Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER ABRASIVE ACCESSORIES > BUFFING PADS/BONNETS
Sort By:
1
Tru-Flate 21-133 Air Hose Fitting Tru-Flate 21-595 Hose Adapter with Ball Socket Tru-Flate 21-535 Air Hose Bushing
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, corrosion resistant material. Connects FPT to FPT. With ball socket. All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends.
Tru-Flate 12-225 Air Line Plug Tru-Flate 12-125 Hose Plug Tru-Flate 12-235 Air Line Plug
Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 12-325 Air Line Plug Tru-Flate 21-423 Barb Hose Splicer Tru-Flate 12-135 Air Line Nipple
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 12-335 Air Line Plug Tru-Flate 21-123 Air Hose Fitting Tru-Flate 21-222 Air Hose Fitting
Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
Tru-Flate 21-143 Air Hose Fitting Tru-Flate 21-505 Air Line Coupling Stanley TIRE-14F Tire Chuck
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Pipe couplings,thread adapters and bushings allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects FPT to FPT. Plated steel; corrosion resistant steel for long life.
Tru-Flate 12-435 Air Line Plug Tru-Flate 21-147 Air Hose Fitting Tru-Flate 12-527 Air Line Plug
Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure. All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
Tru-Flate 21-242 Air Hose Fitting Stanley 38M-14M Hex Reducer Nipple Tru-Flate 12-605 Air Line Plug
All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. Connects FPT to FPT. Use thread sealant tape on all male threads for air tight connections. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-515 Air Line Coupling Plews/Edelmann 12-227/6  Air Compressor Hose Fittings Tru-Flate 17-351 Ball Foot Direct Air Line Chuck
Pipe coupling allows user to adjust thread sizes from 1/8" NPT through 1/2" NPT with either male or female ends. Corrosion resistant material. Connects MPT to MPT. Plug 1/4". I/M x 3/8" MNPT. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.
Tru-Flate 17-369 Ball Foot Direct Air Line Chuck Tru-Flate 17-361 Ball Foot Direct Combination Air Line Chuck Tru-Flate 12-425 Air Line Plug
Has a built in shut off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Combination No. 17-350 chuck with 1/4" ID hose barb No. 21-123. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines comes directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 21-467 Barb Hose Splicer Tru-Flate 12-603 Air Line Plug Plews/Edelmann 12-611  Air Compressor Hose Fittings
All brass construction resists rust and will not corrode as easily as other materials.  Precision machined to high quality standards.  Use with hose clamp or ferrules. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plug 3/8". TF x 1/4" FNPT.
PLUG 3/8IN TF X 3/8IN FNPT    Stanley AP-38F Auto Hose Adapter Stanley AP-38M Auto Hose Adapter
Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Plated steel construction with drag guard for job site durability and reliability. Large body size for maximum air flow and tool performance. Corrosion resistant steel for long life. Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections.
Stanley AP-14M Auto Hose Adapter 3-IN-ONE 120046 Pneumatic Tool Oil Marvel Mystery MM080R Air Tool Oil With Childproof Cap
Plated steel construction with drag guard for job site durability and reliability. Pre applied thread sealant for airtight connections. Eight ball coupler design for balanced, strong, secure connections. Marksman spout for easy precision application. Professional grade formula. Lubricates and protects to extend tool life. Quickly removes gum and sludge. Prevents rust. Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
Stanley-Bostitch BTFP72333  Air Compressor Hose Swivel Plug - Male Dico 535 Arbor Adapter ADAPTER REDUCING BUSHING 3/4IN
Swivel design minimizes hose twisting for improved control. Corrosion-resistant steel. Pre-applied thread connections. Adaptable to all drills, for use on mounting buffing wheels. Carded. Reducing bushing adapters for 3/4" thick bench grinding wheels. Arbor reducing bushings. Reduces arbor to multi-sizes: 1/2" (12.7mm) or 5/8" (15.88mm).
