Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESORIES > ROUTER ACCESSORIES
Choose a sub category:
ROUTER BITS - 1/4 IN CARBIDE ROUTER BITS - ARBOR TYPE ROUTER BITS 1/2 IN CARBIDE
ROUTER BIT SETS ROUTER ACCESSORIES SPIRAL SAW CUT-OUT BITS
SPIRAL SAW CUT-OUT ACCESSORIES OSCILLATING TOOL BLADES OSCILLATING TOOL ACCESSORIES
PLANER BLADES & ACCESSORIES
Sort By:
1
WHEEL MASONRY CUTTING         Bosch Accessories CH01 Spiral Saw Adapter Kits BLADE PLUNGE HI-CARBON 1-1/4IN
Abrasive material for high performance masonry cutting applications. Cuts a wide range of masonry materials including stone, slate, cement board, bricks, concrete, cement backer board and more. 30 grit, silicon carbide grain. No need for excessive pressure, the tool does the work. Max rpm 20,000/min. Conversion kit allows you to change 1/4" collets to accept 1/8" bits on RotoZip tools. Includes: adapter, hex wrench, guidepoint bit and sabrecut bit. High-carbon steel cutting edge for general purpose wood cutting applications. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade for accuracy and long life.
BLADE FLUSH CUT PRECISION     BLADE SCRAPER 2 PIECE SET     Dewalt DW4853 Bi-Metal Reciprocating Saw Blade Set
Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools. Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools. Combination sets provide a selection of blades with universal shank for common applications.. Set Includes 1 Each: Wood Cutting Blades. DW4802 (6 TPI), DW4806 (10 TPI) and DW4850 (6 TPI).
Freud 60-100 Slot Cutter Arbor Freud 60-102 Slot Cutter Arbor Milwaukee 48-39-0508 Compact Portable Band Saw Blade
Slotting cutter arbors will work with any slotting cutter with a 5/16" arbor. Use on hand held and table mounted portable routers. Slotting cutter arbors will work with any slotting cutter with a 5/16" arbor. Use on hand held and table mounted portable routers. High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
Milwaukee 48-39-0538 Compact Portable Band Saw Blade Milwaukee 48-39-0518 Compact Portable Band Saw Blade Milwaukee 48-39-0528 Compact Portable Band Saw Blade
High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020". High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020". High speed steel teeth deliver maximum durability. Alloy backing steel provides extended blade life. Precision formed teeth create fast, clean cuts. Specs: blade dimensions 35-3/8"x1/2"x.020".
BLADE FLUSH CUT WIDE          BLADE SCRAPER FLAT PAINT/CAULK BLADE 3/8INCH WOOD 1-5/8 DEPTH
For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. Use with all brands of multi-purpose oscillating tools. For removal of stubborn caulk, paint, adhesive residue, tile adhesive and window putty. For sawing. Detailed plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 16 teeth per inch.
Sonicrafter RW8921 Rigid Scraper Blade with Fit System Sonicrafter RW8922 Rigid Scraper Blade with Fit System Milwaukee 48-39-0510 Deep Cut Portable Bi-Metal Band Saw Blade
For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools. For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools. Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 3/16" to 5/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
Milwaukee 48-39-0520 Deep Cut Portable Bi-Metal Band Saw Blade Milwaukee 48-39-0500 Deep Cut Portable Bi-Metal Band Saw Blade Milwaukee 48-39-0560 Deep Cut Portable Bi-Metal Band Saw Blade
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. For cutting stock 5/32" to 3/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 5/16" to 1/2" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Matrix II speed steel teeth with 8 percent cobalt. Varying set angles and gullet depths break up harmonic vibrations generated in cutting. Designed for interrupted cutting applications (tubing, structurals, etc.). Also production cutting of solids in a variety of sizes or shapes. Rental.
