Home > FASTENERS > NUTS, BOLTS, SCREWS > NUTS/BOLTS/WASHERS > NUTS - WING
Sort By:
1
Pro-Fit 0280198 Drywall Screw Pro-Fit 0280108 Drywall Screw Pro-Fit 0280078 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280208 Drywall Screw Pro-Fit 0280178 Drywall Screw Pro-Fit 0280138 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280058 Drywall Screw Pro-Fit 0280158 Drywall Screw Rock On 23300 Cement Board Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment.
Rock On 23310 Cement Board Screw Midwest 5320 USS Flat Washer Midwest 5321 USS Flat Washer
Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment. Midwest Flat Washer, USS, NO 6 Nominal, Stainless Steel, Grade: 18-8 Midwest Flat Washer, USS, NO 8 Nominal, Stainless Steel, Grade: 18-8
Backer-On 23400 Cement Board Screw Midwest 5322 USS Flat Washer Hillman 51805 Upholstery Nail
Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment. Midwest Flat Washer, USS, NO 10 Nominal, Stainless Steel, Grade: 18-8 Decorative, durable furniture nails.
Pro-Fit 0313078 Cement Board Screw Hillman 122596 Cut Tack Hillman 122598 Cut Tack
Use for attaching cement board to wood studs. Approx. 166 count per lb. Hillman Cut Tack, Series: 122596, NO 12, 11/16 in Length, Steel, Blue, For Carpet Hillman Cut Tack, Series: 122598, NO 16, 13/16 in Length, Steel, Blue, For Carpet
Hillman 122674 Thumb Tack Hillman 122554 Wire Nail Hillman 122593 Cut Tack
Hillman Thumb Tack, Series: 122674, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, White, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Wire Nail, Series: 122554, 1 in, 18 ga, Steel, Bright, For Any Projects Hillman Cut Tack, Series: 122593, NO 6, 1/2 in Length, Sharp Point, Steel, Blue, For Carpet
Hillman 122553 Wire Nail Hillman 122594 Cut Tack Hillman 122556 Wire Nail
Hillman Wire Nail, Series: 122553, 1 in, 17 ga, Steel, Bright, For Any Projects Hillman Cut Tack, Series: 122594, NO 8, 9/16 in Length, Steel, Blue, For Carpet Hillman Wire Nail, Series: 122556, 1-1/4 in, 17 ga, Steel, Bright, For Commercial and Home
Hillman 122591 Cut Tack Hillman 122679 Thumb Tack Hillman 122616 Cut Tack
Hillman Cut Tack, Series: 122591, NO 3, 3/8 in Length, Steel, Blue, For Carpet and Upholstery Hillman Thumb Tack, Series: 122679, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Flat Broad Head, 5/16 in Head, Sharp Point, Metal, Brown, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Cut Tack, Series: 122616, NO 10, 5/8 in Length, Copper, For Carpet
Hillman 122599 Cut Tack Hillman 122592 Cut Tack Hillman 122662 Double Point Tack
Hillman Cut Tack, Series: 122599, NO 18, 7/8 in Length, Steel, Blue, For Carpet Hillman Cut Tack, Series: 122592, NO 4, 7/16 in Length, Steel, Blue, For Carpet and Upholstery Hillman Double Point Tack, Series: 122662, NO 11, 1/2 in Length, Steel, Galvanized, For House, Office and School
Hillman 122549 Wire Nail Hillman 122683 Furniture Nail Hillman 122552 Wire Nail
Hillman Wire Nail, Series: 122549, 7/8 in, 17 ga, Steel, Bright, For Any Projects Hillman Furniture Nail, Series: 122683, NO 9, Large Round Head, Steel, Nickel Plated, For Tacking on Cloth, Vinyl and Fabric Material Hillman Wire Nail, Series: 122552, 1 in, 16 ga, Steel, Bright, For Any Projects
Hillman 122547 Wire Nail Hillman 122558 Wire Nail Hillman 122656 Double Point Tack
Hillman Wire Nail, Series: 122547, 3/4 in, 17 ga, Steel, Bright, For Any Projects Hillman Wire Nail, Series: 122558, 1-1/2 in, 16 ga, Steel, Bright, For Any Projects Hillman Double Point Tack, Series: 122656, NO 14, 5/8 in Length, Steel, Blue, For House, Office and School
