Home > POWER TOOLS & ACC > POWER EQUIPMENT
Choose a sub category:
POWER GENERATORS
Sort By:
1
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 12-135 Air Line Nipple Tru-Flate 12-335 Air Line Plug
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-535 Air Hose Bushing Tru-Flate 21-143 Air Hose Fitting
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Stanley THREADTAPE Thread Sealant Tape
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. Properly seals all male threaded connections to prevent air leaks.
Tru-Flate 21-222 Air Hose Fitting Tru-Flate 21-242 Air Hose Fitting Tru-Flate 21-423 Barb Hose Splicer
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 21-505 Air Line Coupling Tru-Flate 21-467 Barb Hose Splicer
Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 12-425 Air Line Plug Tru-Flate 12-603 Air Line Plug Plews/Edelmann 12-227/6  Air Compressor Hose Fittings
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plug 1/4". I/M x 3/8" MNPT.
Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Plews/Edelmann 12-611  Air Compressor Hose Fittings Stanley TIRE-14F Tire Chuck Tru-Flate 12-605 Air Line Plug
Plug 3/8". TF x 1/4" FNPT. Plated steel; corrosion resistant steel for long life. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Plews 21-557 Drain Cock Plews/Edelmann 12-267/6  Air Compressor Hose Fittings
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Plug 1/4". I/M 3/8" ID slim.
Stanley 38M-14M Hex Reducer Nipple Plews/Edelmann 12-265  Air Compressor Hose Fittings PLUG 3/8IN TF X 3/8IN FNPT
Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Plug 1/4". I/M x Barb 1/4" ID. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Stanley AP-38F Auto Hose Adapter
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter Tru-Flate 12-705 Air Line Plug
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male North American 9402 Speedway Air Inflation Kit SPLICER HOSE REUSABLE 1/4IN
Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Ideal for inflating toys, rafts, sports equipment and more. Includes 1/4" NPT female connector, 1/4" x 1/8" connector, inflation needle, tapered nozzle and extension tube. Use with any compressor and hose.
Mintcraft FDQ910 Inflation Kit HOSE AIR END REUSABLE 1/4IN   Tru-Flate 13-235 Industrial Air Line Coupler
Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Tru-Flate 13-225 Air Line Coupler Tru-Flate 17-355 Snap Clip On Air Line Chuck Stanley IC-14M Industrial Hose Adapter
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections.
Stanley IC-14F Industrial Hose Adapter Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler
Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
SPLICER HOSE REUSABLE 3/8IN   COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 13-135 Air Line Coupler Tru-Flate 13-125 Air Line Coupler
Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley Industrial IHKIT-14F Hose Coupler Kit Stanley HREPAIR-38 Hose Splice Kit Bostitch BTFP72327 Ball Drain Valve
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose ; (1) barb x barb hose splicer for 3/8" hose &  (3) Clamps. Turn ball type drain valve. 1/4" NPT male thread.
SPLICER HOSE REUSABLE 1/2IN   HOSE AIR END REUSABLE 1/2IN   Tru-Flate 13-201 Coupler/Plug Set
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 41-300 Hose Repair Kit Stanley TEE-14F Tee Fitting Nati 9390 Air Hose 25 ft
Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi.
Plews/Edelmann 13-138 Hose Coupling Tru-Flate 13-335 Air Line Coupler HOSE AIR END REUSABLE 3/8IN
Coupler 1/4". TF x 3/8" FNPT. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-605 Barb Air Line Swivel Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Stanley 3WAY-RND 3-Way Round Air Line Manifold
Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure. Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum.
Plews/Edelmann 13-237 Hose Coupling Plews 4-25E-RET Recoil Air Hose Tru-Flate 13-101 Coupler/Plug Set
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 13-325 Air Line Coupler HOSE AIR END REUSABLE 1/4IN   Bostitch Prozhoze Reusable Hose Repair Kit
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
Tru-Flate 13-301 Coupler/Plug Set HOSE AIR ED RUSBL W/SWVL 3/8IN Mintcraft DZA019 Hose Coupler Set
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler.
