Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > PNEUMATIC NAILERS > PNEUMATIC STAPLERS
Choose a sub category:
PNEUMATIC NAILERS COMPRESSORS & ACCESSORIES
Sort By:
1
ADAPTER REDUCING BUSHING 3/4IN ADAPTER REDUCING BUSHING 1INCH CUTTERS REPL GRIND DRESSER WHL
Reducing bushing adapters for 3/4" thick bench grinding wheels. Arbor reducing bushings. Reduces arbor to multi-sizes: 1/2" (12.7mm) or 5/8" (15.88mm). Reducing bushing adapters for 1" thick bench grinding wheels. Arbor reducing bushings. Reduces arbor to multi-sizes: 1/2" (12.7mm), 5/8" (15.88mm) or 3/4" (19.05mm). Replacement cutters for bench grinding wheel dresser.  Heat treated carbon steel. 10-1/2".
Makita 7430096 Backing Pad WHEEL BENCH GRINDING MED 6IN  WHEEL BENCH GRNDG FN 6IN
Made of durable rubber and used as a back support for resin fiber discs on Grinders;  held in place by a lock nut. Can be cleaned with soap and water or a mild solvent. For use with bench grinders. 3/4" blade thickness, maximum RPM 4,100 is designed for cutting metal. For use with bench grinders. 3/4" blade thickness, maximum RPM 4,100 is designed for cutting metal.
BACKING PAD FIBER KIT 4X5/8IN BACKING PAD FIBER 4-1/2X5/8IN Norton 88245 Type 1 Straight Grinding Wheel
Converts your angle grinder into a sander.  Designed for use in angle grinders and is ideal for metal applications. The grinder/sander conversion kit includes (1) Back up pad, (1) M- 1.25 Locknut, (1) M- 1.50 Locknut and (2) 50 grit (coarse) fiber discs. Improves performance, extends sanding life and increases productivity. 5/8" Arbor. Grinder/sander conversion kit converts your angle grinder into a sander. Ideal for metal applications. Offers improved performance, extends sanding life and increases productivity. This kit includes (1) back-up pad, (1) 5/8" locknut and (2) 50 grit (coarse) fiber discs. 5/8" arbor. For use on all bench and pedestal mounted grinders for offhand deburring, sharpening, shaping and limited stock removal on all types of material. Telescoping plastic bushings allow the wheel to fit most standard arbor sizes. 3/4" blade thickness.
Dewalt DW4945 Backing Pad SandBlaster 9675 Quick Change Grinder Adapter WHEEL GRINDING 60GRT 6X3/4X1IN
For use with handheld  grinders. Steel reinforced with locking nut. 12,000 max rpm. Quick change hub adapter for right angle grinder, fits 4.5" and 5" right angle grinders with a 5/8"-11 thread per inch external shaft size, attaches easily, spin on/off, changes discs quickly, attach a variety of versatile grinding, sanding, and finishing discs without the need for wrenches, provides support while also allowing some flexibility to finish contoured or curved surfaces. Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder.
WHEEL GRINDING 36GRT 6X3/4X1IN WHEEL GRINDING 80GRT 6X3/4X1IN PAD BACKNG SANDNG 4.5X5/8-11IN
Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder. Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder. Backing pad with spindle nut for sanding discs and buffing bonnets. Heavy duty and flexible. Maximum rpm: 10,000
Norton 88240 Type 1 Straight Grinding Wheel Norton 88250 Type 1 Straight Grinding Wheel Norton 88210 Type 1 Straight Grinding Wheel
For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.
BACKING PAD FIBER KIT 7X5/8IN Norton 88235 Type 1 Straight Grinding Wheel PAD BACKING SANDING 7X5/8-11IN
Premium grinder/sander conversion kit converts your angle grinder into a sander. Diablo's backing pads and fiber offer improved performance, extends sanding life and increases productivity. Designed for use in angle grinders and is ideal for metal applications. Kit includes (1) back-up pad, (1) 5/8- 11 locknut and (2) 50 grit (coarse) fiber discs. Fits all 7" grinders with 5/8" - 11 spindles. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. Backing pad with spindle nut for sanding discs and buffing bonnets. Heavy duty and flexible. Maximum rpm: 10,000
Norton 88255 Type 1 Straight Grinding Wheel Norton 88260 Type 1 Straight Grinding Wheel DRESSER GRINDING WHEEL 10.5IN
For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. Dresser for bench grinding wheel. Heat treated carbon steel cutters. To re-true and clean the surface of an abrasive wheel. 10-1/2" (266.7mm).
