|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion resistant material. Connects FPT to FPT. With ball socket.
|
All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT.
|
Plated steel; corrosion resistant steel for long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
Connects FPT to FPT. Use thread sealant tape on all male threads for air tight connections.
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT.
|
Plug 1/4". I/M x 3/8" MNPT.
|
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines comes directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks.
|
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Plug 3/8". TF x 1/4" FNPT.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
|
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections.
|
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marksman spout for easy precision application. Professional grade formula. Lubricates and protects to extend tool life. Quickly removes gum and sludge. Prevents rust.
|
Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
|
Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Popular for general rough framing and construction.
|
Popular for general rough framing and construction.
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for nailing drywall to wood.
|
Used for nailing drywall to wood.
|
Used for nailing drywall to wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Lubricates and protects internal tool parts. Formulated for use with in-line oilers. Removes moisture and provides lubrication. Protects tools against high speeds and shock loads. Use on all pneumatic tools and equipment.
|
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12-1/2 gauge. 5/16 head. Used for nailing drywall to wood.
|
Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread. Holds chuck to tire valve while inflating.
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Cleans and restores pneumatic tool parts. Breaks loose deposits that create friction. Reaches deep into small recesses to leave a protecting film of lubrication. Can be used as in-line lubricant. Removes moisture. An effective antifreeze. Protects tools from freezing down to -25 degreesF.
|
Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life.
|
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
|
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life.
|
Turn ball type drain valve. 1/4" NPT male thread.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
|
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
|
Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose; (1) barb x barb hose splicer for 3/8" hose & (3) Clamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Built-in shut-off valve cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Extension for hard-to-reach dual wheel valves on tractors, trucks or bus.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks.
|
Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass
|
Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies.
|
Safety blow gun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI.
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
The checkered head on these nails helps to hold paint and the strong slim bodies drive better than aluminum trim nails. MADE IN USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
|
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure. Conforms to No.1001 OSHA regulation. Epoxy finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
|
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released.
|
3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
|
Die-cast body. 1/4" air inlet.
|
Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
|
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
|
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hillman Trim Nail, Series: 122536, 1-1/4 in, 13 ga, Steel, Zinc Plated, For Small Wood and Craft Projects
|
Hillman Trim Nail, Series: 122537, 1-1/4 in, 13 ga, Steel, Brass Plated, For Small Wood and Craft Projects
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
|
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
(1) One Each: 1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235).
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI.
|
Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet.
|
Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
|
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Popular for general rough framing and construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Popular for general rough framing and construction.
|
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
|
Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
Use for asphalt shingles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator nozzle.
|
Light-weight aluminum body with OSHA compliant safety nozzle. 40 CFM
|
Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
Made from .101" wire, with 3/16" flat heads. Nails have "BULLSEYE" heads to help hold paint. MADE IN USA
|
Used for nailing drywall to wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for nailing drywall to wood.
|
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12-1/2 gauge. 5/16 head. Used for nailing drywall to wood.
|
Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT.
|
Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel.
|
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses.
|
Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components.
|
Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components.
|
Prevents moisture coming into the tool from freezing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass.
|
Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
|
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass.
|
Lifan's universal wheel kit for all "open-frame" style generators and water pumps. Includes 1 axle, 2 wheels, 2 handles, and 2 legs. All bolts, nuts and cotter pins included.
|
All brass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slim diameter hardwood trim nails made from high carbon steel wire to ensure good driving into oak, birch, walnut and other hardwoods.
|
Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and (1) 20 1/4 oz plastic paint cup.
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The thick, uniform zinc coating is compatible with aluminum, and the strong steel shank drives much better than aluminum nails. Double-dipped in molten zinc. Applications: Ideal for applying painted aluminum trim coil, soffit and fascia.
|
Parallel connection box for Energy Storm ESI2000 and ESI2600IER Inverters only. Duo-Power box allows combining the power of two Energy Storm digital inverters together for maximum wattage. Mix and match two different sizes unlike our competition. All power cords and digital signal cables included.
|
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hardboard, trim and wood. Double hot dipped galvanized. Sturdy shank drives easily. Checkered head holds paint.
|
All brass.