HOSE AIR ED RUSBL W/SWVL 1/2IN Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru-Flate 13-425 Air Line Coupler
Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Tru-Flate 13-435 Air Line Coupler Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Tru-Flate 13-537 Air Line Coupler Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-603 Hose Coupling
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews/Edelmann 13-605 Hose Coupling Tru-Flate 21-707 Safety Valve Tru-Flate 13-401 Coupler/Plug Set
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-613 Air Line Coupler HOSE AIR END REUSABLE 3/8IN
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews 576-25A Air Hose Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-527 Air Coupler
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews 4-50E-RET Recoil Air Hose Tru-Flate 12-537 Air Hose Plug COUPLER-PLUG SET 4PC
COUPLER-PLUG SET 4PC
Our Price: $14.26
Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs.
Nati 9411 Air Hose 25 ft HOSE AIR POLY BLUE 1/4INX25FT Tru-Flate 24-801 Air Line Pressure Gauge
Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. PSI 0-200  0-14 kg/cm2; mounting back.
Tru-Flate 13-713 Air Line Coupler Plews 554-50A-10 Air Hose Plews 576-50A Air Hose
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Quality  multi-purpose air hose. Light weight, flexible, kink-resistant design. 300 PSI. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends.
Nati 9389 Air Hose 50 ft Bostitch BTFP72326 Mini Regulator and Gauge Kit HOSE AIR 1/4INX25FT
HOSE AIR 1/4INX25FT
Our Price: $18.26
Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi. Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi
Nati 50059 Air Hose 25 ft Plews 41-135 Air Line Regulator with Gauge HOSE AIR 3/8INX25FT
HOSE AIR 3/8INX25FT
Our Price: $19.96
Extremely lightweight and flexible air hose provides ideal performance in all climates. Solid brass fittings: 1/4" - 18 NPT. Oil and abrasion resistant. Heavy duty braided reinforcement. Working temperature range from 30 to 150 degrees F. Maximum working pressure of 250 psi. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends.
HOSE AIR 3/8X50FT             Plews/Edelmann 41-101 Air Tool Oilers HOSE AIR 1/4INX50FT
HOSE AIR 3/8X50FT
Our Price: $20.91
HOSE AIR 1/4INX50FT
Our Price: $23.43
Ultra Air takes hybrid to a new level, offering increased cold weather flexibility over competitive hoses. When uncoiled, this hose lays flat making it easier to use with no interruption in air flow or tripping hazards. Lighter in weight than rubber and more flexible than PVC; features bend restrictors. Stays flexible, -40 to 150 degrees F. 300 PSI. Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers.
Plews 12-50E Poly Air Hose Nati 9412 Air Hose 50 ft Prohoze HOPB1450 Air Hose
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi. All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life.
Tru-Flate 24-343 Manual Mini Air Line Filter Plews 576-100A-5 Air Hose Thermoid 522-25 Coupled Air Hose
Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
Thermoid 538-25 Coupled Air Hose Mintcraft ATA-052-1 Hose Plug Mintcraft ATA-053-A Hose Plug
Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure. High speed steel. Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses.
Sta-Lube SL22133 Air Compressor Oil Stanley Industrial Air Compressor Regulator with Gauge HOSE AIR 3/8INX50FT
HOSE AIR 3/8INX50FT
Our Price: $33.46
Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life. Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge
Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge REGULATR TOOL AT-HAND INLN AIR North American 7637 Speedway Air Ratchet Wrenches
Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8".
Prohoze HOPB14100 Air Hose Plews 12-100E Air Hose Tru-Flate 41-175 Air Compressor Accessory Kit
All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment.
AIR HOSE PROFLEX 1/4IN X 50FT Abbott Rubber 1502-38X50MM Air Hose 50 ft Prohoze PRO-1450 Air Hose
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Rubber hose, durable, abrasion resistant. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions.
