Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR TOOL ACCESSORIES
Sort By:
1
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 21-535 Air Hose Bushing
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends.
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 12-135 Air Line Nipple
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-335 Air Line Plug Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-222 Air Hose Fitting
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-505 Air Line Coupling Stanley TIRE-14F Tire Chuck
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. Plated steel; corrosion resistant steel for long life.
Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 21-242 Air Hose Fitting Stanley 38M-14M Hex Reducer Nipple Tru-Flate 12-605 Air Line Plug
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Connects FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 17-351 Ball Foot Direct Air Line Chuck
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. Plug 1/4". I/M x 3/8" MNPT. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 12-425 Air Line Plug
Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-467 Barb Hose Splicer Senco PC0101 Air Tool Oil Tru-Flate 12-603 Air Line Plug
All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Premium-grade oil formulated with high-quality paraffin distillate stocks. Contains carefully balanced rust and oxidation inhibitors. Lubricates Pneumatic tools, protects against corrosion and extends part life. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews/Edelmann 12-611  Air Compressor Hose Fittings PLUG 3/8IN TF X 3/8IN FNPT    Stanley AP-38F Auto Hose Adapter
Plug 3/8". TF x 1/4" FNPT. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter 3-IN-ONE 120046 Pneumatic Tool Oil
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. Marksman spout for easy precision application. Professional grade formula. Lubricates and protects to extend tool life. Quickly removes gum and sludge. Prevents rust.
Marvel Mystery MM080R Air Tool Oil With Childproof Cap Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male Blaster 16-ATL Air Tool Lubricant
Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Lubricates and protects internal tool parts. Formulated for use with in-line oilers. Removes moisture and provides lubrication. Protects tools against high speeds and shock loads. Use on all pneumatic tools and equipment.
Tru-Flate 12-705 Air Line Plug Pro-Fit 0063198 Casing Nail Pro-Fit 0063178 Casing Nail
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Use around door and window trim, decks. Use around door and window trim, decks.
Tru-Flate 17-355 Snap Clip On Air Line Chuck Blaster 16-ATC Air Tool Conditioner Stanley IC-14M Industrial Hose Adapter
Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Cleans and restores pneumatic tool parts. Breaks loose deposits that create friction. Reaches deep into small recesses to leave a protecting film of lubrication. Can be used as in-line lubricant. Removes moisture. An effective antifreeze. Protects tools from freezing down to -25 degreesF. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections.
Stanley IC-14F Industrial Hose Adapter Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler
Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Tru-Flate 13-235 Industrial Air Line Coupler Tru-Flate 13-225 Air Line Coupler Stanley Industrial IHKIT-14F Hose Coupler Kit
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life.
Bostitch BTFP72327 Ball Drain Valve COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT
Turn ball type drain valve. 1/4" NPT male thread. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
Stanley HREPAIR-38 Hose Splice Kit Tru-Flate 41-300 Hose Repair Kit Tru-Flate 13-125 Air Line Coupler
Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose; (1) barb x barb hose splicer for 3/8" hose & (3) Clamps. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-383 Dual Foot Direct Air Line Chuck Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Stanley TEE-14F Tee Fitting
Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass
Marvel Mystery MM85R1 Air Tool Oil With Childproof Cap Tru-Flate 13-135 Air Line Coupler Plews/Edelmann 18-603 Air Blow Guns
Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies.
Stanley BTFP72330 Safety Blow Gun Plews/Edelmann 18-319 Tru-Flate Air Safety Blow Guns Tru-Flate 13-201 Coupler/Plug Set
Safety blow gun. Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-335 Air Line Coupler Tru-Flate 21-605 Barb Air Line Swivel
Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
Plews/Edelmann 13-237 Hose Coupling Tru-Flate 13-325 Air Line Coupler Tru Flate 18-143 Clip-On Safety Blow Gun
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Converts any standard ball foot tire chucks to a safety blowgun.  Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure.  Conforms to No.1001 OSHA regulation. Epoxy finish.
Tru-Flate 13-101 Coupler/Plug Set Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Mintcraft DZA019 Hose Coupler Set
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler.