|
72 cc single cylinder 2 hp. 2-stroke, air cooled. Recoil start. 12V DC output. Two 120 V outlets. Runs 8.5h at half load. Max output: 1200W/60HZ. Rated output: 900W/60HZ.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass.
|
3 MHP gas generator with recoil start.
|
Lifan portable generator specs: 1500 w surge, 1200 w rated, 2-120 v/20 amp AC receptacle. 1-12 v/8.3 amp DC receptacle. 1.5 MHP (97.7 cc) Lifan 4 stroke gasoline engine, recoil start, 1.00 gallon fuel tank, 6 hour run time (at 50 percent load). 63 decibles sound rating.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4-stroke, OHV, air cooled. Recoil start. 12V DC output without voltmeter. Two 120V outlets. Max output: 2200W/60HZ. Rated output: 1600W/60HZ.
|
Lifan portable generator specs: 2200 w surge, 1800 w rated, 2-120v/20 amp AC receptacle, 4 MHP (118cc) Lifan 4-stroke gasoline engine, recoil start 1.98 gallon fuel tank, 7.5 hour run time (at 50 percent load) 74 decibels sound rating.
|
Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 7 MHP (Maximum Horsepower), 212cc 4 stroke OHV gasoline engine. Surge 4100 Watt Output. Rated 3500 Watt Output. (3) 120 volt/20 amp AC receptacles. Recoil start/recoil and electric start. 4 gallon fuel tank. Quiet operation 65 decibel sound rating at 23 ft (7m). 12 hour run time (at 50 percent load). Low oil engine shutdown protection. EPA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7MHP gas generator with recoil start. Carb & CSA approved.
|
208cc engine with 7 hp. Peak wattage 3050 watts, rated output 2500 watts. 4 gallon tank with 11 hour run time. 1/120V 20A duplex, 1 cigarette, 2/USB outlets. Digital hour meter. Ford FG3050P "U" series generator.
|
Max. output 5250W. Rated output 4250W. Single cylinder 7 HP engine, 224cc 4 stroke, OHV, air cooled. Two 120 volt outlets, one 120v/240v twist lock, 12 volt DC output and 3 in-1 digital meter. Pulll start.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
105cc 4-stroke OHV gasoline engine. AC power output with a Pure Sine Wave Distortion of 2 percent or less. Rated 1600 watt output; surge 2000 watt output. (2) 120 volt/20 amp AC receptacles; (1) 12 volt/8.3 amp DC receptacle. Recoil start with T.D.I. ignition. 0.92 gallon fuel tank. Safely power all of your sensitive audio and video electronics such as laptops, computers, LCD and Plasma televisions, surround sound systems, video consoles, sensitive tools and cell phone chargers without the risk of damage. The compact design allows for easy transporting and storage. This unit is great for camping, RVing, tailgating or general use around the house. Low oil engine shutdown protection. Auto idle feature (Power On Demand). AC overload protection. Exhaust spark arrestor for safe and legal operation in national parks. Super quiet 60 decibel sound rating at 23 ft. (7m). 12V DC power cord with plug and alligator clips included.
|
Max. output: 5250W/60HZ. Rated output 4250W/60HZ; OHV single cylinder, 4 stroke, air cooling. Recoil start. Two 120 volt outlets; one 120 volt twick lock. One 30A RV outlet; 12 volt DC output. 3 into 1 digital meter. Uses gasoline and propane.
|
Field tested and proven durable and dependable. Universal wheel kit (LFWKT) can be used with the LF4000 and LF4000-CA as its mobility kit. Perfect fit for the farm, contracting work, emergencies, homeowner, job sites or special events. Features 7 MHP (Maximum Horsepower), 212 cc 4-stroke OHV gasoline engine. Surge 4000 Watt AC output; Rated 3500 Watt AC output. (2) 120 volt 20 amp GFCI AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock Receptacle. (1) 12 volt 8.3 amp DC Receptacle. 4 gallon fuel tank. 12 hour run time (at 50 percent load). 65 Decibel sound ratings at 23 ft (7m). Recoil start. Low oil engine shutdown protection. Automatic voltage regulation to protect tools/equipment from damage. Engine/generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max. output 6000W/60HZ. Rated output 5000W/60HZ. Single cylinder 10 hp engine. 4 stroke, OHV, air cooled. Four 120 volt outlets, one 120v/240v twist lock. One 120v twist lock. Recoil start. 12 volt DC output. 3 into 1 digital meter.