HOSE AIR 1/4INX100FT          Ingersoll-Rand EC400-NS  Needle Scaler Plews 13-50AE Air Hose
HOSE AIR 1/4INX100FT
Our Price: $46.49
Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. For use with the Ingersoll Rand 114GQC Air Hammer. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI.
Edge 3107G Pneumatic Die Grinder Thermoid 522-50 Coupled Air Hose Plews 552-50AK-5 Air Hose Kit
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure. Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in  garage, shop, industry,  or home. Includes: Safety blow gun, coupler and plugs, 5 different tips.
Tru-Flate 41-907 Air Tank Conversion Kit Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge Thermoid 538-50 Coupled Air Hose
Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
AIR HOSE PROFLEX 3/8IN X 50FT Ingersoll-Rand 114GQC Air Hammer Tru-Flate 24-301 Manual Compact Air Line Filter
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces.
Ingersoll-Rand 301B Air Angle Die Grinders Tru-Flate 24-311 Manual Air Line Filter Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant
Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently.
Mintcraft ATA-050 Air Hose Connector HOSE AIR 3/8INX100FT          Mintcraft TA-054 Air Hose End
HOSE AIR 3/8INX100FT
Our Price: $63.00
Brass. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Mintcraft ATA-057 Hose Plug Abbott Rubber 1010-03825-50-4MM Quick Connect Air Hose 50 ft Mintcraft ATA-0561 Air Line Connector
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Rubber hose, durable, abrasion resistant. Brass.
Mintcraft ATA-0243L Barb Hose Splicer Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge Ingersoll-Rand 317A Hi Speed Sanders
All brass. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz. For small jobs and hard to reach places. Ideal for light sanding, feather edging and rust removal. 18,000 rpm, 0.45 hp (0.35 kw) motor. Easy to handle, compact and lightweight. Built-in power regulator.
AIR HOSE PROFLEX 1/4IN X 100FT Edge 3101G Pneumatic Die Grinder Ingersoll-Rand 170G Air Ratchet Wrenches
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT.
Prohoze PRO-14100 Air Hose Abbott Rubber 1025-0750R-50-CRS 2-Lug Air Hose 50 ft Edge 311G Dual Action Pneumatic Sander
Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions. Rubber hose, durable, abrasion resistant. Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8".
Plews 13-100AE Air Hose Plews 510HR-RET Retractable Air Hose Ingersoll-Rand EC300  Air Nibbler
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. All steel construction for industrial applications. Spring powered auto rewind. Ideal for mounting of wall, floor or ceiling. Guide arm adjustable for different angles. Valve assembly handles up to 250 PSI and 25 cfm. Locking ratchet brake. The Ingersoll Rand Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges.
Edge 300G Random Pneumatic Sander Ingersoll-Rand Edge 236G Air Impact Wrench Ingersoll-Rand EC112  Air Drills
Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords. Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. The Ingersoll Rand Edge 1/2" air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done.
Ingersoll-Rand Edge 7811G Reversible Air Drill Ingersoll-Rand 107XPA Air Ratchet Wrenches Ingersoll-Rand 231G Air Impact Wrench
Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight. Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16". Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI.
Ingersoll-Rand 231C Air Impact Wrench Ingersoll-Rand 1077XPA Air Ratchet Wrenches Mintcraft ATA-055 Quick Coupler
Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control. Variable speed lever style throttle. Advanced head design for extra durability. Up to 54 ft-lbs. torque. Specs: 160 RPM free speed, 3/8" bolt cap, 4 CFM, 19 CFM at load, 94.4/105.4 dBA, 1/4" air inlet. All brass.
Ingersoll-Rand 2100G Composite Air Impact Wrench Ingersoll-Rand EB2125X Air Impact Wrench Plews 545HR-RET Reel Air Hose
Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs. 690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A. Features all-steel construction and a spring tension brake to prevent accidental unwinding. Mounts in either direction. Polyurethane with dual output fittings. 200 PSI working pressure.