Tru-Flate 13-301 Coupler/Plug Set Mintcraft CC970 Air Blow Gun Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Die-cast body. 1/4" air inlet. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Tru-Flate 13-435 Air Line Coupler Tru-Flate 13-425 Air Line Coupler Tru-Flate 13-537 Air Line Coupler
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Plews/Edelmann 13-603 Hose Coupling Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-605 Hose Coupling
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru Flate 18-233 Safety Blow Gun Plews/Edelmann 18-231 Tru-Flate Air Blow Guns Plews/Edelmann 18-302 Tru-Flate Air Safety Blow Guns
Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI. Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet. Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension.
Tru Flate 18-207 Standard Blow Gun Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-613 Air Line Coupler
Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-527 Air Coupler Tru-Flate 13-401 Coupler/Plug Set
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru Flate 18-203 Standard Blow Gun Tru-Flate 12-537 Air Hose Plug Pro-Fit 0053265 Interior Common Nail
Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Pro-Fit Common Nail, Interior, Pro-Fit, 8 in Length, Spike Head, 3/4 in Head, 3/8 in, Smooth Shank, Steel, Bright, For General Rough Framing and Construction
Pro-Fit 0053275 Interior Common Nail Pro-Fit 0053285 Interior Common Nail Plews/Edelmann 18-241 Air Blow Gun Kits
Pro-Fit Common Nail, Interior, Pro-Fit, 10 in Length, Spike Head, 3/8 in Head, 3/4 in, Smooth Shank, Steel, Bright, For General Rough Framing and Construction Pro-Fit Common Nail, Interior, Pro-Fit, 12 in Length, Spike Head, 3/8 in Head, 3/4 in, Smooth Shank, Steel, Bright, For General Rough Framing and Construction Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator nozzle.
BLOWGUN SET 2PC               COUPLER-PLUG SET 4PC          Pro-Fit 003265 Log Spike
BLOWGUN SET 2PC
Our Price: $16.25
COUPLER-PLUG SET 4PC
Our Price: $16.36
Light-weight aluminum body with OSHA compliant safety nozzle. 40 CFM Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. Pro-Fit Log Spike, 8 in Length, 17/32 in Head, 1 ga, Spiral Shank, Bright, Used to Landscaping and Log Cabin Construction, Framing
Pro-Fit 003275 Common Log Spike Pro-Fit 003285 Common Spike Tru-Flate 13-713 Air Line Coupler
Pro-Fit Common Log Spike, 10 in Length, 9/16 in Head, Spiral Shank, For Landscaping, Log Cabin Construction and Framing Pro-Fit Common Spike, 12 in Length, 9/16 in Head, Spiral Shank, For Landscaping, Log Cabin Construction and Framing Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews/Edelmann 18-221 Tru-Flate Air Blow Guns Pro-Fit 63135 Casing Nail Pro-Fit 063155 Casing Nail
Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Use around door and window trim, decks. Use around door and window trim, decks.
Pro-Fit 0063195 Casing Nail Mintcraft Tire Inflator Gauge Pro-Fit 089225 Stiff Stock Pole Barn Nail
Use around door and window trim, decks. Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT. Pro-Fit Pole Barn Nail, Stiff Stock, 5 in Length, 3/8 in Head, 7 ga, Ring Shank, Used in Pole Building Construction
Pro-Fit 089215 Stiff Stock Pole Barn Nail Mintcraft CC910 Air Tool Accessory Kit Mintcraft ATA-052-1 Hose Plug
Pro-Fit Pole Barn Nail, Stiff Stock, 4-1/2 in Length, 3/8 in Head, 7 ga, Ring Shank, Used in Pole Building Construction Includes: 1 piece tapered brass inflator; 1 piece inflation needle; 2 piece 1/4'' female brass plugs; 4 piece 1/4'' male brass plugs; 1 piece dual tire chuck; 1 piece pencil tire gauge; 1 piece brass blow gun; 1 piece brass safety nozzle. 2 piece male brass hose connectors; 1 piece 1/4" quick brass coupler. 1 piece air blow gun; 1 piece female brass hose connector. High speed steel.