|
Hardened steel tube cradle. Steel fuel tank with incorporated fuel gauge. Locking fold-down handles and wheel kit. Low-oil shutdown. Hour meter with maintenance resets. Specs: AC Rated Output - 5500 Watts; AC Maximum Output - 6875 Watts; AC Voltage - 120V/240V; AC Frequency - 60 Hz; Rated VAC Amperage 45.8/22.9; Max Rated VAC Amperage 57.3/28.6; Engine Type and Displacement - OHV 389cc; RPM - 3600; Starting Method ? Recoil Pull Start; Fuel Capacity - 7.2 Gallons (27.3 liters); Run Time at 1/2 Load - 10 Hours; Dimensions L x W x H (inches); 27.25 x 27 x 25. Unit Weight - 170.9 lbs. (81.3 kg.).
|
Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 13 MHP (Maximum Horsepower), 389cc 4 stroke OHV gasoline engine. Surge 5700 Watt Output. Rated 5000 Watt Output. (3) 120 volt/20 amp AC receptacles. Recoil start/recoil and electric start. 6.5 gallon fuel tank. 75 decibel sound rating at 23 ft (7m). 10 hour run time (at 50 percent load). Low oil engine shutdown protection. EPA approved. This generator does not provide 240V receptacle capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13 MHP gas generator with recoil start. Carb & CSA approved.
|
13 MHP gas generator with electric and recoil start.
|
15HP, 420cc 4 stroke OHV gasoline engine. Surges 8100-E watt output; rated 7500 watt output. This quality generator is a perfect fit for homeowners, job sites, special events, parties, weddings etc. Features recoil and electric start, (3) 120 volt/20 amp AC receptacles, (1) 120V/240V 30 Amp AC receptacle, (1) 12V/0.3 Amp DC receptacle, and 6.5 gallon fuel tank. Low oil engine shutdown protection. 8 hour run time (at 50 percent load). 75 decibel sound ratings at 23 ft (7m). EPA approved. CARB compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quieter, smarter, innovative inverter generator. Lets you bring power wherever life takes you. From tailgating parties to camping trips and beyond. Quiet power. The iQ2000 uses a different type of alternator than standard generators. A digital inverter module converts the raw power produced from DC to AC power. Engine speed varies depending on electrical demand, which significantly reduces noise levels. The run time remaining display shows you how long before you need to refuel at a glance. No more guesswork or running out when you least expect it. The exclusive Powerbar monitors and instantly displays the wattage you're producing at the moment, so you'll always know how much capacity you have. The generator status indicators alert you to low fuel, low oil, overload or overheating. Parallel ready lets you connect two iQ2000 generators to give you twice the power when you need it. Parallel Kit Not Included. PowerDial with one simple to use integrate start, run and stop function. 3 modes of operation; Turbo, Standard and Economy mode for which ever best fits your needs.
|
For ideal performance from this "Built Ford Tough" 7750 peak watts, gasoline generator. Simple pushbutton, electric-start powered by its own maintenance free battery to the huge 420cc, engine. This EPA, CARB and CSA certified machine has been designed for years of use. Removable control panel with 25' mega-duty extension cord that allows user to actually move both the starter switch and two 120 v AC duplex outlets for remote use up to 25' from the main unit and out of the weather. Also included is a 120/240v AC twist-lock and a 12v DC outlet. The 6.8 gallon fuel capacity offers up to 9 hours of operating time on a single tank of gasoline. Created to operate up to four major appliances at one time. 12" no-flat, easy-roll tires and the fold-down counter-balanced padded handle allows for on-top storage when not in use. Digital hour meter and an easy-to-read gas gauge, GFCI outlet protection with weather protector rubber covers on all primary outlets and a zinc-coated fuel tank interior that helps prevent interior tank corrosion.
