|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicone carbide grain for material removal. Ideal for cutting masonry. Ideal for use with Angle grinder. Provides the necessary performance and durability to complete your masonry project.
|
Silicone carbide grain for material removal. Ideal for cutting masonry. Ideal for use with Angle grinder. Provides the necessary performance and durability to complete your masonry project.
|
Premium masonry cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend to cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal use when working in hard to reach areas. For use on masonry applications like concrete brick, cinder block, cement and paver stone. 1/8" thickness.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For cutting concrete and masonry. For use with angle grinders. Use of 100 percent virgin grain for enhanced removal and long life. Proprietary material mix to ensure premium performance.
|
For traditional cut-off applications. Thin design for cleaning, slotting and cutting concrete brick, cinder block, cement and patio stones. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. 1/16" blade thickness.
|
Premium masonry cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend to cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal use when working in hard to reach areas. For use on masonry applications like concrete brick, cinder block, cement and paver stone. 1/8" thickness.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For traditional cut-off applications. Thin design for cleaning, slotting and cutting concrete brick, cinder block, cement and patio stones. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. 1/16" blade thickness.
|
Thin .045" wheel design for fast burr free cutting. Softer aluminum oxide formulation provides faster cutting.
|
Made from hardened and tempered steel. Maximum rpm 5,000. Applications: cutting, shaping or forming on plastic or metal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from hardened and tempered steel. Maximum rpm 5,000. Applications: cutting, shaping or forming on wood, plastic or rubber. 1/4" shaft.
|
Made from hardened and tempered steel. Maximum rpm 5,000. Applications: cutting, shaping or forming on wood, plastic or rubber. 1/4" shaft.
|
Made from hardened and tempered steel. Maximum rpm 5,000. Applications: cutting, shaping or forming on plastic or metal. 1/4" shaft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4-1/2" (114.3mm) x 1/16" (1.59mm) cutting wheel with 7/8" (22.22mm) arbor. Silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on right angle grinders only. Wheel size: 4-1/2"; Thickness: 1/16"; Arbor 7/8". Maximum rpm: 13,580; Tool type: right angle grinder.
|
Aluminum oxide resin-bonded to backing, pre-punched for dust extraction. Fits Bosch No.1294VSK corner/detail sander. Includes (2) each: 60, 120 and 240 grit triangles.
|
For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
|
For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
|
For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse sanders.
|
Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse sanders.
|
Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse sanders.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse sanders.
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. Recommended use leveling and heavy stock removal. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders.
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. For light stock removal and final sanding preparation before paint. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. Recommended use removing minor imperfections and initial sanding between paint/stain coats. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders.
|
Made of alloy steel that is hardened and tempered for increased durability and long life. Precision cutting edges will not clog or load up. For rasping or filing wood.
|
Made of alloy steel that is hardened and tempered for increased durability and long life. Precision cutting edges will not clog or load up. For rasping or filing wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of alloy steel that is hardened and tempered for increased durability and long life. Precision cutting edges will not clog or load up. For rasping or filing wood.
|
Special alloy steel hardened and tempered for long life. Precision cutting edges will not clog or load up.
|
Special alloy steel hardened and tempered for long life. Precision cutting edges will not clog or load up.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum oxide for fast metal removal. Fits all die grinder and drills.
|
Aluminum oxide for fast metal removal. Fits all die grinder and drills.
|
Made of alloy steel that is hardened and tempered for increased durability and long life. Precision cutting edges will not clog or load up. For rasping or filing wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special alloy steel hardened and tempered for long life. Precision cutting edges will not clog or load up.
|
Aluminum oxide for fast metal removal. Fits all die grinder and drills.
|
Aluminum oxide for fast metal removal. Fits all die grinder and drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Special alloy steel hardened and tempered for long life. Precision cutting edges will not clog or load up.
|
Special alloy steel hardened and tempered for long life. Precision cutting edges will not clog or load up. Fits all drills.
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
Shank mounted points are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35 mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
Shank mounted grinding wheels are made from durable, high-grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals or other hard surfaces. For use with 1/4" (6.35mm) chuck high-speed drills. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Max rpm: 3,450
|
Abrasive impregnated nylon bristle brushes. Last longer and safer to use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Abrasive impregnated nylon bristle brushes. Last longer and safer to use.
|
Abrasive impregnated nylon bristle brushes. Last longer and safer to use.
|
Multi-grade detail sanding fingertip with hook and lock backing. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-bond, a specialized high strength resin provides superior grit-to-backing bond for extreme durability. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, Mouse, MegaMouse and Cyclone Craftsman.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cylindrical mounted rotary file with rounded end and 1/4" shank. Rugged tool made from special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Bulb shape mounted rotary file and 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Conical shape mounted rotary file with rounded end and 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ball shape mounted rotary file with 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Cylindrical mounted rotary file with rounded end, flat top and 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Conical shape mounted rotary file with rounded end and 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Football shape mounted rotary file with 1/4" shank. Tough, rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Cylindrical shape mounted rotary file with flat top and 1/4" shank. Rugged tool made from a special tempered steel. Specially hardened cutting edges and can be used on steel, bronze, fiberglass, plastic and many other materials. Maximum rpm: 2,500.
