Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR COMPRESSOR ACCESSORIES
Sort By:
1
Stanley THREADTAPE Thread Sealant Tape Plews 21-557 Drain Cock Senco PC0101 Air Tool Oil
Properly seals all male threaded connections to prevent air leaks. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Premium-grade oil formulated with high-quality paraffin distillate stocks. Contains carefully balanced rust and oxidation inhibitors. Lubricates Pneumatic tools, protects against corrosion and extends part life.
North American 9402 Speedway Air Inflation Kit Mintcraft FDQ910 Inflation Kit Senco PC0350 Standard Belt Hook
Ideal for inflating toys, rafts, sports equipment and more. Includes 1/4" NPT female connector, 1/4" x 1/8" connector, inflation needle, tapered nozzle and extension tube. Use with any compressor and hose. Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle. Fits pneumatic tools with a 1/4'' fitting. Hook nail gun on your tool belt to reduce damage and free up hands.
Nati 9390 Air Hose 25 ft Stanley 3WAY-RND 3-Way Round Air Line Manifold Plews 4-25E-RET Recoil Air Hose
Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi. Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow
Senco PC0630 Belt Hook Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru-Flate 21-707 Safety Valve
Fits pneumatic tools with 3/8'' fitting. Extra wide width. Hook nail gun to your belt to free up hands to reduce damage. Wide enough to fit over 2x4. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI.
Plews 576-25A Air Hose Plews 4-50E-RET Recoil Air Hose Nati 9411 Air Hose 25 ft
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi.
HOSE AIR POLY BLUE 1/4INX25FT Tru-Flate 24-801 Air Line Pressure Gauge Muti 60605X Nailgun Hanger
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. PSI 0-200  0-14 kg/cm2; mounting back. Spring loaded and retractable. Solid steel with durable zinc plating. Keeps tools close by. For Use With: Hitachi: NR90AE, NR90AF, NR90AD; Stanley Bostitch: N88RH-2.
Plews 554-50A-10 Air Hose Plews 576-50A Air Hose Nati 9389 Air Hose 50 ft
Quality  multi-purpose air hose. Light weight, flexible, kink-resistant design. 300 PSI. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi.
Bostitch BTFP72326 Mini Regulator and Gauge Kit HOSE AIR 1/4INX25FT           Nati 50059 Air Hose 25 ft
HOSE AIR 1/4INX25FT
Our Price: $18.26
Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Extremely lightweight and flexible air hose provides ideal performance in all climates. Solid brass fittings: 1/4" - 18 NPT. Oil and abrasion resistant. Heavy duty braided reinforcement. Working temperature range from 30 to 150 degrees F. Maximum working pressure of 250 psi.
Plews 41-135 Air Line Regulator with Gauge HOSE AIR 3/8INX25FT           HOSE AIR 3/8X50FT
HOSE AIR 3/8INX25FT
Our Price: $19.96
HOSE AIR 3/8X50FT
Our Price: $20.91
Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends. Ultra Air takes hybrid to a new level, offering increased cold weather flexibility over competitive hoses. When uncoiled, this hose lays flat making it easier to use with no interruption in air flow or tripping hazards. Lighter in weight than rubber and more flexible than PVC; features bend restrictors. Stays flexible, -40 to 150 degrees F. 300 PSI.
Plews/Edelmann 41-101 Air Tool Oilers HOSE AIR 1/4INX50FT           Plews 12-50E Poly Air Hose
HOSE AIR 1/4INX50FT
Our Price: $23.43
Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI.
Nati 9412 Air Hose 50 ft Prohoze HOPB1450 Air Hose Stanley N66C-RK Repair Rebuild Kit
Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi. All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild Kit for N66C Model (630.2483).
Stanley 9B12062R Fuel Cell Tru-Flate 24-343 Manual Mini Air Line Filter Plews 576-100A-5 Air Hose
Use this fuel cell with Bostitch, Paslode, and Hitachi Cordless Finish Nailers. Averages 1,100 shots. Contains synthetic lubricants for optimal tool operation. Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends.
