Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR COMPRESSOR HOSE FITTINGS
Choose a sub category:
AIR COMPRESSORS AIR TOOLS AIR TOOL ACCESSORIES
AIR COMPRESSOR HOSES AIR COMPRESSOR HOSE FITTINGS BLOW GUNS
AIR COMPRESSOR ACCESSORIES SPRAY GUNS AIR TANKS
Sort By:
1
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 12-135 Air Line Nipple Tru-Flate 12-335 Air Line Plug
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-535 Air Hose Bushing Tru-Flate 21-143 Air Hose Fitting
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Stanley THREADTAPE Thread Sealant Tape
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. Properly seals all male threaded connections to prevent air leaks.
Tru-Flate 21-222 Air Hose Fitting Tru-Flate 21-242 Air Hose Fitting Tru-Flate 21-423 Barb Hose Splicer
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 21-505 Air Line Coupling Tru-Flate 21-467 Barb Hose Splicer
Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules.
Tru-Flate 12-425 Air Line Plug Tru-Flate 12-603 Air Line Plug Plews/Edelmann 12-227/6  Air Compressor Hose Fittings
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plug 1/4". I/M x 3/8" MNPT.
Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Plews/Edelmann 12-611  Air Compressor Hose Fittings Stanley TIRE-14F Tire Chuck Tru-Flate 12-605 Air Line Plug
Plug 3/8". TF x 1/4" FNPT. Plated steel; corrosion resistant steel for long life. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Plews 21-557 Drain Cock Plews/Edelmann 12-267/6  Air Compressor Hose Fittings
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Plug 1/4". I/M 3/8" ID slim.
Stanley 38M-14M Hex Reducer Nipple Plews/Edelmann 12-265  Air Compressor Hose Fittings PLUG 3/8IN TF X 3/8IN FNPT
Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Plug 1/4". I/M x Barb 1/4" ID. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Senco PC0101 Air Tool Oil
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Premium-grade oil formulated with high-quality paraffin distillate stocks. Contains carefully balanced rust and oxidation inhibitors. Lubricates Pneumatic tools, protects against corrosion and extends part life.
Stanley AP-38F Auto Hose Adapter Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter
Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections.
Tru-Flate 12-705 Air Line Plug Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male North American 9402 Speedway Air Inflation Kit
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Ideal for inflating toys, rafts, sports equipment and more. Includes 1/4" NPT female connector, 1/4" x 1/8" connector, inflation needle, tapered nozzle and extension tube. Use with any compressor and hose.
Mintcraft FDQ910 Inflation Kit Tru-Flate 13-235 Industrial Air Line Coupler Tru-Flate 13-225 Air Line Coupler
Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-355 Snap Clip On Air Line Chuck Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter
Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life.
Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler COUPLER UNIVERSAL 1/4IN MPT
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
COUPLER UNIVERSAL 1/4IN FPT   Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 13-135 Air Line Coupler
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-125 Air Line Coupler Stanley Industrial IHKIT-14F Hose Coupler Kit Stanley HREPAIR-38 Hose Splice Kit
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose ; (1) barb x barb hose splicer for 3/8" hose &  (3) Clamps.
Bostitch BTFP72327 Ball Drain Valve Senco PC0350 Standard Belt Hook Tru-Flate 13-201 Coupler/Plug Set
Turn ball type drain valve. 1/4" NPT male thread. Fits pneumatic tools with a 1/4'' fitting. Hook nail gun on your tool belt to reduce damage and free up hands. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 41-300 Hose Repair Kit Stanley TEE-14F Tee Fitting Plews/Edelmann 13-138 Hose Coupling
Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Coupler 1/4". TF x 3/8" FNPT.
Tru-Flate 13-335 Air Line Coupler Tru-Flate 21-605 Barb Air Line Swivel Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure. Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Stanley 3WAY-RND 3-Way Round Air Line Manifold Plews/Edelmann 13-237 Hose Coupling Tru-Flate 13-101 Coupler/Plug Set
Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 13-325 Air Line Coupler Senco PC0630 Belt Hook Bostitch Prozhoze Reusable Hose Repair Kit
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Fits pneumatic tools with 3/8'' fitting. Extra wide width. Hook nail gun to your belt to free up hands to reduce damage. Wide enough to fit over 2x4. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
Tru-Flate 13-301 Coupler/Plug Set Mintcraft DZA019 Hose Coupler Set Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory.
