Home > FASTENERS > NUTS, BOLTS, SCREWS > NUTS/BOLTS/WASHERS > WASHERS - FLAT - ZP
Sort By:
1
PUSH PINS 16PC/CARD           PUSH PINS CLEAR 16PC/CARD     OOK 53500 Decorative Pushpin Hanger
Used for maps, charts, banners, pendants, poster boards, and calendars. 16 pieces. Used for maps, charts, banners, pendants, poster boards, and calendars. 16 pieces. Decorative push pin hangers.
Midwest 50722 Medium Split Lock Washer Pro-Fit 0288128 Drywall Screw Midwest 50723 Medium Split Lock Washer
Midwest Split Lock Washer, Medium, 7/16 in Nominal, Zinc Plated Use for drywall to 20 gauge to 14 gauge steel studs. Midwest Split Lock Washer, Medium, 1/2 in Nominal, Zinc Plated
Midwest 50725 Medium Split Lock Washer PIN ESCHN BRASS PLTD 1/2 X 18 PIN ESCHN BRASS PLTD 5/8 X 18
Midwest Split Lock Washer, Medium, 5/8 in Nominal, Zinc Plated Hillman Escutcheon Pin, 1/2 in, 18 ga, Steel, Brass Plated Hillman Escutcheon Pin, 5/8 in, 18 ga, Steel, Brass Plated
PIN ESCHN BRASS PLTD 3/4 X 18 PIN ESCHN BRASS PLTD 1 X 16   Rock On 23300 Cement Board Screw
Hillman Escutcheon Pin, 3/4 in, 18 ga, Steel, Brass Plated Hillman Escutcheon Pin, 1 in, 16 ga, Steel, Brass Plated Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment.
Rock On 23310 Cement Board Screw Midwest 50726 Medium Split Lock Washer Midwest 3944 Medium Split Lock Washer
Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment. Midwest Split Lock Washer, Medium, 3/4 in Nominal, Zinc Plated Midwest Split Lock Washer, Medium, 1/4 in Nominal, Zinc Plated
Midwest 3943 Medium Split Lock Washer Backer-On 23400 Cement Board Screw Midwest 3945 Medium Split Lock Washer
Midwest Split Lock Washer, Medium, 3/16 in Nominal, Zinc Plated Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment. Midwest Split Lock Washer, Medium, 5/16 in Nominal, Zinc Plated
Pro-Fit 0313078 Cement Board Screw Hillman 122596 Cut Tack Hillman 122598 Cut Tack
Use for attaching cement board to wood studs. Approx. 166 count per lb. Hillman Cut Tack, Series: 122596, NO 12, 11/16 in Length, Steel, Blue, For Carpet Hillman Cut Tack, Series: 122598, NO 16, 13/16 in Length, Steel, Blue, For Carpet
Hillman 122674 Thumb Tack Hillman 122593 Cut Tack Hillman 122594 Cut Tack
Hillman Thumb Tack, Series: 122674, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, White, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Cut Tack, Series: 122593, NO 6, 1/2 in Length, Sharp Point, Steel, Blue, For Carpet Hillman Cut Tack, Series: 122594, NO 8, 9/16 in Length, Steel, Blue, For Carpet
Hillman 122641 Push Pin Hillman 122591 Cut Tack Hillman 122679 Thumb Tack
Hillman Push Pin, 5 in Length, Plastic, Steel Point, Snap-Pak Package, White Color, For Home, Office and Commercial Applications Hillman Cut Tack, Series: 122591, NO 3, 3/8 in Length, Steel, Blue, For Carpet and Upholstery Hillman Thumb Tack, Series: 122679, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Flat Broad Head, 5/16 in Head, Sharp Point, Metal, Brown, Painted, For Banners, Calendars and Hanging or Holding Down Charts
Hillman 122616 Cut Tack Hillman 122599 Cut Tack Hillman 122592 Cut Tack
Hillman Cut Tack, Series: 122616, NO 10, 5/8 in Length, Copper, For Carpet Hillman Cut Tack, Series: 122599, NO 18, 7/8 in Length, Steel, Blue, For Carpet Hillman Cut Tack, Series: 122592, NO 4, 7/16 in Length, Steel, Blue, For Carpet and Upholstery
PUSH PIN ASSORTED             Hillman 122662 Double Point Tack Hillman 122510 Wire Brad Nail
Snap-Pak Push Pin, Steel, Assorted, Includes: (16) Thumb Tacks Hillman Double Point Tack, Series: 122662, NO 11, 1/2 in Length, Steel, Galvanized, For House, Office and School Hillman Wire Brad Nail, Series: 122510, 1 in, 17 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects
Hillman 122516 Wire Brad Nail Hillman 122656 Double Point Tack Hillman 122509 Wire Brad Nail
Hillman Wire Brad Nail, Series: 122516, 1-1/2 in, 16 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects Hillman Double Point Tack, Series: 122656, NO 14, 5/8 in Length, Steel, Blue, For House, Office and School Hillman Wire Brad Nail, Series: 122509, 1 in, Cupped Head, 16 ga, Smooth Shank, Steel, Bright, For Commercial and Home
Hillman 122600 Cut Tack Hillman 122514 Wire Brad Nail Hillman 122672 Thumb Tack