Makita 1929782 Backing Pad Norton 88280 Type 1 Straight Grinding Wheel Norton 88285 Type 1 Straight Grinding Wheel
For use with 7" and 9" handheld angle grinders or sanders. Fits Makita angle grinder Nos.9067L and 9069; and angle sander No.9060L. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.
Norton 88286 Type 1 Straight Grinding Wheel Surebonder 9600 Pneumatic Stapler Arrow PT50 Pneumatic Staple Gun
For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. Specs: 100 staples capacity, 60 to 100 PSI,  H-8.9" x L-8.1" x W-2.2". Tool Weight: 2.9 lbs. Fastener Specifications: Drives 1/4" thru 9/16" Surebonder No.4 Heavy-Duty Staples (same as Arrow T50), 1/4", 5/16", 3/8", 1/2", 9/16" Staple Lengths.  Includes: High-Impact Carrying Case. Lightweight, compact design provides versatility and the precision necessary for both construction and home repair projects; features a sturdy blow-molded case, replacement oil and 2 hex wrenches for easy tool maintenance and storage; adjustable exhaust cover directs air away from user; easy-load magazine for quick loading; bump fire capability for fast firing; maximum pressure: 120psi.
Hitachi N3804AB3 Lightweight Air Finish Stapler FINISH STAPLER 18GA 1/4CROWN  Senco 1W0021N Pneumatic Stapler Kit
New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 degree adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Specs: Weight: 2.2lbs.; Size: 10-11/32" L x 9-1/8" H x 2-3/8W; Air pressure (PSI): 70-120; Magazine Type: Steel; Nail Loading Type: Top; Firing Mode: Single-Contact-Selector; No Mar Tip: Yes; Depth Adjustment: Yes; Adjustable Exhaust Port: Yes; Jam Clearing: Yes; Oil-Free: No; Rubber Grip: Yes. Fastener Specifications: Nail Range- 1/2" - 1-1/2"; Staple Capacity: 125. Includes: Safety Glasses; Case; No-Mar Tipx2. Long life maintenance-free motor helps to keep from staining the work surface. Selectable trigger sequential or contact actuation. Top load magazine. Rear exhaust to keep contaminates away from work. Tool-free depth-of-drive adjustment from proper setting of staples. Low staple lockout alerts when to reload. 70-120 psi. Tool weighs only 3 lbs. Selectable trigger controls. Magnesium body with oil free motor eliminates oil carry over onto the work surface, metal cylinder for increased durability. Rotatable rear exhaust and belt hook. Specs: Height: 9.5"; Length: 10.25"; Weight: 2.6 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Contact or Sequential Actuation. Fastener Specifications: 18 Gauge, 1/4" Crown, accepts 3/8"-1-1/2" length staples. Includes: Case, swivel air plug and wrench.
Stanley SX1838K Finish Stapler Kit FramePro 4Z0101N Pneumatic Strip Framing Nailer JoistPro 7L0001N Connector Nailer
Lightweight magnesium, low nail lockout, 'Dial-A-Depth' control, and reversible belt hook with integrated pencil sharpener. Oil-free operation requires no regular maintenance. Selectable trigger system converts from sequential to contact operation. Swivel air fitting with internal filter. Ultra-quiet rear exhaust with muffler. Specs: Magazine Capacity 100 Staples; Weight: 3 lbs; Driving Power: 160 in-lbs. Fastener Specifications: 18GA SX Narrow Crown Finish Staples (1/2" to 1-1/2"). Includes: Finish Stapler; 1/4" Swivel Fitting; (1,000) 1" Finish Staples; Carrying Case; Hex Wrench & Belt Hook. FramePro 3235XP framing nailer. Well balanced, ergonomic design. Highly efficient internal design, means less wear and tear on the compressor. TrueDrive magazine reduces jams and mis-feeds. Aggressive toenail safety. Fits easily between studs and joists. Retractable rafter hanger. Contract or sequential trigger actuation. Fastener capacity: 83, shank diameter: .113" - .148", range: 2" - 3-1/4", collation: 34 degrees angled tape strip. Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive through engineered lumber. Adjustable rafter hanger.  Fastener capacity: 30, Shanks: .131"-.148", Range: 1-1/2", Collation: 34 degree paper tape strip. Tool-free adjustable exhaust deflector.
