Home > POWER TOOLS & ACC > POWER EQUIPMENT > POWER GENERATORS > GENERATORS - PORTABLE
Sort By:
1
Tru-Flate 21-133 Air Hose Fitting Stanley THREADTAPE Thread Sealant Tape Tru-Flate 21-595 Hose Adapter with Ball Socket
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Properly seals all male threaded connections to prevent air leaks. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket.
Tru-Flate 21-535 Air Hose Bushing Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug
All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-235 Air Line Plug Tru-Flate 12-325 Air Line Plug Tru-Flate 21-423 Barb Hose Splicer
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 12-135 Air Line Nipple Tru-Flate 12-335 Air Line Plug Tru-Flate 21-123 Air Hose Fitting
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-222 Air Hose Fitting Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-505 Air Line Coupling
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT.
Stanley TIRE-14F Tire Chuck Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting
Plated steel; corrosion resistant steel for long life. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 12-527 Air Line Plug Tru-Flate 21-242 Air Hose Fitting Stanley 38M-14M Hex Reducer Nipple
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Connects FPT to FPT. Use thread sealant tape on all male threads for air tight connections.
Tru-Flate 12-605 Air Line Plug Tru-Flate 21-515 Air Line Coupling Plews 21-557 Drain Cock
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass.
Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck
Plug 1/4". I/M x 3/8" MNPT. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 12-425 Air Line Plug Tru-Flate 21-467 Barb Hose Splicer
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 12-603 Air Line Plug Plews/Edelmann 12-611  Air Compressor Hose Fittings PLUG 3/8IN TF X 3/8IN FNPT
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plug 3/8". TF x 1/4" FNPT. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Pro-Fit 0132098 Exterior Roofing Nail Pro-fit 0132118 Roofing Nail Pro-fit 0132138 Roofing Nail
Use for asphalt shingles. Use for asphalt shingles. Use for asphalt shingles.
Pro-fit 0132058 Roofing Nail Pro-Fit 0132178 Roofing Nail Pro-Fit 0132078 Roofing Nail
Use for asphalt shingles. Use for asphalt shingles. Use for asphalt shingles.
Pro-Fit 0132158 Roofing Nail Pro-fit 0132048 Roofing Nail Stanley AP-38F Auto Hose Adapter
Use for asphalt shingles. Use for asphalt shingles. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter Pro-Fit 0056158 Interior Box Nail
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. Pro-Fit Box Nail, Interior, Pro-Fit, 8D, 0.134 in Shank Diameter, 2-1/2 in Length, 19/64 in Head, 11-1/2 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired
Pro-Fit 56188 Box Nail Pro-Fit 0056178 Interior Box Nail Pro-Fit 0056198 Interior Box Nail
Pro-Fit Box Nail, 12D, 3 in Length, 21/64 in Head, 10-1/2 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing Pro-Fit Box Nail, Interior, Pro-Fit, 10D, 0.148 in Shank Diameter, 3 in Length, 5/16 in Head, 10-1/2 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired Pro-Fit Box Nail, Interior, Pro-Fit, 16D, 0.165 in Shank Diameter, 3-1/2 in Length, 11/32 in Head, 10 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired
Pro-Fit 0056138 Interior Box Nail Pro-Fit 0056208 Interior Box Nail Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male
Pro-Fit Box Nail, Interior, Pro-Fit, 6D, 0.12 in Shank Diameter, 2 in Length, 17/64 in Head, 12-1/2 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired Pro-Fit Box Nail, Interior, Pro-Fit, 20D, 13/64 in Shank Diameter, 4 in Length, 3/8 in Head, 9 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections.
Pro-Fit 3075108 Drywall Nail Pro-Fit 3075088T Drywall Nail Pro-Fit 3075128 Drywall Nail
Used for nailing drywall to wood. Used for nailing drywall to wood. Used for nailing drywall to wood.
