Home > FASTENERS > NUTS, BOLTS, SCREWS > NUTS/BOLTS/WASHERS > LAG BOLTS - HEX - ZP
Sort By:
1
Midwest 07667 Machine Screw Midwest 07668 Machine Screw Pro-Fit 0084078 Underlay Nail
Midwest Machine Screw, NO 8-32 Screw, 1-1/2 in Length, Round Head, Combo Drive, Fine Thread, Steel, Zinc Plated Midwest Machine Screw, NO 8-32 Screw, 2 in Length, Round Head, Combo Drive, NC Thread, Steel, Zinc Plated Pro-Fit Underlay Nail, Pro-Fit, 0.083 in Shank Diameter, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank, Steel, Bright
Pro-Fit 0084138 Underlay Nail Pro-Fit 0084118 Underlayment Nail Pro-Fit 0084098 Underlay Nail
Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 2 in Length, 17/64 in Head, 12 ga, Ring Shank, Steel, Bright Pro-Fit Underlayment Nail, 1-3/4 in Length, 17/64 in Head, 12 ga, Ring Shank Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 1-1/2 in Length, 13/64 in Head, 12 ga, Ring Shank, Steel, Bright
Pro-Fit 0016148 Heat Treated Ardox Flooring Nail Pro-Fit 0016158 Heat Treated Ardox Flooring Nail SCREW M/P FRAME/DECK 8X1-1/4IN
Ardox heat treated for hardwood floors. 13/64" head. Ardox heat treated for hardwood floors. 13/64" head. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DECK 8X1-1/2IN SCREW M/P FRAME/DECK 8X1-3/4IN SCREW MULTI-PRPS FRM/DCK 8X2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
Midwest 03670 Hex Nut Maze Nail SST31128252 Trim Nail Midwest 03748 Hex Machine Nut
Midwest Hex Nut, 1/4-20 Thread, NC Thread, Zinc Plated The checkered head on these nails helps to hold paint and the strong slim bodies drive better than aluminum trim nails. MADE IN USA Midwest Hex Machine Nut, NO 6-32 Thread, Coarse Thread, Zinc Plated
Midwest 03749 Hex Machine Nut Midwest 03751 Hex Machine Nut Midwest 03750 Hex Machine Nut
Midwest Hex Machine Nut, NO 8-32 Thread, Coarse Thread, Zinc Plated Midwest Hex Machine Nut, NO 10-32 Thread, Fine Thread, Zinc Plated Midwest Hex Machine Nut, NO 10-24 Thread, Coarse Thread, Zinc Plated
SCREW M/P FRAME/DECK 8X2-1/2IN SCREW M/P FRAME/DCK 10X3-1/2IN Midwest 03671 Hex Nut
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Midwest Hex Nut, 5/16-18 Thread, NC Thread, Zinc Plated
SCREW R4 FRAME/DECK 9X2IN     SCREW R4 FRAME/DECK 9X2-1/2IN Midwest 03673 Hex Nut
SCREW R4 FRAME/DECK 9X2IN
Our Price: $11.60
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Midwest Hex Nut, 7/16-14 Thread, NC Thread, Zinc Plated
Hillman 122536 Trim Nail Hillman 122537 Trim Nail Simpson Strong-tie S8SND1 Siding Nail
Hillman Trim Nail, Series: 122536, 1-1/4 in, 13 ga, Steel, Zinc Plated, For Small Wood and Craft Projects Hillman Trim Nail, Series: 122537, 1-1/4 in, 13 ga, Steel, Brass Plated, For Small Wood and Craft Projects Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
SCREW R4 FRAME/DECK 9X3-1/8IN SCREW R4 STAR 100CT 9X2-3/4IN Simpson Strong-tie S5SND1 Siding Nail
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
Midwest 03674 Hex Nut Midwest 03676 Hex Nut SCREW R4 FRAME/DECK 10X4IN
Midwest Hex Nut, 1/2-13 Thread, NC Thread, Zinc Plated Midwest Hex Nut, 5/8-11 Thread, NC Thread, Zinc Plated #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW R4 FRAME/DECK 10X3-1/8IN Camo 0350100S Deck Screw SCREW R4 FRAME/DECK 10X2-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
Midwest 03672 Hex Nut Bullseye AT3-1258 Hand Driven Trim Nail Bullseye AT3-1251 Hand Driven Trim Nail
Midwest Hex Nut, 3/8-16 Thread, NC Thread, Zinc Plated Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
SCREW FIN/TRIM 8X1-1/2IN      Midwest 03677 Hex Nut Midwest 03678 Hex Nut
SCREW FIN/TRIM 8X1-1/2IN
Our Price: $16.50
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Midwest Hex Nut, 3/4-10 Thread, NC Thread, Zinc Plated Midwest Hex Nut, 7/8-9 Thread, NC Thread, Zinc Plated
Maze Nail F-143 Hand Driven Underlayment Nail Midwest 03679 Hex Nut Pro-Fit 0084135 Underlayment Nail