Stanley LHF2025K Flooring Stapler Senco 3L0003N Construction Stapler Stanley F21PL2 Angled Framing Nailer
High visibility tongue engagement for faster installation and non-marring profile tips to prevent floor scratches. Adjustable knobs allow for tool-free adjustment from 1/4"-1/2" flooring, oil free operation requires no regular maintenance, swivel air fitting with internal filter improves maneuverability and ultra quiet rear exhaust directs air away from the user. Specs: capacity 125, 122 in-lbs. driving power , fastener info Crown Length 1", gauge 20, weighs 2.9 lbs. Aluminum housing. Over-mold comfort grip. Easy Clear Jam Clearing with 360 degree adjustable exhaust. Tool oil required. Specs: Height: 10 3/4"; Length: 15"; Weight: 4.6 lb. (2.09 kg). Mode of Operation: Contact Actuation. Fastener Specifications: Drives 16 GA, 7/16" Crown Staples from 1" to 2" Length. Push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability; 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds. Recommended tool for use with HurriQuake disaster-resistant nails. Specs: Power-to-Weight Ration 1,050 in/lbs; Weight 8.1 lbs, 3.67 kilos; Driving Power 1050 inch/lbs.; Thread Size 1/4" NPT. Fastener Specifications: Fastener Gauge; .113" -.162" diameter; Fastener Range; 2" - 3-1/2"  21 Degree Plastic Collated Framing Nails; Magazine Capacity: 60 Nails.
Hitachi NR90AEPR Lightweight Framing Nailer Stanley F33PT Angled Framing Nailer Stanley F21PL Angled Framing Nailer
Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire. Nails with a simple flip of a switch for tool-less transitions. Specs: Air Inlet: 3/8"; Operating Pressure: 70-120 psi; Air Consumption at 100 PSI.09 scfm; Depth AdjustmentTool-less; Actuation Selective; Jam Clearing Open Nose; LxWxH 20.8"x 4.9",x 7.5"; Magazine Loading: Rear. Weight: 7-1/2 Lbs. Fastener Specifications: Accepts 2" to 3-1/2" Plastic Collated Framing Nails; Fastener Diameter Range; .113"-.148"; Magazine Angle: 21 Degrees; Nail Capacity: 64 Nails. Included: Safety Glasses.. Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications. Patented push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Height 14"; Length 18"; Weight 7.9 lbs; Driving Power: 1050 Inch Lbs.; Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Fastener Gauge Framing: .113"-.162" Diameter; Metal Connector Nails: .131"-.162" Diameter; Fastener Range Framing: 2" to 3 1/2" 33 degree Paper Collated Stick Framing Nails; MCN: 1 1/2" to 2 1/2" Metal Connector Nails; Magazine Capacity: 80 Nails. Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications. Patented push button adjustable depth guide sets nails to desired depths. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT.; Weight 8.1 lbs, 3.67 kilos; Driving Power 1050 Inch Lbs. Fastener Range Framing: 2" to 3 1/2" 21 degree Plastic Collated Stick Framing Nails; Fastener Gauge Framing: .113"-.162" Diameter;  Metal Connector Nails: 1 1/2" to 2 1/2"; Metal Connector Nails: .131"-.162" Diameter; Magazine Capacity 60 Nails.
Hitachi NR90ADPR Lightweight Framing Nailer Senco 820103N Wire Stapler Bostitch Strapshot Metal Connector Nailer
Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Specs: Weight: 7 lbs.; Air Inlet:3/8"; Operating Pressure 70-120 PSI; Air Consumption at 100 PSI.09 scfm; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing; Open Nose: 18.2L" x 4.9W" x 12.7H". Fastener Specifications: Fastener Type: Paper Tape Collation; Magazine Capacity: (.131)86-94 Nails; Magazine Loading: Rear; Magazine Angle: 35 Degrees; Fastener Length: Capacity 2in. - 3-1/2in.; Fastener Diameter: Range.113 - .148. Included: Safety Glasses. Lightweight, ergonomic design with a comfort-grip handle. Adjustable depth-of-drive and aluminum sleeve and piston. No-mar pad. Oil-free design means easier maintenance and no lubrication. Muffler ensures quiet operation Specs: 70 to 120 PSIG; 9" H x 12" L. Tool weight: 2.7 lb.; Staple Capacity: 145 to 168. Fastener Specifications: Drives 18 GA, 1/4" & 3/8" Crown, 3/8" to 1-1/2", Senco L Series Staples. Compact design fits between 12" OC joists. Low nail lockout prevents dry fires. Exclusive safety system prevents misfires. Exposed nail tip design fires in the hole for faster, more precise nailing. Specs: Height 10-1/2"; Weight: 4.6 lbs.; Driving Power: 450 Inch Lbs. Magazine Capacity 29 Nails; Operating Pressure: 80-120 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Drives 1-1/2" paper tape collated metal connector nails (.131" - .148" diameter).