Mintcraft ATA-053-A Hose Plug Stanley PREMOIL-4OZ Grade Pneumatic Tool Lubricant Senco PC1195 Mini Hand Nailer
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components. Powerful enough to drive bulk nails into joist hangers, hurricane straps, fencing or decking. Fifty percent lighter than traditional palm nailers and is ideal for exceptionally tight spots. Specifications; Reg. Operating Pressure: 60-110 psi (4.-7.6 bar). Air Consumption: 2 - 4 scfm. Length: 2 3/4" (69.9 mm); Width: 2" (55.6 mm). Fastener Specifications: Drives 2" - 3-1/2", 6d to 16d Bulk Nails. Includes Wrench. Tool Oil Required. Aluminum Housing & Rear Exhaust.
Stanley PREMOIL-20OZ Grade Pneumatic Tool Lubricant Stanley PN50 Mini Impact Nailer Stanley WINTEROIL-20OZ Winter Grade Pneumatic Tool Lubricant
Formulated for pneumatic tools. Blended using premium grade turbine oil. Formulated for high speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components. Rubber grip designed to insulate and reduce vibration; 360 degree swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm. Fastener Specifications: Drives Most Common Bulk Finish, Framing & Timber Nails. Prevents moisture coming into the tool from freezing.
Stanley WINTEROIL-4OZ Winter Grade Pneumatic Tool Lubricant Mintcraft ATA-050 Air Hose Connector Mintcraft TA-054 Air Hose End
Prevents moisture coming into the tool from freezing. Brass. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Pro-Fit 0029053 Heat Treated Masonry Nail Pro-Fit 0029093 Heat Treated Masonry Nail Pro-Fit 29133 Heat Treated Masonry Nail
Temper hardened steel. Used for nailing lumber to concrete and masonry. Temper hardened steel. Used for nailing lumber to concrete and masonry. Temper hardened steel. Used for nailing lumber to concrete and masonry.
Pro-Fit 29153 Heat Treated Masonry Nail Pro-Fit 29173 Heat Treated Masonry Nail Mintcraft ATA-057 Hose Plug
Temper hardened steel. Used for nailing lumber to concrete and masonry. Temper hardened steel. Used for nailing lumber to concrete and masonry. Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass
Mintcraft ATA-0561 Air Line Connector Mintcraft ATA-0243L Barb Hose Splicer Senco PC0781 Hand Nailer
Brass. All brass. Fits in the palm of the hand, making it ideal for joust hangers, metal straps and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar). Height: 5.8"; Weight: 2.4 lb. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes Leather grip.
Stanley PN100K Air Impact Nailer Kit Pro-Fit 93142 Square Cut Heat Treated Masonry Nail Pro-Fit 93152 Square Cut Heat Treated Masonry Nail
Ideal for framing or remodeling; drives common bulk nails in confined areas and nails metal connectors or joist hangars. Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement. Hardened steel nose. Specs: 70 to 100 PSI;  1/4" NPT; Height: 5-1/4"; Length: 4-1/8" ; Width: -1/2";  Weight: 2.9 lbs. Includes: Impact Nailer with Standard Nose; Finish Nail Nose; Large Bore Nose; Leather Comfort Glove; Nose Wrench; Hex Wrench; Tool Lubricant and Spare O-Rings. Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete. Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
Pro-Fit 0093172 Square Cut Heat Treated Masonry Nail Pro-Fit 0093192 Square Cut Heat Treated Masonry Nail Pro-Fit 093132 Square Cut Heat Treated Masonry Nail
Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete. Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete. Hardened steel with blunt point and tapered shank cause minimal spalling during penetration and offers even greater pull-out resistance than wire masonry nails. Ideal for attaching wood members to cinder block walls as well as to fresh concrete.
Mintcraft ATA-055 Quick Coupler Mintcraft ATA-056 Quick Coupler NAILER BRAD 18GA 20V LITHIUM
All brass. All brass. 100 percent battery power eliminates the need for a compressor, hose or costly gas cartridges. Motor design provides consistent firing power into various materials and climate conditions. Multiple tool-free settings provide ease of use. Unit's lightweight at only 5.9 lbs and optimal center of gravity provides user comfort in multiple positions reducing user fatigue. Multi functional dual LED lights function for workspace illumination and error indication. Fastener length capacity: 5/8-2", magazine capacity: 100. Side loading magazine.
