Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER ABRASIVE ACCESSORIES > SANDING BELTS - BULK
Choose a sub category:
NAILS - BULK NAILS - BULK NAILS - BULK
NAILS - PACKAGED NAILS - PACKAGED NAILS - PACKAGED
SPECIALTY - TACKS & BRADS SPECIALTY - TACKS & BRADS SPECIALTY - TACKS & BRADS
PNEUMATIC FASTENERS PNEUMATIC FASTENERS PNEUMATIC FASTENERS
Sort By:
1
Dremel MM300 Adapter Tru-Flate 21-133 Air Hose Fitting Stanley THREADTAPE Thread Sealant Tape
Allows Multi-Max accessories (excluding multi-flex) to fit all current oscillating tools from Fein, Rockwell, Bosch, Craftsman, Rigid and more. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Properly seals all male threaded connections to prevent air leaks.
Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 21-535 Air Hose Bushing Norton 3307394 Sanding Disc
All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends. For an ultra smooth finish of drywall compound. Anti-clog coating on disc decreases loading and promotes optimal dust collection. Fits Orgill SKU# 3310117.
Norton 3307402 Sanding Disc Norton 3308947 Sanding Disc Tru-Flate 12-225 Air Line Plug
For an ultra smooth finish of drywall compound. Anti-clog coating on disc decreases loading and promotes optimal dust collection. Fits Orgill SKU# 3310117. For an ultra smooth finish of drywall compound. Anti-clog coating on disc decreases loading and promotes optimal dust collection. Fits Orgill SKU# 3310117. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Norton 3307436 Sanding Disc Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
For an ultra smooth finish of drywall compound. Anti-clog coating on disc decreases loading and promotes optimal dust collection. Fits Orgill SKU# 3310117. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 12-135 Air Line Nipple
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-335 Air Line Plug Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-222 Air Hose Fitting
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-505 Air Line Coupling Stanley TIRE-14F Tire Chuck
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. Plated steel; corrosion resistant steel for long life.
Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 21-242 Air Hose Fitting Stanley 38M-14M Hex Reducer Nipple Tru-Flate 12-605 Air Line Plug
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Connects FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Plews 21-557 Drain Cock Plews/Edelmann 12-227/6  Air Compressor Hose Fittings
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Plug 1/4". I/M x 3/8" MNPT.
Tru-Flate 17-351 Ball Foot Direct Air Line Chuck Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck
Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Tru-Flate 12-425 Air Line Plug Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 12-603 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Plews/Edelmann 12-611  Air Compressor Hose Fittings PLUG 3/8IN TF X 3/8IN FNPT    Stanley AP-38F Auto Hose Adapter
Plug 3/8". TF x 1/4" FNPT. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life.
Stanley AP-38M Auto Hose Adapter Stanley AP-14M Auto Hose Adapter Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections.
ADAPTOR HEX INTERFACE ROCKWELL PAD BACKING SANDING 5 INCH    SPLICER HOSE REUSABLE 1/4IN
Adaptor for Rockwell SoniCrafter Hex interface model. Universal conversion disc with hook and lock backing converts 5 hole and 8 hole pressure sensitive adhesive orbital and DA sanders to hook and lock. Break-through innovation improves performance, extends sanding life and increases productivity. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 1/4IN   Tru-Flate 12-705 Air Line Plug Mintcraft FDQ910 Inflation Kit
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle.
SANDPAPER 120 GRIT 5 PACK     SANDPAPER 180 GRIT 5 PACK     SANDPAPER 220 GRIT 5 PACK
The sandpaper attaches to the hook and loop sanding pad. Use to remove excess wood, finish and paint for faster surface removal in smaller areas. The holes in the paper allow for dust collection through the pad, resulting in cleaner and faster detailed sanding. The sandpaper attaches to the hook and loop sanding pad. Use to remove excess wood, finish and paint for faster surface removal in smaller areas. The holes in the paper allow for dust collection through the pad, resulting in cleaner and faster detailed sanding. The sandpaper attaches to the hook and loop sanding pad. Use to remove excess wood, finish and paint for faster surface removal in smaller areas. The holes in the paper allow for dust collection through the pad, resulting in cleaner and faster detailed sanding.
