|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Hex Locknut, NO 10-24 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
Midwest Hex Locknut, 1/4-20 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
Midwest Hex Nut, 1/4-20 Thread, NC Thread, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Hex Locknut, 5/16-18 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
Midwest Hex Nut, 5/16-18 Thread, Stainless Steel
|
Midwest Hex Locknut, 3/8-16 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Wing Nut, NO 10-24 Thread, Zinc Plated
|
Midwest Hex Nut, 3/8 in Thread, Stainless Steel
|
Midwest Hex Locknut, 7/16-14 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Wing Nut, 1/4-20 Thread, Zinc Plated
|
Midwest Wing Nut, 5/16-18 Thread, Zinc Plated
|
Midwest Hex Locknut, 1/2-13 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Wing Nut, 3/8-16 Thread, Zinc Plated
|
Midwest Hex Locknut, 5/8-11 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
Midwest Hex Locknut, 3/4-10 Thread, Coarse Thread, Nylon Insert, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 6 Screw, 1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
For the installation of wire fencing to wooden posts. Galvanized for corrosion resistance.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Underlay Nail, Pro-Fit, 0.083 in Shank Diameter, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank, Steel, Bright
|
Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 2 in Length, 17/64 in Head, 12 ga, Ring Shank, Steel, Bright
|
Pro-Fit Underlayment Nail, 1-3/4 in Length, 17/64 in Head, 12 ga, Ring Shank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 1-1/2 in Length, 13/64 in Head, 12 ga, Ring Shank, Steel, Bright
|
6 gauge. Use to fasten stockade panels to wood posts.
|
Midwest Combo Tapping Screw, NO 6 Screw, 3/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 8 Screw, 1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to attach poultry netting to wood. 13 Gauge. 3/16" head.
|
Midwest Combo Tapping Screw, NO 8 Screw, 3/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 10 Screw, 1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 6 Screw, 1 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 8 Screw, 1 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 10 Screw, 3/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 8 Screw, 1-1/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 6 Screw, 1-1/2 in Length, Pan Head, Phillips/Slotted Drive, Coarse Thread, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 10 Screw, 1 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 8 Screw, 1-1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 10 Screw, 1-1/4 in Length, Pan Head, Phillips/Slotted Drive, Coarse Thread, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 10 Screw, 1-1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 12 Screw, 3/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 12 Screw, 1 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Combo Tapping Screw, NO 12 Screw, 1-1/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Hillman Wire Nail, Series: 122554, 1 in, 18 ga, Steel, Bright, For Any Projects
|
Hillman Wire Nail, Series: 122553, 1 in, 17 ga, Steel, Bright, For Any Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122556, 1-1/4 in, 17 ga, Steel, Bright, For Commercial and Home
|
Hillman Wire Nail, Series: 122549, 7/8 in, 17 ga, Steel, Bright, For Any Projects
|
Hillman Wire Nail, Series: 122552, 1 in, 16 ga, Steel, Bright, For Any Projects
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122547, 3/4 in, 17 ga, Steel, Bright, For Any Projects
|
Hillman Wire Nail, Series: 122558, 1-1/2 in, 16 ga, Steel, Bright, For Any Projects
|
Hillman Wire Nail, Series: 122555, 1-1/4 in, 16 ga, Smooth Shank, Steel, Bright, For Commercial and Home
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122543, 1/2 in, 19 ga, Steel, Bright, For Any Projects
|
Midwest Combo Tapping Screw, NO 8 Screw, 2 in Length, Pan Head, Phillips/Slotted Drive, Coarse Thread, Steel, Zinc Plated
|
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
|
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
|
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal (26-22 gauge) or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
|
Midwest Combo Tapping Screw, NO 10 Screw, 2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Midwest Combo Tapping Screw, NO 12 Screw, 1-1/2 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Midwest Combo Tapping Screw, NO 14 Screw, 3/4 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
Hillman Wire Nail, Series: 122562, 7/8 in, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122564, 1-1/4 in, 16 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
|
Hillman Wire Nail, Series: 122563, 1 in, 17 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
|
Hillman Wire Nail, Series: 122560, 5/8 in, 18 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122561, 3/4 in, 18 ga, Smooth Shank, Steel, Galvanized, For Commercial and Home
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Midwest Combo Tapping Screw, NO 14 Screw, 1 in Length, Pan Head, Phillips/Slotted Drive, Diamond Point, Steel, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
Midwest Combo Tapping Screw, NO 12 Screw, 2 in Length, Pan Head, Phillips/Slotted Drive, Coarse Thread, Steel, Zinc Plated
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to install barbed wire and field fence.