STAPLER KIT 18GA 20V LITH NARO Stanley MFN-201 Manual Flooring Nailer STAPLER NRRW CROWN BA 20V 18GA
100 percent battery power eliminates the need for a compressor, hose or costly gas cartridges. Motor design provides consistent firing power into various materials and climate conditions. Multiple tool-free settings provide ease of use. Unit's lightweight (6.1 lbs) and optimal center of gravity provide user comfort in multiple positions, reducing user fatigue. Multi functional dual LED lights function for workspace illumination and error indication. 1/4" crown size. Fastener length capacity 1/2" - 1-1/2". Magazine holds 100 staples. Sequential firing mode. The kit includes stapler, battery and charger. For installing 1/2", 5/8" and 3/4" hardwood floors. Selectable drive mode to choose between single or multi-blow options. Graphite mallet with ergonomic comfort grip. Rubber bumpers protect pre-finished floors against marring. Specs: Weight 8.6 lbs; Magazine Capacity: 120 Cleat Nails; Fastener Specifications: Drives 1-1/2" to 2" Bostitch 'L' Shaped Hardwood Flooring Cleats. Includes: Flooring Nailer; Mallet; Flooring Adaptors (for 1/2" & 5/8" flooring); Flooring Hex Wrenches & Contractor Carrying Case Battery powered, tool-free selectable trigger, low nail lockout, bottom load magazine, brushloess motor, tool-free depth adjustment. Compatible with all Dewalt 20V MAX batteries. Compatible with 1/" to 1-1/2"  18GA 1/4"  narrow crown fasteners.  Batery not included.
NAILER BRAD BARE 20V 18GA     NAILER FINISH 16GA 20V LITHIUU NAILER BRAD KIT 20V 18GA
NAILER BRAD BARE 20V 18GA
Our Price: $256.49
NAILER BRAD KIT 20V 18GA
Our Price: $307.79
100% battery powered. Eliminates the hassle of using gas, compressor and hose. Micro nose improves line of sight and accuracy of nail placement. Tool free depth adjustment for precise countersinking of nails. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool free selectable trigger for sequential or contact actuation modes. Brushless motor maximizes run-time and durability. Tool free jam release to quickly and easily clear nail jams. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference. Low nail lockout prevents dry firing and unwanted marks on the work material. Compatible with all Dewalt 20 volt Max batteries. Lightweight at only 5.3 lbs. Tool Only. Battery Not Included. 100 percent battery power eliminates the need for a compressor, hose or costly gas cartridges. Motor design provides consistent firing power into various materials and climate conditions. Multiple tool-free settings provide ease of use. Unit's lightweight (9.25 lbs) and optimal center of gravity provide user comfort in multiple positions, reducing user fatigue. Multi functional dual LED lights function for workspace illumination and error indication. 1/4" crown size. Fastener length capacity 1" - 2-1/2". Magazine holds 100 nails. Sequential firing mode. The kit includes stapler, battery and charger. Eliminates the hassle of using gas, compressor and hose. Micro nose improves line of sight and accuracy of nail placement. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Adjustable belt hook for left or right attachment depending on user preference. Tool free depth adjustment for precise countersinking of nails. Compatible with all Dewalt 20 volt Max batteries. Brush-less motor maximizes run time and durability. Tool free selectable trigger for sequential or contact actuation modes. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. Included with the Brad Nailer is (1) 2.0 Ah battery, (1) charger and a handy kit bag.