Hillman 122600 Cut Tack Hillman 122684 Furniture Nail Hillman 122688 Furniture Nail
Hillman Cut Tack, Series: 122600, NO 22, 1 in Length, Sharp Point, Steel, Blue, For Carpet Hillman Furniture Nail, Series: 122684, NO 210, Large Round Head, Black, For Tacking on Cloth, Vinyl and Fabric Material Hillman Furniture Nail, Series: 122688, Hammered Head, Nickel Plated, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery
Hillman 122686 Furniture Nail Hillman 122672 Thumb Tack Hillman 122655 Double Point Tack
Hillman Furniture Nail, Series: 122686, 11/32 in, 7/16 in Length, Large Round Head, Bronze, For Tacking on Cloth, Vinyl and Fabric Material Hillman Thumb Tack, Series: 122672, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Brass, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Double Point Tack, Series: 122655, NO 9, 7/16 in Length, Steel, Blue
Hillman 122555 Wire Nail Hillman 122682 Furniture Nail Hillman 122690 Furniture Nail
Hillman Wire Nail, Series: 122555, 1-1/4 in, 16 ga, Smooth Shank, Steel, Bright, For Commercial and Home Hillman Furniture Nail, Series: 122682, NO 9, Large Round Head, Brass, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery Hillman Furniture Nail, Series: 122690, 1-1/32 in, 7/16 in Length, Small Round Head, Brass, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery
Hillman 122595 Cut Tack Hillman 122671 Thumb Tack Hillman 122677 Thumb Tack
Hillman Cut Tack, Series: 122595, NO 10, 5/8 in Length, Steel, Blue, For Carpet Hillman Thumb Tack, Series: 122671, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Yellow, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Thumb Tack, Series: 122677, Flat Broad Head, Sharp Point, Steel, Assorted, Painted, For Banners, Calendars and Hanging or Holding Down Charts
Hillman 122543 Wire Nail Hillman 122681 Furniture Nail Hillman 122678 Thumb Tack
Hillman Wire Nail, Series: 122543, 1/2 in, 19 ga, Steel, Bright, For Any Projects Hillman Furniture Nail, Series: 122681, NO 64, Daisy Oxford Head, Antique Brass, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery Hillman Thumb Tack, Series: 122678, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Flat Broad Head, 5/16 in Head, Sharp Point, Metal, Blue, Painted, For Banners, Calendars and Hanging or Holding Down Charts
Pro-Fit 0313108 Cement Board Screw Hillman 122670 Thumb Tack Hillman 122658 Double Point Tack
Use for attaching cement board to wood studs. Approx. 166 count per lb. Hillman Thumb Tack, Series: 122670, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Nickel, For Banners, Calendars and Hanging or Holding Down Charts Hillman Double Point Tack, Series: 122658, NO 5, 3/8 in Length, Steel, Blue, For House, Office and School
Hillman 122673 Thumb Tack Hillman 122680 Furniture Nail Hillman 122689 Furniture Nail
Hillman Thumb Tack, Series: 122673, 23/64 in Diameter, 15/64 in Length Shank, 3/8 in Length, Capped Head, 5/16 in Head, Sharp Point, Steel, Red?, Painted, For Banners, Calendars and Hanging or Holding Down Charts Hillman Furniture Nail, Series: 122680, NO 9, Hammered Head, Antique Brass, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery Hillman Furniture Nail, Series: 122689, 11/32 in, 7/16 in Length, Large Round Head, Brown, For Tacking on Cloth, Vinyl and Fabric Material to Upholstery
Hillman 122597 Cut Tack Snap-Pak 122659 Wire Staple Backer-On 23410 Cement Board Screw
Hillman Cut Tack, Series: 122597, NO 14, 3/4 in Length, Steel, Blue, For Carpet Used to secure coaxial cable. Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Backer-On's patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment.