ADAPTER REDUCING BUSHING 1INCH Dico 527-36-4 Buffing Wheel SPLICER HOSE REUSABLE 1/4IN
Reducing bushing adapters for 1" thick bench grinding wheels. Arbor reducing bushings. Reduces arbor to multi-sizes: 1/2" (12.7mm), 5/8" (15.88mm) or 3/4" (19.05mm). Superior grade of fine cotton sheeting held together with two or four circles of lockstitch sewing. Gives a resilient, cushioned effect when in use. Used for light cutting and coloring. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Dico 584-45600 Tie-On Polishing Bonnet Gator 3050 Stick-On Backing Pad HOSE AIR END REUSABLE 1/4IN
Drawstrings reversible. Withstands multiple washings. Applications: Applying or removing wax. Use with random orbital polishing machines or backing pads. This complete kit contains 1 universal back up pad and 3 stick-on sanding discs. The 1/4" arbor is designed to fit any electric drill. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Dico 527-60-4M Buffing Wheel Blaster 16-ATL Air Tool Lubricant Tru-Flate 12-705 Air Line Plug
Discs of soft flannel joined by two or four circles of lockstitch sewing. Follow intricate contours easily; will not scratch; gives the most brilliant finish of all buffs. Extra soft wheel is made of the finest combed flannel to create an extra soft nap. For use with rouge to color gold, silver, and other precious metals; All final coloring operations. Lubricates and protects internal tool parts. Formulated for use with in-line oilers. Removes moisture and provides lubrication. Protects tools against high speeds and shock loads. Use on all pneumatic tools and equipment. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 17-355 Snap Clip On Air Line Chuck Dico 527-40-4 Buffing Wheel Dico 584-47800 Tie-On Polishing Bonnet
Snap-On Chuck Clip. Converts any single foot chuck to a clip-on chuck. Fits all standard ball foot chucks with .672-32 thread.  Holds chuck to tire valve while inflating. Coarse cutting action. Sewn in a continuous spiral from the center to the face. Dependable, well-balanced, long wearing wheels for general shop use. Carefully selected, high-grade cotton sheeting assembled to give maximum cutting action. One inch hole size packaged with DICO toothed flanges for 1/2" spindle. Drawstrings reversible. Withstands multiple washings. Applications: Applying or removing wax. Use with random orbital polishing machines or backing pads.
SPLICER HOSE REUSABLE 3/8IN   Dico 584-45730 Tie-On Polishing Bonnet Gator 3052 Stick-On Backing Pad
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Washable and reusable with drawstrings. Applications: Polishing wood, fiberglass, plastics and 1st stage automotive & marine buffing. This complete kit contains 1 universal back up pad and 3 stick-on sanding discs. The 1/4" arbor is designed to fit any electric drill.
HOSE AIR END REUSABLE 3/8IN   Dico 527-60-6 Buffing Wheel Dico 584-42360 Tie-On Polishing Bonnet
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Discs of soft flannel joined by two or four circles of lockstitch sewing. Follow intricate contours easily; will not scratch; gives the most brilliant finish of all buffs. Extra soft wheel is made of the finest combed flannel to create an extra soft nap. For use with rouge to color gold, silver, and other precious metals; All final coloring operations. Tie on Bonnets made of 100 percent lambs wool. Withstands multiple washings and chemicals. Used on heavily soiled surfaces for applying waxes, glazes & compound.
CUTTERS REPL GRIND DRESSER WHL Blaster 16-ATC Air Tool Conditioner Stanley IC-14M Industrial Hose Adapter
Replacement cutters for bench grinding wheel dresser.  Heat treated carbon steel. 10-1/2". Cleans and restores pneumatic tool parts. Breaks loose deposits that create friction. Reaches deep into small recesses to leave a protecting film of lubrication. Can be used as in-line lubricant. Removes moisture. An effective antifreeze. Protects tools from freezing down to -25 degreesF. Hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Pre-applied thread sealant for air tight connections.
Stanley IC-14F Industrial Hose Adapter Stanley-Bostitch BTFP72320  Air Compressor Hose FittingsSeries Coupler Stanley-Bostitch BTFP72321  Air Compressor Hose Coupler
Plated steel construction with drag guard for job site durability and reliability. Six ball coupler design for balanced, strong, secure connections. Corrosion resistant steel for long life. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections. Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball design 1/4 coupler for balanced, strong and secure connections.