Pro-Fit 0056098 Interior Box Nail Pro-Fit 0056078 Interior Box Nail SPLICER HOSE REUSABLE 1/4IN
Pro-Fit Box Nail, Interior, Pro-Fit, 4D, 7/64 in Shank Diameter, 1-1/2 in Length, 7/32 in Head, 14 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired Pro-Fit Box Nail, Interior, Pro-Fit, 3D, 0.083 in Shank Diameter, 1-1/4 in Length, 7/32 in Head, 14-1/2 ga, Smooth Shank, Steel, Bright, Used in Easy Driving and Less Splitting is Desired Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 1/4IN   Pro-Fit 0084078 Underlay Nail Pro-Fit 0084138 Underlay Nail
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Pro-Fit Underlay Nail, Pro-Fit, 0.083 in Shank Diameter, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank, Steel, Bright Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 2 in Length, 17/64 in Head, 12 ga, Ring Shank, Steel, Bright
Pro-Fit 0084118 Underlayment Nail Pro-Fit 0084098 Underlay Nail Tru-Flate 12-705 Air Line Plug
Pro-Fit Underlayment Nail, 1-3/4 in Length, 17/64 in Head, 12 ga, Ring Shank Pro-Fit Underlay Nail, Pro-Fit, 7/64 in Shank Diameter, 1-1/2 in Length, 13/64 in Head, 12 ga, Ring Shank, Steel, Bright Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Mintcraft FDQ910 Inflation Kit Tru-Flate 17-355 Snap Clip On Air Line Chuck SPLICER HOSE REUSABLE 3/8IN
Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle. Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 3/8IN   Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life.
Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler SPLICER HOSE REUSABLE 1/2IN
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 1/2IN   Tru-Flate 13-235 Industrial Air Line Coupler Tru-Flate 13-225 Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley Industrial IHKIT-14F Hose Coupler Kit Bostitch BTFP72327 Ball Drain Valve COUPLER UNIVERSAL 1/4IN MPT
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Turn ball type drain valve. 1/4" NPT male thread. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
COUPLER UNIVERSAL 1/4IN FPT   Stanley HREPAIR-38 Hose Splice Kit Tru-Flate 41-300 Hose Repair Kit
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose; (1) barb x barb hose splicer for 3/8" hose & (3) Clamps. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose
Tru-Flate 13-125 Air Line Coupler Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Stanley TEE-14F Tee Fitting Tru-Flate 13-135 Air Line Coupler Hillman 532590 Box Nail
Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Hillman Box Nail, Series: 532590, 4D, 1-1/2 in Length, Flat Head, Steel, Polished, For Framing and General Construction
Stanley 3WAY-RND 3-Way Round Air Line Manifold HOSE AIR END REUSABLE 1/4IN   Tru-Flate 13-201 Coupler/Plug Set
Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-335 Air Line Coupler Tru-Flate 21-605 Barb Air Line Swivel
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
Plews/Edelmann 13-237 Hose Coupling HOSE AIR ED RUSBL W/SWVL 3/8IN HOSE AIR ED RUSBL W/SWVL 1/2IN
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-325 Air Line Coupler Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru-Flate 13-101 Coupler/Plug Set
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Mintcraft DZA019 Hose Coupler Set Tru-Flate 13-301 Coupler/Plug Set
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter
Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Stanley UC38-14M Push-to-Connect Auto Hose Adapter Tru-Flate 21-707 Safety Valve Tru-Flate 13-435 Air Line Coupler
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
HOSE AIR END REUSABLE 3/8IN   Tru-Flate 13-425 Air Line Coupler Tru-Flate 13-537 Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Plews/Edelmann 13-603 Hose Coupling Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-605 Hose Coupling
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Pro-Fit 0056205 Box Nail Pro-Fit 0056135 Box Nail Pro-Fit 0056195 Interior Box Nail