Maze Nail Underlayment Nail, Hand Driven, Series: F-143, 4D, 1-1/2 in Length, Flat Head, 1/4 in Head, 12-1/2 ga, Ring Shank, For Sheathing and Sub-Floor Applications Midwest Hex Nut, NO 1-8 Thread, NC Thread, Zinc Plated Pro-Fit Underlayment Nail, 2 in Length, 17/64 in Head, 12 ga, Ring Shank
Camo 0350130S Deck Screw Midwest 01285 Lag Bolt Pro-Fit 0084075 Underlayment Nail
Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Midwest Lag Bolt, 1/4 in Thread, 1 in Overall Length, Hexagonal Head, Zinc Plated Pro-Fit Underlayment Nail, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank
Simpson Strong-tie S07225FB1 Deck Screw Camo 0350150S Deck Screw Swaneze S07C225FPT Deck Screw
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia, and mitred ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts. Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Durable powder coated finish painted heads that escape notice in finished work. #1 square drive, .230" diameter, trim head with 'Beaver Bite' type 17 auger point for extra fast starts. Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended, and a must near board ends to prevent splits. Slender #7 shank for finish work and trim. Use for decking jobs with stable woods & wood substitutes when screw heads need to be hidden.
Camo 0353100S Deck Screw SCREW R4 STAR 50CT 12X4-3/4IN SCREW FIN/TRIM 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $22.15
Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
Midwest 01287 Lag Bolt Midwest 1289 Lag Screw Camo 0353150S Deck Screw
Midwest Lag Bolt, 1/4 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Screw, 1/4 in Screw, 2 in Length, Hexagonal Head, Zinc Plated Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White
Midwest 01305 Lag Bolt Camo 0350170S Deck Screw Midwest 01333 Lag Bolt
Midwest Lag Bolt, 5/16 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated Camo Deck Screw, NO 8 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Midwest Lag Bolt, 1/2 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01290 Lag Bolt SCREW R4 FRAMING 12/14X5-5/8IN Midwest 01316 Lag Bolt
Midwest Lag Bolt, 1/4 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Midwest Lag Bolt, 3/8 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01300 Lag Bolt Midwest 01334 Lag Bolt SCREW FIN/TRIM 83-1/8IN
SCREW FIN/TRIM 83-1/8IN
Our Price: $31.88
Midwest Lag Bolt, 5/16 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 1/2 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
Midwest 01306 Lag Bolt SCREW M/P FRAME/DCK 12X6-3/8IN Midwest 01291 Lag Bolt
Midwest Lag Bolt, 5/16 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Midwest Lag Bolt, 1/4 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01317 Lag Bolt Camo 0350190S Deck Screw Midwest 01335 Lag Bolt
Midwest Lag Bolt, 3/8 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated Camo Deck Screw, NO 8 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Midwest Lag Bolt, 1/2 in Thread, 4-1/2 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01302 Lag Bolt Midwest 01292 Lag Bolt Midwest 07669 Machine Screw
Midwest Lag Bolt, 5/16 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 1/4 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Machine Screw, 1/4-20 Screw, 3 in Length, Round Head, Combo Drive, NC Thread, Steel, Zinc Plated
Midwest 01336 Lag Bolt Midwest 01318 Lag Bolt Midwest 01308 Lag Bolt
Midwest Lag Bolt, 1/2 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 3/8 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 5/16 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01303 Lag Bolt Midwest 01319 Lag Bolt Midwest 01338 Lag Bolt
Midwest Lag Bolt, 5/16 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 3/8 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 1/2 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01313 Lag Bolt Midwest 01293 Lag Bolt Midwest 01320 Lag Bolt
