Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER ABRASIVE ACCESSORIES > NYLON CUP BRUSHES
Sort By:
1
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 12-225 Air Line Plug
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug Tru-Flate 12-325 Air Line Plug
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-335 Air Line Plug Tru-Flate 12-135 Air Line Nipple Tru-Flate 21-123 Air Hose Fitting
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 21-535 Air Hose Bushing Tru-Flate 21-143 Air Hose Fitting
All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-505 Air Line Coupling Tru-Flate 21-242 Air Hose Fitting Tru-Flate 12-435 Air Line Plug
Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug Tru-Flate 21-222 Air Hose Fitting
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Gator 4072 Stick-On Resin Bonded Power Sanding Sheet Gator 4073 Stick-On Resin Bonded Power Sanding Sheet Gator 4074 Stick-On Resin Bonded Power Sanding Sheet
For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat and humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion. For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat and humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion. For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat and humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion.
Gator 4075 Stick-On Resin Bonded Power Sanding Sheet Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 12-605 Air Line Plug
For use on wood, metal, drywall, fiberglass and painted surfaces. Resin bonded to resist heat and humidity for longer life. These stick-on premium sheets are designed to fit any 1/4 sheet stick-on palm sander. The heavy duty resin sandpaper resists heat and humidity for longer life. The pressure sensitive holding system holds securely without slipping, tearing or wrinkling, allowing 100 percent use of the sander's motion. Plug 1/4". I/M x 3/8" MNPT. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Stanley TIRE-14F Tire Chuck 3M 9209 Palm Sanding Sheet
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. Plated steel; corrosion resistant steel for long life. Adhesive backing holds sheets firmly in place over the entire surface. Press on and peel off for simple use and quick changes. Resists snagging, gouging and tearing. Fit all palm sanders. Applications: finish sanding on wood, metal, painted & plastic surfaces.
3M 9210 Palm Sanding Sheet 3M 9211 Palm Sanding Sheet Tru-Flate 12-425 Air Line Plug
Adhesive backing holds sheets firmly in place over the entire surface. Press on and peel off for simple use and quick changes. Resists snagging, gouging and tearing. Fit all palm sanders. Applications: finish sanding on wood, metal, painted & plastic surfaces. Adhesive backing holds sheets firmly in place over the entire surface. Press on and peel off for simple use and quick changes. Resists snagging, gouging and tearing. Fit all palm sanders. Applications: finish sanding on wood, metal, painted & plastic surfaces. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 12-603 Air Line Plug Stanley 38M-14M Hex Reducer Nipple
All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Connects  FPT to FPT. Use thread sealant tape on all male threads for air tight connections.
Norton 7660705446 Stick and Sand Power Sanding Sheet Norton 7660705452 Stick and Sand Power Sanding Sheet Norton 7660705453 Stick and Sand Power Sanding Sheet
For sanding wood, metal, plastic and fiberglass, as well as removing old paint. For Palm Sanders. For sanding wood, metal, plastic and fiberglass, as well as removing old paint. For Palm Sanders. For sanding wood, metal, plastic and fiberglass, as well as removing old paint. For Palm Sanders.
Plews/Edelmann 12-611  Air Compressor Hose Fittings Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck
Plug 3/8". TF x 1/4" FNPT. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck PLUG 3/8IN TF X 3/8IN FNPT    Bosch SDTR000 Resin Bonded Assorted Sanding Sheet Kit
Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Aluminum oxide resin-bonded to backing, pre-punched for dust extraction. Fits Bosch No.1294VSK corner/detail sander. Includes (2) each: 60, 120 and 240 grit triangles.
SHEET 4-1/2 X 4-1/2IN PSA 40G SHEET 4-1/2 X 4-1/2IN PSA 60G SHEET 4-1/2 X 4-1/2IN PSA 100G
Diablo's premium sanding sheets with stick-fast backing include break-through innovations that improve performance, extend sanding life and increase productivity. These sanding sheets are designed for use in 1/4 sheet palm sanders and are ideal for all types of wood, metal and plastics. Diablo's premium sanding sheets with stick-fast backing include break-through innovations that improve performance, extend sanding life and increase productivity. These sanding sheets are designed for use in 1/4 sheet palm sanders and are ideal for all types of wood, metal and plastics. Diablo's premium sanding sheets with stick-fast backing include break-through innovations that improve performance, extend sanding life and increase productivity. These sanding sheets are designed for use in 1/4 sheet palm sanders and are ideal for all types of wood, metal and plastics.
