into drywall, no pre-drilling, vibration resistant. Simply taps into drywall, no pre-drilling, vibration resistant. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Cobra 185S Screw Anchor Walldriller 022S Hollow Long Wall Anchor Walldriller 024S Hollow Long Wall Anchor
Notched wings prevent rotation in wall. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Cobra 187S Screw Anchor Cobra 197S Screw Anchor Cobra 141Y Short Hollow Wall Anchor
Notched wings prevent rotation in wall. Notched wings prevent rotation in wall. Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long
Cobra 138Y Long Hollow Wall Anchor Cobra Anchors WallDriller Hollow Long Wall Anchor Cobra 193S Screw Anchor
Pre-assembled unit. Three head styles of screws available. Sizes available: from 1/8'' Extra Short to 1/4'' Extra Long Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Notched wings prevent rotation in wall.
Wallgripper 750S Wall Anchor Pro-Fit 0718203 Collated Nail Walldriller 016R Hollow Wall Anchor
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Walldriller 042S Hollow Long Wall Anchor Pro-Fit 0718204 Collated Nail FlipToggle 420S Toggle Bolt
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation.
FlipToggle 425S Toggle Bolt Walldriller 029R Hollow Long Wall Anchor Wallgripper 753S Wall Anchor
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Cobra Anchors WallGripper Hollow Wall Anchor With Bolt Walldriller 034R Hollow Wall Anchor Pro-Fit 0718205 Collated Nail
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra Anchors DrillerToggle Wall Anchor With Bolt Drillertoggle 363S Hollow Wall Anchor With Bolt NAIL FINISH 18GA 1IN
Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Pro-Fit 0718206 Collated Nail Pro-Fit 0718207 Collated Nail Cobra 197R Screw Anchor
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Notched wings prevent rotation in wall.
NAIL BRAD 18GA 18GA 1 IN 2.5K Cobra 193R Screw Anchor Drillertoggle 367S Hollow Wall Anchor With Bolt
Chisel point, coated finish. smooth shank, adhesive collated. Notched wings prevent rotation in wall. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Pro-Fit 712254 Collated Nail Senco A201009 Collated Nail Senco A201259 Collated Nail
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Senco A201509 Collated Nail Walldriller 042R Hollow Long Wall Anchor Triplegrip 171R Wall Anchor
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Pro-Fit 0712304 Collated Nail Midwest 10281 Self-Drilling Screw Midwest 10278 Self-Drilling Screw
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Midwest Self-Drilling Screw, NO 10 Screw, 1-1/2 in Length, Hexagonal Washer Head, Drill Point, Steel, Zinc Plated, For General Construction, Decks, Fencing, Siding and Marine Midwest Self-Drilling Screw, NO 10 Screw, 1/2 in Length, Hexagonal Washer Head, NO 2 Drive, Slotted Drive, Drill Point, Steel, Zinc Plated, For General Construction, Decks, Fencing, Siding and Marine
Midwest 10277 Self-Drilling Screw Midwest 10275 Self-Drilling Screw Midwest 10276 Self-Drilling Screw
Midwest Self-Drilling Screw, NO 8 Screw, 1 in Length, Hexagonal Washer Head, Steel, Zinc Plated Midwest Self-Drilling Screw, NO 8 Screw, 1/2 in Length, Hexagonal Washer Head, NO 2 Drive, Slotted Drive, Drill Point, Steel, Zinc Plated, For General Construction, Decks, Fencing, Siding and Marine Midwest Self-Drilling Screw, NO 8 Screw, 3/4 in Length, Hexagonal Washer Head, Steel, Zinc Plated
Midwest 10280 Self-Drilling Screw Midwest 10279 Self-Drilling Screw Midwest 10480 Self-Drilling Screw
Midwest Self-Drilling Screw, NO 10 Screw, 1 in Length, Hexagonal Washer Head, Steel, Zinc Plated Midwest Self-Drilling Screw, NO 10 Screw, 3/4 in Length, Hexagonal Washer Head, Steel, Zinc Plated Midwest Self-Drilling Screw, NO 8 Screw, 1-1/2 in Length, Hexagonal Washer Head, Drill Point, Steel, Zinc Plated, For General Construction, Decks, Fencing, Siding and Marine
Cobra Anchors 172R Wall Anchor Teks 21316 Self-Tapping Screw Teks 21348 Self-Tapping Screw
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing.
Teks 21308 Self-Tapping Screw Teks 21344 Self-Tapping Screw Teks 21372 Self-Tapping Screw
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing.