Stanley TVA6 Trigger Valve Kit Thermoid 522-25 Coupled Air Hose Thermoid 538-25 Coupled Air Hose
Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes: Bostitch TVA6 trigger assembly ,Valve assembly , Lubricant , Two orifice caps. Spring pin punch, Complete instructions. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
Sta-Lube SL22133 Air Compressor Oil Stanley Industrial Air Compressor Regulator with Gauge HOSE AIR 3/8INX50FT
HOSE AIR 3/8INX50FT
Our Price: $33.46
Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life. Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge
Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge Stanley TVA11 Trigger Valve Stanley F N89ORK O-Ring Kit
Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. Replaces worn or broken trigger valve for Stanley Bostitch Nos.N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes: TVA11, Roll Pin., and Lubricant. Contains all o-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve o-rings.
REGULATR TOOL AT-HAND INLN AIR North American 7637 Speedway Air Ratchet Wrenches Prohoze HOPB14100 Air Hose
Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8". All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life.
Plews 12-100E Air Hose Tru-Flate 41-175 Air Compressor Accessory Kit Stanley ORK13 O-Ring Repair Kit
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced making a tool in otherwise good condition 'like new'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  RN45.
Hitachi 728982 Fuel Cell Stanley RN46-RK Repair Rebuild Kit AIR HOSE PROFLEX 1/4IN X 50FT
Injects gas into nailer. 1,200 nails per fuel rod. Use with NR90GC (877.4366)  and NR90GR (775.0334) Hitatchi nailers. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild kit for No.RN46 (225.1452) . Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings.
Abbott Rubber 1502-38X50MM Air Hose 50 ft Prohoze PRO-1450 Air Hose AIR TANK PORTABLE 5 GALLON
Rubber hose, durable, abrasion resistant. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions. Portable, ready-to-use tank is great for inflating tires and cleaning engines, garage and workshop. Refills from any air service station or air compressor in minutes. Equipped with air shut-off valve, pressure gauge, regulator, 4' x 1/4" air hose and tire chuck 85-125 PSI working pressure. Convenient built-in carry handle.
HOSE AIR 1/4INX100FT          Ingersoll-Rand EC400-NS  Needle Scaler Plews 13-50AE Air Hose
HOSE AIR 1/4INX100FT
Our Price: $46.49
Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. For use with the Ingersoll Rand 114GQC Air Hammer. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI.
Edge 3107G Pneumatic Die Grinder Stanley ORK11 O-Ring Kit Thermoid 522-50 Coupled Air Hose
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  N80, N90 . Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
AIR TANK PORTABLE 10 GALLON   Plews 552-50AK-5 Air Hose Kit Tru-Flate 41-907 Air Tank Conversion Kit
Portable, ready-to-use tank is great for inflating tires and cleaning engines, garage and workshop. Refills from any air service station or air compressor in minutes. Equipped with air shut-off valve, pressure gauge, regulator, 4' x 1/4" air hose and tire chuck 85-125 PSI working pressure. Convenient built-in carry handle. Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in  garage, shop, industry,  or home. Includes: Safety blow gun, coupler and plugs, 5 different tips. Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve.
Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge Thermoid 538-50 Coupled Air Hose AIR HOSE PROFLEX 3/8IN X 50FT
Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure. Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings.
Ingersoll-Rand 114GQC Air Hammer Tru-Flate 24-301 Manual Compact Air Line Filter Ingersoll-Rand 301B Air Angle Die Grinders
Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life.
Tru-Flate 24-311 Manual Air Line Filter Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant HOSE AIR 3/8INX100FT
HOSE AIR 3/8INX100FT
Our Price: $63.00
Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently.
Abbott Rubber 1010-03825-50-4MM Quick Connect Air Hose 50 ft Stanley WINTEROIL-4OZ Winter Grade Pneumatic Tool Lubricant Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge
Rubber hose, durable, abrasion resistant. Prevents moisture coming into the tool from freezing. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz.
AIR HOSE PROFLEX 1/4IN X 100FT Edge 3101G Pneumatic Die Grinder Ingersoll-Rand 170G Air Ratchet Wrenches
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT.
Prohoze PRO-14100 Air Hose Abbott Rubber 1025-0750R-50-CRS 2-Lug Air Hose 50 ft Edge 311G Dual Action Pneumatic Sander
Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions. Rubber hose, durable, abrasion resistant. Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8".