Stanley F28WW Angled Framing Nailer Senco 7B0001N Heavy Wire Pneumatic Construction Stapler FRAMING NAILER 21DEG PLSTIC RH
Push button adjustable depth guide sets nail to desired depths quickly and conveniently. Notched 16" layout indicator on magazine helps achieve correct distance between studs in a matter of seconds. Lightweight magnesium design for added durability. Adjustable rafter hook allows users to hang tool on rafters and joists. Specs: Height 14-1/4"; Length 20"; Weight 7.6 lbs.; Driving Power 1050 Inch Lbs; Operating Pressure 80-120 PSI; Thread Fitting Type 1/4" NPT. Fastener Specifications: Fastener Gauge .113 - .131; Fastener Range 2" to 3 1/2" 28 degree Wire Collated Stick Framing Nails; Magazine Capacity: 100 Nails 2" 7/16" crown. Innovative magazine removal mechanism maintains a clean, narrow line of sight for precise staple placement. Well balanced, ergonomic design for all day use. 1" lip length allows access into tight corners. Durable all-metal magazine construction. Precision machined drive tank ensures accurate, jam free staple drives. Adjustable depth of drive and belt. Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Adjustable rafter hook. Lightweight at only 8 lbs. with enhanced ergonomics and balance for comfort and control. Tool free features depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Fastener diameter range .113 to .148". Magazine capacity of 50 nails. Operating pressure 70-120 psi. Overmold grip.
FRAMING NAILER 30DEG PAPER    FRAMING NAILER 28 DEG WIRE WLD NAILER FRAMING L/P PLST COLATD
FRAMING NAILER 30DEG PAPER
Our Price: $228.46
30 degree paper tape collated framing nailer. Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lbs with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 75 nails. Operating pressure 70-120 psi. Overmold grip. 28 degree wire weld framing nailer. Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lbs with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 100 nails. Operating pressure 70-120 psi. Low profile design with enhanced ergonomics and balance for comfort and control. Tool free features depth of drive adjustment, selectable trigger for single drive or multi drive actuation mode, adjustable rafter hook. Magazine capacity: 50. Operating pressure: 70-120. Air inlet size: .25". Fastener length range: 2" to 3-1/4". Weighs only 8 lbs.
NAILER FRMG L/P PAPR TP COLATD NAILER FRAMING LW/PRFL WR WELD CONNECTOR NAILER METAL 1-1/2
Powerful enough to drive into engineered lumber. Tool free features depth of drive adjustment, selectable trigger for single drive or multi drive actuation mode, adjustable rafter hook. Magazine capacity: 75. Fastener length range: 2" to 3-1/4". Length: 19.7" x 12.75" Height. Operating pressure: 70-120. Air inlet size: .25". Weighs only 8.1 lbs. Low profile design with enhanced ergonomics and balance for comfort and control. Powerful enough to drive into engineered lumber. Industrial grade design for high volume framing and sheathing applications. Tool free features: depth of drive adjustment, selectable trigger for single driver or multi drive actuation modes and adjustable rafter hook. Fastener diameter range: .113 to .131". Fastener length: 2 to 3-1/4". Top load magazine. Lightweight at only 7.9 pounds. At 10.5" (26.7 cm) tall, fits conveniently inside 12" (30.5 cm) on-center framing and other tight areas. Fastener placement made easy with exposed nail tip. Tool-free adjustable rafter hook for convenience. Low nail lockout helps prevent jamming. In-line magazine for a well balanced tool. Slip on grip. 29.0 magazine capacity. Belt/rafter hook included. Adjustable exhaust. Operating pressure 70-120 psi. Lightweight tool at only 4.6 lbs.