Tru-Flate 13-425 Air Line Coupler Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Tru-Flate 13-435 Air Line Coupler
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter
Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Stanley UC38-14M Push-to-Connect Auto Hose Adapter Tru-Flate 13-537 Air Line Coupler Tru-Flate 13-203 Coupler/Plug Kit
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235).
Plews/Edelmann 13-603 Hose Coupling Plews/Edelmann 13-605 Hose Coupling Tru-Flate 21-707 Safety Valve
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI.
Tru-Flate 13-401 Coupler/Plug Set Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-613 Air Line Coupler
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-527 Air Coupler Tru-Flate 12-537 Air Hose Plug
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
COUPLER-PLUG SET 4PC          Tru-Flate 24-801 Air Line Pressure Gauge Tru-Flate 13-713 Air Line Coupler
COUPLER-PLUG SET 4PC
Our Price: $14.26
Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. PSI 0-200  0-14 kg/cm2; mounting back. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Muti 60605X Nailgun Hanger Bostitch BTFP72326 Mini Regulator and Gauge Kit Plews 41-135 Air Line Regulator with Gauge
Spring loaded and retractable. Solid steel with durable zinc plating. Keeps tools close by. For Use With: Hitachi: NR90AE, NR90AF, NR90AD; Stanley Bostitch: N88RH-2. Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends.
Plews/Edelmann 41-101 Air Tool Oilers Stanley N66C-RK Repair Rebuild Kit Stanley 9B12062R Fuel Cell
Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild Kit for N66C Model (630.2483). Use this fuel cell with Bostitch, Paslode, and Hitachi Cordless Finish Nailers. Averages 1,100 shots. Contains synthetic lubricants for optimal tool operation.
Tru-Flate 24-343 Manual Mini Air Line Filter Stanley TVA6 Trigger Valve Kit Mintcraft ATA-052-1 Hose Plug
Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height. Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes: Bostitch TVA6 trigger assembly ,Valve assembly , Lubricant , Two orifice caps. Spring pin punch, Complete instructions. High speed steel.
Mintcraft ATA-053-A Hose Plug Sta-Lube SL22133 Air Compressor Oil Stanley Industrial Air Compressor Regulator with Gauge
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life. Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge
Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge Stanley TVA11 Trigger Valve Stanley F N89ORK O-Ring Kit
Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. Replaces worn or broken trigger valve for Stanley Bostitch Nos.N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes: TVA11, Roll Pin., and Lubricant. Contains all o-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve o-rings.
REGULATR TOOL AT-HAND INLN AIR North American 7637 Speedway Air Ratchet Wrenches Speedway 50180 Spray Gun
Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI. 45 ft-lbs torque range. 4 cfm's at 90 psi. Minimum hose diameter is 3/8". Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter.
Tru-Flate 41-175 Air Compressor Accessory Kit Stanley ORK13 O-Ring Repair Kit Hitachi 728982 Fuel Cell
Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced making a tool in otherwise good condition 'like new'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  RN45. Injects gas into nailer. 1,200 nails per fuel rod. Use with NR90GC (877.4366)  and NR90GR (775.0334) Hitatchi nailers.
Senco PC1195 Mini Hand Nailer Stanley RN46-RK Repair Rebuild Kit Ingersoll-Rand EC400-NS  Needle Scaler
Powerful enough to drive bulk nails into joist hangers, hurricane straps, fencing or decking. Fifty percent lighter than traditional palm nailers and is ideal for exceptionally tight spots. Specifications; Reg. Operating Pressure: 60-110 psi (4.-7.6 bar). Air Consumption: 2 - 4 scfm. Length: 2 3/4" (69.9 mm); Width: 2" (55.6 mm). Fastener Specifications: Drives 2" - 3-1/2", 6d to 16d Bulk Nails. Includes Wrench. Tool Oil Required. Aluminum Housing & Rear Exhaust. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit. Rebuild kit for No.RN46 (225.1452) . Change your air hammer into a needle scaler with a twist of the arm. It gives you the versatility you need to fly through real work. For use with the Ingersoll Rand 114GQC Air Hammer.