Dico 527-41-4M Buffing Wheel Dico 584-46953 Polishing Bonnet SPLICER HOSE REUSABLE 1/2IN
Quick mount with 1/4" mandrel pressed into the buffs. 3/4" Cotton cushion sewn. For smaller buffing jobs; light cutting & for coloring smaller objects. Made from lambs wool blends with synthetic backing. Available in various sizes and pile heights; can withstand multiple washings. Used for compounding and polishing of soiled surfaces. 1 1/8" pile. Carded Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
HOSE AIR END REUSABLE 1/2IN   Tru-Flate 13-235 Industrial Air Line Coupler Tru-Flate 13-225 Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Stanley Industrial IHKIT-14F Hose Coupler Kit Bostitch BTFP72327 Ball Drain Valve Dico 584-42760 Tie-On Polishing Bonnet
Six hardened stainless steel locking balls for maximum performance. Corrosion resistant steel for long life. Turn ball type drain valve. 1/4" NPT male thread. Tie on Bonnets made of 100 percent lambs wool. Withstands multiple washings and chemicals. Used on heavily soiled surfaces for applying waxes, glazes & compound.
COUPLER UNIVERSAL 1/4IN MPT   COUPLER UNIVERSAL 1/4IN FPT   Norton 02228 3X Power Sanding Belt
Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. Lightweight compact design. Last longer than standard couplers. 1/4" body size, fits Tru-Flate, Industrial/Milton and Aro 1/4" plugs. For high speed sanding and finishing of flat surfaces on wood, plastic, and fiberglass, grinding and finishing of all metals, blending welds and abrasive planing of wood.
Stanley HREPAIR-38 Hose Splice Kit Dico 527-36-6 Buffing Wheel Tru-Flate 41-300 Hose Repair Kit
Kit Includes: (1) 1/4" MPT x barbed hose splicer for 3/8" hose; (1) barb x barb hose splicer for 3/8" hose & (3) Clamps. Superior grade of fine cotton sheeting held together with two or four circles of lockstitch sewing. Gives a resilient, cushioned effect when in use. Used for light cutting and coloring. Contains all parts necessary to repair a direct air line hose assembly. Each kit contains: (1) Single Foot Air Chuck, 1/4" Female NPT, (1) Male Hose End 1/4" ID hose x 1/4" NPT, (1) Hose Splicer, 1/4" ID hose, (3) Band Style Hose Clamps, fits 3/8" ID hose
Bosch Accessories CH01 Spiral Saw Adapter Kits Tru-Flate 13-125 Air Line Coupler Tru-Flate 17-383 Dual Foot Direct Air Line Chuck
Conversion kit allows you to change 1/4" collets to accept 1/8" bits on RotoZip tools. Includes: adapter, hex wrench, guidepoint bit and sabrecut bit. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Built-in shut-off valve cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks.  Extension for hard-to-reach dual wheel valves on tractors, trucks or bus.
Tru-Flate 17-353 Ball Foot Direct Clip On Air Line Chuck Stanley TEE-14F Tee Fitting Marvel Mystery MM85R1 Air Tool Oil With Childproof Cap
Combination No. 17-350 chuck with No. 17-355 chuck clip. Has a built-in shut-off valve and therefore cannot be used on inflator gauges.  Use when air supply lines come directly from the compressor with no other valve in the line.  Automatic inflators use direct air line chucks. Stanley Tee Fitting, 1/4 in Nominal, FNPT End, Brass Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output.
WHEEL MASONRY CUTTING         Tru-Flate 13-135 Air Line Coupler DISC SANDING STICK FAST 5 KIT
Abrasive material for high performance masonry cutting applications. Cuts a wide range of masonry materials including stone, slate, cement board, bricks, concrete, cement backer board and more. 30 grit, silicon carbide grain. No need for excessive pressure, the tool does the work. Max rpm 20,000/min. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. 5" Sanding disc kit for drills includes: (2) Ultra coarse/fast removal 40 grit pads, (2) coarse/removal 80 grit pads and (1) fine/final prep 120 grit pad. For use on wood, metal and plastics. Clog-Shield, Diablo's own blend of grinding agents, reduces loading, thus maximizing productivity.