Pro-Fit Box Nail, 20D, 4 in Length, 3/8 in Head, 9 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing Pro-Fit Box Nail, 6D, 2 in Length, 17/64 in Head, 12-1/2 ga, Smooth Shank, Steel, Bright, Use where Easy Driving and Less Splitting is Desired, Framing Pro-Fit Box Nail, Interior, Pro-Fit, 16D, 0.165 in Shank Diameter, 3-1/2 in Length, 11/32 in Head, 10 ga, Smooth Shank, Steel, Bright, Used In Easy Driving and Less Splitting is Desired
Pro-Fit 0056175 Interior Box Nail Pro-Fit 0056155 Interior Box Nail Pro-Fit 56185 Box Nail
Pro-Fit Box Nail, Interior, Pro-Fit, 10D, 3 in Length, 5/16 in Head, 10-1/2 ga, Smooth Shank, Steel, Bright, Used In Easy Driving and Less Splitting is Desired Pro-Fit Box Nail, Interior, Pro-Fit, 8D, 0.134 in Shank Diameter, 2-1/2 in Length, 19/64 in Head, 11-1/2 ga, Smooth Shank, Steel, Bright, Used In Easy Driving and Less Splitting is Desired Pro-Fit Box Nail, 12D, 3 in Length, 21/64 in Head, 10-1/2 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
Bostitch Prozhoze Reusable Hose Repair Kit Pro-Fit 0056115 Box Nail Tru-Flate 13-613 Air Line Coupler
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Pro-Fit Box Nail, 5D, 1-3/4 in Length, 7/32 in Head, 14 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-527 Air Coupler Tru-Flate 13-401 Coupler/Plug Set
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 12-537 Air Hose Plug Tru-Flate 24-801 Air Line Pressure Gauge Pro-Fit 0132155 Roofing Nail
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. PSI 0-200  0-14 kg/cm2; mounting back. Use for asphalt shingles.
Pro-Fit 0132175 Roofing Nail Pro-Fit 0132045 Exterior Roofing Nail Pro-Fit 0132055 Exterior Roofing Nail
Use for asphalt shingles. Use for asphalt shingles. Use for asphalt shingles.
Pro-Fit 0132075 Exterior Roofing Nail Pro-Fit 0132095 Exterior Roofing Nail Pro-Fit 0132115 Exterior Roofing Nail
Use for asphalt shingles. Use for asphalt shingles. Use for asphalt shingles.
Pro-Fit 0132135 Exterior Roofing Nail COUPLER-PLUG SET 4PC          Pro-Fit 3075085T Drywall Nail
COUPLER-PLUG SET 4PC
Our Price: $16.36
Use for asphalt shingles. Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. Used for nailing drywall to wood.
Pro-Fit 3075105 Drywall Nail Maze Nail F-143 Hand Driven Underlayment Nail Tru-Flate 13-713 Air Line Coupler
Used for nailing drywall to wood. Maze Nail Underlayment Nail, Hand Driven, Series: F-143, 4D, 1-1/2 in Length, Flat Head, 1/4 in Head, 12-1/2 ga, Ring Shank, For Sheathing and Sub-Floor Applications Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Bostitch BTFP72326 Mini Regulator and Gauge Kit Pro-Fit 0084135 Underlayment Nail Plews 41-135 Air Line Regulator with Gauge
Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Pro-Fit Underlayment Nail, 2 in Length, 17/64 in Head, 12 ga, Ring Shank Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends.
Pro-Fit 0084075 Underlayment Nail Plews/Edelmann 41-101 Air Tool Oilers Tru-Flate 24-343 Manual Mini Air Line Filter
Pro-Fit Underlayment Nail, 1-1/4 in Length, 13/64 in Head, 14 ga, Ring Shank Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height.
Mintcraft ATA-052-1 Hose Plug Mintcraft ATA-053-A Hose Plug Sta-Lube SL22133 Air Compressor Oil
High speed steel. Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life.
Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge Stanley Industrial Air Compressor Regulator with Gauge REGULATR TOOL AT-HAND INLN AIR
Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI.
Speedway 50180 Spray Gun Tru-Flate 41-175 Air Compressor Accessory Kit Tru-Flate 41-907 Air Tank Conversion Kit
Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment. Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve.
Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge Tru-Flate 24-301 Manual Compact Air Line Filter Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant
Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently.
Tru-Flate 24-311 Manual Air Line Filter Mintcraft ATA-050 Air Hose Connector Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge
Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Brass. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz.
Mintcraft TA-054 Air Hose End Mintcraft ATA-057 Hose Plug Mintcraft ATA-0561 Air Line Connector
Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Brass.