SHEET 4-1/2 X 4-1/2IN PSA 150G Norton 7660706079 Stick and Sand Sanding Sheet Norton 7660706078 Stick and Sand Sanding Sheet
Diablo's premium sanding sheets with stick-fast backing include break-through innovations that improve performance, extend sanding life and increase productivity. These sanding sheets are designed for use in 1/4 sheet palm sanders and are ideal for all types of wood, metal and plastics. Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut rate. Consistent surface finish. Flexible, fibre reinforced backing. Non-pigmented, waterbased stearate (anti-clog) coating, open coat. No color dye in coating process, so no chance of color transfer to work surface. No finish contamination. Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut rate. Consistent surface finish. Flexible, fibre reinforced backing. Non-pigmented, waterbased stearate (anti-clog) coating, open coat. No color dye in coating process, so no chance of color transfer to work surface. No finish contamination.
Norton 7660706077 Stick and Sand Sanding Sheet Norton 7660705311 Stick and Sand Sanding Sheet Stanley AP-38F Auto Hose Adapter
Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut rate. Consistent surface finish. Flexible, fibre reinforced backing. Non-pigmented, waterbased stearate (anti-clog) coating, open coat. No color dye in coating process, so no chance of color transfer to work surface. No finish contamination. Ideal sanding performance for a premium surface finish on all surfaces and coatings. Will not clog, tear or transfer. Heat treated aluminum oxide abrasive, P-graded for longer life and faster cut rate. Consistent surface finish. Flexible, fibre reinforced backing. Non-pigmented, waterbased stearate (anti-clog) coating, open coat. No color dye in coating process, so no chance of color transfer to work surface. No finish contamination. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter Gator 3731 Resin Bonded Sanding Sheet
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
Gator 3730 Resin Bonded Sanding Sheet Gator 3733 Resin Bonded Sanding Sheet Gator 3732 Resin Bonded Sanding Sheet
For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right. For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right. For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right.
Tru-Flate 12-705 Air Line Plug Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male SandBlaster 9672 Power Sanding Sheet
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse  sanders.
SandBlaster 9673 Power Sanding Sheet SandBlaster 9670 Power Sanding Sheet SandBlaster 9671 Power Sanding Sheet
Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse  sanders. Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse  sanders. Cubitron mineral for high performance sanding. Heavy-duty backing resists tearing. Clog resistant construction. Hook & Loop fastening system ensures quick and easy disc changes. 4 pack, fits all 3-3/4" x 5-1/4" mouse  sanders.
SNDG SHT H/L 80G 4-3/16X6-3/4 SNDG SHT H/L 120G 4-3/16X6-3/5 SNDG SHT H/L 180G 4-3/16X6-3/6
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. Recommended use leveling and heavy stock removal. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. For light stock removal and final sanding preparation before paint. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond a specialized high strength resin provides superior grit-to-backing bond for extreme durability. Recommended use removing minor imperfections and initial sanding between paint/stain coats. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, MegaMouse and Cyclone Craftsman Sanders.
SPLICER HOSE REUSABLE 1/4IN   HOSE AIR END REUSABLE 1/4IN   Tru-Flate 17-355 Snap Clip On Air Line Chuck
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating.
Nyalox 541-775-3/4 End Brush Nyalox 541-787-3/4 End Brush Nyalox 541-781-3/4 End Brush
Abrasive impregnated nylon bristle brushes. Last longer and safer to use. Abrasive impregnated nylon bristle brushes. Last longer and safer to use. Abrasive impregnated nylon bristle brushes. Last longer and safer to use.
Tru-Flate 13-235 Industrial Air Line Coupler FINGERTIP HOOK/LCK 3X1-1/8IN  Tru-Flate 13-225 Air Line Coupler
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Multi-grade detail sanding fingertip with hook and lock backing. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog Shield high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-bond, a specialized high strength resin provides superior grit-to-backing bond for extreme durability. For use on wood, metal and plastic. Suitable for use with Black and Decker Sandstorm, Mouse, MegaMouse and Cyclone Craftsman. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
SPLICER HOSE REUSABLE 3/8IN   COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs.