BLADE FLUSH CUT PRECISION     BLADE SCRAPER 2 PIECE SET     HOSE AIR END REUSABLE 1/4IN
Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools. Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Tru-Flate 13-201 Coupler/Plug Set Bostitch Prozhoze Reusable Hose Repair Kit BLADE FLUSH CUT WIDE
Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-225 1/4" Male NPT Plug and  No.13-235 1/4" Female NPT Coupler. Design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting. For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Use with all brands of multi-purpose oscillating tools.
Tru-Flate 13-335 Air Line Coupler Sonicrafter RW8921 Rigid Scraper Blade with Fit System Sonicrafter RW8922 Rigid Scraper Blade with Fit System
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools. For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools.
Scotch-Brite 7771 Stripper Brush WHEEL BENCH GRINDING MED 6IN  Scotch-Brite 9413NA Sanding Disc
One piece pad/mandrel assembly attaches easily to standard household drill (1/4", 3/8", 1/2") for removing paint from wood and metal surfaces. Features Scotch-Brite abrasive web that will not rust or splinter like wire brushes. Conforms to surface contours and reduces gouging. Use 2-disc on 1 mandrel, or double-wide for longer, tougher jobs. For use with bench grinders. 3/4" blade thickness, maximum RPM 4,100 is designed for cutting metal. Removes paint and varnish from contoured surfaces. Mounts directly to power drills by inserting the mandrel into a drill chuck. Fits: All Household Drills. Applications: Removing Paints, Varnishes, Rust; Sanding, Polishing & Buffing. 1/4" shaft.
BLADE SCRAPER FLAT PAINT/CAULK BLADE 3/8INCH WOOD 1-5/8 DEPTH Tru-Flate 21-605 Barb Air Line Swivel
For removal of stubborn caulk, paint, adhesive residue, tile adhesive and window putty. For sawing. Detailed plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 16 teeth per inch. Eliminates kinked and twisted air line hose by swiveling a full 360 degrees. Use on air lines, tools, and compressor connections to increase flexibility and convenience. 150 PSI maximum working pressure.
Plews 4-25E-RET Recoil Air Hose Dico 527-40-6 Buffing Wheel CUTTER SEALANT TAPERED 3 INCH
Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Coarse cutting action. Sewn in a continuous spiral from the center to the face. Dependable, well-balanced, long wearing wheels for general shop use. Carefully selected, high-grade cotton sheeting assembled to give maximum cutting action. One inch hole size packaged with DICO toothed flanges for 1/2" spindle. For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3" deep. For use with all brands of Multi-Purpose oscillating tools.
WHEEL BENCH GRNDG FN 6IN      Plews/Edelmann 13-237 Hose Coupling HOSE AIR ED RUSBL W/SWVL 3/8IN
For use with bench grinders. 3/4" blade thickness, maximum RPM 4,100 is designed for cutting metal. Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps.
Ali 9485 Drill Mount Extra Coarse Paint/Rust Strap Kit HOSE AIR ED RUSBL W/SWVL 1/2IN Sonicrafter RW8932 Multi-Function End Cut Blade
Fits electric drills. For removing surface defects on metal, wood, plastic and fiberglass. For stripping paint and primers. The open-webbed, semi-flexible design of this wheel makes it easy to strip edges, contours and even surface without gouging. Silicon carbide grain is uniformly distributed throughout the wheel, allowing for aggressive removal of paint and rust. Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
Tru-Flate 13-325 Air Line Coupler BLADE PLUNGE HI-CARBON 1-1/4IN Sonicrafter RW8933 End Cut Blade
Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. High-carbon steel cutting edge for general purpose wood cutting applications. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade for accuracy and long life. For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools.
Dico 584-46900 Tie-On Polishing Bonnet BLADE 1-1/4IN WOOD/NAIL BM 1PK BLADE SCRAPER RIGID PAINT
Tie on Bonnets made of 100 percent lambs wool. Withstands multiple washings and chemicals. Used on heavily soiled surfaces for applying waxes, glazes & compound. For sawing. Bi-Metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. For removal of stubborn paint, adhesive residue, tile adhesive and window putty. Great for cutting carpet and old laminate.