Equipsource LF-WK Generator Wheel Kit Mintcraft ATA-0243L Barb Hose Splicer Ingersoll-Rand 210G Gravity Feed Pneumatic Spray Gun
Lifan's universal wheel kit for all "open-frame" style generators and water pumps. Includes 1 axle, 2 wheels, 2 handles, and 2 legs. All bolts, nuts and cotter pins included. All brass. Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and  (1) 20 1/4 oz plastic paint cup.
National Nail 0216115 Roofing Nail Lifan Power Usa ESPPC Duo-Power Parallel Cord Junction Box Mintcraft ATA-055 Quick Coupler
National Nail Roofing Nail, 1-3/4 in Length, Lead Head, Barbed Shank, Steel, Bright Parallel connection box for Energy Storm ESI2000 and ESI2600IER Inverters only. Duo-Power box allows combining the power of two Energy Storm digital inverters together for maximum wattage. Mix and match two different sizes unlike our competition. All power cords and digital signal cables included. All brass.
Pulsar PG1202S Portable Generator Mintcraft ATA-056 Quick Coupler GENERATOR 3MHP 2000W RECOIL
72 cc single cylinder 2 hp. 2-stroke, air cooled. Recoil start. 12V DC output. Two 120 V outlets. Runs 8.5h at half load. Max output: 1200W/60HZ. Rated output: 900W/60HZ. All brass. 3 MHP gas generator with recoil start.
Equipsource EnergyStorm ES1500 Portable Generator Pulsar PG2000 Portable Generator Equipsource ES2200 Portable Generator
Lifan portable generator specs: 1500 w surge, 1200 w rated, 2-120 v/20 amp AC receptacle. 1-12 v/8.3 amp DC receptacle. 1.5 MHP (97.7 cc) Lifan 4 stroke gasoline engine, recoil start, 1.00 gallon fuel tank, 6 hour run time (at 50 percent load). 63 decibles sound rating. 4-stroke, OHV, air cooled. Recoil start. 12V DC output without voltmeter. Two 120V outlets. Max output: 2200W/60HZ. Rated output: 1600W/60HZ. Lifan portable generator specs: 2200 w surge, 1800 w rated, 2-120v/20 amp AC receptacle, 4 MHP (118cc) Lifan 4-stroke gasoline engine, recoil start 1.98 gallon fuel tank, 7.5 hour run time (at 50 percent load) 74 decibels sound rating.
GENERATOR RES 4000W 7HP RECOIL GENERATOR 7MHP 3500W RECOIL   GENERATOR GAS 3050W-PEAK 2500W
Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 7 MHP (Maximum Horsepower), 212cc 4 stroke OHV gasoline engine. Surge 4100 Watt Output. Rated 3500 Watt Output. (3) 120 volt/20 amp AC receptacles. Recoil start/recoil and electric start. 4 gallon fuel tank. Quiet operation 65 decibel sound rating at 23 ft (7m). 12 hour run time (at 50 percent load). Low oil engine shutdown protection. EPA approved. 7MHP gas generator with recoil start. Carb & CSA approved. 208cc engine with 7 hp. Peak wattage 3050 watts, rated output 2500 watts. 4 gallon tank with 11 hour run time. 1/120V 20A duplex, 1 cigarette, 2/USB outlets. Digital hour meter. Ford FG3050P "U" series generator.
Pulsar PG4500 Portable Generator GENERATOR PRO 4000W 7HP RECOIL Pulsar PG6000 Portable Generator
Max. output 5250W. Rated output 4250W. Single cylinder 7 HP engine, 224cc 4 stroke, OHV, air cooled. Two 120 volt outlets, one 120v/240v twist lock, 12 volt DC output and 3 in-1 digital meter. Pulll start. Field tested and proven durable and dependable. Universal wheel kit (LFWKT) can be used with the LF4000 and LF4000-CA as its mobility kit. Perfect fit for the farm, contracting work, emergencies, homeowner, job sites or special events.  Features 7 MHP (Maximum Horsepower), 212 cc 4-stroke OHV gasoline engine. Surge 4000 Watt AC output; Rated 3500 Watt AC output. (2) 120 volt 20 amp GFCI AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock Receptacle. (1) 12 volt 8.3 amp DC Receptacle. 4 gallon fuel tank. 12 hour run time (at 50 percent load). 65 Decibel sound ratings at 23 ft (7m). Recoil start. Low oil engine shutdown protection. Automatic voltage regulation to protect tools/equipment from damage. Engine/generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved. Max. output 6000W/60HZ. Rated output 5000W/60HZ. Single cylinder 10 hp engine. 4 stroke, OHV, air cooled. Four 120 volt outlets, one 120v/240v twist lock. One 120v twist lock. Recoil start. 12 volt DC output. 3 into 1 digital meter.