Edge 3107G Pneumatic Die Grinder Stanley ORK11 O-Ring Kit Stanley PN50 Mini Impact Nailer
Die grinder features a composite housing for durability and powerful 1/4 HP motor. Specs: RPM: 27,000, Air Inlet Size : 1/4", Min. Hose Size:  3/8", Collet Size (in.): 1/4, Side Handle: No: Durable composite housing Ball bearing construction 1/4 HP motor Self-locking throttle. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Special lubricant is provided with every o-ring kit. Contains all o-rings necessary to rebuild the:  N80, N90 . Rubber grip designed to insulate and reduce vibration; 360 degree swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm. Fastener Specifications: Drives Most Common Bulk Finish, Framing & Timber Nails.
Tru-Flate 41-907 Air Tank Conversion Kit Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge Ingersoll-Rand 114GQC Air Hammer
Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting  metals, chipping and scraping surfaces. Specs:  Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes  chisel shank size .401.
Tru-Flate 24-301 Manual Compact Air Line Filter Ingersoll-Rand 301B Air Angle Die Grinders Tru-Flate 24-311 Manual Air Line Filter
Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Lightweight, durable and maneuverable. Comfortable composite grip is ideal for a variety of applications including porting, weld breaking, de-burring, polishing and grinding. Powerful motor delivers 0.33 hp (0.25 kw) and 25,000 rpm free speed. Integral safety lock throttle lever prevents accidental start-up. Tool comes with 1/4" and 6 mm collets and 2 wrenches. Rear exhaust directs air away from the operator.  Built in lubricating wick increases angle gear life. Composite housing protects tool from cold air and offers greater operator comfort. Durable ball bearing construction improves balance, reduces vibration and ensures longer life. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces.
Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant Mintcraft ATA-050 Air Hose Connector Mintcraft TA-054 Air Hose End
Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently. Brass. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Mintcraft ATA-057 Hose Plug Stanley WINTEROIL-4OZ Winter Grade Pneumatic Tool Lubricant Mintcraft ATA-0561 Air Line Connector
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Prevents moisture coming into the tool from freezing. Brass.
Mintcraft ATA-0243L Barb Hose Splicer Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge Ingersoll-Rand 317A Hi Speed Sanders
All brass. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz. For small jobs and hard to reach places. Ideal for light sanding, feather edging and rust removal. 18,000 rpm, 0.45 hp (0.35 kw) motor. Easy to handle, compact and lightweight. Built-in power regulator.
Edge 3101G Pneumatic Die Grinder Ingersoll-Rand 170G Air Ratchet Wrenches Edge 311G Dual Action Pneumatic Sander
Can be used in various applications including porting, weld breaking, deburring, polishing and grinding. Self-locking lever throttle. Grease fitting for increased angle gear life. Ergonomic grip. 20,000 rpm. Rear exhaust. 1/4" collet output. 1.8 m/s2 vibration. 3 CFM average air consumption. 18 CFM air consumption at load. 1/4" air inlet size. Variable speed throttle. Heat treated head for durability. Comfortable ergonomic grip. Ideal for general engine repair, home projects and light industrial applications. Specs:3/8" chuck size, 170 RPM, 55 ft. lbs. max torque, 4 CFM at PSI, 90 max pressure, 3/8" max bolt capacity, 1/4" inlet NPT. Variable speed sander with built-in power regulator, handle control, and 6" pad. Used for body shop and metal or wood preparation. Specs: CFM 4, CFM at Load 17, speed (RPM) 10,000, air inlet size (NPT) 1/4", and min. hose size 3/8".
Ingersoll-Rand 210G Gravity Feed Pneumatic Spray Gun Senco PC0781 Hand Nailer Stanley BT200-RK Repair Rebuild Kit
Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and  (1) 20 1/4 oz plastic paint cup. Fits in the palm of the hand, making it ideal for joust hangers, metal straps and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar). Height: 5.8"; Weight: 2.4 lb. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes Leather grip. All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down-time'. Simple instructions show how o-rings, seals and bumpers can be replaced. Special lubricant is provided with every o-ring kit.  Rebuild kit for BT200 model.
