Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR COMPRESSOR HOSES
Sort By:
1
Stanley THREADTAPE Thread Sealant Tape Plews 21-557 Drain Cock Mintcraft FDQ910 Inflation Kit
Properly seals all male threaded connections to prevent air leaks. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle.
North American 9402 Speedway Air Inflation Kit Plews/Edelmann 18-603 Air Blow Guns Plews/Edelmann 18-319 Tru-Flate Air Safety Blow Guns
Ideal for inflating toys, rafts, sports equipment and more. Includes 1/4" NPT female connector, 1/4" x 1/8" connector, inflation needle, tapered nozzle and extension tube. Use with any compressor and hose. Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies. Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI.
Nati 9390 Air Hose 25 ft Plews 4-25E-RET Recoil Air Hose Stanley 3WAY-RND 3-Way Round Air Line Manifold
Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum.
Stanley BTFP72330 Safety Blow Gun Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru Flate 18-143 Clip-On Safety Blow Gun
Safety blow gun. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Converts any standard ball foot tire chucks to a safety blowgun.  Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure.  Conforms to No.1001 OSHA regulation. Epoxy finish.
Mintcraft CC970 Air Blow Gun Plews/Edelmann 18-231 Tru-Flate Air Blow Guns Tru-Flate 21-707 Safety Valve
Die-cast body. 1/4" air inlet. Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI.
Plews/Edelmann 18-302 Tru-Flate Air Safety Blow Guns Tru Flate 18-207 Standard Blow Gun Tru Flate 18-233 Safety Blow Gun
Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension. Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI.
Plews 576-25A Air Hose Plews 4-50E-RET Recoil Air Hose Tru Flate 18-203 Standard Blow Gun
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
Plews/Edelmann 18-241 Air Blow Gun Kits Bostitch BTFP72641 Inline Lubricator Nati 9411 Air Hose 25 ft
Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator nozzle. In line lubricator feeds oil to tool being hooked up to compressor. Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi.
Tru-Flate 24-801 Air Line Pressure Gauge HOSE AIR POLY BLUE 1/4INX25FT Plews 554-50A-10 Air Hose
PSI 0-200  0-14 kg/cm2; mounting back. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Quality  multi-purpose air hose. Light weight, flexible, kink-resistant design. 300 PSI.
Plews 576-50A Air Hose Plews/Edelmann 18-221 Tru-Flate Air Blow Guns Nati 9389 Air Hose 50 ft
Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi.
Bostitch BTFP72326 Mini Regulator and Gauge Kit Mintcraft Tire Inflator Gauge BLOWGUN SET 2PC
BLOWGUN SET 2PC
Our Price: $17.79
Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT. Light-weight aluminum body with OSHA compliant safety nozzle. 40 CFM
Plews 41-135 Air Line Regulator with Gauge HOSE AIR 3/8X50FT             Nati 50059 Air Hose 25 ft
HOSE AIR 3/8X50FT
Our Price: $18.80
Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends. Ultra Air takes hybrid to a new level, offering increased cold weather flexibility over competitive hoses. When uncoiled, this hose lays flat making it easier to use with no interruption in air flow or tripping hazards. Lighter in weight than rubber and more flexible than PVC; features bend restrictors. Stays flexible, -40 to 150 degrees F. 300 PSI. Extremely lightweight and flexible air hose provides ideal performance in all climates. Solid brass fittings: 1/4" - 18 NPT. Oil and abrasion resistant. Heavy duty braided reinforcement. Working temperature range from 30 to 150 degrees F. Maximum working pressure of 250 psi.
Plews/Edelmann 41-101 Air Tool Oilers Plews 12-50E Poly Air Hose Nati 9412 Air Hose 50 ft
Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Ideal for a wide range of home and job-site applications. 3/8". Simple and convenient storing, without taking away the needed length required on the job-site. 300 psi.
Prohoze HOPB1450 Air Hose Plews 576-100A-5 Air Hose Tru-Flate 24-343 Manual Mini Air Line Filter
All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends. Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height.
Thermoid 522-25 Coupled Air Hose Sta-Lube SL22133 Air Compressor Oil Thermoid 538-25 Coupled Air Hose
Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure. Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
Stanley Industrial Air Compressor Regulator with Gauge Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge REGULATR TOOL AT-HAND INLN AIR
Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height. Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI.
Plews 12-100E Air Hose Tru-Flate 41-175 Air Compressor Accessory Kit Prohoze HOPB14100 Air Hose
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment. All weather flexibility with working temperature range of -40 degrees to 164 degrees F. Heavy duty reinforced braided hose designed with contractor in mind. 300 psi max working pressure with 900 psi burst strength for toughness and safety. End restraints designed for longer hose life.