Mintcraft ATA-056 Quick Coupler Ingersoll-Rand 212 General Duty Air Impact Wrench Pulsar PG1202S Portable Generator
All brass. Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechanism. Pressure feed lubrication system. 72 cc single cylinder 2 hp. 2-stroke, air cooled. Recoil start. 12V DC output. Two 120 V outlets. Runs 8.5h at half load. Max output: 1200W/60HZ. Rated output: 900W/60HZ.
Ingersoll-Rand Edge Pro 2317G Air Impact Wrench Kit Ingersoll-Rand 2115TIMAX Industrial Duty Air Impact Wrench HOSE AIR BULK 1/4INX250FT
HOSE AIR BULK 1/4INX250FT
Our Price: $234.70
Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance.
Ingersoll-Rand 3445MAX Pneumatic Angle Grinder ThunderGun 232TGSL Air Impact Wrench GENERATOR 3MHP 2000W RECOIL
Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet. As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. 3 MHP gas generator with recoil start.
Equipsource EnergyStorm ES1500 Portable Generator WRENCH IMPACT 1/2IN 930FT/LBS Pulsar PG2000 Portable Generator
Lifan portable generator specs: 1500 w surge, 1200 w rated, 2-120 v/20 amp AC receptacle. 1-12 v/8.3 amp DC receptacle. 1.5 MHP (97.7 cc) Lifan 4 stroke gasoline engine, recoil start, 1.00 gallon fuel tank, 6 hour run time (at 50 percent load). 63 decibles sound rating. Powerful and durable. Provides 1,350 lbs of torque and 930 ft-lbs of max reverse torque powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism. Weighs only 4.6 lbs, providing less weight so you can work harder and faster for longer periods of time. 4-stroke, OHV, air cooled. Recoil start. 12V DC output without voltmeter. Two 120V outlets. Max output: 2200W/60HZ. Rated output: 1600W/60HZ.
HOSE AIR BULK 3/8INX250FT     Equipsource ES2200 Portable Generator GENERATOR RES 4000W 7HP RECOIL
HOSE AIR BULK 3/8INX250FT
Our Price: $323.72
Lifan portable generator specs: 2200 w surge, 1800 w rated, 2-120v/20 amp AC receptacle, 4 MHP (118cc) Lifan 4-stroke gasoline engine, recoil start 1.98 gallon fuel tank, 7.5 hour run time (at 50 percent load) 74 decibels sound rating. Perfect fit for emergencies, homeowners, job sites, special events, parties or weddings. 7 MHP (Maximum Horsepower), 212cc 4 stroke OHV gasoline engine. Surge 4100 Watt Output. Rated 3500 Watt Output. (3) 120 volt/20 amp AC receptacles. Recoil start/recoil and electric start. 4 gallon fuel tank. Quiet operation 65 decibel sound rating at 23 ft (7m). 12 hour run time (at 50 percent load). Low oil engine shutdown protection. EPA approved.
Equipsource EnergyStorm ESI1000I Inverter Generator GENERATOR 7MHP 3500W RECOIL   HOSE AIR BULK 1/2INX250FT
HOSE AIR BULK 1/2INX250FT
Our Price: $461.30
"Clean power" of less than 2 percent total harmonic distortion to safely power sensitive electronics. Specs: 1000 w surge, 900 w rated, 1-120v/20 amp AC receptacle, 1-12v/8.3 amp DC receptacle, 53cc 4-stroke gasoline engine, recoil start, 0.79 gallon fuel tank, 5 hour run time (at 50 percent load), 60 decibels sound rating. 7MHP gas generator with recoil start. Carb & CSA approved.