STAPLER NRRW CROWN KT 20V 18GA NAILER BRAD KIT 20V 18GA      FINISH NAILER 20V 16GA CORDLSS
NAILER BRAD KIT 20V 18GA
Our Price: $307.96
Eliminates the hassle of using gas, compressor and hose. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Adjustable belt hook for left or right attachment depending on user preference. Tool free depth adjustment for precise countersinking of staples. Tool free selectable trigger for sequential or contact actuation modes. Brush-less motor maximizes run time and durability. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. Compatible with all Dewalt 20 volt Max batteries. Included with the Narrow Crown Stapler is (1) 2.0 Ah battery, (1) charger and a handy kit bag. The 18 gauge straight finish nailer is 100 percent battery powered to save time and money. Drives nails from 5/8" to 2-1/8". Features a narrow nose designed for clear line of sight and accuracy of nail placement. Tool-free jam release to quickly and easily clear nail jams. Tool-free depth adjustment for precise countersinking of nails. Tool-free selector switch for sequential or contact actuation modes.  Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment. Low nail lockout prevents dry firing and unwanted marks on the work material. Brushless motor for optimal runtime and durability. Weighs only 5.4 lbs. The Kit includes the 18 gauge Straight Brad Nailer, High Capacity Li-Ion battery, Charger and Kit bag. Tool Only. Drives 16 gauge 20 degree angled finish nails from 1-1/4" to 2-1/2". Up to 800 nails per charge (Battery Not Included). Multifunctional LED lights for work space illumination and tool diagnostics. Tool-free depth adjustment for precise countersinking of nails. Trigger lock-off allows trigger to be disabled when tool is not in use. Tool-free selectable actuation modes: sequential mode for precision placement and bump mode for production speed. Tool-free jam release to quickly and easily clear jammed nails. Adjustable belt hook. Integrated tool-free stall release lever to quickly reset the drive blade in the event of a stall. No-mar tips included to prevent damage to the work surface. Magazine holds up to 110 nails. Weighs only 5.2 lbs. Compatible with all Dewalt 20 volt max batteries (Not Included).
NAILER ANGL FNSH 20V 15GA BARE STAPLER ENG FLR BARE 20V 18GA FRAMING WW BARE 20V 28 DEG
FRAMING WW BARE 20V 28 DEG
Our Price: $329.58
100% battery powered. Eliminates the hassle of using gas, compressor and hose. Micro nose improves line of sight and accuracy of nail placement. Tool free depth adjustment for precise countersinking of nails. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool free selectable trigger for sequential or contact actuation modes. Brushless motor maximizes run-time and durability. Tool free jam release to quickly and easily clear nail jams. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. Inline magazine provides easy use in multiple orientations and in tight spaces. Adjustable belt hook for left or right attachment depending on user preference. Compatible with all Dewalt 20 volt Max batteries. Lightweight at only 5.8 lbs. Battery powered flooring stapler with brush-less motor maximizes run time and durability. Eliminates the hassle of using gas, compressor or hose. Paddle trigger provides easy use in multiple orientations. Tool free adjustable base accommodates flooring thickness from 3/8" to 5/8". Tool free selectable trigger for sequential or rapid sequential actuation modes. Multi-functional lights help to provide both workspace illumination and tool diagnostics. Bottom load magazine for easy loading and removal of jammed fasteners. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. High visibility tongue engagement for fast installation of non-marring profile tips to prevent floor scratches. Compatible with all Dewalt 20 volt Max batteries. Battery Not Included. Tool Only. This cordless framing nailer drives framing nails up to 3-1/2". Features a 2-speed motor and has tool free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28 degree wire weld collation and comes with a rafter hook. Brushless motor and engine design includes two speeds for optimized performance. Stall release lever to reset driver blade in case of jam. Compatible with all Bostitch 20 volt Max batteries. Weighs only 8.1lbs.
FRAMING PAPER TP KIT 20V 30DEG FRAMING NAILER 20V 2SP BRUSHLS Senco 5N0001N Cordless Fusion Nailer
This 30 degree paper tape cordless framing nailer lets you go cordless with the features you expect in a pneumatic tool. The two speed motor drives a full range of framing nails and features a tool-free firing mode selector to quickly change between sequential and bump fire modes. It accepts clipped and full round head nails in a 30-34 degree paper tape collation and also features a rafter hook and a tool free depth adjustment. A no-mar tip is included. Stall release lever to reset driver blade in case of a jam. Weighs only 8.1 lbs. Batteries not included. Tool Only. Brushless motor and engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints. Dual speed selector switch optimizes speed for faster lengths. Trigger lock-off allows trigger to be disabled when tool is not in use. Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Easy access to the nosepiece to remove jammed nails. Top cap is impact resistant and easy to remove for troubleshooting. Belt/rafter hook allows the tool to be kept near the user. No-mar pads to prevent damage to the work surface. Rear load magazine. Weighs only 7.8 lbs. Experience award winning cordless convenience in an all-day, everyday cordless pneumatic trim tool. Features instant shot performance with no ramp up time. No hose or air compressor to drag around. Never buy fuel cells again. Thumbwheel depth-of-drive adjustment. Specs: Selectable actuation trigger, Fastener capacity: 110, Compatible fasteners: type: DA, gauge: 15, range: 1-1/4"-2-1/2", Collation: 34 degree angled strip finish nails. 13"H x 13"L x 3"W, weighs 6.2 lbs. Includes: (1) 18 volt Li-Ion battery, (1) charger and (1) storage bag.