Plews 13-100AE Air Hose Plews 510HR-RET Retractable Air Hose North American Tool 52710 Speedway Air Compr
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. All steel construction for industrial applications. Spring powered auto rewind. Ideal for mounting of wall, floor or ceiling. Guide arm adjustable for different angles. Valve assembly handles up to 250 PSI and 25 cfm. Locking ratchet brake. 1 gallon pancake oil free air compressor with inflation kit. Max psi 100.
Ingersoll-Rand EC300  Air Nibbler Edge 300G Random Pneumatic Sander Ingersoll-Rand Edge 236G Air Impact Wrench
The Ingersoll Rand Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges. Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords. Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long.
Ingersoll-Rand EC112  Air Drills Ingersoll-Rand Edge 7811G Reversible Air Drill Ingersoll-Rand 107XPA Air Ratchet Wrenches
The Ingersoll Rand Edge 1/2" air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done. Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight. Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16".
North American 7517 Speedway Air Compressors Pulsar PCE6020K  Air Compressors Senco PC1010 Air Compressor
2 gallon oil free air compressor. 1.1 cfm's at 40 psi. Lightweight/portable. Quiet operation, 75dB. Air regulator and quick coupler included. Max psi 100. Oil-less, 2 gallon tank with 6 piece accessories. 100 psi maximum pressure. 1.5 CFM/40 psi; 120V/60HZ/3 HP. Ultra quiet and ultra light lube-less pump compressor. Ideal for a range of finish and trim projects, as well as for home improvement jobs, hobbies and crafts. Lightweight, portable and easy to maintain. The heavy-duty induction motor is efficient for long life operation. The oil-free pump design and maintenance free. Weighs only 20 lbs.
Porter-Cable C2002 Air Compressor Ingersoll-Rand 231G Air Impact Wrench Ingersoll-Rand 231C Air Impact Wrench
Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulated, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes: Compressor and operating manual.. Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI. Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control.
Ingersoll-Rand 1077XPA Air Ratchet Wrenches Ingersoll-Rand 2100G Composite Air Impact Wrench Senco PC1010N  Air Compressors
Variable speed lever style throttle. Advanced head design for extra durability. Up to 54 ft-lbs. torque. Specs: 160 RPM free speed, 3/8" bolt cap, 4 CFM, 19 CFM at load, 94.4/105.4 dBA, 1/4" air inlet. Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs. Designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra quiet operation makes the compressor the ideal finish and trim unit. Long life induction motor and oil free pump design eliminate the need for oil or regular maintenance. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Rugged roll cage protects critical components. 68 dB A for ultra quiet operation. 4 amps at 115 volts. SCFM at 90 PSI 0.7. Maximum pressure 135 psi. Ultra lightweight at only 21 lbs.
COMPRESSOR .75HP 125PSI HOTDOG Stanley-Bostitch BTFP02011 Air Compressors Ingersoll-Rand EB2125X Air Impact Wrench
1.0 CFM at 90 psi. 125 max psi. 0.75 (Peak) horsepower. 44 dB @25 ft. 1 gallon air tank capacity. Dimensions: 14.1"L x 13.77"W x 12.6"H. Weighs 24.7 lbs. 6 gallon oil free Pancake compressor delivers up to 2.6 SCFM at 90 psi. Only 14" in diameter and 33 lbs. for easy portability. It's light enough to carry and get in and out of the jobsite. Long life, maintenance free pump for convenient on going uses. At just 80 dBA, this compressor offers the user a quiet work environment. Integrated control panel helps vital compressor components to be protected against tough jobsite conditions. Includes 2 Universal couplers to easily support 2 users. Ideal for trim and finish applications including installing molding, cabinetry or window/door casings. 690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A.
COMPRESSOR QUITE 135PSI 1 GAL Plews 545HR-RET Reel Air Hose Ingersoll-Rand 212 General Duty Air Impact Wrench
.75 SCFM delivered at 90 PSI, 1.0 gallon tank and 135 max PSI enables more nails to be fired and provides quicker recovery. Durable oil free pump provides extended maintenance-free operation. Low 2.6 amp draw motor provides easy start-up and reduces breaker tripping. Belt drive. Low 71 dBA allows for quieter operation. Roll cage and control panel provide protection to key compressor components. Lightweight at only 24 lbs, thin (9.0") and compact design is easy to carry and store. Ball valve drain allows for quick and thorough tank draining. One quick coupler to easily support 1 nailer. Convenient cord wrap for easy storage. High-flow regulator for increased performance. Features all-steel construction and a spring tension brake to prevent accidental unwinding. Mounts in either direction. Polyurethane with dual output fittings. 200 PSI working pressure. Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechanism. Pressure feed lubrication system.
