Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > SPRAY GUNS
Choose a sub category:
AIR COMPRESSORS AIR COMPRESSORS AIR TOOLS
AIR TOOLS AIR TOOL ACCESSORIES AIR TOOL ACCESSORIES
AIR COMPRESSOR HOSES AIR COMPRESSOR HOSES AIR COMPRESSOR HOSE FITTINGS
AIR COMPRESSOR HOSE FITTINGS BLOW GUNS BLOW GUNS
AIR COMPRESSOR ACCESSORIES AIR COMPRESSOR ACCESSORIES SPRAY GUNS
SPRAY GUNS AIR TANKS AIR TANKS
Sort By:
1
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 12-135 Air Line Nipple Tru-Flate 12-335 Air Line Plug
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-535 Air Hose Bushing Tru-Flate 21-143 Air Hose Fitting
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 21-222 Air Hose Fitting
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-242 Air Hose Fitting Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 17-351 Ball Foot Direct Air Line Chuck
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Tru-Flate 21-505 Air Line Coupling Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 12-425 Air Line Plug
Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-603 Air Line Plug Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 12-435 Air Line Plug
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plug 1/4". I/M x 3/8" MNPT. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug Plews/Edelmann 12-611  Air Compressor Hose Fittings
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Plug 3/8". TF x 1/4" FNPT.
Stanley TIRE-14F Tire Chuck Tru-Flate 12-605 Air Line Plug Tru-Flate 21-515 Air Line Coupling
Plated steel; corrosion resistant steel for long life. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT.
Plews/Edelmann 12-267/6  Air Compressor Hose Fittings Stanley 38M-14M Hex Reducer Nipple Plews/Edelmann 12-265  Air Compressor Hose Fittings
Plug 1/4". I/M 3/8" ID slim. Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Plug 1/4". I/M x Barb 1/4" ID.
PLUG 3/8IN TF X 3/8IN FNPT    Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Stanley AP-38F Auto Hose Adapter Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter
Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections.
Tru-Flate 12-705 Air Line Plug Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male 3-IN-ONE 120046 Pneumatic Tool Oil
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Marksman spout for easy precision application. Professional grade formula. Lubricates and protects to extend tool life. Quickly removes gum and sludge. Prevents rust.
Marvel Mystery MM080R Air Tool Oil With Childproof Cap SPLICER HOSE REUSABLE 1/4IN   Blaster 16-ATL Air Tool Lubricant
Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. Lubricates and protects internal tool parts. Formulated for use with in-line oilers. Removes moisture and provides lubrication. Protects tools against high speeds and shock loads. Use on all pneumatic tools and equipment.
HOSE AIR END REUSABLE 1/4IN   Tru-Flate 13-235 Industrial Air Line Coupler Tru-Flate 13-225 Air Line Coupler
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-355 Snap Clip On Air Line Chuck Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter
Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life.
Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler SPLICER HOSE REUSABLE 3/8IN
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Blaster 16-ATC Air Tool Conditioner COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT
Cleans and restores pneumatic tool parts. Breaks loose deposits that create friction. Reaches deep into small recesses to leave a protecting film of lubrication. Can be used as in-line lubricant. Removes moisture. An effective antifreeze. Protects tools from freezing down to -25 degreesF. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 13-135 Air Line Coupler Tru-Flate 13-125 Air Line Coupler
Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley Industrial IHKIT-14F Hose Coupler Kit Stanley HREPAIR-38 Hose Splice Kit Bostitch BTFP72327 Ball Drain Valve
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose ; (1) barb x barb hose splicer for 3/8" hose &  (3) Clamps. Turn ball type drain valve. 1/4" NPT male thread.
SPLICER HOSE REUSABLE 1/2IN   HOSE AIR END REUSABLE 1/2IN   Tru-Flate 13-201 Coupler/Plug Set
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 41-300 Hose Repair Kit Stanley TEE-14F Tee Fitting Plews/Edelmann 13-138 Hose Coupling
Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Coupler 1/4". TF x 3/8" FNPT.
Tru-Flate 13-335 Air Line Coupler HOSE AIR END REUSABLE 3/8IN   Tru-Flate 21-605 Barb Air Line Swivel
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Plews/Edelmann 13-237 Hose Coupling Marvel Mystery MM85R1 Air Tool Oil With Childproof Cap
Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
Tru-Flate 13-101 Coupler/Plug Set Tru-Flate 13-325 Air Line Coupler HOSE AIR END REUSABLE 1/4IN
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-301 Coupler/Plug Set HOSE AIR ED RUSBL W/SWVL 3/8IN
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Mintcraft DZA019 Hose Coupler Set HOSE AIR ED RUSBL W/SWVL 1/2IN Tru-Flate 13-425 Air Line Coupler
3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Tru-Flate 13-435 Air Line Coupler Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Tru-Flate 13-537 Air Line Coupler Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-603 Hose Coupling
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews/Edelmann 13-605 Hose Coupling Tru-Flate 13-401 Coupler/Plug Set Tru-Flate 13-611 Air Line Coupler
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-613 Air Line Coupler HOSE AIR END REUSABLE 3/8IN   Bostitch Prozhoze Reusable Hose Repair Kit
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
Tru-Flate 13-527 Air Coupler Tru-Flate 12-537 Air Hose Plug COUPLER-PLUG SET 4PC
COUPLER-PLUG SET 4PC
Our Price: $14.26
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs.