Nyalox 541-771-3 Coarse Mounted Wheel Brush Nyalox 541-783-3 Fine Mounted Wheel Brush Nyalox 541-777-3 Medium Mounted Wheel Brush
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler
Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler Norton 3307212 Iron Shaped Sanding Sheet Norton 3307220 Iron Shaped Sanding Sheet
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets. For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets.
Norton 3307246 Iron Shaped Sanding Sheet Norton 3307261 Iron Shaped Sanding Sheet Tru-Flate 13-125 Air Line Coupler
For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets. For profiles, mouldings and contoured surfaces. For small, hard to reach areas that cannot be sanded with conventional power tools. Fits Black & Decker and Craftsman mouse sander. Iron shaped sheets. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Gator 3454 Abrasive Cleaning Stick Tru-Flate 13-135 Air Line Coupler SPLICER HOSE REUSABLE 1/2IN
Made from natural rubber. This cleaning stick will increase the life of your sanding belts and discs up to 8 times as long. Easy to use. Cleans your sander while it is running and saves you time and money. Improves the quality of the finish and helps to prevent burn marks. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 1/2IN   DETAIL CAT/MS 3-7/8X5-1/2 80G DETAIL CAT/MS 3-7/8X5-1/2 120G
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics. Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics.
DETAIL CAT/MS 3-7/8X5-1/2 220G Nyalox 541-786-21/2 Fine Wire Cup Brush Nyalox 541-774-21/2 Coarse Wire Cup Brush
Premium aluminum oxide blend, a superior quality formulation designed for fast material removal and long sanding life. Premium hook and lock backing enables repeated attachment and removal of discs for a consistent secure connection. Clog-Shield, high performance stearate coating that reduces pitch build-up and clogging for maximum productivity. Endura-Bond, a specialized high strength resin provides ideal grit-to-backing bond for extreme durability. For use on wood, metal and plastics. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter.
Nyalox 541-780-21/2 Medium Wire Cup Brush Tru-Flate 41-300 Hose Repair Kit Stanley Industrial IHKIT-14F Hose Coupler Kit
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. 1/4" Shank. Carded. 2-1/2" diameter. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life.
Stanley HREPAIR-38 Hose Splice Kit Bostitch BTFP72327 Ball Drain Valve Black & Decker 74-672 Sandpaper
Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose ; (1) barb x barb hose splicer for 3/8" hose &  (3) Clamps. Turn ball type drain valve. 1/4" NPT male thread. Universal sandpaper has perforated areas that can be torn or cut to fit various sander pads.  Assorted pack includes:  (1)80grit, (2)120grit, and (2) 220grit. Fits: Mega Mouse, Mouse, Corner Cat and Sandstorm products.
Tru-Flate 13-201 Coupler/Plug Set Tru-Flate 17-383 Dual Foot Direct Air Line Chuck MESH OSCILTNG TRIANGLE 220GRIT
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus. Industrial durability, for use with oscillating tools. Universal dust extraction. Mesh sandpaper is washable and cleaning the mesh minimizes clogging for a longer life. Length: 3-3/4".
HOSE AIR END REUSABLE 3/8IN   Tru-Flate 13-335 Air Line Coupler Tru-Flate 21-605 Barb Air Line Swivel
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Stanley TEE-14F Tee Fitting Black & Decker BDAMM220 Sandpaper
Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Universal sandpaper has perforated areas that can be torn or cut to fit various sander pads.  Assorted pack includes:  (1)80grit, (2)120grit, and (2) 220grit. Fits: Mega Mouse, Mouse, Corner Cat and Sandstorm products.
Black & Decker BDAMX-5 Reusable Assorted Sandpaper Kit Black & Decker BDAM180 Reusable Sandpaper Black & Decker BDAM120 Reusable Sandpaper
Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas. Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas. Works with all detail sanders, Black & Decker Mouse and Mouse Dust Trap. Holes provides efficient dust collection. Reusable hook & loop backing. Includes 5 contour sheets for tight and curved areas.
Plews/Edelmann 13-237 Hose Coupling Nyalox 541-778--4 Medium Mounted Wheel Brush Nyalox 541-784-4 Fine Mounted Wheel Brush
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
Nyalox 541-772-4 Coarse Mounted Wheel Brush Tru-Flate 13-325 Air Line Coupler Nyalox 541-782-4 Flap Wheel Brush
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. 3" & 4"  Mandrel mounted wheel brushes, ideal for getting into crevices and contours.  Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings.