Ingersoll-Rand 261 Air Impact Wrench GENERATOR GAS 3050W-PEAK 2500W Pulsar PG4500 Portable Generator
Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length. 208cc engine with 7 hp. Peak wattage 3050 watts, rated output 2500 watts. 4 gallon tank with 11 hour run time. 1/120V 20A duplex, 1 cigarette, 2/USB outlets. Digital hour meter. Ford FG3050P "U" series generator. Max. output 5250W. Rated output 4250W. Single cylinder 7 HP engine, 224cc 4 stroke, OHV, air cooled. Two 120 volt outlets, one 120v/240v twist lock, 12 volt DC output and 3 in-1 digital meter. Pulll start.
INVERTER/GEN 2000W 50STATE-CSA Ingersoll-Rand 2145QIMAX Air Impact Wrench Ingersoll-Rand 285B-6 General Duty Air Impact Wrench
105cc 4-stroke OHV gasoline engine. AC power output with a Pure Sine Wave Distortion of 2 percent or less. Rated 1600 watt output; surge 2000 watt output. (2) 120 volt/20 amp AC receptacles; (1) 12 volt/8.3 amp DC receptacle. Recoil start with T.D.I. ignition. 0.92 gallon fuel tank. Safely power all of your sensitive audio and video electronics such as laptops, computers, LCD and Plasma televisions, surround sound systems, video consoles, sensitive tools and cell phone chargers without the risk of damage. The compact design allows for easy transporting and storage. This unit is great for camping, RVing, tailgating or general use around the house. Low oil engine shutdown protection. Auto idle feature (Power On Demand). AC overload protection. Exhaust spark arrestor for safe and legal operation in national parks. Super quiet 60 decibel sound rating at 23 ft. (7m). 12V DC power cord with plug and alligator clips included. Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger.
Generac GP 5939 Portable Generator GENERATOR PRO 4000W 7HP RECOIL Pulsar PG6000 Portable Generator
Hardened steel tube cradle. Steel fuel tank with incorporated fuel gauge. Locking fold-down handles and wheel kit. Low-oil shutdown. Hour meter with maintenance resets. Specs: AC Rated Output, 5kW / 5000 Watts; AC Maximum Output - 6.25 kW / 6250 Watts; AC Voltage - 120V/240V; AC Frequency - 60 Hz; 120 VAC Amperage Rated 41.6/Max 52.1; 240 VAC Amperage Rated 20.8/Max 26.0; Engine Type and Displacement - OHV Single Cylinder 389cc; Oil Capacity - 1.1 Qt. (1.16 liter); Low Oil Shutdown - Standard; Fuel Capacity - 6.6 Gallons (24.98 liters); Run Time at 1/2 Load - 10 Hours; Dimensions L x W x H (inches); 33-1/2x 26-1/2 x 27-1/2. Unit Weight - 180 lbs. (81.6 kg.). Field tested and proven durable and dependable. Universal wheel kit (LFWKT) can be used with the LF4000 and LF4000-CA as its mobility kit. Perfect fit for the farm, contracting work, emergencies, homeowner, job sites or special events.  Features 7 MHP (Maximum Horsepower), 212 cc 4-stroke OHV gasoline engine. Surge 4000 Watt AC output; Rated 3500 Watt AC output. (2) 120 volt 20 amp GFCI AC receptacles. (1) 120 volt/240 volt 30 amp AC Twist Lock Receptacle. (1) 12 volt 8.3 amp DC Receptacle. 4 gallon fuel tank. 12 hour run time (at 50 percent load). 65 Decibel sound ratings at 23 ft (7m). Recoil start. Low oil engine shutdown protection. Automatic voltage regulation to protect tools/equipment from damage. Engine/generator isolation for less vibration. Heavy duty roll cage for maximum protection. EPA approved. Max. output 6000W/60HZ. Rated output 5000W/60HZ. Single cylinder 10 hp engine. 4 stroke, OHV, air cooled. Four 120 volt outlets, one 120v/240v twist lock. One 120v twist lock. Recoil start. 12 volt DC output. 3 into 1 digital meter.
GENERATOR RES 5000W13HP RECOIL Generac GP6500 Portable Generator