CUTTER SEALANT TAPERED 3 INCH Dremel MM450 Saw Blade Sonicrafter RW8932 Multi-Function End Cut Blade
For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3" deep. For use with all brands of Multi-Purpose oscillating tools. Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929. For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
Sonicrafter RW8933 End Cut Blade BLADE 1-1/4IN WOOD/NAIL BM 1PK BLADE SCRAPER RIGID PAINT
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. For sawing. Bi-Metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. For removal of stubborn paint, adhesive residue, tile adhesive and window putty. Great for cutting carpet and old laminate.
BLADE 1-1/4 WOOD 1-5/8DPTH 1PK BLADE FLUSH CUT BI-METAL      Sonicrafter RW8929 Bi-Metal End Cut Blade
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 12 teeth per inch. Bi-metal 1-3/8" blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools. For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
Sonicrafter RW8930 Bi-Metal End Cut Blade Sonicrafter RW8935 End Cut Blade Sonicrafter RW8936 End Cut Blade
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
DeWalt DWA4217 Rigid Oscillating Scraper Blade BLADE 2-1/2 WD 1-5/8 DEPTH 1PK Rotozip CN1 Collet Set
Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. 12 teeth per inch. High-Carbon steel. Works with all RotoZip spiral saws, and drywall routers. Kit includes 1/8", 5/32", and 1/4" collets and collet nut.
Sonicrafter RW8931 Bi-Metal End Cut Blade Dremel MM610 Flexible Scraper Blade Dremel MM462 Bi-Metal Flush Cut Blade
For plunge cutting up to 3/4" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929. Used for precise cuts and plunge cuts. Designed for cutting wood, drywall, plastic, and soft metal. Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. 1-1/4" depth of cut.
BLADE CAULK KNIFE 2-1/4IN     BLADE COARSE TOOTH 2 PIECE    BLADE SAW SEGMENTED HSS
For removing sealant, paint and glue. High-carbon steel edge for removing touch sealants. Tapered design is perfect for tight spaces. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade length: 4.0". 15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4" deep. For use with all brands of Multi-Purpose Oscillating tools. For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals, and other soft materials. Use with all brands of multi-purpose oscillating tools.
BLADE OSCIL WD CAULK REMOVING BLADE OSCIL SCRAPNG RECT FLUSH BLADE 1-1/4IN PRECISION WD 1PK
Tackle tough scraping applications with Dewalt oscillating scraping blades. Crafted from steel for long life and durability. Each blade is compatible with all major oscillating tool brands. Power brushless motor provides 5200 rpm maintaining speed under load. Flexible mushroom style head for light material removal such as paint and rust. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Tackle tough scraping applications with the Dewalt oscillating scraper blade. Crafted from steel for long life and durability. Each blade is compatible with all major oscillating tool brands. Power brushless motor provides 5200 rpm maintaining speed under load. Rigid body for long life. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Universal fit. Serrated edges for easy material removal. Diameter: 0.73". Size: 3". Thickness: 0.73". For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch.
Dremel MM600 Rigid Scraper Blade Blackstone HB71864BL Horizontal Bi-Metal Band Saw Blade Blackstone HB71764BL Horizontal Band Saw Blade
Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929. For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Hard Back blades permit greater tension, improved blade rigidity and straighter, more accurate cuts. Wavy Tooth Style has three teeth with varying sets to the right followed by one straight tooth and three teeth with varying sets to the left. Because three teeth share the cutting and the set extends below the gullets, wavy set teeth are less likely to strip than raker set teeth. For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Hard Back blades permit greater tension, improved blade rigidity and straighter, more accurate cuts. Wavy Tooth Style has three teeth with varying sets to the right followed by one straight tooth and three teeth with varying sets to the left. Because three teeth share the cutting and the set extends below the gullets, wavy set teeth are less likely to strip than raker set teeth.