BLADE 1-1/4 WOOD 1-5/8DPTH 1PK Scotch-Brite 9099 Large Paint/Rust Stripper Kit BLADE FLUSH CUT BI-METAL
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 12 teeth per inch. One piece pad/mandrel assembly attaches easily to standard household drill (1/4", 3/8", 1/2") for removing paint from wood and metal surfaces. Features Scotch-Brite abrasive web that will not rust or splinter like wire brushes. Conforms to surface contours and reduces gouging. Use 2-disc on 1 mandrel, or double-wide for longer, tougher jobs. Bi-metal 1-3/8" blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools.
3M 9415 Sanding Disc Tru-Flate 13-101 Coupler/Plug Set Tru-Flate 17-373 Grip Tite Direct Air Line Chuck
Used to turn power drills into a stripper. Attaches to a 3M hook and loop back-up pad for use on flat projects requiring fast removal of surface paint and rust from wood, metal, and plastic. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-125 1/4" Male NPT Plug and No.13-135 1/4" Female NPT Coupler. Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Has a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line. Automatic inflators use direct air line chucks. Works like a ``quick coupler". Snaps onto any standard tire valve and stays put until released.
Mintcraft DZA019 Hose Coupler Set Tru-Flate 13-301 Coupler/Plug Set Sonicrafter RW8929 Bi-Metal End Cut Blade
3 piece 1/4" MPT quick plug; 1 piece 1/4" FPT quick plug; 1 piece 1/4"NPT quick coupler. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-325 1/4" Male NPT Plug and No.13-335 1/4" Female Coupler.  Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
Sonicrafter RW8930 Bi-Metal End Cut Blade Sonicrafter RW8935 End Cut Blade 3M 99261 Resin Bond Power Sanding Belt
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics. Tough, durable aluminum oxide abrasive on resin bond X-weight cloth backing for use on portable or table-top bench sanders. Rental.
Sonicrafter RW8936 End Cut Blade Dremel MM450 Saw Blade Sonicrafter RW8931 Bi-Metal End Cut Blade
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics. Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929. For plunge cutting up to 3/4" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
BLADE 2-1/2 WD 1-5/8 DEPTH 1PK Rotozip CN1 Collet Set BLADE COARSE TOOTH 2 PIECE
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. 12 teeth per inch. High-Carbon steel. Works with all RotoZip spiral saws, and drywall routers. Kit includes 1/8", 5/32", and 1/4" collets and collet nut. 15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4" deep. For use with all brands of Multi-Purpose Oscillating tools.
BLADE SAW SEGMENTED HSS       DeWalt DWA4217 Rigid Oscillating Scraper Blade Stanley-Bostitch BTFP72318  Air Compressor Hose Fittings Plug - Male
For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals, and other soft materials. Use with all brands of multi-purpose oscillating tools. Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Pre-applied sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections.
Stanley-Bostitch BTFP72319  Air Compressor Hose Fittings Plug - Female Stanley UC38-14F Push-to-Connect Auto Hose Adapter Stanley UC38-14M Push-to-Connect Auto Hose Adapter
Pre-applied thread sealant for airtight connections. Simplifies field installation by eliminating the need for thread sealant tape. Plated steel construction with drag guard for jobsite durability and reliability. 6-ball coupler design for balanced, strong and secure connections. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance. Accepts 3/8" series Industrial Interchange or 3/8" Automotive Interchange plugs. Eight Hardened stainless steel locking balls for maximum performance.
WHEEL BUFFING CTN 55PLY6X1/2IN Scotch-Brite 9414 Sanding Disc Tru-Flate 13-435 Air Line Coupler
Cotton buffing wheel with 1/2" (12.7mm) arbor hole. 6" x 1/2" x 55 ply. Spiral sewn stitches every 3/8" (9.52mm). 1/2" (12.7mm) face width. 3,600 maximum rpm. For use on all 6" (152.4mm) buffing and grinding machines. Removes paint and varnish from contoured surfaces. Mounts directly to power drills by inserting the mandrel into a drill chuck. Fits: All Household Drills. Applications: Removing Paints, Varnishes, Rust; Sanding, Polishing & Buffing. 1/4" shaft. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
HOSE AIR END REUSABLE 3/8IN   BLADE 1-1/4IN PRECISION WD 1PK Tru-Flate 13-425 Air Line Coupler
Reusable MNPT anodized aircraft aluminum fitting for Flexzilla and Flexzilla Pro air hose. Spiral bend restrictor increases hose flexibility. These allow quick hose repairs on the job site or create a custom length hose in just three easy steps. For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Available in sleeve type only.