SANDPAPER 60 GRIT 5 PACK      SANDPAPER 80 GRIT 5 PACK      Tru-Flate 17-355 Snap Clip On Air Line Chuck
The sandpaper attaches to the hook and loop sanding pad. Use to remove excess wood, finish and paint for faster surface removal in smaller areas. The holes in the paper allow for dust collection through the pad, resulting in cleaner and faster detailed sanding. The sandpaper attaches to the hook and loop sanding pad. Use to remove excess wood, finish and paint for faster surface removal in smaller areas. The holes in the paper allow for dust collection through the pad, resulting in cleaner and faster detailed sanding. Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating.
SANDPAPER MESH OSCIL 120GRIT  SANDPAPER MESH OSCIL 80GRIT   SPLICER HOSE REUSABLE 3/8IN
For metal cutting. Triangle type; fine grade. Mesh sandpaper is washable and cleaning the mesh minimizes clogging. Universal dust extraction. Hook and loop attachment. Suitable with oscillating tools. For metal cutting. Triangle type; medium grade. Mesh sandpaper is washable and cleaning the mesh minimizes clogging. Universal dust extraction. Hook and loop attachment. Suitable with oscillating tools. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Dremel MM70P Assortment Sandpaper Set Dremel MM70W Assortment Sandpaper Set HOSE AIR END REUSABLE 3/8IN
Sand paper accessory allows the Multi-Max to sand paint, varnish, filling compound on a variety of surfaces. Includes two each of 80, 120 and 240 grit. Sand paper accessory allows the Multi-Max to be used for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Includes two per pack of 60, 120 and 240 grit. Requires MM11 Hook and Loop pad accessory (784.7205). Use with 122.5929. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Stanley IC-14M Industrial Hose Adapter Stanley IC-14F Industrial Hose Adapter Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler
Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections. Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler SANDPAPER SET 12 PIECE        Sonicrafter RW8942 Adapter Bushing
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. 12 hook and loop sanding triangles: (3) 60G, (3) 80G, (3) 120G and (3) 240G. For use with most detail sanders and all brands of Multi-Purpose oscillating tools. Adapts Universal Fit accessories to fit onto prior model Sonicrafter tool with hex interface. Universal fit system allow accessory to fit all major brand oscillating tools.
SPLICER HOSE REUSABLE 1/2IN   HOSE AIR END REUSABLE 1/2IN   Tru-Flate 13-235 Industrial Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Tru-Flate 13-225 Air Line Coupler Stanley Industrial IHKIT-14F Hose Coupler Kit Bostitch BTFP72327 Ball Drain Valve
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Turn ball type drain valve. 1/4" NPT male thread.
COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT   Norton 02228 3X Power Sanding Belt
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.
Sonicrafter RW9157 Replacement Fastening Kit Stanley HREPAIR-38 Hose Splice Kit Tru-Flate 41-300 Hose Repair Kit
Replacement flange for the SoniCrafter tool. Includes: screw, flange and allen key. Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose; (1) barb x barb hose splicer for 3/8" hose & (3) Clamps. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose
Bosch Accessories CH01 Spiral Saw Adapter Kits Tru-Flate 13-125 Air Line Coupler Tru-Flate 17-383 Dual Foot Direct Air Line Chuck
Conversion kit allows you to change 1/4" collets to accept 1/8" bits on RotoZip tools. Includes: adapter, hex wrench, guidepoint bit and sabrecut bit. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus.
Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Stanley TEE-14F Tee Fitting WHEEL MASONRY CUTTING
Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Abrasive material for high performance masonry cutting applications. Cuts a wide range of masonry materials including stone, slate, cement board, bricks, concrete, cement backer board and more. 30 grit, silicon carbide grain. No need for excessive pressure, the tool does the work. Max rpm 20,000/min.
Tru-Flate 13-135 Air Line Coupler Plews/Edelmann 18-603 Air Blow Guns Stanley 3WAY-RND 3-Way Round Air Line Manifold
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies. Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum.