BLADE OSCILL DIAMOND FLUSH CUT Spyder 720001 Flexible Oscillating Scraper BLADE SCRAPER HI-CARBON 2IN
With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Universal fit for use on all major brands. Diamond grit for fast cuts in tough applications. Diameter: 0.73". Size: 3". Thickness: 0.73". Spyder Oscillating Scraper, Flexible, 1-49/64 in, 3-37/64 in Length, Steel, For Soft Materials, Silicon Joints, Soft Compounds and Stickers For removing sealant, paint and glue. High-carbon steel edge for removing tough sealants, adhesives and paint. Rigid design for scraping applications. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade Length: 4.0".
BLADE 2-1/2IN PRECISION WD 1PK BLADE 1-1/4IN WOOD 2-5/8 DEPTH BLADE FLUSH CUT ASSORTMENT
For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch. For sawing. General purpose plunge cuts up to 2-5/8" depth in non-metal materials. High-Carbon steel. 15 teeth per inch. 3/8", 3/4" and 1-1/4" flush cut (e-cut) blades for plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16" deep. For use with all brands of multi-purpose oscillating tools.
Vermont 23457 Hinge Door and Jamb Mortising Template Set Milwaukee FB23193DB Band Saw Blade Milwaukee FB10093DB Flexible Back Band Saw Blade
Use the hinge mortising template for mortising door and jamb for 3-1/2" and 4" butt hinges. Includes templates for the two most popular interior and exterior hinge sizes. NOTE: Requires use of 5/8" router guide bushing (not included) For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws. For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.
Sonicrafter RW8928 Semicircle Saw Blade BLADE 1-1/4 NAIL TITANIUM 1PK BLADE CARBIDE FLUSH CUT FINGER
For linear and plunge cutting. Use on thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Semicircle. Universal fit system allow accessory to fit all major brand oscillating tools. For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Universal fit. Carbide edging for grout removal. Diamond grit for fast cuts in tough applications. Diameter: 0.7". Size: 3". Thickness: 0.7".
Dremel MM470 Longer Flush Cut Blade BLADE PRECISION 1-3/8IN 1PK   Dewalt DWA4214 Oscillating Multi Material Blade
Use for flush cutting doorjamb or windowsill, flooring or tile installation, or squaring off rounded  corners.  High-carbon steel blade for precision wood cutting. May be used on wood, plastic, drywall and other soft materials. 1-11/16" depth of cut. Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts. Multi-material cutting blade is ideal for cutting asphalt shingles. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
Dremel MM435 Jab Saw Blade Freud DS006S Diablo Reciprocating Saw Blade Sets BLADE 1-1/4IN BI-METAL 1PK
The fast cutting drywall jab saw offers the ideal solution for cutting drywall with your Multi-Max oscillating tool. Designed to make both straight and curved cuts, the jab saw's offset design and sharpened tip allow plunge cutting with not pilot hole needed. Cuts around electrical boxes and recessed lighting quickly and easily. The blade is newly designed, utilizing Dremel's Universal quick fit interface for compatibility with most oscillating tools. Contains one 6" metal demolition 1/8" to 1/2" blade, two 6" metal cutting 3/32" to 5/16" blades, two 6" nail embedded wood blades and one 9" nail embedded wood blade. Free storage case included. For sawing. Titanium enhanced Bi-metal for longer life cutting in metal and wood applications. 2-1/8" plunge depth. 18 teeth per inch.
BLADE 2-1/2 NAIL TITANIUM 1PK BLADE OSCILLATING WOOD FASTCUT Vermont 23165 Replacement Bearing Set
For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. Universal fit for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Easily cut through wood with this oscillating fast cut wood blade. Includes 2 washers. Length: 1-3/4". Size: 1-1/4". Thickness: 0.75". Carbide tipped. Includes 3/8", 1/2", 5/8" bearings, hex key, dust shield and screw.
Irwin 4935496 Bi-Metal Reciprocating Saw Blade Set BLADE UNIV E-CUT 1-1/8IN 1PK  BLADE GROUT REMOVAL 1/8IN
Blades are Bi-Metal, with a long cutting life; used for fast cuts and most popular cutting applications. Includes (1) each: 9" 6 TPI, nail embedded wood cutting blade, (5) 6" 6 TPI nail embedded wood cutting blades, (1) 8" 18 TPI metal cutting blade and (4) 6" 14 TPI, metal cutting blades and blade bag. Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal. For removing grout from floor or wall tiles for replacement or restoration. Use with all brands of Multi-Purpose Oscillating tools.