Nyalox 541-776-4 Flap Wheel Brush Nyalox 541-788-4 Flap Wheel Brush Tru-Flate 13-101 Coupler/Plug Set
Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Maintains shape & will not rust. Will not shed bristles under normal conditions. Abrasive grit is impregnated throughout each bristle. Safer to use, will not puncture skin. Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals. Prepare plastic, fiberglass, & rubber surfaces for adhesives. Preparing metal surfaces for primers & paint. Cleaning unfinished tile, stone, cement, and brick mortar. Removing old paint and finishes from wood. Cleaning & Sanding wood turnings, railings, banisters, trim & molding. Rounding and blending edges, cutouts and joinings. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
HOSE AIR END REUSABLE 1/4IN   Bostitch Prozhoze Reusable Hose Repair Kit HOSE AIR ED RUSBL W/SWVL 3/8IN
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-301 Coupler/Plug Set Mintcraft DZA019 Hose Coupler Set HOSE AIR ED RUSBL W/SWVL 1/2IN
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-425 Air Line Coupler Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Tru-Flate 13-435 Air Line Coupler
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
Tru-Flate 13-537 Air Line Coupler Plews/Edelmann 13-603 Hose Coupling Tru-Flate 13-203 Coupler/Plug Kit
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235).
Plews/Edelmann 13-605 Hose Coupling Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter HOSE AIR END REUSABLE 3/8IN
Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-611 Air Line Coupler Tru-Flate 13-613 Air Line Coupler Tru-Flate 13-401 Coupler/Plug Set
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
Tru-Flate 13-527 Air Coupler Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 12-537 Air Hose Plug
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
COUPLER-PLUG SET 4PC          Tru-Flate 13-713 Air Line Coupler Mintcraft ATA-052-1 Hose Plug
COUPLER-PLUG SET 4PC
Our Price: $14.26
Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. High speed steel.
Mintcraft ATA-053-A Hose Plug Mintcraft ATA-050 Air Hose Connector Mintcraft TA-054 Air Hose End
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. Brass. Mintcraft Air Hose End, 1/4 in Nominal, MNPT End, 3/8 in Inside Diameter
Mintcraft ATA-057 Hose Plug Mintcraft ATA-0561 Air Line Connector Mintcraft ATA-0243L Barb Hose Splicer
Mintcraft Hose Plug, 1/4 in Nominal, MNPT End, Brass Brass. All brass.
Mintcraft ATA-055 Quick Coupler Pro-Fit 0059152 Finish Nail Pro-Fit 0059192 Finish Nail
All brass. Pro-Fit Finish Nail, 8D, 2-1/2 in Length, 9/64 in Head, 12-1/2 ga, Ring Shank, Steel, ASTM A153, Hot Dip Galvanized, Used to Exterior Trim and Moldings Pro-Fit Finish Nail, 16D, 3-1/2 in Length, 11/64 in Head, 11 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Used to Exterior Trim and Moldings
Pro-Fit 59092 Finish Nail Pro-Fit 0059172 Finish Nail Pro-Fit 59132 Finish Nail
Pro-Fit Finish Nail, 4D, 1-1/2 in Length, 7/64 in Head, 15 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Used to Exterior Trim and Moldings Pro-Fit Finish Nail, 10D, 3 in Length, Cupped Head, 5/32 in Head, 11-1/2 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Used to Exterior Trim and Moldings Pro-Fit Finish Nail, 6D, 2 in Length, 1/8 in Head, 15 ga, Smooth Shank, Steel, ASTM A153, Hot Dip Galvanized, Used to Exterior Trim and Moldings
Mintcraft ATA-056 Quick Coupler 3M 15299 Floor Surfacing Paper 3M 15304 Floor Surfacing Paper
All brass. Roll size is 8 inches wide  x 50 yards length, used on professional drum machines for general sanding. Tough backing with fast cutting Resinite adhesive and sharp, durable synthetic mineral construction to save time, produce a better finish, cut faster and for long life. Easily cuts to size where drum resurfacing changes sheet length. Roll size is 8 inches wide  x 50 yards length, used on professional drum machines for general sanding. Tough backing with fast cutting Resinite adhesive and sharp, durable synthetic mineral construction to save time, produce a better finish, cut faster and for long life. Easily cuts to size where drum resurfacing changes sheet length.
   
 
1