Generac GP 5939 Portable Generator GENERATOR RES 5000W13HP RECOIL GENERATOR 13MHP 6500W RECOIL
Hardened steel tube cradle. Steel fuel tank with incorporated fuel gauge. Locking fold-down handles and wheel kit. Low-oil shutdown. Hour meter with maintenance resets. Specs: AC Rated Output - 5500 Watts; AC Maximum Output - 6875 Watts; AC Voltage - 120V/240V; AC Frequency - 60 Hz; Rated VAC Amperage 45.8/22.9; Max Rated VAC Amperage 57.3/28.6; Engine Type and Displacement - OHV 389cc; RPM - 3600; Starting Method ? Recoil Pull Start; Fuel Capacity - 7.2 Gallons (27.3 liters); Run Time at 1/2 Load - 10 Hours; Dimensions L x W x H (inches); 27.25 x 27 x 25. Unit Weight - 170.9 lbs. (81.3 kg.). Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 13 MHP (Maximum Horsepower), 389cc 4 stroke OHV gasoline engine. Surge 5700 Watt Output. Rated 5000 Watt Output. (3) 120 volt/20 amp AC receptacles. Recoil start/recoil and electric start. 6.5 gallon fuel tank. 75 decibel sound rating at 23 ft (7m). 10 hour run time (at 50 percent load). Low oil engine shutdown protection. EPA approved. This generator does not provide 240V receptacle capacity. 13 MHP gas generator with recoil start. Carb & CSA approved.
GENERATOR 13MHP 5500W ELEC STR GENERATOR RES 8000W 15HP ELEC Pulsar FG7750E Generator
13 MHP gas generator with electric and recoil start. 15HP, 420cc 4 stroke OHV gasoline engine. Surges 8100-E watt output; rated 7500 watt output. This quality generator is a perfect fit for homeowners, job sites, special events, parties, weddings etc. Features recoil and electric start, (3) 120 volt/20 amp AC receptacles, (1) 120V/240V 30 Amp AC receptacle, (1) 12V/0.3 Amp DC receptacle, and 6.5 gallon fuel tank. Low oil engine shutdown protection. 8 hour run time (at 50 percent load). 75 decibel sound ratings at 23 ft (7m). EPA approved. CARB compliant. For ideal performance from this "Built Ford Tough" 7750 peak watts, gasoline generator. Simple pushbutton, electric-start powered by its own maintenance free battery to the huge 420cc, engine. This EPA, CARB and CSA certified machine has been designed for years of use. Removable control panel with 25' mega-duty extension cord that allows user to actually move both the starter switch and two 120 v AC duplex outlets for remote use up to 25' from the main unit and out of the weather. Also included is a 120/240v AC twist-lock and a 12v DC outlet. The 6.8 gallon fuel capacity offers up to 9 hours of operating time on a single tank of gasoline. Created to operate up to four major appliances at one time. 12" no-flat, easy-roll tires and the fold-down counter-balanced padded handle allows for on-top storage when not in use. Digital hour meter and an easy-to-read gas gauge, GFCI outlet protection with weather protector rubber covers on all primary outlets and a zinc-coated fuel tank interior that helps prevent interior tank corrosion.