North American Tool 52024 Speedway Air Compr 6GAL PANCAKE COMPRESS 150PSI  Stanley-Bostitch BTFP01012 Air Compressors
2 gallon twin stack, oil free oil compressor with 1/4" x 25' auto rewind hose reel. Construction grade hose. Hose reel provides convenience and on-board storage all in one package. Low profile design for stability and safety. Push connect coupler. Quiet operation, only 75 dB. 1 cfm at 40 psi and .05 cfm at 90 psi. Oil-free pump design for reliability and no maintenance. Low amp motor starts easily in cold weather or with extension cord. Upgraded shroud, handle and console cover protect vital components, makes unit easier to carry and includes cord wrap. Two regulated, factory installed air couplers to easily support two users. Water drain valve and rubber feet. Specs: 120 volt, 150 PSI, 3.7 SCFM at 40 PSI and 2.6 SCFM at 90 PSI for fast recovery time. 34 lbs. tool weight. Includes 13 Piece accessory kit - 25' x 1/4" PVC air hose wtih coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA saftety nozzle, rubber tip and three inflator adaptors. 2.5 gallon suitcase style compressor. 2.0 SCFM delivered at 90 psi, 150 max psi enables many nails to be fired with quick recovery. Durable oil free pump provides extended maintenance free operation. Low 82 dba allows for quiet operation. Roll cage and control panel provide protection to key compressor components. Bostitch high efficiency/low amp motor for easy start up in cold weather or extension cord application (12 ga 50' (15.2 m) or less). Lightweight (32 lbs), thin (12") and compact design is easy to carry and store. Can be run in either vertical (higher pick-up) or horizontal position (low CG). Ball valve drain allows for quick and thorough tank draining. Two quick couplers to easily support 2 nailers. Bostitch high flow regulator and couplers to maximize nailer performance.
Pulsar PCE6060K Air Compressors Senco PC1280  Air Compressors Ingersoll-Rand Edge Pro 2317G Air Impact Wrench Kit
120V/60HZ/3.5 Peak HP; 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max. pressure 115 psi. 15 piece accessories included. Designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil free pump allows for maintenance free operation and no oil leaks. Draws only 12 amps; will not trip circuit breakers. Integrated control panel for easy access to couplers and pressure control knob; highly visible gauges. Pancake tank design keeps compressor compact and well balanced. Weighs only 38 lbs. Dual couplers allows you to run 2 hoses simultaneously. 150 max psi. Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case.
Senco PC0968 Air Compressor Pulsar PCE6050T Air Compressors COMPRESOR PANCAKE 165 PSI 6GAL
Cold weather start up valve. Designed with the power and speed to handle all finish & trim applications; comes with an oil less pump which ensures no messy oil leaks. Specs: Height: 13.5" Length: 16"; Weight: 38 lb; Recovery Time: 95 ? 135 psi 17 seconds; Pump Up Time: 0 ? 135 psi 82 seconds; Horsepower: (1.0 HP running); Powersource: Electric; Max Pressure: 135 psi; Tank Storage: 2.5 gal.; Max Amp at 115V: 8 amps. Twin-tank, oil-lubricated 5 gallon unit. Powerful 3.5 HP electric motor, flutter-valve pump puts out 115 max psi and cfm's of 5.2 at 40 psi and 4.2 at 90 psi. Functional enough for use as an inflator, yet vibrant enough for use with the majority of air tools. Compact and portable with easy to read pressure gauges. 165 max psi tank (22.7L) and 2.6 scfm delivered at 90 psi pump, enable long tool run time with quick recovery. High efficiency motor for easy start up in cold weather or extension cord application. (14 gauge or larger, 50 ft (15.2m) or less). 75.5 dBA noise level for a quiet work environment. High flow regulator and couplers to maximize air tool performance. Long life oil free pump for maintenance free operation. Console cover protects controls and is removable to allow easy repair. Outlet tube re-routed to avoid being catch point. 30 lb weight makes unit easy to carry/store. 2 universal couplers to easily support two users. Ball drain valve for quick and thorough tank draining. Convenient cord wrap for easy storage. Protective rubber leg covers to prevent marring. High flow regulator for increased performance. 120 v, 60 Hz, 10 amps, universal motor.