AIR HOSE PROFLEX 1/4IN X 50FT Abbott Rubber 1502-38X50MM Air Hose 50 ft Prohoze PRO-1450 Air Hose
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Rubber hose, durable, abrasion resistant. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions.
Plews 13-50AE Air Hose Plews 552-50AK-5 Air Hose Kit Thermoid 522-50 Coupled Air Hose
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in  garage, shop, industry,  or home. Includes: Safety blow gun, coupler and plugs, 5 different tips. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
Tru-Flate 41-907 Air Tank Conversion Kit Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge Thermoid 538-50 Coupled Air Hose
Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary. Multiple spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures and brass NPT male fittings; 250 pound working pressure.
AIR HOSE PROFLEX 3/8IN X 50FT Tru-Flate 24-301 Manual Compact Air Line Filter Tru-Flate 24-311 Manual Air Line Filter
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces.
Stanley PRECOMOIL-32OZ Pneumatic Tool Lubricant Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge Abbott Rubber 1010-03825-50-4MM Quick Connect Air Hose 50 ft
Designed to reduce carbon buildup in compressor valves to ensure a longer compressor life. Provides the proper mix of lubricants for compressors to function properly and efficiently. Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz. Rubber hose, durable, abrasion resistant.
AIR HOSE PROFLEX 1/4IN X 100FT Prohoze PRO-14100 Air Hose Abbott Rubber 1025-0750R-50-CRS 2-Lug Air Hose 50 ft
Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel resistant. Reinforced braiding. Reusable hose guards and fittings. Rugged reinforced polyurethane construction is abrasion, puncture and chemical-resistant. Flexible from -40 to 160 degrees F for revolutionary workability. Reusable 1/4" MPT fittings are field repairable in three easy steps. Non-marring translucent material provides a clear view of airline contaminants. Hi-vis safety yellow color for improved jobsite visibility. Snap-fit strain reliefs provide flexible reinforcement for extended life. Up to 2x lighter than standard air hoses. Ribbed design prevents hose from sticking to itself or other jobsite obstructions. Rubber hose, durable, abrasion resistant.
Plews 13-100AE Air Hose Plews 510HR-RET Retractable Air Hose Plews 545HR-RET Reel Air Hose
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. All steel construction for industrial applications. Spring powered auto rewind. Ideal for mounting of wall, floor or ceiling. Guide arm adjustable for different angles. Valve assembly handles up to 250 PSI and 25 cfm. Locking ratchet brake. Features all-steel construction and a spring tension brake to prevent accidental unwinding. Mounts in either direction. Polyurethane with dual output fittings. 200 PSI working pressure.
FLOORING NAILER 2 IN 1        Senco SHF200 RW Strip Floor Nailer Stanley MIIIFN Angled Hardwood Flooring Cleat Nailer
FLOORING NAILER 2 IN 1
Our Price: $252.52
Drives 15.5 gauge staples and 16 gauge "L" Cleat nails from 1-1/2" to 2" length. Non-marring, interchangeable base plates for 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. Ergonomically designed with longer handle and comfortable rubber grip. Lower CFM requirements at 3.7 SCFM. Mallet actuated pneumatic driving action. Lightweight at only 10.85 lbs. Includes Mallet, oil, wrenches, 1/4" (6.4 mm) air fitting with dust cover. Pneumatic mallet actuated hardwood flooring cleat nailer for installation of 1/2"-3/4" (12-19mm) hardwood and laminate flooring. Easy on the arm the pneumatic action requires a single strike to drive faster. Non-marring base that adjust between 1/2" and 3/4" flooring without the use of tools. Lightweight and well balanced. Safety trigger prevents accidental ejection of fasteners. Extra long ergonomic handle reduces the amount the operator has to bend over. Includes mallet, oil, wrenches and 1/4" air fitting. For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5"; Length: 17.25"; Width: 3.13"; Weight: 11.2 lbs; Driving Power: 420 Inch Lbs; Operating Pressure: 70-90 PSI; Thread Fitting Type: 3/8" NPT; Magazine Capacity: 110 Cleats. Fastener Specifications: Drives 1-1/2 to 2" Cleat Nails. Includes: Nailer; Graphite Mallet; Pre-Finished Flooring Adapter Foot; Base Plates: 1/2" & 3/4".
   
 
1