BLADE LONG LIFE 1-3/8IN 1PK   BLADE LONG LIFE 2-9/16IN 1PK  BLADE PLUNGE CUT CARBIDE 3/4IN
Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" Width x 2" Length. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. 2-9/16" width x 2" length. Wide shape for maximum cutting performance and long straight cuts. For cutting iron bar, black pipe, metal (nails and staples), wood with nails, drywall and ceramic. Carbide teeth for high performance in metal and other materials. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125".
BLADE 1-3/4IN BI-METAL 1PACK  Sonicrafter RW8927 Multi-Function Saw Blade BLADE PLUNGE BI-METAL 1-1/4IN
For sawing. Plunge cutting up to 1-5/8" depth. Bi-metal with hardened, titanium-coated teeth for longevity. 18 teeth per inch. For linear and plunge cutting on thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Universal fit system allow accessory to fit all major brand oscillating tools. For cutting wood, wood with nails, drywall, pvc, metal (nails and staples). Bi-metal cutting edge for all-purpose applications including wood with nails. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125".
BLADE SCRAPER RIDGID          BLADE UNIV E-CUT 1-3/4IN 1PK  BLADE STD E-CUT 1-3/8IN 1PK
Short version. For removal of stubborn paint, adhesive residue, carpet, tile, adhesive and under seal. Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal. Set teeth for all woods, plasterboard and plastic materials, very clean cuts and good cutting speed. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" width x 2" length.
DeWalt DWA4203 Oscillating Blade BLADE PLUNGE BI-METAL 1-1/4IN Milwaukee FB08593DB Flexible Back Band Saw Blade
Ideal for cutting wood with nails. Universal fit for use on all major brands (no adapter required). High carbon steel cutting edge for general purpose wood applications. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade size: 1-1/4". For cutting wood, hardwood and laminate. For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.
BLD BI-MTL WD W/NAIL 2-1/2IN  BLADE FLUSH CUT TITANUM BI-MTL Rockwell RW8946 Semi-Circle Fit Sonicrafter Blade
Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable for tough jobs. Diamond grit for long life. Applicable Materials: Hardwood with nail. Thickness: 3/4". For plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 2-1/4" deep. 5 times the durability of regular bi-metal blades. For use with all brands of Multi-Purpose oscillating tools. Oscillating saw blade. Universal fit system adapts to other brands. 3-1/8" carbide grit for oscillating tools. Use to remove grout, porous concrete and masonry. Semi-circle shape with flat side allow for easy access into corners and flush against adjoining surfaces.
Rockwell RW8961 Plunge Cut Blade Rockwell RW8948 Plunge Cut Blade Rockwell RW8962 Plunge Cut Blade
For wide plunge cuts up to 1-5/8" depth in wood, plastic, fiberglass, drywall, nails, non-ferrous metals, thin sheet metal and hardened fillers. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools. For aggressive plunge cutting up to 1-5/8" depth in wood, plastic, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Precision ground, beveled tooth design. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools. For wide, aggressive plunge cutting up to 1-5/8" in wood, plastic, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Precision ground, beveled tooth design. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools.
Rockwell RW8958 Plunge and Saw Blade Rockwell RW8960 Plunge and Sanding Blade BLADE PRECISION 2-9/16IN 1PK
High speed steel oscillating tool blade. Efficient hybrid design for precise cutting and sawing in non-metal materials. Cuts plastic, PVC, wood and drywall materials. Universal accessory fits all tools. High speed steel oscillating tool blade. For aggressive plunge cutting up 1-5/8" depth into wood, drywall and soft plastics. The precision ground, beveled tooth design. Abrasive surface on the backside allows for sanding/finishing rough cuts. Universal accessory fits all tools. Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts.