Stanley BTFP72330 Safety Blow Gun Plews/Edelmann 18-319 Tru-Flate Air Safety Blow Guns HOSE AIR END REUSABLE 1/4IN
Safety blow gun. Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-201 Coupler/Plug Set Bostitch Prozhoze Reusable Hose Repair Kit Tru-Flate 13-335 Air Line Coupler
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-605 Barb Air Line Swivel Plews/Edelmann 13-237 Hose Coupling HOSE AIR ED RUSBL W/SWVL 3/8IN
Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Norton 7660703292 Backing Pad HOSE AIR ED RUSBL W/SWVL 1/2IN Tru-Flate 13-325 Air Line Coupler
Fits Porter Cable drywall sander model# 7800. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru Flate 18-143 Clip-On Safety Blow Gun Rockwell RW8941 Multifit Finger Shape Sanding Pad Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold
Converts any standard ball foot tire chucks to a safety blowgun.  Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure.  Conforms to No.1001 OSHA regulation. Epoxy finish. Holds sanding sheet for detail sanding in very small areas, openings and corners. Use on wood plastic and hardened fillers. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory.
Tru-Flate 13-101 Coupler/Plug Set Tru-Flate 17-373 Grip Tite Direct Air Line Chuck Mintcraft DZA019 Hose Coupler Set
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released. 3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler.
Tru-Flate 13-301 Coupler/Plug Set 3M 99261 Resin Bond Power Sanding Belt Dremel MM14 Quick Fit Sanding Pad with Hook and Loop Attachment
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Tough, durable aluminum oxide abrasive on resin bond X-weight cloth backing for use on portable or table-top bench sanders. Rental. Allows the Multi-Max oscillating tool to accept sand paper and diamond paper. Quick-fit design allows for fast accessory changes. Compatible with all dremel multi-max tools.
PAD HOOK/LOOP BACK            Scotch-Brite 9410 Sanding Disc Mintcraft CC970 Air Blow Gun
Low profile design gets into tight spots. High-density hook and loop attachment system holds accessories securely. Ideal for detail sanding jobs utilizing quick attach hook and loop sandpaper. For use with all brands of Multi-Purpose Oscillating tools. Used to turn power drills into a stripper. Attaches to a 3M hook and loop back-up pad for use on flat projects requiring fast removal of surface paint and rust from wood, metal, and plastic. Die-cast body. 1/4" air inlet.
Rotozip CN1 Collet Set Dewalt DW4942 Backing Pad with Clamp Nut BLADE TRIANGULAR SANDPAD 1PK
Works with all RotoZip spiral saws, and drywall routers. Kit includes 1/8", 5/32", and 1/4" collets and collet nut. Paper backing pad assembly works at a maximum of 16,000 RPM, and includes a 5/8-by-11-inch clamp nut. Carded. For sanding wood, paint, hardened fillers and other similar construction materials.
DeWalt DWA4200 Triangular Head Oscillating Sanding Pad Rockwell RW8938 Multifit Finger Shape Sanding Pad Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
For use on all major brands. No adapter required. Design allows for long life of sanding pad. Universal fit for use on all brands of oscillating tools. For detail sanding in small areas and corners. Use with extraction attachment for dust removal. Use on wood, plastic and hardened fillers. Perforated. For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
Tru-Flate 21-707 Safety Valve Tru-Flate 13-435 Air Line Coupler HOSE AIR END REUSABLE 3/8IN
Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-425 Air Line Coupler Rapid Strip C 7660705466 Type C Non-Woven Sanding Disc Tru-Flate 13-537 Air Line Coupler
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only. Use to strip away rust, corrosion, scale, paint and epoxy. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI.
Plews/Edelmann 13-603 Hose Coupling Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-605 Hose Coupling
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. (1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru Flate 18-233 Safety Blow Gun Plews/Edelmann 18-231 Tru-Flate Air Blow Guns Wagner 513041 Replacement Abrasive Wheel
Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI. Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet. 3M exclusive disc for Paint Eater removes paint chips, feather the edges and abrades surfaces for a smoother finish. Open-web design minimizes the load up of paint and dust. Use with PaintEater removal tool (948.9212).
