Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > PNEUMATIC NAILERS > PNEUMATIC CAP STAPLERS & NAILE
Sort By:
1
Dewalt DW4706 Backing Diamond Wheel Flange Dewalt DW4900 Spindle Adapter WRENCH SPANNER DELUXE-SAND PAD
Adapters for use on the DW402 grinder, 5/8"-11 shaft grinders to mount type 1 cutoff wheels. For Makita and other 4'' angle grinders with M10 x 1.25 spindles. Converts M10 x 1.25 spindle to 5/8''-11. Maximum rpm: 20,000. Forney Industries Spanner Wrench, Adjustable, For Sanding Pads, Grinding Wheels and Cut-Off Wheels
SPINDLE NUT REPLACMENT 5/8-11 Makita 782401-1 Lock Nut Wrench BACKPLATE TYPE27 MOUNTS 7INCH
5/8" -11 replacement spindle nut for Forney 72321, 72322 and 72323 backing pads for sanding discs and buffing bonnets. Maximum rpm: 20, 000. For use with Makita 4" sander/grinders. Back plate for type 27 depressed center wheels mounts 7" (177.8mm) and larger type 27 depressed center wheels, without arbor, to 5/8"-11 angle grinder shaft.
Makita 193465-4 Lock Nut Bosch 2610906323 Dry Diamond Flange Kit Senco PC1195 Mini Hand Nailer
Use with 4-1/2", 5", 7" grinders, fits 9015A, 9005B, 9067L, 9069, 9524NB, 9527NB, 9527PB, 9528PB, 9557NB/PB, 9558NB/PB, 9564/CV, 9565/CV, GA7011C. For use with  Bosch grinder model Nos.1375A, 1347A, 1347AK, 1700A, 1701A, 1706AE, 1710A, 1711A, 1703AEVS. 7/8" shoulder. 5/8"-11 Thread - Carded Powerful enough to drive bulk nails into joist hangers, hurricane straps, fencing or decking. Fifty percent lighter than traditional palm nailers and is ideal for exceptionally tight spots. Specifications; Reg. Operating Pressure: 60-110 psi (4.-7.6 bar). Air Consumption: 2 - 4 scfm. Length: 2 3/4" (69.9 mm); Width: 2" (55.6 mm). Fastener Specifications: Drives 2" - 3-1/2", 6d to 16d Bulk Nails. Includes Wrench. Tool Oil Required. Aluminum Housing & Rear Exhaust.
Stanley PN50 Mini Impact Nailer Senco PC0781 Hand Nailer Stanley PN100K Air Impact Nailer Kit
Rubber grip designed to insulate and reduce vibration; 360 degree swivel air fitting for maximum accessibility. Front exhaust directs air away from users palm. Fastener Specifications: Drives Most Common Bulk Finish, Framing & Timber Nails. Fits in the palm of the hand, making it ideal for joust hangers, metal straps and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar). Height: 5.8"; Weight: 2.4 lb. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes Leather grip. Ideal for framing or remodeling; drives common bulk nails in confined areas and nails metal connectors or joist hangars. Magnetic nose with recessed nail slot holds nails stable for accurate fastener placement. Hardened steel nose . Specs: 70 to 100 PSI;  1/4" NPT; Height: 5-1/4"; Length: 4-1/8" ; Width: -1/2";  Weight: 2.9 lbs. Includes: Impact Nailer with Standard Nose; Finish Nail Nose; Large Bore Nose; Leather Comfort Glove; Nose Wrench; Hex Wrench; Tool Lubricant and Spare O-Rings.
Stinger 136010 Pneumatic Cap Stapler CAP STAPLER 18GA GLUE COLLATE FLOORING NAILER 2 IN 1
FLOORING NAILER 2 IN 1
Our Price: $252.52
For residential roofing and sidewall applications. Designed to secure felt, house wrap and thin foam. Selectable trigger for easy change between sequential and contact modes. Rear exhaust helps keep contaminates away from work. Uses wide 5/16" crown SL style staples that help prevent puncture to the Dewalt cap. Tool-free depth of drive adjustment for precise setting of fasteners. Oil-free design for low maintenance operation. Low nail lockout prevents firing. Belt/rafter hook included. Dry fire lockout. Tool weighs only 5.4 lbs. Operating pressure 70-120 psi. Collation type: glue. Drives 15.5 gauge staples and 16 gauge "L" Cleat nails from 1-1/2" to 2" length. Non-marring, interchangeable base plates for 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. Ergonomically designed with longer handle and comfortable rubber grip. Lower CFM requirements at 3.7 SCFM. Mallet actuated pneumatic driving action. Lightweight at only 10.85 lbs. Includes Mallet, oil, wrenches, 1/4" (6.4 mm) air fitting with dust cover.
Stanley SL1838BC Cap Stapler Kit Senco SHF200 RW Strip Floor Nailer Stanley N66BC-1 Lightweight Cap Nailer
Adjustable depth of drive with internal air filter, belt hook, selectable trigger operation converts from sequential to contact operation. Specs: 170 in/lbs driving power, magazine capacity is 160 staples, weighs 3.9 lbs. Uses: 18 ga, 5/16" crown, 1/2"-1-1/2" long staples. Includes: stapler, 1/4" swivel air fitting, 1,000 1" SL Staples, 1,000 Bostitch caps. Pneumatic mallet actuated hardwood flooring cleat nailer for installation of 1/2"-3/4" (12-19mm) hardwood and laminate flooring. Easy on the arm the pneumatic action requires a single strike to drive faster. Non-marring base that adjust between 1/2" and 3/4" flooring without the use of tools. Lightweight and well balanced. Safety trigger prevents accidental ejection of fasteners. Extra long ergonomic handle reduces the amount the operator has to bend over. Includes mallet, oil, wrenches and 1/4" air fitting. Tool-free 'Dial-A-Depth' adjustment sets nails to desired depths quickly and conveniently. Durable lightweight magnesium. Quick-load magazine. Tool-free adjustable exhaust. Specs: Weight: 5.7 lbs; Driving Power: 500 Inch lbs at 100 PSI; Operating Pressure: 70 - 120 PSI; Thread Fitting Type: 1/4" NPT; Magazine Capacity: 300 Nails & 100 Caps; Fastener Specifications: 1 1/4"-2 1/2" Wire Weld and Plastic Inserted Coil Nails (.080" - .092")
Stinger 136250 Pneumatic Cap Nailer Stanley MIIIFN Angled Hardwood Flooring Cleat Nailer
For use where nails are required. It shoots plastic caps for residential roofing and sidewall applications. Key features includes tool-free depth adjustment and an integrated switch for sequential/bumpfire capability. For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5"; Length: 17.25"; Width: 3.13"; Weight: 11.2 lbs; Driving Power: 420 Inch Lbs; Operating Pressure: 70-90 PSI; Thread Fitting Type: 3/8" NPT; Magazine Capacity: 110 Cleats. Fastener Specifications: Drives 1-1/2 to 2" Cleat Nails. Includes: Nailer; Graphite Mallet; Pre-Finished Flooring Adapter Foot; Base Plates: 1/2" & 3/4".
   
 
1