Senco PC1131 Air Compressor Ingersoll-Rand 2115TIMAX Industrial Duty Air Impact Wrench Hitachi EC12 Portable Air Compressor
Generates 4.4 SCFM which provides enough power for all types of applications, from finish to framing. The oil splash design and induction motor provides the durability expected for professional contractors. Direct drive motor, Cast iron sleeve/cast iron head cylinder, oil-splash lubrication. Specs: 2.0 HP Running, 4.4 SCFM at 90 PSI, 125 max PSI, 4.3 gallon tank. 14.5"H x 20.5"L. 60 lbs. tool weight. Includes: 1/4" coupler. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance. Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers (4.0cfm at 90psi). Direct drive electric motor provides durability and long life. All metal inner construction and fan. Line regulator with gauge; oil lubricated pump and O-ring on drain cock makes valve easy to open and close. Specs: Power Output: 2hp; Amps: 14.5; Rpm: 3,450; Air Displacement: 4.0cfm at 90psi; Start/Stop Control: 100/125psi; Tank Capacity: 4.0 gal. Weight: 60lbs; Lubrication: Oil; Recovery Time: 14-sec. Includes: Synthetic Oil (8oz) & Oil Dipstick.
Pulsar PCE6150 Air Compressors HOSE AIR BULK 1/4INX250FT     COMPRESSOR 1.5HP 125PSI STACK
HOSE AIR BULK 1/4INX250FT
Our Price: $234.70
120V/60HZ/3.5 Peak HP. 5.2 CFM/40 psi; 4.2 CFM/90 psi. Max pressure 115 psi. 2.5 CFM at 90 psi. 1.5 (Peak) horsepower. 125 psi max. 47 dB @25 ft. 4 gallon air tank capacity. Dimensions: 16.93"L x 16.54"W x 16.54"H. Weighs 68.5 lbs.
North American Tool 52956 Speedway Air Compressors COMPRESSOR HANDCARRY 100PSI 4G Ingersoll-Rand 3445MAX Pneumatic Angle Grinder
10 gallon solid cast iron, oil lube air compressor. Duarble steel air intake filter. High efficiency cold start induction motor. Has oversized wheels. 6 cfm at 40 psi and 5 cfm at 90 psi. Max psi 125. 3.2 CFM delivered at 100 psi pump enables quick recovery. Oil lubricated pump improves durability. Cast iron cylinder enhances pump life. Lightweight  at only 53.32 lbs. design for easy use and handling in a variety of orientations. High-flow regulator for increased performance. Dual soft start valves assist in cold weather start-up. 4 gallon twin stack tank design. Direct drive. 120v Ac 14 amps, 60 Hz, 2 pole induction motor. Pump speed 3,400 rpm. Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet.
ThunderGun 232TGSL Air Impact Wrench COMPRESSOR HD 200 PSI 2-1/2GAL North American Tool 7678 Speedway Air Compressors
As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. 3.0 scfm delivered at 90 psi pump. 2.5 gallon tank and 200 max psi enables a large amount of nails to be fired and provides quick recovery. Durable oil free pump provides extended maintenance-free operation. Low 71.5" dBA allows for quieter operation (tested per ISO3744). Low 12 amp draw motor provides easy start-up and reduces breaker tripping. Lightweight (36 lbs.), thin (12.5") and compact design is easy to carry and store. Compressor can be operated/stored in either the vertical or horizontal position. Roll cage and control panel provide protection to key compressor components. Dual quick couplers to easily support 2 nailers. Ball valve drain allows for quick and thorough tank draining. Convenient cord wrap for easy storage. High-flow regulator for increased performance. Drive belt. 120 volt, 60 Hz, 8 amps, universal motor. 2,300 rpm pump speed. 15 gallon vertical, solid cast iron, oil lube air compressor. high efficiency motor with thermal overload protection. 6 cfm's at 40 psi and 5 cfm's at 90 psi. Reduced vibrations with rubber foot stabilizers. Reduced noise level of 93-95 dB. Dual "push connect" manifold. Max psi 125.