Plews/Edelmann 18-302 Tru-Flate Air Safety Blow Guns Tru Flate 18-207 Standard Blow Gun Bostitch Prozhoze Reusable Hose Repair Kit
Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension. Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
Rockwell RW9155 Assortment Finger Shape Sandpaper Set Tru-Flate 13-613 Air Line Coupler Tru-Flate 13-611 Air Line Coupler
Includes 4 pieces of each- 40, 80, 120, 180, and 220 grit. Hook and loop paper retention. Use with RW9147 (Orgill SKU# 325.4372). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Bosch Accessories PA1202 Woodrazor Planer Blades Tru-Flate 13-527 Air Coupler SAND PAD/PAPER SET4-1/2IN PERF
Double-edged blade cannot be resharpened. Resists fractures from accidental nail and staple strikes. For use with Nos.1594, 1594K, 3365 (SKU 621.9976) 3-1/4" planer, 53514, 53518. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. For fast, efficient sanding of medium sized areas. The alternative to random orbit or pad sanders. No kickback on edges. Easy operation, excellent removal rate. Can be used with our without dust extraction. Plastic carrier plate to prevent damage and marks on the work piece. Round shape, perforated version, hook and loop surface. Includes (1) sanding disc 4-1/2" diam., perforated, (2) sanding sheets of 60, 80 and 180 grit each, perforated.
Tru-Flate 13-401 Coupler/Plug Set Tru Flate 18-203 Standard Blow Gun Dewalt DW6658 Planer Blades
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Sharpening on both sides allows reversal for longer life. For use with No. DW675K Planer.
Dewalt DW6654 Planer Blades Gator 3873 Quick Change Backing Pad Tru-Flate 12-537 Air Hose Plug
Reversible carbide straight blades that can be sharpened on both sides for longer life. For use with DW677K, DW680K or DW678K planers. Flexible pad for flat or contoured surfaces. Fits angle grinders with 5/8" spindle. Gator 4-1/2" backer pads are designed to support 4-1/2" x 7/8" fiber discs. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 24-801 Air Line Pressure Gauge Plews/Edelmann 18-241 Air Blow Gun Kits BLOWGUN SET 2PC
BLOWGUN SET 2PC
Our Price: $16.25
PSI 0-200  0-14 kg/cm2; mounting back. Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Includes: standard nozzle, tapered inflator nozzle and ball inflator nozzle. Light-weight aluminum body with OSHA compliant safety nozzle. 40 CFM
COUPLER-PLUG SET 4PC          3M 9681 Sandblaster Pro Sanding Discs Rockwell RW9145 Assortment Sanding Sheet Set
COUPLER-PLUG SET 4PC
Our Price: $16.36
Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. 4.5" clog resistant disc. For stripping all coatings and surfaces. Long lasting. Contains 1 disc. Perforated for use with dust extraction kit. Hook & loop. For universal sanding applications. Includes four each: 40, 80, 120, 180, 220 grit sanding sheets.
3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt Tru-Flate 13-713 Air Line Coupler
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
Bostitch BTFP72326 Mini Regulator and Gauge Kit SANDING PAD TRIANGLE          3M 761D Resin Bond Power Sanding Belt
Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi Standard version. Plastic carrier plate to prevent damage and marks on the work piece. Triangular shape, hook and loop surface. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Plews/Edelmann 18-221 Tru-Flate Air Blow Guns Plews 41-135 Air Line Regulator with Gauge
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 inch ID hose or tubing. Use for spray- cleaning engines, applying protective coating, etc. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends.
3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Mintcraft Tire Inflator Gauge 3M 761D Resin Bond Power Sanding Belt
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Die cast body and dial type gauge with rubber protector. Fitted with single clip-on connector. Air pressure: 0-220 PSI. Air inlet: 1/4'' NPT. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Dewalt DW4388 Sanding Pad 3M 761D Resin Bond Power Sanding Belt
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. One 8-hole, medium grade replacement pad for sanders with dust collection. Pad provides the ability to switch between grits. Fits all standard 5" random orbit sanders. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Plews/Edelmann 41-101 Air Tool Oilers Dewalt DW6655 Resharpenable Edge Replacement Planer Blade
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Resharpenable; for use with Dewalt, DW680K and  Makita, N1900 planers only.