BLADE SET SAWZALL DEMOLITN 5PC Dewalt DW4856 Bi-Metal Reciprocating Saw Blade Set BLADE PLUNGE BI-METAL 2-1/2IN
5 piece Demolition Sawzall Blade set includes one each: 9" 5 TPI The Ax SAWZALL Blade, 9" 8 TPI The Wrecker SAWZALL Blade, 6" 14 TPI The Torch SAWZALL Blade, 6" 18 TPI The Torch SAWZALL Blade, 9" 14 TPI The Torch SAWZALLBlade. Combination sets provide a selection of blades with universal shank for common applications. Set Includes 1 Each: Wood Cutting Blades, DW4802 (6TPI), DW4847 (5/8TPI), DW4806 (10TPI); 1 Each Metal Cutting Blades:  DW4808 (14TPI), DW4811 (18TPI) & DW4813 (24TPI). For cutting wood, wood with nails, drywall, pvc, metal (nails and staples). Bi-metal cutting edge for all-purpose applications including wood with nails. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade Thickness: 0.125"; Blade Length: 4.0".
Rockwell RW8957 Fit Serrated Slicer and Scraper Black & Decker BDA1217 Flush Cut Blade Dremel MM485 Oscillating Flush Cut Blade
High speed oscillating tool blade. For slicing, ripping, or scraping soft materials and hardened adhesives. Universal accessory fits all tools. Flush cut saw blade for oscillating multi-tool. Used for faster and larger cuts. The 4" width and 270 degree cutting surface provides a larger cutting area. This high carbon steel blade will cut multiple materials such as pvc, wood and drywall. The tool free fit allows users to change accessories quickly. Flush cutting blade with high performance carbide teeth for longer life. Users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more. It's wide 1-1/4" blade speeds through long cuts and can make plunge cuts up to 1-11/16" deep. Universal Quick Fit system allows this blade to fit nearly every oscillating tool on the market.
BLADE PLUNGE BI-METAL 2-1/2IN Spyder 900305 Reciprocating Saw Blade Starter Kit BLADE PLUS E-CUT 1-3/8IN 1PK
Bi-metal blade with xtra-clean cutting edge for clean cuts in hard wood, cutting wood and laminate. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade Thickness:  0.125". Blade Length: 4.0" Fits all reciprocating saws. Includes one of each: 1/16"+ Spyder Grout-Out with carbide grit edge and for joints 1/16 -3/16"; 2" Spyder Scraper for tough materials and precision scraping; and 6" 10/14 (general/metal) Spyder Bore-Blade use to plunge and cut forward and backward. Set teeth for all woods, plasterboard and plastic materials. Very clean cuts and good cutting speed. Wide shape for maximum performance and long straight cuts. 2-9/16" width x 2" length.
Spyder 700001 Offset Oscillating Saw Blade Dewalt DWA4207 Fastcut Oscillating Blade Dewalt DWA4212 Oscillating Flush Cut Blade
Spyder Oscillating Saw Blade, Universal Offset, Series: 700001, Medium, Bi-Metal, Applicable Materials: Wood, Wood with Nails, Drywall Plastic, Non-Ferrous Metals and Fiberglass Fast wood cutting oscillating blade. Universal fit is compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Bi-metal material for increased life. Universal fit for use on all major brands (no adapter required).