Teks 21336 Self-Tapping Screw Teks 21356 Self-Tapping Screw Teks 21320 Self-Tapping Screw
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing.
Teks 21360 Self-Tapping Screw Teks 21332 Self-Tapping Screw Teks 21312 Self-Tapping Screw
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing.
Teks 21364 Self-Tapping Screw Teks 21340 Self-Tapping Screw Teks 21352 Self-Tapping Screw
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing.
Teks 21328 Self-Tapping Screw Cobra 187R Screw Anchor Triplegrip 170R Wall Anchor
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Residential steel frame construction, duct work to steel framing, electrical accessories to steel framing, track to stud and stud splicing. Notched wings prevent rotation in wall. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
Teks 21500 Lathe Screw Teks 21512 Lathe Screw Teks 21516 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21504 Lathe Screw Teks 21508 Lathe Screw Senco A202009 Collated Nail
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
Triplegrip 173R Wall Anchor Teks 21532 Lathe Screw Teks 21520 Lathe Screw
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Teks 21528 Lathe Screw Teks 21536 Lathe Screw Teks 21524 Lathe Screw
No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head. No predrilling, screws tap their own threads, secure fastening and striping holding power. Allows for efficient material removal.  Applications: Attaching metal lathe to steel studs for stucco/plaster applications, Attaching pre-drilled metal brackets to wood,  Applications requiring a wide, low-profile head.
Senco ZX16EAANR Head Pin Nail Senco M001001 Collated Finish Nail Pro-Fit 0635074 Collated Finish Nail
Galvanized finish, chisel point, medium head. Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
NAIL FINISH 18GA 2IN          Senco A209809 Collated Nail Cobra Anchors DrillerToggle Wall Anchor With Bolt
For light and medium duty jobs such as cabinet face frames, decorative trim, scribe moldings and picture frames. Fits A125BN and A200BN brad nailers. Includes 300 each 5/8", 3/4", 1" and 1-1/4". Information on nail compatibility is available online at www.senco.com. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only.
Wallgripper 750R Wall Anchor Senco A402009 Collated Finish Nail NAIL BRAD 18GA 18GA 1-1/4 2.5K
Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required. Information on nail compatibility is available online at www.senco.com. Chisel point, coated finish. smooth shank, adhesive collated.
Pro-Fit 0712454 Collated Nail Pro-Fit 0635094 Collated Finish Nail Teks 21384 Self-Tapping Screw
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Attachment of plywood or 2x Lumber to steel framing.
Teks 21380 Self-Tapping Screw Senco M001002 Collated Finish Nail Stanley BT1300B Stick Collated Nail
No pre-drilling necessary Screws tap their own threads. Secure fastening and strong holding power. Engineered drill point and flute allow for efficient material removal. Applications: Attachment of plywood or 2x Lumber to steel framing. Information on nail compatibility is available online at www.senco.com. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer.
TieMaster GTIE4RP Framing Screw Walldriller 028L Hollow Long Wall Anchor Walldriller 027L Anchor Kit
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley BT1340B Stick Collated Nail NAIL FINISH ANGLE 15G 1.25INCH Pro-Fit 0712504 Collated Nail
Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Arrow Finishing Nail, 15 ga, 1-1/4 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Senco M001003 Collated Finish Nail Pro-Fit 0718102 Collated Nail Pro-Fit 635134 Collated Finish Nail
Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
NAIL BRAD 18GA 18GA 1-1/2 2.5K Stanley BT1303B Stick Collated Nail Stanley BT1345B Stick Collated Nail
Chisel point, coated finish. smooth shank, adhesive collated. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer.
SCREW RSS HANDY PAK NO10X2IN  Senco M001004 Collated Finish Nail Pro-Fit 0712554 Collated Nail
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Information on nail compatibility is available online at www.senco.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Cobra 085M Spring Toggle Bolt LumberLok LL915R50 Structural Screw Walldriller 021M Hollow Long Wall Anchor
Can be used in all types of hollow material. Designed specifically for attaching wood connectors. Double barrier corrosion resistant coating to complement the Gold Coat product line. 50 screws per package. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Senco A301500 Angled Strip Collated Finish Nail Drillertoggle 364R Hollow Wall Anchor With Bolt TieMaster GTIE412RP Framing Screw
Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. Fine centered point helps guide anchor into wall. A sharp cutting edge, reduces the force required to cut the material. Fast and easy to install. All you need is a screwdriver. Self drilling, strong holding power. For drywall applications only. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
Stanley BT1309B Stick Collated Nail Triplegrip 172M Wall Anchor Senco M001005 Collated Finish Nail
Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Information on nail compatibility is available online at www.senco.com.