|
Midwest Combo Tapping Screw, NO 10 Screw, 3 in Length, Pan Head, Phillips/Slotted Drive, Coarse Thread, Steel, Zinc Plated
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Maze Nail Underlayment Nail, Hand Driven, Series: F-143, 4D, 1-1/2 in Length, Flat Head, 1/4 in Head, 12-1/2 ga, Ring Shank, For Sheathing and Sub-Floor Applications
|
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Pro-Fit Underlayment Nail, 2 in Length, 17/64 in Head, 12 ga, Ring Shank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 7/8 in Nominal, Zinc Plated
|
Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated, BX117
|
Midwest Flat Washer, USS, 1 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from premium 8g Bezinal coated wire, these barbed fence staples feature double barbs to maintain fastening and provide easy driving.
|
Midwest Flat Washer, USS, 9/16 in Nominal, Zinc Plated
|
Midwest Flat Washer, USS, 5/8 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Underlayment Nail, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank
|
6 gauge. Use to fasten stockade panels to wood posts.
|
Midwest Flat Washer, USS, 7/16 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated
|
Used to install barbed wire and field fence. Locks easily to post. Manufactured of high tension steel wire and galvanized with a triple coating of zinc; class 3. Meets FF-N-105B.
|
Used to install barbed wire and field fence. Locks easily to post. Manufactured of high tension steel wire and galvanized with a triple coating of zinc; class 3. Meets FF-N-105B.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 1-1/2 in Nominal, Zinc Plated
|
Midwest Flat Washer, USS, 1-1/4 in Nominal, Zinc Plated
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
Used to attach poultry netting to wood. 13 Gauge. 3/16" head.
|
Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 1/4 in Nominal, Zinc Plated
|
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
Metal to metal sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screws have a #3 drill point and are designed for 26 gauge and heavier metal to join laps and to stitch corner and rake trims and the ridge cap where they overlap wall steel. A 5/16" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For attaching wood to metal. Strong holding power. Features sharp points and can be used where a flush appearance is needed. Approved for teated lumber.
|
Hillman Wire Nail, Series: 122530, 3/4 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home
|
Hillman Wire Nail, Series: 122533, 1-1/4 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Wire Nail, Series: 122532, 1 in, 17 ga, Smooth Shank, Stainless Steel, For Commercial and Home
|
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
Midwest Flat Washer, USS, 3/16 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
|
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
|
For attaching wood to metal. Strong holding power. Features sharp points and can be used where a flush appearance is needed. Approved for teated lumber.
|
Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed.
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Wood to metal screws are made from C1022 steel, case hardened for fastening wood to steel or aluminum. #10-24 screw is a Phillips wafer head. #12-24 (#14 Head) and #14-20 screws are star drive flat head. The star drive flat head reduces camout and end load, handles greater torque than Phillips or square drive, and eliminates spinning and fastener damage. For star drive use a T30 drill bit (not included). Reamer wings drill through wood and snap off when they encounter metal. The #3 drill point penetrates up to 1/4" metal with no predrilling. Shank slot holds steel shavings and improves drilling action. Ideal for trailer beds and walls. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Requires no predrilling. Heat treated steel. Easy to remove when needed. Safer than using spikes or rebar. Installs with good rechargeable drill; use 14 volts or larger. Used for landscape timbers, fencing, log homes, headerboards, pole barn construction and retaining walls.
|
Midwest Flat Washer, USS, 1/2 in Nominal, Zinc Plated
|
Midwest Flat Washer, USS, 5/16 in Nominal, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Flat Washer, USS, 3/4 in Nominal, Zinc Plated
|
Midwest Flat Washer, USS, 3/8 in Nominal, Zinc Plated
|
This screw has an integrated washer-head and is complimented by a rubber washer below the screw head.
|
|
|
|
|
|
|
|
|
|
|
|
|
This screw has an integrated washer-head and is complimented by a rubber washer below the screw head.
|
|
|