Hillman Cut Tack, Series: 122600, NO 22, 1 in Length, Sharp Point, Steel, Blue, For Carpet Hillman Wire Brad Nail, Series: 122514, 1-1/4 in, 17 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects Hillman Thumb Tack, Series: 122672, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Brass, Painted, For Banners, Calendars and Hanging or Holding Down Charts
Hillman 122506 Wire Brad Nail Hillman 122655 Double Point Tack Hillman 122507 Wire Brad Nail
Hillman Wire Brad Nail, Series: 122506, 3/4 in, 18 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects Hillman Double Point Tack, Series: 122655, NO 9, 7/16 in Length, Steel, Blue Hillman Wire Brad Nail, Series: 122507, 7/8 in, 17 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects
Hillman 122640 Push Pin Hillman 122595 Cut Tack Hillman 122671 Thumb Tack
Hillman Push Pin, 5 in Length, Plastic, Steel Point, Snap-Pak Package, Clear Color, For Home, Office and Commercial Applications Hillman Cut Tack, Series: 122595, NO 10, 5/8 in Length, Steel, Blue, For Carpet Hillman Thumb Tack, Series: 122671, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Yellow, Painted, For Banners, Calendars and Hanging or Holding Down Charts
Hillman 122505 Wire Brad Nail Hillman 122677 Thumb Tack Hillman 122502 Wire Brad Nail
Hillman Wire Brad Nail, Series: 122505, 3/4 in, Cupped Head, 17 ga, Smooth Shank, Steel, Bright, For Commercial and Home Hillman Thumb Tack, Series: 122677, Flat Broad Head, Sharp Point, Steel, Assorted, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Wire Brad Nail, Series: 122502, 5/8 in, 18 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects
Hillman 122678 Thumb Tack Hillman 122511 Wire Brad Nail Pro-Fit 0313108 Cement Board Screw
Hillman Thumb Tack, Series: 122678, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Flat Broad Head, 5/16 in Head, Sharp Point, Metal, Blue, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Wire Brad Nail, Series: 122511, 1 in, 18 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects Use for attaching cement board to wood studs. Approx. 166 count per lb.
Hillman 122670 Thumb Tack Hillman 122658 Double Point Tack Hillman 122500 Wire Brad Nail
Hillman Thumb Tack, Series: 122670, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Nickel, For Banners, Calendars and Hanging or Holding Down Charts Hillman Double Point Tack, Series: 122658, NO 5, 3/8 in Length, Steel, Blue, For House, Office and School Hillman Wire Brad Nail, Series: 122500, 1/2 in, 19 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects
Hillman 122673 Thumb Tack Hillman 122597 Cut Tack Hillman 122513 Wire Brad Nail
Hillman Thumb Tack, Series: 122673, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Red?, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Cut Tack, Series: 122597, NO 14, 3/4 in Length, Steel, Blue, For Carpet Hillman Wire Brad Nail, Series: 122513, 1-1/4 in, 16 ga, Smooth Shank, Steel, Bright, For Light Duty and Small Finishing Projects
Snap-Pak 122659 Wire Staple Backer-On 23410 Cement Board Screw Midwest 3946 Medium Split Lock Washer
Used to secure coaxial cable. Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Backer-On's patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment. Midwest Split Lock Washer, Medium, 3/8 in Nominal, Zinc Plated
Hillman 122523 Wire Brad Nail Hillman 122524 Wire Brad Nail Hillman 122522 Wire Brad Nail
Hillman Wire Brad Nail, Series: 122523, 1-1/4 in, Cupped Head, 16 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Wire Brad Nail, Series: 122524, 1-1/2 in, Cupped Head, 16 ga, Steel, Galvanized, For Commercial and Home Hillman Wire Brad Nail, Series: 122522, 1 in, Cupped Head, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
Hillman 122606 Cut Tack Hillman 122520 Wire Brad Nail Hillman 122518 Wire Brad Nail
Hillman Cut Tack, Series: 122606, NO 10, 5/8 in Length, Galvanized, For Carpet and Upholstery Hillman Wire Brad Nail, Series: 122520, 3/4 in, Cupped Head, 18 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Wire Brad Nail, Series: 122518, 1/2 in, Cupped Head, 19 ga, Steel, Galvanized, For Commercial and Home
Hillman 122602 Cut Tack Hillman 122521 Wire Brad Nail Midwest 3925 Fender Washer
Hillman Cut Tack, Series: 122602, NO 4, 7/16 in Length, Galvanized, For Carpet and Upholstery Hillman Wire Brad Nail, Series: 122521, 7/8 in, Cupped Head, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Midwest Fender Washer, 3/16 in Nominal, 1 in Outside Diameter, Zinc Plated
