|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 3/8-16 Thread, 7 in Overall Length, NC Thread, Zinc Plated
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Designed for split-prone woods. Slim, sturdy shank and special blunt point virtually eliminate splits. Double-dipped in molten zinc. Checkered head enhances paint adhesion. Popular for sidings scheduled for finishing with paints or pigmented stains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
The checkered head on these nails helps to hold paint and the strong slim bodies drive better than aluminum trim nails. MADE IN USA
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Midwest Carriage Bolt, 1/4-20 Thread, 1 in Overall Length, NC Thread, Zinc Plated
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Midwest Lag Bolt, 1/4 in Thread, 1 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Trim Nail, Series: 122536, 1-1/4 in, 13 ga, Steel, Zinc Plated, For Small Wood and Craft Projects
|
Hillman Trim Nail, Series: 122537, 1-1/4 in, 13 ga, Steel, Brass Plated, For Small Wood and Craft Projects
|
Midwest Carriage Bolt, 1/4-20 Thread, 1-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Midwest Lag Bolt, 1/4 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/4-20 Thread, 2 in Overall Length, NC Thread, Zinc Plated
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Midwest Lag Screw, 1/4 in Screw, 2 in Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
Midwest Carriage Bolt, 1/4-20 Thread, 2-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Midwest Lag Bolt, 5/16 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 1/4 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 5/16-18 Thread, 1-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 5/16-18 Thread, 3-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 1-5/8 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Midwest Lag Screw, 1/4 in Screw, 1-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 5/16 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Midwest Carriage Bolt, 3/8-16 Thread, 2-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 5/16-18 Thread, 4 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/4-20 Thread, 3 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 1/2-13 Thread, 3 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Bolt, 3/8 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
|
Midwest Lag Bolt, 1/2 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/4 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 5/16 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 3/8 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 5/16-18 Thread, 4-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 1/4-20 Thread, 3-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Midwest Lag Screw, 1/4 in Screw, 2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Carriage Bolt, 5/16-18 Thread, 2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 3/8-16 Thread, 3 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Bolt, 5/16 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/2 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 5/16-18 Thread, 5 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 1/2-13 Thread, 4 in Overall Length, NC Thread, Zinc Plated
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for split-prone woods. Slim, sturdy shank and special blunt point virtually eliminate splits. Double-dipped in molten zinc. Checkered head enhances paint adhesion. Popular for sidings scheduled for finishing with paints or pigmented stains.
|
Midwest Lag Screw, 5/16 in Screw, 1-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 3/8 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 1/4 in Thread, 3-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 3-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 1/4-20 Thread, 4 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Midwest Lag Screw, 1/4 in Screw, 2-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 5/16 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 5/16 in Screw, 3-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Carriage Bolt, 1/2-13 Thread, 1-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 1/2-13 Thread, 4-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 5/16-18 Thread, 2-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 1-1/2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Screw, 3/8 in Screw, 2-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 5/16 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/2 in Thread, 4-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 4 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 5/16-18 Thread, 6 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Bolt, 3/8 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Midwest Carriage Bolt, 1/2-13 Thread, 5 in Overall Length, NC Thread, Zinc Plated
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Midwest Lag Screw, 5/16 in Screw, 4 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 1/2 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 3/8 in Thread, 1-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/4 in Thread, 4 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 4-1/2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 3/8 in Thread, 4-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/2 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 5/16 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 5/16 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 1/2-13 Thread, 2 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Screw, 1/4 in Screw, 3 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 1/2 in Screw, 4 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Screw, 3/8 in Screw, 3 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Carriage Bolt, 3/8-16 Thread, 2 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 5/16-18 Thread, 3 in Overall Length, NC Thread, Zinc Plated
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Midwest Lag Bolt, 1/2 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 5/16 in Screw, 2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Screw, 3/8 in Screw, 3-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 3/8 in Thread, 2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
Midwest Carriage Bolt, 1/2-13 Thread, 6 in Overall Length, NC Thread, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 5 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 1/2 in Screw, 4-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 1/4 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Bolt, 1/2 in Thread, 2-1/2 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 3/8 in Thread, 5 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 3/8-16 Thread, 5-1/2 in Overall Length, NC Thread, Zinc Plated
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 7 Screw, 3-1/2 in Length, Trim Head, T15 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Midwest Lag Screw, 3/8 in Screw, 4 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Bolt, 1/2 in Thread, 3 in Overall Length, Hexagonal Head, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 1/2 in Screw, 5 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Carriage Bolt, 3/8-16 Thread, 6 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Screw, 3/8 in Screw, 4-1/2 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 3/8 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Carriage Bolt, 1/2-13 Thread, 7 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Screw, 1/2 in Screw, 6 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Bolt, 1/4 in Thread, 6 in Overall Length, Hexagonal Head, Zinc Plated
|
Midwest Lag Screw, 3/8 in Screw, 5 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Midwest Lag Screw, 5/16 in Screw, 3 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications: Composite materials. Anti-Mushroom. Compatible Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Midwest Carriage Bolt, 1/2-13 Thread, 8 in Overall Length, NC Thread, Zinc Plated
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 1/2 in Screw, 3 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Applications: Composite materials. Anti-Mushroom. Compatible Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
Midwest Carriage Bolt, 3/8-16 Thread, 8 in Overall Length, NC Thread, Zinc Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
Midwest Lag Screw, 3/8 in Screw, 6 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
|
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 1-5/8 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 10 in Overall Length, NC Thread, Zinc Plated
|
Midwest Lag Screw, 1/2 in Screw, 8 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
Midwest Lag Bolt, 3/8 in Thread, 8 in Overall Length, Hexagonal Head, Zinc Plated
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 12 in Overall Length, NC Thread, Zinc Plated
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 8 Screw, 2 in Length, Bugle Head, T20 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
Designed for split-prone woods. Slim, sturdy shank and special blunt point virtually eliminate splits. Double-dipped in molten zinc. Checkered head enhances paint adhesion. Popular for sidings scheduled for finishing with paints or pigmented stains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 1/2 in Screw, 10 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
|
Highest quality nails for cedar, redwood and cypress siding materials. High tensile Nickel/Chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk without crushing surrounding wood. Checker pattern head blends with wood texture and serves to diffract sunlight. Annular ring threads preclude cupping of siding boards and nail-head popping. NOTE: Use 316 Stainless steel for seaside applications and superior corrosion resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Lag Screw, 3/8 in Screw, 8 in Length, Hexagonal Head, Grade 2, Hot Dip Galvanized
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
Use for exterior deck and railing projects where rust resistance is important.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for exterior deck and railing projects where rust resistance is important.
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Tan
|
Camo Deck Screw, Multi-Purpose, NO 9 Screw, 2-1/2 in Length, Bugle Head, T25 Drive, Star Drive, Type 17 Slash Point, Protech, Green
|
4 nibs under head, case hard, green ceramic coating with minimum salt spray test 1,000 hours, approved for use in ACQ pressure treated lumber. Meets or exceeds ASTM specification.
|
|
|
|
|
|
|
|