Hillman 122562 Wire Nail Hillman 122564 Wire Nail Hillman 122606 Cut Tack
Hillman Wire Nail, Series: 122562, 7/8 in, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Wire Nail, Series: 122564, 1-1/4 in, 16 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Cut Tack, Series: 122606, NO 10, 5/8 in Length, Galvanized, For Carpet and Upholstery
Hillman 122563 Wire Nail Hillman 122560 Wire Nail Hillman 122561 Wire Nail
Hillman Wire Nail, Series: 122563, 1 in, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Wire Nail, Series: 122560, 5/8 in, 18 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home Hillman Wire Nail, Series: 122561, 3/4 in, 18 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
Hillman 122602 Cut Tack Midwest 5323 USS Flat Washer Acorn S-WM101716G250 Self-Tapping Screw
Hillman Cut Tack, Series: 122602, NO 4, 7/16 in Length, Galvanized, For Carpet and Upholstery Midwest Flat Washer, USS, 1/4 in Nominal, Stainless Steel, Grade: 18-8 Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Midwest 5324 USS Flat Washer Midwest 50715 USS Flat Washer Midwest 3925 Fender Washer
Midwest Flat Washer, USS, 5/16 in Nominal, Stainless Steel, Grade: 18-8 Midwest Flat Washer, USS, 1/2 in Nominal, Stainless Steel, Grade: 18-8 Midwest Fender Washer, 3/16 in Nominal, 1 in Outside Diameter, Zinc Plated
Midwest 3928 Fender Washer Midwest 5325 USS Flat Washer Midwest 3929 Fender Washer
Midwest Fender Washer, 1/4 in Nominal, 1 in Outside Diameter, Zinc Plated Midwest Flat Washer, USS, 3/8 in Nominal, Stainless Steel, Grade: 18-8 Midwest Fender Washer, 1/4 in Nominal, 1-1/4 in Outside Diameter, Zinc Plated
Pro-Fit 0280054 Drywall Screw Pro-Fit 0280074 Drywall Screw Pro-Fit 0280104 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
Pro-Fit 0280134 Drywall Screw Pro-Fit 0280154 Drywall Screw Pro-Fit 0280174 Drywall Screw
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs.
SCREW W/WING PFH NO10X1-7/16IN Hillman 122530 Wire Nail Hillman 122533 Wire Nail
For attaching wood to metal. Strong holding power. Features sharp points and can be used where a flush appearance is needed. Approved for teated lumber. Hillman Wire Nail, Series: 122530, 3/4 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home Hillman Wire Nail, Series: 122533, 1-1/4 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home
Hillman 122532 Wire Nail Pro-Fit 0280174M Drywall Screw Tapcon 23305 Cement Board Screw
Hillman Wire Nail, Series: 122532, 1 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home Use for drywall to light gauge steel studs. Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment.
Acorn S-WM12212G250 Self-Tapping Screw Midwest 3930 Fender Washer Backer On 23405 Cement Board Screw
Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Midwest Fender Washer, 1/4 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment.
Midwest 3933 Fender Washer Backer On 23415 Cement Board Screw Midwest 03802 Wing Nut
Midwest Fender Washer, 5/16 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated Designed for attaching HardieBacker or equivalent fiber cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with T-25 bit provides for one-handed installation. Climacoat corrosion resistant finish prevents rust from bleeding into grout and are perfect for use in high moisture areas. Conforms to ANSI A108.11 for cement board attachment. Midwest Wing Nut, NO 10-24 Thread, Zinc Plated
Midwest 3935 Fender Washer Midwest 03804 Wing Nut Pro-Fit 0313074 Cement Board Screw
Midwest Fender Washer, 3/8 in Nominal, 1-1/2 in Outside Diameter, Zinc Plated Midwest Wing Nut, 1/4-20 Thread, Zinc Plated Use for attaching cement board to wood studs. Approx. 166 count per lb.
Pro-Fit 0313104 Cement Board Screw SCREW W/WING PFH NO12 X2-3/4IN Acorn S-WM14234G250 Self-Tapping Screw
Use for attaching cement board to wood studs. Approx. 166 count per lb. For attaching wood to metal. Strong holding power. Features sharp points and can be used where a flush appearance is needed. Approved for teated lumber. Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Midwest 03805 Wing Nut Acorn S-WM14314G250 Self-Tapping Screw Midwest 3936 Fender Washer
Midwest Wing Nut, 5/16-18 Thread, Zinc Plated Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Midwest Fender Washer, 1/2 in Nominal, 2 in Outside Diameter, Zinc Plated
Midwest 5629 USS Flat Washer Midwest 5628 USS Flat Washer Midwest 5627 USS Flat Washer
Midwest Flat Washer, USS, 5/8 in Nominal, Galvanized Midwest Flat Washer, USS, 1/2 in Nominal, Galvanized Midwest Flat Washer, USS, 3/8 in Nominal, Galvanized
Midwest 03806 Wing Nut Midwest 5626 USS Flat Washer Midwest 5625 USS Flat Washer
Midwest Wing Nut, 3/8-16 Thread, Zinc Plated Midwest Flat Washer, USS, 5/16 in Nominal, Galvanized Midwest Flat Washer, USS, 1/4 in Nominal, Galvanized
   
 
1