|
This generator is ideal for the job site, home use and outdoor activities. Featuring a strong powder coat steel frame, fold down locking handle and cutting edge technology, this unit makes an ideal addition to you assortment of must have portable power. 7750 watts peak; 6250 watts rated (Gas). 6250 watts peak; 5950 watts rated (LPG). Switch and Go while the generator is running; switch from LPG to gas or from gas to LPG. Electric push start with recoil back-up, battery included. 420cc OHV engine. Four 120 volt receptacles. One 120 volt twist-lock receptacle. One 120/240 volt twist-lock receptacle. One 12 volt DC output. 3-N-1 digital meter. Circuit breakers. 10" no flat tires.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
420 cc displacement engine; 12.92 hp. 7,000 watt, gasoline powered electric start portable generator with Premium DeWalt engine. Idle control conserves fuel and reduces noise on the job site. Smart Run time meter shows fuel level and time remaining. Wattage meter gives fast feedback on how much power is being used. Electric start battery included provides hassle free start up. Covered outlets for protection from the elements and rugged working conditions. Carb compliant. Hardened 1-1/4" steel tube cradle for added durability and strength. Hour meter tracks maintenance intervals. Fold down/locking handle for sturdy portability and compact storage. 7.5 gallon fuel tank capacity. Low oil level shutdown automatically safeguards engine from damage. All circuits GFCI protected offers neutral bond and full generator GFCI (ground fault circuit protection) on all outlets. Never flat, durable wheels for maximum portability and durability. Weighs 192 lbs.
|
Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 13 MHP (Maximum Horsepower), 389cc 4 stroke OHV gasoline engine. Surge 7500 Watt Output. Rated 6500 Watt Output. (2) 120 volt/20 amp AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock receptacles. (1) 12 volt 8.3 amp DC receptacle. (1) Male Twist Lock Plug included. 12 volt DC power cord with plug and Alligator clips included. Recoil start/recoil. 7.5 gallon fuel tank. 75 decibel sound rating at 23 ft (7m). 12 hour run time (at 50 percent load). Low oil engine shutdown protection. Automatic voltage regulator to protect tools/equipment form damage. Engine/Generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved.
|
Field tested and proven durable and dependable. Ideal for the farm, contracting work, emergencies, homeowners, job sites or special events. 15 MHP (Maximum Horsepower), 420cc 4 stroke OHV gasoline engine. Surge 8650 Watt AC output. Rated 8000 Watt AC output. (2) 120 volt 20 amp GFCI AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock Receptacle. (2) 12 volt 8.3 amp DC receptacle. (1) Male Twist lock plug included. 12v DC power cord with plug and alligator clips included. 7.5 gallon fuel tank. 12 hour run time (at 50 percent load). 75 decibel sound rating at 23 ft (7m). Recoil start. Low oil engine shutdown protection. Automatic voltage regulator to protect tools/equipment from damage. Engine/generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This compact, yet durable generator offers premium quality power that is ideal for emergency backup power and jobsites. The Generac OHV engine with splash lubrication provides a long engine life. Single touch electric start provides hassle-free start-up, battery included. Idle control reduces noise and conserves fuel for extended run times. Low oil level shutdown automatically safeguards engine from damage. Lighted PowerBar easily monitors power usage. Hour meter tracks usage and monitors maintenance cycles. Large capacity steel fuel tank with incorporated fuel gauge provides durability and extended run times. Covered outlets provide added protection from the environment and rugged working conditions. CSA certified.
|
Over 3000-hour engine life Fuel gauge Hardened steel tube cradle Fixed handles Low tone muffler. Hardened steel tube cradle. Steel fuel tank with incorporated fuel gauge. Low oil shutdown. Hour meter with maintenance resets. Circuit breaker protected outlets. Dimensions: L x W x H (in.) 48 1/2 x 30 3/4 x 38 1/2. Battery included but not cord. Specs: Engine OHVI; Engine Displacement (cc) 992; Rated Watts 15,000; Surge Watts 22,500; Fuel Capacity (gal.) 16; Start Type Electric. Low Oil Shutdown. Battery Part no. 0D4575 12 volt 35 Ah generator battery.
|
The sturdy steel frame features an integrated lifting eye for easy transport and on-site security. 6 percent total harmonic distortion for smooth operation of tools, appliances, even sensitive electronics. 1-1/4" steel cradle for added strength and durability. 12 gallon fuel tank provides a long run time of 32.4 hours at 50 percent load. Yanmar LW Series 435 cc air cooled direct injection, industrial grade diesel engine. Battery and portability kit including handles, wheels and front foot Sold Separately.
|
|
|