BLADE OSCIL WD CAULK REMOVING BLADE OSCIL SCRAPNG RECT FLUSH Dremel MM610 Flexible Scraper Blade
Tackle tough scraping applications with Dewalt oscillating scraping blades. Crafted from steel for long life and durability. Each blade is compatible with all major oscillating tool brands. Power brushless motor provides 5200 rpm maintaining speed under load. Flexible mushroom style head for light material removal such as paint and rust. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Tackle tough scraping applications with the Dewalt oscillating scraper blade. Crafted from steel for long life and durability. Each blade is compatible with all major oscillating tool brands. Power brushless motor provides 5200 rpm maintaining speed under load. Rigid body for long life. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Universal fit. Serrated edges for easy material removal. Diameter: 0.73". Size: 3". Thickness: 0.73". Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929.
Dremel MM462 Bi-Metal Flush Cut Blade BLADE CAULK KNIFE 2-1/4IN     Dico 585-51103 Tie-On Polishing Bonnet
Used for precise cuts and plunge cuts. Designed for cutting wood, drywall, plastic, and soft metal. Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. 1-1/4" depth of cut. For removing sealant, paint and glue. High-carbon steel edge for removing touch sealants. Tapered design is perfect for tight spaces. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade length: 4.0". Mandrel mounted. Can be mounted on any 3/8" drill. Gives a high gloss finish. Withstands multiple washings. Applications: Final Polish & Waxing. 5-1/2". Boxed.
Tru-Flate 13-537 Air Line Coupler BLADE OSCILL DIAMOND FLUSH CUT Plews/Edelmann 13-603 Hose Coupling
Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Universal fit for use on all major brands. Diamond grit for fast cuts in tough applications. Diameter: 0.73". Size: 3". Thickness: 0.73". Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
Tru-Flate 13-203 Coupler/Plug Kit Plews/Edelmann 13-605 Hose Coupling BLADE 2-1/2IN PRECISION WD 1PK
(1) One Each:  1/4" FPT Coupler (13-235), 1/4" MPT Coupling (21-505), 1/4" MPT Plug (12-225) and 1/4" FPT Plug (12-235). Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch.
BLADE 1-1/4IN WOOD 2-5/8 DEPTH BLADE FLUSH CUT ASSORTMENT    Bostitch Prozhoze Reusable Hose Repair Kit
For sawing. General purpose plunge cuts up to 2-5/8" depth in non-metal materials. High-Carbon steel. 15 teeth per inch. 3/8", 3/4" and 1-1/4" flush cut (e-cut) blades for plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools. Includes 1 mender and 1 threaded end fittings. Simple 3-step process: unscrew, cut and replace. Includes 1mender and 1 threaded end fitting.
Dremel MM600 Rigid Scraper Blade Norton 88245 Type 1 Straight Grinding Wheel Sonicrafter RW8928 Semicircle Saw Blade
Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929. For use on all bench and pedestal mounted grinders for offhand deburring, sharpening, shaping and limited stock removal on all types of material. Telescoping plastic bushings allow the wheel to fit most standard arbor sizes. 3/4" blade thickness. For linear and plunge cutting. Use on thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Semicircle. Universal fit system allow accessory to fit all major brand oscillating tools.
WHEEL GRINDING 60GRT 6X3/4X1IN WHEEL GRINDING 36GRT 6X3/4X1IN WHEEL GRINDING 80GRT 6X3/4X1IN
Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder. Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder. Aluminum oxide wheel. Designed for most stationary bench grinders. For general grinding and sharpening applications on mild steel. Not For Carbide Applications. Wheel size: 6"; Thickness: 3/4"; Arbor: 1"; Maximum rpm 4,100; Tool Type: Bench Grinder.
Tru-Flate 13-613 Air Line Coupler Tru-Flate 13-611 Air Line Coupler Plews 576-25A Air Hose
Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. Protective collar guards against accidental disconnect. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Orange glo, long life engineered composition PVC hose. Spiral reinforced hose for durability. Nonconductive and oil and abrasion resistant; 1/4" NPT brass fittings on both ends.