Stanley MFN-201 Manual Flooring Nailer FLOORING NAILER 2 IN 1        Hitachi N5024A2 Lightweight Pneumatic Stapler
FLOORING NAILER 2 IN 1
Our Price: $252.52
For installing 1/2", 5/8" and 3/4" hardwood floors. Selectable drive mode to choose between single or multi-blow options. Graphite mallet with ergonomic comfort grip. Rubber bumpers protect pre-finished floors against marring. Specs: Weight 8.6 lbs; Magazine Capacity: 120 Cleat Nails; Fastener Specifications: Drives 1-1/2" to 2" Bostitch 'L' Shaped Hardwood Flooring Cleats. Includes: Flooring Nailer; Mallet; Flooring Adaptors (for 1/2" & 5/8" flooring); Flooring Hex Wrenches & Contractor Carrying Case Drives 15.5 gauge staples and 16 gauge "L" Cleat nails from 1-1/2" to 2" length. Non-marring, interchangeable base plates for 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. Ergonomically designed with longer handle and comfortable rubber grip. Lower CFM requirements at 3.7 SCFM. Mallet actuated pneumatic driving action. Lightweight at only 10.85 lbs. Includes Mallet, oil, wrenches, 1/4" (6.4 mm) air fitting with dust cover. Quick clear jam release, tool-less depth adjustment. Rubber grip for comfortable handling. Plastic magazine with stainless plate. 14-3/8" L x 9-13/16" H x 3-11/32" W. Operating pressure 70 - 120 psi. Air inlet: 3/8" NPT Thread. Magazine capacity 150 staples. Adhesive collation. 16 gauge wire, 1" crown, 1"- 2" length. Includes safety glasses and M5 Hex bar wrench.
Hitachi N5008AC2 Construction Stapler JoistPro 6K0001N Connector Nailer Senco 7C0001N Heavy Wire Pneumatic Construction Stapler
Quick-clear jam release. Cylinder valve firing mechanism provides quick response and rapid driving. Depth of drive adjustment. Stapler diameter is16-gauge, straight magazine angle. 1/4" air Inlet. Operating pressure 70?120 PSI. Weight: 4.4 lb. Stapler capacity: 157. Drives 16 gauge, 7/16" crown staples from 1" to 2" length. Includes eye protector and Allen wrench for M5 screw. Nosepiece probe locates metal connector holes providing accurate nail placement. Lightweight and well balanced. Dry-fire lockout. Powerful enough to drive 1-1/2" - 2-1/2" through engineered lumber. Adjustable rafter hanger. Tool-free adjustable exhaust deflector. 2" 7/16" crown, heavy wire stapler. Innovative magazine removal mechanism maintains a clean, narrow line of sight for precise staple placement. Well balanced, ergonomic design for all day use. 1" lip length allows access into tight corners. Durable all metal magazine construction. Precision machined drive track ensures accurate, jam free staple drives. Adjustable depth of drive and belt hook.
Senco SHF200 RW Strip Floor Nailer NAILER FRMG PLST STRP 3-1/4IN FramePro 701XP 2H0133N Framing Nailer
Pneumatic mallet actuated hardwood flooring cleat nailer for installation of 1/2"-3/4" (12-19mm) hardwood and laminate flooring. Easy on the arm the pneumatic action requires a single strike to drive faster. Non-marring base that adjust between 1/2" and 3/4" flooring without the use of tools. Lightweight and well balanced. Safety trigger prevents accidental ejection of fasteners. Extra long ergonomic handle reduces the amount the operator has to bend over. Includes mallet, oil, wrenches and 1/4" air fitting. Selective Actuation (Sequential/Contact). Open nose for ease of clearing jams. Rafter hook and 2-piece magazine included. Tool-less depth adjustment for easy depth of drive setting. Rubber grip for comfortable handling. Hardened claw tip resists wear on the nose and minimizes slippage. Fastener Specifications: Full round-head nails, 21 degree plastic strip collation, Diameter 0.113" - 0.131", Length 2" - 3-1/4".  Operating Air Pressure:  70-120 PSI. Nail Capacity: of 64 nails. Top loading. Dimensions: 21-13/16" x 4-1/4" x 13-3/8". Includes: Safety Glasses. Improved internal and external features for improved durability and comfort. These compact framers are easy to handle, and easy on the arm. The 31-34 degree short, in-line magazine provides excellent maneuverability and line of sight. Drive a wide range of fasteners to handle virtually any job. Specs: Height: 13-1/4"; Length: 15.13"; Weight: 8.0 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: Nail Capacity: 56-80, (Depending on Gauge); Drives 2"-3-1/2" Smooth Shank Nails ('Sencote' or plain); 2"-3" Ring Shank Nails. Shank Diameters Include: .113, .120, .131 and .148.
