|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Finish Nail, 10D, 3 in Length, 5/32 in Head, 11-1/2 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 6D, 2 in Length, 1/8 in Head, 13 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 8D, 2-1/2 in Length, 9/64 in Head, 12-1/2 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Finish Nail, 16D, 3-1/2 in Length, 11/64 in Head, 11 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 4D, 1-1/2 in Length, 7/64 in Head, 15 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 3D, 1-1/4 in Length, 15-1/2 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Structurally rated. For use with MiTek/USP Lumber Connectors' products. Hot-dipped galvanized finish for improved corrosion resistance. For additional information including withdrawal load and allowable shear per nail, please see USP Lumber Connectors charts in the Orgill paper catalog R7 reference pages.
|
Structurally rated. For use with MiTek/USP Lumber Connectors' products. Hot-dipped galvanized finish for improved corrosion resistance. For additional information including withdrawal load and allowable shear per nail, please see USP Lumber Connectors charts in the Orgill paper catalog R7 reference pages.
|
Use for metal hangers to wood. Hot dip galvanized for exterior use. Meets ASTM A-153.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for metal hangers to wood. Hot dip galvanized for exterior use. Meets ASTM A-153.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
The checkered head on these nails helps to hold paint and the strong slim bodies drive better than aluminum trim nails. MADE IN USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Trim Nail, Series: 122536, 1-1/4 in, 13 ga, Steel, Zinc Plated, For Small Wood and Craft Projects
|
Hillman Trim Nail, Series: 122537, 1-1/4 in, 13 ga, Steel, Brass Plated, For Small Wood and Craft Projects
|
Sencote coating, ProHead offset, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Finish Nail, 8D, 2-1/2 in Length, 9/64 in Head, 12-1/2 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 6D, 2 in Length, 1/8 in Head, 13 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Pro-Fit Finish Nail, 16D, 3-1/2 in Length, 11/64 in Head, 11 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Finish Nail, 4D, 1-1/2 in Length, 7/64 in Head, 15 ga, Smooth Shank, Steel, Electro-Galvanized, Used to Interior Trim and Moldings
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Use for metal hangers to wood. Hot dip galvanized for exterior use. Meets ASTM A-153.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for metal hangers to wood. Hot dip galvanized for exterior use. Meets ASTM A-153.
|
Information on nail compatibility is available online at www.senco.com.
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Full round head,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Full round head,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Offset round head, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 4 in Overall Length, NC Thread, Galvanized
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full round head,
|
Information on nail compatibility is available online at www.bostitch.com.
|
Full round head,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Midwest Carriage Bolt, 3/8-16 Thread, 3 in Overall Length, NC Thread, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
Information on nail compatibility is available online at www.senco.com.
|
Offser Round head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Offset round head, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 5 in Overall Length, NC Thread, Galvanized
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.senco.com.
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full round head,
|
Information on nail compatibility is available online at www.bostitch.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 3/8-16 Thread, 3-1/2 in Overall Length, NC Thread, Galvanized
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offser Round head.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Offser Round head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 3/8-16 Thread, 4 in Overall Length, NC Thread, Galvanized
|
Full round head,
|
Offset round head, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Sencote coating, ProHead offset, diamond point.
|
Sencote coating, ProHead offset, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Sencote coating, ProHead offset, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Offser Round head.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 6 in Overall Length, NC Thread, Galvanized
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Full round head,
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Offser Round head.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offser Round head.
|
Offser Round head.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full round head,
|
Offser Round head.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full round head,
|
Offset round head, diamond point.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
9 Gauge 1/4" Head. Use to fasten wire and fencing to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offset round head, diamond point.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Offset round head, diamond point.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 7 in Overall Length, NC Thread, Galvanized
|
Midwest Carriage Bolt, 3/8-16 Thread, 6 in Overall Length, NC Thread, Galvanized
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offser Round head.
|
Full round head,
|
Offser Round head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offser Round head.
|
Information on nail compatibility is available online at www.bostitch.com.
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com.
|
Midwest Carriage Bolt, 1/2-13 Thread, 8 in Overall Length, NC Thread, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
Temper hardened steel. Used for nailing lumber to concrete and masonry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Offset round head, diamond point.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.bostitch.com or use the reference pages in the back of the catalog. For use in most 30-34 degree paper collated framing nailers.
|
Sencote coating, ProHead offset, diamond point.
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sencote coating, ProHead offset, diamond point.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 10 in Overall Length, NC Thread, Hot Dip Galvanized
|
Information on nail compatibility is available online at www.bostitch.com.
|
6 gauge. Use to fasten stockade panels to wood posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
|
Sencote coating, ProHead offset, diamond point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offset round head, diamond point.
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offset round head, diamond point.
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For installation of wire fencing to wooden post. Galvanized for corrosion resistance.
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to install barbed wire and field fence.
|
Information on nail compatibility is available online at www.senco.com.
|
Used to install barbed wire and field fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Midwest Carriage Bolt, 3/8-16 Thread, 7 in Overall Length, NC Thread, Galvanized
|
Information on nail compatibility is available online at www.bostitch.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 1/2-13 Thread, 12 in Overall Length, NC Thread, Galvanized
|
Information on nail compatibility is available online at www.bostitch.com.
|
Information on nail compatibility is available online at www.senco.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Carriage Bolt, 3/8-16 Thread, 8 in Overall Length, NC Thread, Galvanized
|
Use for general rough framing and construction. Information on nail compatibility is available online at www.nationalnail.com.
|
Made from premium 8g Bezinal coated wire, these barbed fence staples feature double barbs to maintain fastening and provide easy driving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information on nail compatibility is available online at www.senco.com.
|
Round wire type. Made of high carbon steel, heat treated and tempered. Designed for fastening furring strip, cleats, flood plates, partition walls, etc. directly to masonry. 9 Gauge - 5/16" Head. MADE IN USA
|
Round wire type. Made of high carbon steel, heat treated and tempered. Designed for fastening furring strip, cleats, flood plates, partition walls, etc. directly to masonry. 9 Gauge - 5/16" Head. MADE IN USA
|
|
|
|
|
|
|
|
|
|
|