BLADE 1-1/4 NAIL TITANIUM 1PK Vermont 23457 Hinge Door and Jamb Mortising Template Set BLADE SCRAPER HI-CARBON 2IN
For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. Use the hinge mortising template for mortising door and jamb for 3-1/2" and 4" butt hinges. Includes templates for the two most popular interior and exterior hinge sizes. NOTE: Requires use of 5/8" router guide bushing (not included) For removing sealant, paint and glue. High-carbon steel edge for removing tough sealants, adhesives and paint. Rigid design for scraping applications. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade Length: 4.0".
Bosch Accessories PA1202 Woodrazor Planer Blades Tru-Flate 13-527 Air Coupler BLADE OSCILLATING WOOD FASTCUT
Double-edged blade cannot be resharpened. Resists fractures from accidental nail and staple strikes. For use with Nos.1594, 1594K, 3365 (SKU 621.9976) 3-1/4" planer, 53514, 53518. Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI. Intended for compressed air lines only. 300 PSI maximum rated working pressure. Universal fit for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Easily cut through wood with this oscillating fast cut wood blade. Includes 2 washers. Length: 1-3/4". Size: 1-1/4". Thickness: 0.75".
Dremel MM435 Jab Saw Blade Plews 4-50E-RET Recoil Air Hose Tru-Flate 13-401 Coupler/Plug Set
The fast cutting drywall jab saw offers the ideal solution for cutting drywall with your Multi-Max oscillating tool. Designed to make both straight and curved cuts, the jab saw's offset design and sharpened tip allow plunge cutting with not pilot hole needed. Cuts around electrical boxes and recessed lighting quickly and easily. The blade is newly designed, utilizing Dremel's Universal quick fit interface for compatibility with most oscillating tools. Retains its self-coiling properties and stores itself when finished. Can be used with all air-powered equipment on the job site and in garages, plants and service stations. Swivel end fittings on one side reduce hose twist. Temperature range: 32-degree F to 120-degree F. 200 PSI. Yellow Intended for compressed air lines only. 300 PSI maximum rated working pressure. Includes one each: No.12-425 1/4" Male NPT Plug.  Most easily recognized design. Distinctive, long 3/4" pilot can not be confused with any other designs. No.13-435 1/4" Female Coupler - Due to their large size, do not connect or disconnect if the line pressure exceeds 40 PSI.
HOSE AIR POLY BLUE 1/4INX25FT Sonicrafter RW8924 Finger Rasp Blade with Fit System BLADE CARBIDE FLUSH CUT FINGER
Made of braid reinforced blue polyurethane hose. Lightweight and flexible; features bend restrictors. Stays flexible,-30 to 150 degrees F. 300 PSI. For coarse grinding or rasping and aggressive material removal in small tight areas. Use on wood, hardened adhesives, thin set and masonry. 2.5" Carbide grit finger shaped. Universal fit system allow accessory to fit all major brand oscillating tools. With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Universal fit. Carbide edging for grout removal. Diamond grit for fast cuts in tough applications. Diameter: 0.7". Size: 3". Thickness: 0.7".
RASP CARBIDE TRIANGULAR       SandBlaster 9176 Sanding Disc Kit BLADE 1-1/4IN BI-METAL 1PK
For aggressive material removal of wood, tile adhesives, cement and mortar. For use with all brands of Multi-Purpose oscillating tools. Kit is used to turn a drill into a sander; for use on wood, metal, and plastic. Includes: 5" disc pad and (3) sanding discs one each: 40, 80 and 120 grit. For sawing. Titanium enhanced Bi-metal for longer life cutting in metal and wood applications. 2-1/8" plunge depth. 18 teeth per inch.
BLADE 2-1/2 NAIL TITANIUM 1PK Vermont 23165 Replacement Bearing Set Dewalt DW6658 Planer Blades
For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. Carbide tipped. Includes 3/8", 1/2", 5/8" bearings, hex key, dust shield and screw. Sharpening on both sides allows reversal for longer life. For use with No. DW675K Planer.