Midwest Lag Bolt, 3/8 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 1/4 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 3/8 in Thread, 4-1/2 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01330 Lag Bolt Midwest 01310 Lag Bolt Midwest 01304 Lag Bolt
Midwest Lag Bolt, 1/2 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 5/16 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 5/16 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
Simpson Strong-tie S8SND5 Siding Nail Simpson Strong-tie S5SND5 Siding Nail Simpson Strong-tie S10SND5 Siding Nail
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance. Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance. Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
Camo 0350104S Deck Screw SCREW M/P FRAME/DECK 8X1-3/4IN SCREW M/P FRAME/DECK 8X1-1/4IN
Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DECK 8X1-1/2IN SCREW MULTI-PRPS FRM/DCK 8X2IN SCREW M/P FRAME/DECK 8X2-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
Midwest 01331 Lag Bolt Midwest 01321 Lag Bolt Midwest 01315 Lag Bolt
Midwest Lag Bolt, 1/2 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 3/8 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated Midwest Lag Bolt, 3/8 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated
Midwest 01332 Lag Bolt SCREW MULTI-PRPS FRM/DCK 9X2IN SCREW M/P FRAME/DCK 10X2-1/2IN
Midwest Lag Bolt, 1/2 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DCK 10X3-1/8IN SCREW M/P FRAME/DCK 10X3-1/2IN SCREW MULT-PRPS FRM/DCK 10X4IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DECK 9X2-1/2IN SCREW M/P FRAME/DECK 9X3-1/8IN Midwest 01295 Lag Bolt
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Midwest Lag Bolt, 1/4 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
Camo 0353104S Deck Screw Midwest 01323 Lag Bolt Camo 0350134S Deck Screw
Camo Deck Screw, NO 8 Screw, 1-5/8 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White Midwest Lag Bolt, 3/8 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated Camo Deck Screw, NO 8 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
Midwest 01297 Lag Bolt Simpson Strong-tie T8SND5 Siding Nail Maze Nail HT-250 Hand Driven Trim Nail
Midwest Lag Bolt, 1/4 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance. Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
Maze Nail HT200112 Hand Driven Trim Nail Stormguard S203A112 Hand Driven Trim Nail Camo 0353154S Deck Screw
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods. For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint. Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Painted Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel, White
Maze Nail HT150112 Hand Driven Trim Nail Camo 0350154S Deck Screw Midwest 01325 Lag Bolt
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods. Camo Deck Screw, NO 8 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Point, 316 Stainless Steel Midwest Lag Bolt, 3/8 in Thread, 8 in Overall Length, Hexagonal Head, Zinc Plated
Stormguard R-112 Hand Driven Trim Nail Stormguard R-112 Hand Driven Trim Nail SCREW FIN/TRIM 8X2-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $109.02
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia. The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
SCREW FIN/TRIM 9X2-1/2IN      SCREW FIN/TRIM 8X2IN          Stormguard S205A530 Hand Driven Trim Nail
SCREW FIN/TRIM 9X2-1/2IN
Our Price: $109.02
SCREW FIN/TRIM 8X2IN
Our Price: $109.02
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
Stormguard S203A530 Hand Driven Trim Nail Camo 0348159S Deck Screw
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint. Camo Deck Screw, NO 10 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Point, 316 Stainless Steel
   
 
1