Ingersoll-Rand EC300  Air Nibbler Edge 300G Random Pneumatic Sander Stanley PN100K Air Impact Nailer Kit
The Ingersoll Rand Edge 2.0 nibbler offers the ability to cut up to 18 gauge steel, aluminum, plastic or other metals in 6' per minute. Ergonomic grip. Angle head for easy cutting. Low profile throttle lever. 1/4" radius with ideal accuracy gives you the control and cutting power you need without the distorted edges. Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords. Ideal for framing or remodeling; drives common bulk nails in confined areas and nails metal connectors or joist hangars. Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement. Hardened steel nose . Specs: 70 to 100 PSI;  1/4" NPT; Height: 5-1/4"; Length: 4-1/8" ; Width: -1/2";  Weight: 2.9 lbs. Includes: Impact Nailer with Standard Nose; Finish Nail Nose; Large Bore Nose; Leather Comfort Glove; Nose Wrench; Hex Wrench; Tool Lubricant and Spare O-Rings.
Ingersoll-Rand Edge 236G Air Impact Wrench Ingersoll-Rand EC112  Air Drills Ingersoll-Rand Edge 7811G Reversible Air Drill
Variable reversible speed with aluminum housing, a working torque of 25-200 (ft.-lb.) and a max. torque of 450 (ft.-lbs.), ergonomic grip and handle exhaust. Specs: drive is 1/2" (square), no load speed is 8,000 RPM, average air consumption (CFM) is 4.3, CFM at Load 24, inlet size is 1/4", min. hose size is 3/8", noise level is 90.3 db, weighs (lbs.) 5.3 lbs and is 7 1/8" long. The Ingersoll Rand Edge 1/2" air drill features a powerful and quiet design with speeds from 500 rpm and 0.5 HP. Keyless 1/2" chuck for extended life and easy bit change out. Side ergonomic grip handle and ergonomic grip make this tool more comfortable and precise when getting work done. Contoured grip and trigger. Keyless chuck for quick bit replacement. Handle exhaust directs air away from work area. Specs: 5 HP, 3/8" chuck, 1700 rpm, 4 CFM, 29 CFM at air consumption at load, 1/4" inlet, 3/8" minimum hose size. 7.4" overall length. 2.7 lbs. tool weight.
Ingersoll-Rand 107XPA Air Ratchet Wrenches Ingersoll-Rand 231G Air Impact Wrench Ingersoll-Rand 231C Air Impact Wrench
Features variable speed reverse lever-style throttle, with 160 RPM, 54 ft-lb (73 Nm) of maximum torque, and a 360 degree adjustable exhaust that directs air away from the operator and the work. Specs: average air consumption (CFM) is 4, CFM at load 19, inlet size is 1/4", and min. hose size is 5/16". Twin Hammer impact mechanism and forward/reverse power regulator. Comfortable vibration-absorbing grip. Specs: 6-vane motor, 1/2", 8,000 RPM, 500 ft/lbs.max torque, 5 CFM at 90 PSI. Continuously refined. Offers the sheer power  and performance features to tackle the toughest jobs with ease. Durable and economical. Adjustable power regulator. Pressure feed lubrication. Easy to service two piece construction. 600 ft./lbs of torque and provides 8,000 rpm (1,2000bpm) to deliver fast, efficient performance. Contoured handle for comfort and control.
Ingersoll-Rand 1077XPA Air Ratchet Wrenches Mintcraft ATA-055 Quick Coupler Ingersoll-Rand 2100G Composite Air Impact Wrench
Variable speed lever style throttle. Advanced head design for extra durability. Up to 54 ft-lbs. torque. Specs: 160 RPM free speed, 3/8" bolt cap, 4 CFM, 19 CFM at load, 94.4/105.4 dBA, 1/4" air inlet. All brass. Powerful, 550 ft-lbs of max reverse torque. 6-vane motor with forward power regulator, composite housing, handle exhuast, 360 degree swivel inlet, and twin hammer impact mechanism. Specs: no load speed is 9,500 RPM, average air consumption (CFM) is 5, CFM at load 25, 1,200 IPM, inlet size is 1/4", min. hose size is 3/8", noise level is 96.6 db and weighs 4.3 lbs.