Senco 6E0001N Cordless Fusion Nailer NAILER FINISH ANGLED 16GA 20V NAILER METAL CNCTR TOOL 20V
Experience award winning cordless convenience in an all-day, everyday cordless pneumatic trim tool. Features instant shot performance with no ramp up time. No hose or air compressor to drag around. Never buy fuel cells again. Thumbwheel depth-of-drive adjustment. Specs: selectable actuation trigger firing mode, one Li-ion 18v, 80-percent in 15 minutes, 100-percent in 45 minutes, 110 fastener capacity, 13" H x 11" L x 3" W, 5/8 - 2-1/8" fastener range, galvanized finish, straight glued strip collation and weighs 6 lbs. Includes: (1) 18 volt Li-Ion battery, (1) charger and (1) storage bag. Tool-free selectable trigger for sequential or contact actuation modes. Tool-free jam release to quickly and easily clear nail jams. 100 percent battery powered. Eliminates the hassle of using gas, compressor and hose. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Inline magazine provides easy use in multiple orientations and in tight spaces. Brushless motor maximizes runtime and durability. Tool-free depth adjustment for precise countersinking of nails. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Adjustable belt hook for left or right attachment depending on user preference. Magazine capacity 110. Length 1-1/4 to 2-1/2". Compatible with all Dewalt 20 volt Max batteries. Tool Only. Brushless motor and engine design provides the power to sink both 1-1/2" and 2-1/2" fasteners. Rapid cycle mode for speed, sequential mode for accuracy. Tip probe guide for precision placement of fasteners. Magazine holds up to 25 nails. Tool weighs 8.1 lbs.
NAILER ANGLE FNSH KT 20V 15GA NAILER STRT FINISH KT 20V 16GA NAILER ANGLED FINISH 20V 15GA
This cordless 15 gauge finished nailer helps you save time and money. 100 percent battery powered. Drives nails from 1-1/4" to 2-1/2". Features a narrow nose designed for clear line of sight and accuracy of nail placement. Tool-free depth adjustment and a tool-free selector switch for sequential or contact actuation modes. Tool free jam release to quickly and easily clear nail jams. Multi-functional LED lights helps to provide both workspace illumination and tool diagnostics. Tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment. Inline magazine provides easy use in multiple orientations and in tight spaces. Brushless motor for optimal run time and durability. Weighs only 5.8 lbs. Includes the Angled Finish Nailer, High Capacity Li-Ion battery, Charger and kit bag. The 16 gauge straight finish nailer is 100 percent battery powered to save time and money. Drives nails from 1-1/4" to 2-1/2". Features a narrow nose designed for clear line of sight and accuracy of nail placement. Tool-free jam release to quickly and easily clear nail jams. Tool-free depth adjustment and a tool-free selector switch for sequential or contact actuation modes.  Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment. Brushless motor for optimal runtime and durability. Weighs only 5.6 lbs. The Kit includes the 16 gauge Straight Finish Nailer, High Capacity Li-Ion battery, Charger and Kit bag. Eliminates the hassle of using gas, compressor and hose. Micro nose improves line of sight and accuracy of nail placement. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Adjustable belt hook for left or right attachment depending on user preference. Inline magazine provides easy use in multiple orientations and in tight spaces. Compatible with all Dewalt 20 volt Max batteries. Brush-less motor maximizes run time and durability. Tool free selectable trigger for sequential or contact actuation modes. Tool free jam release to quickly and easily clear nail jams. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. Included with the Angled Finish Nailer is (1) 2.0 Ah battery, (1) charger and a handy kit bag.