GENERATOR 7000WATT ES 50 STATE GENERATOR PRO 7000W13HP RECOIL GENERATOR PRO 8750W 15HP ELEC
GENERATOR PRO 8500W 15HP ELEC
Our Price: $1,330.51
420 cc displacement engine; 12.92 hp. 7,000 watt, gasoline powered electric start portable generator with Premium DeWalt engine. Idle control conserves fuel and reduces noise on the job site. Smart Run time meter shows fuel level and time remaining. Wattage meter gives fast feedback on how much power is being used. Electric start battery included provides hassle free start up. Covered outlets for protection from the elements and rugged working conditions. Carb compliant. Hardened 1-1/4" steel tube cradle for added durability and strength. Hour meter tracks maintenance intervals. Fold down/locking handle for sturdy portability and compact storage. 7.5 gallon fuel tank capacity. Low oil level shutdown automatically safeguards engine from damage. All circuits GFCI protected offers neutral bond and full generator GFCI (ground fault circuit protection) on all outlets. Never flat, durable wheels for maximum portability and durability. Weighs 192 lbs. Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 13 MHP (Maximum Horsepower), 389cc 4 stroke OHV gasoline engine. Surge 7500 Watt Output. Rated 6500 Watt Output. (2) 120 volt/20 amp AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock receptacles. (1) 12 volt 8.3 amp DC receptacle. (1) Male Twist Lock Plug included. 12 volt DC power cord with plug and Alligator clips included. Recoil start/recoil. 7.5 gallon fuel tank. 75 decibel sound rating at 23 ft (7m). 12 hour run time (at 50 percent load). Low oil engine shutdown protection. Automatic voltage regulator to protect tools/equipment form damage. Engine/Generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved. Field tested and proven durable and dependable. Ideal for the farm, contracting work, emergencies, homeowners, job sites or special events. 15 MHP (Maximum Horsepower), 420cc 4 stroke OHV gasoline engine. Surge 8650 Watt AC output. Rated 8000 Watt AC output. (2) 120 volt 20 amp GFCI AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock Receptacle. (2) 12 volt 8.3 amp DC receptacle. (1) Male Twist lock plug included. 12v DC power cord with plug and alligator clips included. 7.5 gallon fuel tank. 12 hour run time (at 50 percent load). 75 decibel sound rating at 23 ft (7m). Recoil start. Low oil engine shutdown protection. Automatic voltage regulator to protect tools/equipment from damage. Engine/generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved.
GENERATOR XT8000E WATT 49STATE Generac GP15000E Portable Generator GENERATOR XD5000W WATT 50STATE
This compact, yet durable generator offers premium quality power that is ideal for emergency backup power and jobsites. The Generac OHV engine with splash lubrication provides a long engine life. Single touch electric start provides hassle-free start-up, battery included. Idle control reduces noise and conserves fuel for extended run times. Low oil level shutdown automatically safeguards engine from damage. Lighted PowerBar easily monitors power usage. Hour meter tracks usage and monitors maintenance cycles. Large capacity steel fuel tank with incorporated fuel gauge provides durability and extended run times. Covered outlets provide added protection from the environment and rugged working conditions. CSA certified. Over 3000-hour engine life Fuel gauge Hardened steel tube cradle Fixed handles Low tone muffler. Hardened steel tube cradle. Steel fuel tank with incorporated fuel gauge. Low oil shutdown. Hour meter with maintenance resets. Circuit breaker protected outlets. Dimensions: L x W x H (in.) 48 1/2 x 30 3/4 x 38 1/2. Battery included but not cord. Specs: Engine OHVI; Engine Displacement (cc) 992; Rated Watts 15,000; Surge Watts 22,500; Fuel Capacity (gal.) 16; Start Type Electric. Low Oil Shutdown. Battery Part no. 0D4575 12 volt 35 Ah generator battery. The sturdy steel frame features an integrated lifting eye for easy transport and on-site security. 6 percent total harmonic distortion for smooth operation of tools, appliances, even sensitive electronics. 1-1/4" steel cradle for added strength and durability. 12 gallon fuel tank provides a long run time of 32.4 hours at 50 percent load. Yanmar LW Series 435 cc air cooled direct injection, industrial grade diesel engine. Battery and portability kit including handles, wheels and front foot Sold Separately.
   
 
1