NAIL BRAD 18GA 18GA 1-3/4 2.5K Stanley BT1350B Stick Collated Nail Pro-Fit 712604 Collated Nail
Chisel point, coated finish. smooth shank, adhesive collated. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
Triplegrip 171M Wall Anchor Triplegrip 170M Wall Anchor Senco A302000 Angled Strip Collated Finish Nail
Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted. Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com.
NAIL FINISH ANGLE 15G 1.5INCH Dewalt DCS16150 Collated Finish Nail NAIL BRAD 18GA 18GA 2IN 2.5K
Arrow Finishing Nail, 15 ga, 1-1/2 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Dewalt Collated Finish Nail, 1/16 in Shank Diameter, 16 ga, 1-1/2 in Length, Brad Head, Adhesive Straight Collation, Chisel Point, Smooth Shank, Steel, Hot Dip Galvanized, Suitable For Use With: D51257K Pneumatic Nailer Chisel point, coated finish. smooth shank, adhesive collated.
TieMaster GTIE5RP Framing Screw Pro-Fit 635154 Collated Finish Nail Stanley SB16-1.25-1M Stick Collated Finish Nail
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.bostitch.com.
Cobra 082M Spring Toggle Bolt TieMaster GTIE6RP Framing Screw SCREW RSS 10X2-1/2IN
SCREW RSS 10X2-1/2IN
Our Price: $11.59
Can be used in all types of hollow material. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Senco A301750 Angled Strip Collated Finish Nail Stanley BT1314B Stick Collated Nail Cobra 081M Spring Toggle Bolt
Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer. Can be used in all types of hollow material.
SCREW STRUCTURAL 1/4X1-1/2IN  Twist-N-Lock 25310 Drywall Anchor Senco M001007 Collated Finish Nail
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness: 3/4". #8 x 1-1/4" sheet  metal screw. Accommodates loads to 75 lbs. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. For medium-duty wall applications such as installing shelving, mirrors, picture frames, etc. Information on nail compatibility is available online at www.senco.com.
NAIL FINISH 16GA 1-1/2        Senco A302500 Angled Strip Collated Finish Nail Stanley SB16-1.5-1M Stick Collated Finish Nail
Applications: Mouldings, picture frame assembly, trim and cabinetry building. Information on nail compatibility is available online at www.senco.com. Information on nail compatibility is available online at www.bostitch.com.
NAIL FINISH 16GA 2IN          FlipToggle 420R Toggle Bolt Triplegrip 173M Wall Anchor
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Superior holding power, 2 expandable wings that grip tightly behind drywall, 2 lateral wings hold the anchor in place, plus drill bits. Cam action expands inside drywall while inserted.
NAIL FINISH 16GA STR 1-3/4    Pro-Fit 0712375 Collated Nail Pro-Fit 0712450 Collated Nail
Adhesive collated, coated finish. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com.
Senco A302009 Collated Finish Nail Cobra 086M Spring Toggle Bolt Stanley BT1335B Stick Collated Nail
Information on nail compatibility is available online at www.senco.com. Can be used in all types of hollow material. Shank diameter 0.047?.  Adhesive straight collation, chisel point, smooth shank, brown. Suitable for use with: SB-1842BN, SB- 2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2 Pneumatic Nailer.
Walldriller 041M Hollow Long Wall Anchor Pro-Fit 0278098 Post Frame Screw Pro-Fit 0278058 Post Frame Screw
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. 1/4" hex drive, self piercing screws used to fasten steel roofing and siding. 1/4" hex drive, self piercing screws used to fasten steel roofing and siding.
Pro-Fit 0278158 Post Frame Screw Pro-Fit 0278138 Post Frame Screw Pro-Fit 603054 Collated Finish Nail
1/4" hex drive, self piercing screws used to fasten steel roofing and siding. 1/4" hex drive, self piercing screws used to fasten steel roofing and siding. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com.
FlipToggle 425R Toggle Bolt NAIL FINISH ANGLE 15G 1.75INCH SCREW RSS 10X3-1/8IN
SCREW RSS 10X3-1/8IN
Our Price: $13.34
The new FLIPTOGGLE supplies extra holding power in drywall/masonry material with its strong toggling mechanism. Easy and fast to install, this new product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time. Twice as strong as the regular toggle bolt with same bolt diameter, the FLIPTOGGLE requires only 1/2" hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation. Arrow Finishing Nail, 15 ga, 1-3/4 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Pro-Fit 712250 Collated Nail Pro-Fit 603074 Collated Finish Nail Camo 0347150 Structural Screw
Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head.