Stanley CAP2040ST-OL Air Compressor COMPRESSOR CRDLS 60V 2.5GAL   WRENCH IMPACT 1/2IN 930FT/LBS
Compact design was engineered to be more maneuverable and convenient to carry. It offers enough air flow to operate two framing nailers or three roofing nailers simultaneously. Four oversized rubber feet to help minimize vibration. Durable ball type drain valve. Roll bar handle protects the oil site glass and other gauges against damage if the unit accidentally tips or rolls over. Upgraded industrial-grade pressure switch/regulator makes for easy adjustments and increased durability. Oil-lubricated pump offers a cast iron cylinder for durable performance over extended periods of use.  Specs: 3 horsepower (peak) induction motor, this unit draws only 13.8 amps (120 volts) to prevent circuit breakers from flipping as the motor cuts in and out. Four-gallon stack tank compressor providing 4 CFM at 90 psi and a maximum operating pressure of 135 psi. The FlexVolt 60 volt max 2.5 gallon cordless air compressor offers all of the convenience and portability of cordless with the power of a corded tool. Each battery charge allows for up to 1,220 nails, providing the run-time to complete a variety of applications. OneTurn regulator for fast, accurate pressure adjustments. Heavy duty roll cage for jobsite applications. Brushless motor paired with a heavy duty oil-free pump. 135 max psi tank storage. Lightweight and portable at only 21.5 lbs. and a height of 15.5". Made in the USA. Powerful and durable. Provides 1,350 lbs of torque and 930 ft-lbs of max reverse torque powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism. Weighs only 4.6 lbs, providing less weight so you can work harder and faster for longer periods of time.
Ingersoll-Rand P1IU-A9 Air Compressor HOSE AIR BULK 3/8INX250FT     Pulsar PCE6280 Air Compressors
HOSE AIR BULK 3/8INX250FT
Our Price: $323.72
Single stage compressor for professionals and serious do-it-yourselfers it is ideal for the home, shop or jobsite. Specs: HP: 2; CFM at 90 PSI:4.30; Max. PSIG: 135; Dimensions LxHxW: 19x19x19; Net Weight: 77lbs; Start Up Kit: No. 120 V/60HZ/5 Peak Hp. 6.4 CFM/40 psi; 5.6 CFM/90 psi. Max pressure 125.
COMPRESSOR 2HP 125PSI S-STACK COMPRESSOR WHEEL 200PSI 4-1/2G COMPRESSOR AIR 15GAL 115PSI
5.0 CFM at 90 psi. 125 max psi. 2.0 (Peak) horsepower. 49 dB @25 ft. 5 gallon air tank capacity. Dimensions: 28.35"L x 20.08"W x 20.08"H. Weighs 86.3 lbs. 200 PSI max tank storage pressure provides a user with 80 percent more usable air. 5.0 SCFM at 90 PSI allows the compressor to recover quickly after its initial tank charge is exhausted. Vertical stand feature and collapsible handle allows a user to save space by transporting or storing the compressor in a vertical position. 78 dBA operation noise level for a quieter work environment. 10" non-flat foam tires allow for easy transportation around the jobsite. EHP efficient high pressure technology allows for longer pump and motor life. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor. High flow coupler allows for maximum nailer performance. Metal console panel provides a display area as well as protects the gauges, couplers and regulator. High flow coupler allows for maximum nailer performance. 2" gauges allow for an easy to read surface. Weighs 83 lbs. 5.2 CFM at 40 PSI or 4.2 CFM at 90 PSI. Max pressure: 115 PSI. Oil lubricated. Features easy to read dual pressure gauges, wheel kit and quick connect coupler. Accessories Kit includes: 1/2" impact wrench, tire inflator with gauge, spray gun, 2" brand nailer/stapler and 25' hose.