BLADE HSS SEGMENT  3-3/8IN 1PK Milwaukee 48-39-0572 Portable Sub-Compact Band Saw Blade Dewalt DWA4209 Oscillating Blade
Solid HSS saw blade with metal toothing for sheet metal up to approximately 1/16". Also for plastics, wood, glazing, compound, brass and bronze. Clean, narrow cutting line. Ideal cutting speed. Segmented, for working in corners and on edges without over cut. 3-3/8" blade diameter. Designed to maximize performance of the saw blade. Deliver long tooth life with exceptional durability in metal cutting applications, including strut, conduit, angle iron, copper tube, threaded rod and pipe. Tooth form, pitch and set have been designed to deliver straight, accurate cuts across a broad range of materials. For cutting common materials 5/32" - 3/16" thick and very hard materials 3/16" - 5/16" thick. Blade dimensions: 27" x 1/2" x .020" Bi-metal oscillating blade is ideal for cutting metal. Titanium coated for long life. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
Freud 56-108 3-Wing Slotting Cutter Router Bit Freud 56-112 3-Wing Slotting Cutter Router Bit BLADE 2IN 90DEG 1IN DEPTH 1PK
Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood. Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood. For sawing. Ideal for hard to reach applications such as cabinet toe kicks to remove flooring. 1" cutting depth. Bi-Metal Material.
BLADE PRECISION TOOTH 2-1/2IN Milwaukee 48-39-0521 Deep Cut Portable Bi-Metal Band Saw Blade Milwaukee 48-39-0501 Deep Cut Portable Bi-Metal Band Saw Blade
Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Diamond grit for long life. Applicable materials: Wood and mold. Black finish. Thickness: 0.7". Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. For cutting stock 5/32" to 3/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 5/16" to 1/2" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.
Milwaukee 48-39-0511 Deep Cut Portable Bi-Metal Band Saw Blade Milwaukee 48-39-0531 Deep Cut Portable Bi-Metal Band Saw Blade BLADE PLUNGE CARBIDE 1-1/4IN
Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 3/16" to 5/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. For cutting stock up to 5/32" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. For cutting iron bar, black pipe, metal (nails and staples), wood with nails, drywall and ceramic. Carbide teeth for high performance in metal and other materials. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125".
Dremel MM500 Grout Blade Dremel MM501 Grout Blade Dewalt DWA4204 Oscillating Blade
Grout blade is is able to remove all grout up to the surface of a wall or corner in repair, remodeling and restoration work. Blade is 2-1/2". Use with 122.5929. Grout blade is is able to remove all grout up to the surface of a wall or corner in repair, remodeling and restoration work. Blade is 2-1/2". Use with 122.5929. General purpose use bi-metal oscillating blade. Titanium coated for long life. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
BLD BI-MTL TTNM TEETH 2-1/2IN BLADE PRECISION TOOTH 1-1/4IN Hackzall M12 49-22-0220 Bi-Metal Reciprocating Saw Blade Set
Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable for tough jobs. Diamond grit for long life. Applicable Materials: Hardwood with nail. Thickness: 3/4". Black/Titanium Coated Finish. Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Diamond grit for long life. Applicable materials: Hardwood with nails. Black finish. Thickness: 0.7". Thin kerf for up to 35 percent more cuts per charge.  Short blade length for cutting in tight locations. Bi-metal construction for increased tooth durability and long blade life. Set Includes:  (2) Wood Blades, (3) EMT Blades, (2) Duct Blades, (3) PVC Blades, & Storage Pouch.
Sonicrafter RW8932.3 End Cut Blade Sawzal 49-22-1145 Bi-Metal Reciprocating Saw Blade Set BLADE PLUNGE CARBIDE 1-3/4IN
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8". Sawzall blade set features an assortment of standard wood and metal cutting blades for a broad range of professional applications. The set includes two 6'' wood cutting blades for increased control, one 9'' wood cutting blade for greater cutting capacity, three 6'' 14 TPI blades for medium to thick metal cutting and three 6'' 24 TPI blades for thin metal cutting. The set also includes and innovative job site durable case for convenient blade storage. Includes: (3) 6'' 24 TPI blades, (3) 6'' 14 TPI blades, (2) 6'' 6 TPI blades, (1) 9'' 6 TPI blade and (1) storage container. For cutting iron bar, black pipe, metal (nails and staples), wood with nails, drywall and ceramic. Carbide teeth for high performance in metal and other materials. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125".