Midwest 3928 Fender Washer DuraSpin 06A125P Collated Drywall Screw DuraSpin 06B125P Collated Drywall Screw
Midwest Fender Washer, 1/4 in Nominal, 1 in Outside Diameter, Zinc Plated 50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662) Clear zinc finish. Applications: Drywall to Light Steel. Compatible Tools: DCF5000, TY5100, TY5300, D404-14V, D550-18V, TY9000, TY0200, TY0300
Midwest 3929 Fender Washer DuraSpin 06A162P Collated Drywall Screw DuraSpin 06B162P Collated Drywall Screw
Midwest Fender Washer, 1/4 in Nominal, 1-1/4 in Outside Diameter, Zinc Plated 50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662) Clear zinc finish. Applications: Drywall to Light Steel. Compatible Tools: DCF5000, TY5100, TY5300, D404-14V, D550-18V, TY9000, TY0200, TY0300
DuraSpin 07A200P Collated Drywall Screw Hillman 122526 Wire Brad Nail Hillman 122529 Wire Brad Nail
50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662) Hillman Wire Brad Nail, Series: 122526, 3/4 in, Cupped Head, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home Hillman Wire Brad Nail, Series: 122529, 1-1/4 in, Cupped Head, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home
Midwest 3849 USS Flat Washer Tapcon 23305 Cement Board Screw Midwest 3845 USS Flat Washer
Midwest Flat Washer, USS, 1-1/2 in Nominal, Zinc Plated Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment. Midwest Flat Washer, USS, 1 in Nominal, Zinc Plated
Midwest 3847 USS Flat Washer Midwest 3844 USS Flat Washer Midwest 3930 Fender Washer
Midwest Flat Washer, USS, 1-1/4 in Nominal, Zinc Plated Midwest Flat Washer, USS, 7/8 in Nominal, Zinc Plated Midwest Fender Washer, 1/4 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated
Pro-Fit 0288124 Drywall Screw Backer On 23405 Cement Board Screw Midwest 3843 USS Flat Washer
Use for drywall to 20 gauge to 14 gauge steel studs. Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment. Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated
Midwest 3933 Fender Washer Midwest 3842 USS Flat Washer Backer On 23415 Cement Board Screw
Midwest Fender Washer, 5/16 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated Midwest Flat Washer, USS, 5/8 in Nominal, Zinc Plated Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment.
Midwest 3841 USS Flat Washer DuraSpin 06A162W Collated Drywall Screw Midwest 3935 Fender Washer
Midwest Flat Washer, USS, 9/16 in Nominal, Zinc Plated For drywall to wood use. 50 screws per flat strip. Midwest Fender Washer, 3/8 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated
Midwest 3840 USS Flat Washer Pro-Fit 0313074 Cement Board Screw Pro-Fit 0313104 Cement Board Screw
Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated, BX117 Use for attaching cement board to wood studs. Approx. 166 count per lb. Use for attaching cement board to wood studs. Approx. 166 count per lb.
Midwest 3839 USS Flat Washer Pro-Fit 0288104 Drywall Screw Midwest 3838 USS Flat Washer
Midwest Flat Washer, USS, 7/16 in Nominal, Zinc Plated Use for drywall to 20 gauge to 14 gauge steel studs. Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated
Midwest 3837 USS Flat Washer Midwest 3936 Fender Washer Midwest 5629 USS Flat Washer
Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated Midwest Fender Washer, 1/2 in Nominal, 2 in Outside Diameter, Zinc Plated Midwest Flat Washer, USS, 5/8 in Nominal, Galvanized
Midwest 5628 USS Flat Washer Midwest 5627 USS Flat Washer Midwest 3836 USS Flat Washer
Midwest Flat Washer, USS, 1/2 in Nominal, Galvanized Midwest Flat Washer, USS, 3/8 in Nominal, Galvanized Midwest Flat Washer, USS, 1/4 in Nominal, Zinc Plated
DuraSpin 06A125PB Collated Drywall Screw Midwest 5626 USS Flat Washer Midwest 5625 USS Flat Washer
50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662) Midwest Flat Washer, USS, 5/16 in Nominal, Galvanized Midwest Flat Washer, USS, 1/4 in Nominal, Galvanized
Midwest 3835 USS Flat Washer Midwest 4696 USS Flat Washer Midwest 4695 USS Flat Washer
Midwest Flat Washer, USS, 3/16 in Nominal, Zinc Plated Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated Midwest Flat Washer, USS, 5/8 in Nominal, Zinc Plated
Midwest 4694 USS Flat Washer Midwest 4692 USS Flat Washer Midwest 4691 USS Flat Washer
Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated
Midwest 4690 USS Flat Washer
Midwest Flat Washer, USS, 1/4 in Nominal, Zinc Plated
   
 
1