DIAMOND PAPER                 Makita 743081-8 Round Backing Pad with Hook and Loop Attachment Fein 63717082033 Resin Bond Sanding Sheet Kit
DIAMOND PAPER - Case of 2
Our Price: $25.60
Designed for light grinding, shaping and smoothing. Ideal for use on masonry, thin-set, mortar and rust. Also ideal for removing paint or oil stains from your driveway, excess mortar from bricks and rust from patio furniture. Preparing the surface for tile replacement is also a common application for this abrasive paper. Finishing sander pad for flat sanding; use with Hook & Loop abrasive paper. For universal use on almost all surfaces. High performance aluminum oxide abrasive and full synthetic resin bonding. Includes 10 sanding sheets of each grit: (60, 80, 120, 180, 240), unperforated, with hook and loop.
Tru-Flate 24-343 Manual Mini Air Line Filter Norton 27993 Portable Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt
Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height. For high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing of all metals, blending woods and for abrasive planing of wood. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt 3M 761D Resin Bond Power Sanding Belt Mintcraft ATA-052-1 Hose Plug
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. High speed steel.
Mintcraft ATA-053-A Hose Plug Sta-Lube SL22133 Air Compressor Oil 3M 761D Resin Bond Power Sanding Belt
Dependable male steel mechanical fitting is perfect for rapidly and securely separating air hoses. Helps promote longer life in all types of reciprocating and rotary compressors. Solvent refined and clay filtered for long lasting, anti-foul operation. Cleans valve seat deposits and extends life. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Norton 3307428 Sanding Disc Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. For an ultra smooth finish of drywall compound. Anti-clog coating on disc decreases loading and promotes optimal dust collection. Fits Orgill SKU# 3310117. Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height.
3M 761D Resin Bond Power Sanding Belt Stanley Industrial Air Compressor Regulator with Gauge REGULATR TOOL AT-HAND INLN AIR
Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading. Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI.
Norton 03996 3X Power Sanding Belt Tru-Flate 41-175 Air Compressor Accessory Kit Matrix BDCMTO Oscillating Tool Attachment
For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment. Tool free blade release makes accessory changes quick and easy. The quick release lever eliminates the need for a hex key. Cuts drywall, metal, wood, plastic, composite and other materials. Variable speed allows for precision performance that's right for each job. 2.8 oscillating angle. Includes plunge cutting blade, sanding platen, 2 sand papers.
Norton 04000 3X Power Sanding Belt Porter-Cable 77085 Drywall Sanding Pad Porter-Cable 77225 Drywall Sanding Pad
For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood. Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 180 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 180 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning.
Porter-Cable 77105 Drywall Sanding Pad Dewalt DW7332 Planer Blades Norton 03999 3X Power Sanding Belt
Foam pad with abrasive disc attached, used with No.7800 drywall sander (SKU 673.6730), 80 grit textured paint removal, wallpaper paste removal, 100 grit fast sanding and smoothing, 120 grit all-purpose applications, 150 grit final sanding and smoothing, 180 grit lightweight quick-dry drywall sanding and smoothing, paint conditioning, 220 grit light-weight quick-dry drywall sanding and smoothing, paint conditioning. Resharpenable knives made of M2 laminated high speed tool steel. Easy knife changes. Fits No. DW733 planer. For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.
Tru-Flate 41-907 Air Tank Conversion Kit Dewalt DW7352 Reversible Replacement Planer Blade Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge
Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Disposable, reversible thickness planer knives made of M2 laminated tool steel that stays sharper and lasts longer than conventional tool steel, machined locator holes help users align knives on cutter-head during knife change. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary.
3M 27487 Resin Bond Power Sanding Belt Norton 27945 Power Sanding Belt Dewalt DW7342 Reversible Planer Blade