Dewalt DW6654 Planer Blades DeWalt DWA4203 Oscillating Blade Tru-Flate 12-537 Air Hose Plug
Reversible carbide straight blades that can be sharpened on both sides for longer life. For use with DW677K, DW680K or DW678K planers. Ideal for cutting wood with nails. Universal fit for use on all major brands (no adapter required). Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
BLADE GROUT REMOVAL 1/8IN     Norton 88240 Type 1 Straight Grinding Wheel BLADE PRECISION 1-3/8IN 1PK
For removing grout from floor or wall tiles for replacement or restoration. Use with all brands of Multi-Purpose Oscillating tools. For use on all bench and pedestal mounted grinders. 3/4" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications. Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.
Dewalt DWA4214 Oscillating Multi Material Blade BLD BI-MTL WD W/NAIL 2-1/2IN  Sonicrafter RW8927 Multi-Function Saw Blade
Multi-material cutting blade is ideal for cutting asphalt shingles. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable for tough jobs. Diamond grit for long life. Applicable Materials: Hardwood with nail. Thickness: 3/4". For linear and plunge cutting on thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Universal fit system allow accessory to fit all major brand oscillating tools.
Plews 554-50A-10 Air Hose COUPLER-PLUG SET 4PC          BLADE 1-3/4IN BI-METAL 1PACK
COUPLER-PLUG SET 4PC
Our Price: $16.36
Quality  multi-purpose air hose. Light weight, flexible, kink-resistant design. 300 PSI. Hi Flo Couplers and Plugs increase air flow to ensure tools will provide maximum torque and optimal performance. Push-to-connect design is made of light-weight T6 aluminum. Includes (1) Female Coupler, (1) Female Plug and (2) Male Plugs. For sawing. Plunge cutting up to 1-5/8" depth. Bi-metal with hardened, titanium-coated teeth for longevity. 18 teeth per inch.
Dremel MM470 Longer Flush Cut Blade Nati 9389 Air Hose 50 ft BLADE UNIV E-CUT 1-1/8IN 1PK
Use for flush cutting doorjamb or windowsill, flooring or tile installation, or squaring off rounded  corners.  High-carbon steel blade for precision wood cutting. May be used on wood, plastic, drywall and other soft materials. 1-11/16" depth of cut. Self storing design springs back into coiled shape. Rugged oil and abrasion resistant polyurethane construction. Leak resistant, 360 degree swivel brass end connectors. Spring bend restrictors prevent kinks near hose end. 1/4" NPT; maximum working pressure at 100 psi. Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.
Dewalt DWA4209 Oscillating Blade BLADE LONG LIFE 1-3/8IN 1PK   BLADE LONG LIFE 2-9/16IN 1PK
Bi-metal oscillating blade is ideal for cutting metal. Titanium coated for long life. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" Width x 2" Length. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. 2-9/16" width x 2" length. Wide shape for maximum cutting performance and long straight cuts.
Sonicrafter RW8923 Triangular Rasp Blade Black & Decker BDA1217 Flush Cut Blade 3M 761D Resin Bond Power Sanding Belt
For coarse grinding or rasping and aggressive material removal over larger areas. Use on wood, hardened adhesives, thin set and masonry. Triangular carbide grit. Universal fit system allow accessory to fit all major brand oscillating tools. Flush cut saw blade for oscillating multi-tool. Used for faster and larger cuts. The 4" width and 270 degree cutting surface provides a larger cutting area. This high carbon steel blade will cut multiple materials such as pvc, wood and drywall. The tool free fit allows users to change accessories quickly. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
Hookit 9173 Sanding Disc Kit BLADE FLUSH CUT TITANUM BI-MTL 3M 761D Resin Bond Power Sanding Belt
Hook and loop system holds disc securely, fits all standard household drills and is reusable; Used for paint, wood, and metal. Includes: 3M Hookit disc pad, 3M Hookit sanding discs. For plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 2-1/4" deep. 5 times the durability of regular bi-metal blades. For use with all brands of Multi-Purpose oscillating tools. Tough, durable Cubitron-based Regalite abrasive on Y-weight cloth backing. Self-sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.
3M 761D Resin Bond Power Sanding Belt Rockwell RW8946 Semi-Circle Fit Sonicrafter Blade Rockwell RW8961 Plunge Cut Blade