STAPLER FLOORING KIT 20V 18GA FRAMING PAPER TP KIT 20V 30DEG FRAMING WIRE WELD KT 20V 28DEG
Battery powered flooring stapler with brush-less motor maximizes run time and durability. Eliminates the hassle of using gas, compressor or hose. Paddle trigger provides easy use in multiple orientations. Tool free adjustable base accommodates flooring thickness from 3/8" to 5/8". Tool free selectable trigger for sequential or rapid sequential actuation modes. Multi-functional lights help to provide both workspace illumination and tool diagnostics. Bottom load magazine for easy loading and removal of jammed fasteners. Integrated tool free stall release lever to quickly reset the driver blade in the event of a stall. High visibility tongue engagement for fast installation of non-marring profile tips to prevent floor scratches. Compatible with all Dewalt 20 volt Max batteries. Included with the Flooring Stapler is (1) 4.0Ah battery, (1) charger and a handy kit bag. Two speed motor drives a full range of framing nails, and a tool free firing mode selector lets you quickly change between sequential and bump free modes. The tool accepts clipped and full round head nails in a 30 degree paper tape collation and also features a rafter hook and a tool free depth adjustment. Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners. Stall release lever to reset driver blade in case of a jam. Use for framing, sheathing, deck building, fencing and other tasks. Weighs only 8.1 lbs. Kit includes Paper tape framing nailer, 20 volt max high capacity Li-Ion battery, charger and kit bag. 100 percent battery powered with this cordless framing nailer. Drives framing nails up to 3-1/2". Features a 2 speed motor and has tool free depth adjustment and selection to quickly change between sequential and bump fire modes. It accepts full round offset nails in 28 degree wire weld collation and also comes with a rafter hook. Stall release lever to reset driver blade in case of a jam. Rear load magazine. No mar pad. Weighs only 8.1 lbs.
Black and Decker DCN692M1  Pneumatic Framing Nailers NAILR FRMG PLST STRP CRDLS 18V NAILER FRMG PPR CLTD CRDLS 18V
Brushless motor and engine design provides enough power to drive 3-1/2" nails. Sequential operating mode allows for precision placement and bump operating mode provides the user with production speed. Dual speed optimizes motor speed for different nail lengths. Easy access to the nosepiece for the removal of jammed nails. Trigger Lock-Off allows trigger to be disabled when tool is not in use. Top cap is impact resistant and easy to remove for troubleshooting. Accepts 30-34 degree paper tape nails. Clipped head or offset full round head. Stall release lever quickly resets the drive blade. Includes DCB101 charger, (1) 20 volt Max XR premium Li-ion battery (4.0 Ah) and no-mar tip. Tool height 13.75"; Tool width 4.7"; Tool length 16"; Tool weight 9.1 lbs. Unique air spring drive system. Brushless motor for longer run time per charge. Tool-less depth of drive adjustment for a professional finish of varying materials. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Battery charge indicator on tool control panel. Pivoting rafter hook for easy storage. Specs: Weight: 10.8 lbs.; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing. Fastener Specifications: Fastener Type: Paper Strip Collation; Magazine Capacity: 37 Nails; Magazine Loading: Rear; Magazine Angle: 21 Degrees; Nails Per Charge: 400; Fastener Length: 2" - 3-1/2"; Fastener Diameter: Range .113 - .131. Included: Battery, Safety Glasses, Rapid Charger, and Contractor Bag. Unique air spring drive system. Brushless motor for longer run time per charge. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Battery charge indicator on tool control panel. Pivoting rafter hook for easy storage. Specs: Weight: 10.6 lbs.; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing. Fastener Specifications: Fastener Type: Paper Strip Collation; Magazine Capacity: 47 Nails; Magazine Loading: Rear; Magazine Angle: 30 Degrees; Nails Per Charge: 400; Fastener Length: 2" - 3-1/2"; Fastener Diameter: Range .113 - .131. Included: Battery, Safety Glasses, Rapid Charger, and Contractor Bag.
CONNECTOR NAILER METAL 20V
CONNECTOR NAILER METAL 20V
Our Price: $479.78
Brushless motor and engine design provides the power to sink both 1-1/2" and 2-1/2" fasteners. Tip probe guide for precision placement of fasteners. Quick load magazine holds up to 29 nails. Sequential operating mode allows for precision placement. Weighs only 8 lbs. Includes: Nailer, charger, battery and carrying case.
   
 
1