NAILER FRMG PLST STRP 3-1/4IN NAILER FRMG PAPER CLTD 3-1/4IN Hitachi Strap-Tite Pneumatic Fastening Nailer
Selective Actuation (Sequential/Contact). Open nose for ease of clearing jams. Rafter hook and 2-piece magazine included. Tool-less depth adjustment for easy depth of drive setting. Rubber grip for comfortable handling. Hardened claw tip resists wear on the nose and minimizes slippage. Fastener Specifications: Full round-head nails, 21 degree plastic strip collation, Diameter 0.113" - 0.131", Length 2" - 3-1/4".  Operating Air Pressure:  70-120 PSI. Nail Capacity: of 64 nails. Top loading. Dimensions: 21-13/16" x 4-1/4" x 13-3/8". Includes: Safety Glasses. Selective Actuation (Sequential/Contact). Cylinder valve drive system for rapid response and increased durability. Open nose for ease of clearing jams. Rafter hook and 2-piece magazine included. Tool-less depth adjustment for easy depth of drive setting. Rubber grip for comfortable handling. Hardened claw tip resists wear on the nose and minimizes slippage. Fastener Specifications: Full clipped-head nails, 30 degree paper strip collation, Diameter 0.113" - 0.131", Length 2" - 3-1/4".  Operating Air Pressure: 70-120 PSI. Nail Capacity: of 86-94 nails. Rear loading. Dimensions: 18-1/8"L x 4-1/4"W x 14-3/16H". Includes: Safety Glasses. Narrow design allows for use in tight spaces. Overhanging nail tip accurately locates pre-punched holes. Sequential firing mechanism ensures precision nail placement. 360 degree tool-less adjustable exhaust deflector, safety glasses, 3 wrenches. Rear loading magazine has a collation angle of 36 degrees and can hold 22 nails. Operating air pressure of 80-120 PSI. 3/8" Air Inlet. Dimensions 11-3/4" x 3-3/8" x 13-3/16". Fastener Specifications: 1-1/2" to 2-1/2" x 0.131" - 0.162".
LATHING STAPLER 16GA 1IN      Stanley MIIIFS Flooring Stapler Kit Stanley MIIIFN Angled Hardwood Flooring Cleat Nailer
LATHING STAPLER 16GA 1IN
Our Price: $383.07
Jam-free magazine to minimize downtime. Overmolded rubber grip for comfort and control. Adjustable depth guide for precise setting of fasteners. Power control valve adjusts power by up to 30 percent for precise setting of fasteners. Compact design for tight jobsite applications. 1" crown width; 1" fast crown length. 1/2" - 2" staple length. Magazine capacity: 160 staples. Weighs only 4.5 lbs. Includes a manual. Solid and engineered hardwood flooring installation. Durable aluminum housing. High-speed, mallet actuated pneumatic operation increases productivity over manual methods. Extra-wide composite base plates for added stability. Long reach handle for improved comfort and control. Specs: Height 14.88'; Length: 17.25"; Width: 3.13"; Weight: 11.2 lbs.; Driving Power: 420 Inch Lbs.; Operating Pressure: 70 - 90 PSI; Thread Fitting Type: 3/8" NPT; Magazine Capacity: 92 Staples. Fastener Specifications:  1-1/2" to 2" 15-1/2GA Staples. Includes: Stapler; Graphite Mallet; Pre-Finished Flooring Adapter Foot & 1/2" and 3/4" Base Plates. For solid and engineered hardwood flooring. High-speed mallet actuated pneumatic operation. Extra-wide composite base plate for added stability. Long reach handle for improved comfort and control. Specs: Height: 11.5"; Length: 17.25"; Width: 3.13"; Weight: 11.2 lbs; Driving Power: 420 Inch Lbs; Operating Pressure: 70-90 PSI; Thread Fitting Type: 3/8" NPT; Magazine Capacity: 110 Cleats. Fastener Specifications: Drives 1-1/2 to 2" Cleat Nails. Includes: Nailer; Graphite Mallet; Pre-Finished Flooring Adapter Foot; Base Plates: 1/2" & 3/4".
   
 
1