SCREW RSS MINI 5/16X3-1/8IN   Pro-Fit 0718104 Collated Nail Midwest 05107 Self-Tapping Screw
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Midwest Self-Tapping Screw, NO 8 Screw, 1/2 in Length, Pan Head, Phillips Drive, Coarse Thread, 18-8 Stainless Steel, Used as Metal to Wood
Senco ZX10EAA Head Pin Nail Pro-Fit 0712300 Collated Nail Camo 0347490 Ledger Structural Screw
Galvanized finish, chisel point, medium head. Information on nail compatibility is available online at www.nationalnail.com. Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head.
Pro-Fit 0718105 Collated Nail Pro-Fit 0712500 Collated Nail SCREW RSS STARHD 50CT 1/4X2IN
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Information on nail compatibility is available online at www.nationalnail.com. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Senco A302509 Collated Finish Nail Senco AX10EAA Collated Nail Camo 0347170 Structural Screw
Information on nail compatibility is available online at www.senco.com. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head.
Senco AX15EAA Collated Nail Camo 0347190 Structural Screw Senco AX13EAA Collated Nail
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head. Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com.
TieMaster GTIE8RP Framing Screw Pro-Fit 603094 Collated Finish Nail Midwest 03281 Self-Drilling Screw
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Midwest Self-Drilling Screw, NO 8 Screw, 1/2 in Length, Hexagonal Washer Head, Steel, Zinc Plated
Pro-Fit 0718103 Stick Collated Nail Camo 0347200 Structural Screw NAIL FINISH ANGLE 15G 2 INCH
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head. Arrow Finishing Nail, 15 ga, 2 in Length, Round Head, 34 deg Collation, Chisel Point, Round Shank, Steel, Galvanized, For Use With: PT15G Angle Nailer
Camo 0347520 Ledger Structural Screw Stud Solver 25316 Hollow Wall Anchor Stanley SB16-1.75-1M Stick Collated Finish Nail
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head. Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6-#8 diameter screws of any length. Up to 50lb load capacity. Drills directly into drywall or wood studs. Zinc die cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4" sheet metal screw; Maximum fixture thickness: 3/4". Removable. Applications: Closet organizers, Electrical fixtures, Curtain rods, HVAC Fixtures, Plumbing fixtures, Light shelving and supports, Signs. Information on nail compatibility is available online at www.bostitch.com.
Senco AX17EAA Collated Nail Midwest 05109 Self-Tapping Screw SCREW RSS MINI 5/16X4IN
SCREW RSS MINI 5/16X4IN
Our Price: $16.43
Galvanized, smooth shank. Applications: Molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails, and picture frames. Information on nail compatibility is available online at www.senco.com. Midwest Self-Tapping Screw, NO 8 Screw, 3/4 in Length, Pan Head, Phillips Drive, Coarse Thread, 18-8 Stainless Steel, Used as Metal to Wood Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Camo 0347220 Structural Screw Pro-Fit 0718101 Collated Nail Senco ZX13EAA Head Pin Nail
Replaces 3/8" and 1/2" lag bolts and screws for exterior structural wood to wood applications,  flat head. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Galvanized finish, chisel point, medium head.
Pro-Fit 603114 Collated Finish Nail Pro-Fit 0718106 Stick Collated Nail Walldriller 013M Hollow Wall Anchor
Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Use for interior trim and moldings. Information on nail compatibility is available online at www.nationalnail.com. Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc.
Stanley SB16-2.00-1M Stick Collated Finish Nail Midwest 03283 Self-Drilling Screw Wallgripper 750M Wall Anchor
Information on nail compatibility is available online at www.bostitch.com. Midwest Self-Drilling Screw, NO 8 Screw, 3/4 in Length, Hexagonal Washer Head, Steel, Zinc Plated Expands and grips tightly behind drywall. Patented design, installs with a screwdriver, no pre-drilling required.
Walldriller 033M Hollow Wall Anchor SCREW LATH SHARP PT NO8 X3/4IN SCREW LATH SHARP PT NO8 X 1IN
Fine centered point that helps guide the anchor into the wall with flawless precision.  Sharp cutting edge reduces force required to cut the material, making it a self-drilling anchor without pre-drilling. Also, a sharp profile thread cuts deeply into the hole to ensure maximum holding power and stability. Available in nylon or zinc. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed. Provides secure metal-to-metal fastening with strong holding power. Feature sharp points and can be used where a wide, low-profile screw head is needed.