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics.
|
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics.
|
For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.
|
For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.
|
For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal sandpaper has perforated areas that can be torn or cut to fit various sander pads. Assorted pack includes: (1)80grit, (2)120grit, and (2) 220grit. Fits: Mega Mouse, Mouse, Corner Cat and Sandstorm products.
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter.
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter.
|
Industrial durability, for use with oscillating tools. Universal dust extraction. Mesh sandpaper is washable and cleaning the mesh minimizes clogging for a longer life. Length: 3-3/4".
|
Universal sandpaper has perforated areas that can be torn or cut to fit various sander pads. Assorted pack includes: (1)80grit, (2)120grit, and (2) 220grit. Fits: Mega Mouse, Mouse, Corner Cat and Sandstorm products.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas.
|
Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas.
|
Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
|
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximizes life of drill bits. Resharpens cutting tools, gardening tools and others. Applications: Grind Drill Bits, Marble, Metals, Plastic, & Tile. Use With: All Drills of 800 RPM & higher.
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" shank mounted tungsten carbide burrs are double cut for fine work. For use with high-speed die grinders. Designed for use on ferrous metals, plastic, fiberglass and other machinable materials. Great for deburring, sculpting and removing material in hard-to-reach areas. Max rpm 70,000.
|
Siphon feed type. Required pressure of 50-75 psi. Minimum 3.8" hose diameter.
|
Display box includes: ( 4) Each: 1" x 1/4", 1-1/2" x 1", 2" x 1/4", 2" x 1/2" and 3 each of: 2-1/2" x 1/4", 3" x 1/2", 2-1/2" x 1/2".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Box Nail, 16D, 3-1/2 in Length, 11/32 in Head, 10 ga, Smooth Shank, Steel, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
For cutting concrete and masonry. For use with angle grinders. Use of 100 percent virgin grain for enhanced removal and long life. Proprietary material mix to ensure premium performance.
|
Pro-Fit Box Nail, 12D, 3 in Length, 21/64 in Head, 10-1/2 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Box Nail, 8D, 2-1/2 in Length, 19/64 in Head, 11-1/2 ga, Smooth Shank, Steel, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 16D, 3-1/2 in Length, 11/32 in Head, 10 ga, Smooth Shank, Steel, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 10D, 3 in Length, 5/16 in Head, 10-1/2 ga, Smooth Shank, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin .045" wheel design for fast burr free cutting. Softer aluminum oxide formulation provides faster cutting.
|
Pro-Fit Box Nail, 6D, 2 in Length, 17/64 in Head, 12-1/2 ga, Smooth Shank, Steel, Bright, Use where Easy Driving and Less Splitting is Desired, Framing
|
Adjustable fluid, air and spray pattern controls; works in a variety of applications, from automotive refinishing to deck and fence work. Specs: required CFM 11, operating PSI 50. Included: (1) nozzle (size 1.4mm) and (1) 20 1/4 oz plastic paint cup.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12-1/2 gauge. 5/16 head. Used for nailing drywall to wood.
|
Pro-Fit Box Nail, 6D, 1-7/8 in Length, 1/4 in Head, 13-1/2 ga, Smooth Shank, Cement Coated, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 8D, 2-1/2 in Length, 19/64 in Head, 11-1/2 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Box Nail, 10D, 3 in Length, 5/16 in Head, 10-1/2 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 16D, 3-1/2 in Length, 11/32 in Head, 10 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 12D, 3-1/4 in Length, 5/16 in Head, 10-1/2 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit Box Nail, 7D, 2-1/4 in Length, 17/64 in Head, 12 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
Pro-Fit Box Nail, 6D, 2 in Length, 17/64 in Head, 12-1/2 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Use where Easy Driving and Less Splitting is Desired, Framing
|
Roll size is 8 inches wide x 50 yards length, used on professional drum machines for general sanding. Tough backing with fast cutting Resinite adhesive and sharp, durable synthetic mineral construction to save time, produce a better finish, cut faster and for long life. Easily cuts to size where drum resurfacing changes sheet length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Roll size is 8 inches wide x 50 yards length, used on professional drum machines for general sanding. Tough backing with fast cutting Resinite adhesive and sharp, durable synthetic mineral construction to save time, produce a better finish, cut faster and for long life. Easily cuts to size where drum resurfacing changes sheet length.
|
|
|