Ingersoll-Rand EB2125X Air Impact Wrench Mintcraft ATA-056 Quick Coupler Ingersoll-Rand 212 General Duty Air Impact Wrench
690 ft.-lbs. of reverse torque means you'll have the power to burst through those stubborn bolts. Comfortable and easy to use. One hand forward/reverse switch. Lightweight at only 4.2 lbs. Made in the U.S.A. All brass. Powerful 3/8" pistol grip drive impact wrench. 180 ft-lb maximum torque. Consistent torque, even with air pressure changes. More torqe with less vibration. Lightweight and compact. Built-in power regulator helps control torque. Jumbo hammer impact mechanism. Pressure feed lubrication system.
Ingersoll-Rand Edge Pro 2317G Air Impact Wrench Kit Ingersoll-Rand 2115TIMAX Industrial Duty Air Impact Wrench Ingersoll-Rand 3445MAX Pneumatic Angle Grinder
Variable speed trigger, twin hammer impact mechanism, ergonomic grip, powerful 6-vane motor and easy to use forward/reverse power regulator. Includes: 1/2" impact tool 231G, 3/8" ratchet 170G, a socket set, and a blow-molded carrying case. Allows greater access to tight spaces, while the minimal weight (2-1/2 lbs) reduce operator fatigue. Hard coat anodized end plate stands up to tough jobs. 4 position power regulator dial for max control. Improved grease fitting for easy maintenance. One hand forward/reverse for easy operation with 300 ft-lbs max power. 7-vane motor for more power. Ergonomic housing offers greater operator comfort. Feather touch trigger enables impressive control. Optimized air flow ensures maximum performance. Quiet tool technology reduces sound levels without compromising power performance. Lightweight design with composite grip for improved comfort. Locking lever with tease throttle and rear exhaust. Side handle can be used on left or right. Specs: 0.88 HP, 4-1/2", 12,000 RPM, 5/8" -11 thread, 4-1/2" disc capacity, 10 CFM, 41 CFM at load, 3/8" min hose, 1/4" inlet.
ThunderGun 232TGSL Air Impact Wrench WRENCH IMPACT 1/2IN 930FT/LBS Ingersoll-Rand 261 Air Impact Wrench
As close as you can get to the real racing tools. Delivers power, speed, and durability for shop tasks. Specs: 625 ft.-lbs. of torque in reverse, with 10,000 rpm. Powerful and durable. Provides 1,350 lbs of torque and 930 ft-lbs of max reverse torque powered by Ingersoll Rand's finely tuned twin-hammer impact mechanism. Weighs only 4.6 lbs, providing less weight so you can work harder and faster for longer periods of time. Lightweight and easy to operate with handle exhaust and oil bath lubrication. Full power in reverse. 3-position adjustable power in forward. Integral 360-degree swivel inlet. Specs: 1,100 ft.-lbs. of max torque. 200-900 ft.-lbs. working torque, 1,200 BPM, 5,500 RPM, 9.5 CFM, 38 CFM at load, 98.1/109.1dBA. 12.4 lbs. tool weight. 9" tool length.
Ingersoll-Rand 2145QIMAX Air Impact Wrench Ingersoll-Rand 285B-6 General Duty Air Impact Wrench
Delivers incredible performance and industrial grade durability in an impact wrench. Efficient air consumption to save you money. 1,350 ft-lb max reverse torque is compact to access tight spaces. Built to last and designed to withstand tough use in rugged environments. Easy to clean inlet screen means less downtime and better tool performance. Combines power, control and durability. Delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed at 120 psi (8.3 bar) and features a high efficiency 6-vane motor. The integral 360 degree swivel inlet makes kinked hoses a thing of the past. The swept-back handle provides ideal maneuverability, with an available 6" extended anvil for even more accessibility. Improved feather touch trigger.
   
 
1