Tru-Flate 13-713 Air Line Coupler Mintcraft CC910 Air Tool Accessory Kit Mintcraft ATA-052-1 Hose Plug
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector. High speed steel.
Mintcraft ATA-053-A Hose Plug North American 7637 Speedway Air Ratchet Wrenches Speedway 50180 Spray Gun
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8". Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter.
Stanley PREMOIL-4OZ Grade Pneumatic Tool Lubricant Stanley PREMOIL-20OZ Grade Pneumatic Tool Lubricant Ingersoll-Rand EC400-NS  Needle Scaler
Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components. Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components. Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. For use with the Ingersoll Rand 114GQC Air Hammer.
Edge 3107G Pneumatic Die Grinder Ingersoll-Rand 114GQC Air Hammer Stanley WINTEROIL-20OZ Winter Grade Pneumatic Tool Lubricant
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle. Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401. Prevents moisture coming into the tool from freezing.
Ingersoll-Rand 301B Air Angle Die Grinders Mintcraft ATA-050 Air Hose Connector Mintcraft TA-054 Air Hose End
Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life. Brass. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Mintcraft ATA-057 Hose Plug Mintcraft ATA-0561 Air Line Connector Mintcraft ATA-0243L Barb Hose Splicer
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Brass. All brass.
Ingersoll-Rand 317A Hi Speed Sanders Edge 3101G Pneumatic Die Grinder Ingersoll-Rand 170G Air Ratchet Wrenches
For small jobs and hard to reach places. Ideal for light sanding, feather edging and rust removal. 18,000 rpm, 0.45 hp (0.35 kw) motor. Easy to handle, compact and lightweight. Built-in power regulator. Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT.
Edge 311G Dual Action Pneumatic Sander Ingersoll-Rand 210G Gravity Feed Pneumatic Spray Gun Ingersoll-Rand EC300  Air Nibbler
Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8". Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and  (1) 20 1/4 oz plastic paint cup. The Ingersoll Rand Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges.
Edge 300G Random Pneumatic Sander Ingersoll-Rand Edge 236G Air Impact Wrench Ingersoll-Rand EC112  Air Drills
Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords. Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. The Ingersoll Rand Edge 1/2" air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done.
Ingersoll-Rand Edge 7811G Reversible Air Drill Ingersoll-Rand 107XPA Air Ratchet Wrenches Ingersoll-Rand 231G Air Impact Wrench
Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight. Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16". Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI.
Ingersoll-Rand 231C Air Impact Wrench Ingersoll-Rand 1077XPA Air Ratchet Wrenches Mintcraft ATA-055 Quick Coupler
Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control. Variable speed lever style throttle. Advanced head design for extra durability. Up to 54 ft-lbs. torque. Specs: 160 RPM free speed, 3/8" bolt cap, 4 CFM, 19 CFM at load, 94.4/105.4 dBA, 1/4" air inlet. All brass.
Ingersoll-Rand 2100G Composite Air Impact Wrench Ingersoll-Rand EB2125X Air Impact Wrench Mintcraft ATA-056 Quick Coupler
Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs. 690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A. All brass.
Ingersoll-Rand 212 General Duty Air Impact Wrench Ingersoll-Rand Edge Pro 2317G Air Impact Wrench Kit Ingersoll-Rand 2115TIMAX Industrial Duty Air Impact Wrench
Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechanism. Pressure feed lubrication system. Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance.
Ingersoll-Rand 3445MAX Pneumatic Angle Grinder ThunderGun 232TGSL Air Impact Wrench WRENCH IMPACT 1/2IN 930FT/LBS
Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet. As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. Powerful and durable. Provides 1,350 lbs of torque and 930 ft-lbs of max reverse torque powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism. Weighs only 4.6 lbs, providing less weight so you can work harder and faster for longer periods of time.
Ingersoll-Rand 261 Air Impact Wrench Ingersoll-Rand 2145QIMAX Air Impact Wrench Ingersoll-Rand 285B-6 General Duty Air Impact Wrench
Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length. Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger.
   
 
1