COMPRESSOR WORKSHOP 200PSI 15G HOSE AIR BULK 1/2INX250FT     Ingersoll-Rand 261 Air Impact Wrench
HOSE AIR BULK 1/2INX250FT
Our Price: $461.30
5.0 SCFM at 90 psi allows for quick compressor recovery times. 200 psi max tank storage pressure allows for longer air tool run times. 78 dBA (tested per ISO3744) operational noise level for a quieter work environment. EHP efficient high pressure technology delivers exceptional air-tool run times. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft or less) due to consistent amp draw requirements of the compressor. Compact design allows for the compressor to be easily moved, transported and stored. Robust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap. Metal console panel protects the gauge, coupler and regulator. High flow air regulator and high flow coupler allows for maximum air tool run time. 2 inch gauges allow for an easy to read surface. Wide track, semi-pneumatic tires allow for additional stability, easy movement and no tire maintenance. 1,750 rpm pump speed. 120 volts power supply. Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length.
Ingersoll-Rand 2145QIMAX Air Impact Wrench Ingersoll-Rand P1.5IU-A9 Air Compressor Ingersoll-Rand 285B-6 General Duty Air Impact Wrench
Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. Single stage compressor for professionals and serious do-it-yourselfers, the versatile 'Garage Mate ' is ideal for the home, shop or jobsite. Equipped with a pressure switch, pressure gauge, regulator, safety valve, manual drain and six-foot power cord. Features a cast-iron, oil-lubricated pump for solid, reliable performance. Specs: CFM at 90 PSI: 5.2; Max. PSI: 135; HP: 2; Dimensions LxHxW: 22 x 23 x 43; Net Weight: 200lbs;  Voltage/Engine: 115 - 1 - 60 Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger.
North American Tool 7295 Speedway Air Compressors IronHorse IHD6160V1 Air Compressor Hitachi EC2510E Air Compressor
OHV high performance ENERGIN gas engine wheelbarrow air compressor. 9 gallon twin tanks with solid cast iron "V" design pump for maximum performance. Run flat tire and dual "push connect" manifold. 9.1 cfm at 90 psi. Thermally protected  electric motor with 60 gallon ASME registered tank, easy view oil sight gauge, cast iron compressor  minimizes vibration. Individual and removable cylinders, no magnetic motor starter required, pressure switch has on/off control. High efficiency reed valves for maximum performance, efficient heat removal from pulley-fan, sturdy belt guard. Specs: CFM/PSI is 11.2 CFM at 90 PSI, max rated PSI is 150, 208/230V electric motor, dimensions are: 27"Lx20"Wx65"H, weighs 260 lbs. Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover. Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply. Specs: Power Output: 5.5 Net HP at 3,600 RPM ( Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables), Honda engine. Displacement: 196 cc; Tank Capacity: 8 Gallon; Motor RPM: 3,200; CFM: 9.0 at 100 psi; Weight: 144 lbs. Includes: Synthetic Oil; Oil Dipstick; Wheel; Pressure Gauge; Drive Belt; Filter.
Ingersoll-Rand SS3J5.5GH-WB Air Compressor Woods/Iron Horse IHD7180V1 Iron Horse Air Compressors North American 51866 Speedway Air Compressors
Lightweight and durable with a low-profile design providing maximum maneuverability on the job site. Cast-iron, oil-lube compressors are designed for the toughest continuous duty applications. Specs:  5.5 HP, Honda engine, 11.8 CFM at 90 PSI, 135 PSI, 1/4" NPT, 8-gallon twin tank. Includes: Pressure switch, regulator and gauge, two quick disconnects to power multiple tools and twin 8-gallon capacity tanks. Features a 3 piston "V" style cast iron pump for longer life. Produces 16.5 CFM at 90 pis with a max pressure of (150 psi). No magnetic starter required. Oil sight glass. Enclosed belt guard. Heavy duty pressure switch. ASME certified tank that meeds the national pressure vessel certifications. Features a commercial grade quality motor with a built in starter. Low rpm (1050) and quiet operation. 5 horse power 230 volt, twin cylinder 2 stage cast iron pumps operates at 10.8 CFM at 150 psi, 12 CFM at 90 psi and 13.1 CFM at 40 psi, with a maximum psi of 150. Oil lubricated, belt driven.
   
 
1