Rockwell RW8954 Semi-Circle Saw Blade Dewalt DWA4211 Semi-Circle Oscillating Blade Spyder 700002 Wide Offset Oscillating Saw Blade
For linear, plunge and flush cuts in a variety of materials such as thin wood, plastic, drywall, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Bi-metal with hardened teeth to cut non-ferrous metals. Universal accessory fits all tools. Bi-metal oscillating blade general purpose blade. Titanium coated for long life. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Spyder Oscillating Saw Blade, Universal Wide Offset, Series: 700002, Medium, Bi-Metal, Applicable Materials: Wood, Wood with Nails, Drywall Plastic, Non-Ferrous Metals and Fiberglass
Sawzal 49-22-0240P Bi-Metal Reciprocating Saw Blade Set BLADE TRIANGULAR CARBIDE      BLADE 2-1/2IN SEGMENT CARBIDE
Features an assortment of standard wood and Ice Hardened metal cutting Sawzall blades for a broad range of professional applications. Set includes two 6" wood cutting blades for increased control, two 9" wood cutting blades for greater cutting capacity, two 6" 14TPI blades for medium to thick metal cutting and two 6" 18 TPI blades for thin metal cutting. Set also includes a roll-up pouch for convenient blade storage. For grinding. For quick sanding of mortar under broken tiles, concrete, stone and woods. Max-Fusion carbide. For grinding purpose. Use for grout removal and cutting grooves in plaster and porous concrete. Kerf up to 1/32". Max-Fusion carbide.
BLADE 3-1/8IN SEGMENT HSS 1PK Blackstone BM82164BL Horizontal Band Saw Blade Dewalt DWA4213 Oscillating Flush Cut Blade
For sawing purpose. Ideal for cutting wood, fiberglass and sheet metal. Titanium high-speed steel. 18 teeth per inch. For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Variable Pitch Teeth vary in size, set and gullet depth which brings teeth into the work at constantly changing angles for fast, smooth and quiet cutting. The varying gullet sizes allow increased protection against tooth strippage when cutting on a wide range of materials and/or dimensions. Bi-metal oscillating flush cut blade. Titanium coated for long life. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
Dremel MM482 Oscillating Flush Cut Blade Dremel MM480 Oscillating Flush Cut Blade Dewalt DWA4220 Oscillating Carbide? Grout? Removal Blade
Wood and metal flush cut blade is ideal for cutting doorjambs and baseboards for flooring installation. Used for precise cuts and plunge cuts. Wide 1-1/4" blade speeds through long cuts and can make plunge cuts up to 1-5/8" deep. Designed for cutting wood, drywall, plastic and soft metal like copper and 6d-8d finishing nails. The blade's tooth pattern is similar to a standard hacksaw blade. High carbon steel blade material for high performance wood cutting applications. Quick Fit system for fast accessory changes. Allows cutting the width of a 2 x 4. Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. May be used on wood, plastic, drywall and other soft materials. 1-5/8" depth of cut. 1.25" width. Carbide oscillating blade for fast grout removal. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
Sonicrafter RW8926 Semicircle Saw Blade Blackstone BM82264BL Horizontal Bi-Metal Band Saw Blade BLADE RECIP SAW W/CS 8PC
BLADE RECIP SAW W/CS 8PC
Our Price: $26.83
Diamond coated semicircle saw blade. For removing grout, cutting and shaping plaster, porous concrete and masonry, scoring and cutting for precise fit. Universal fit system allow accessory to fit all major brand oscillating tools. For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Variable Pitch Teeth vary in size, set and gullet depth which brings teeth into the work at constantly changing angles for fast, smooth and quiet cutting. The varying gullet sizes allow increased protection against tooth strippage when cutting on a wide range of materials and/or dimensions. Breakaway feature allows for full blade use, without compromising the integrity of the blades. 14/18 TPI variable tooth pattern for optimized cuts in a variety of metal applications. Combination sets provide a selection of Breakaway blades for common applications. Thick kerf blade design for durability. Straight backed blades are used for cutting straight edges. Expandable Tough Case holds blades and is designed to fit in power tool kit box. Bi-metal blades feature a toothed edge made from high speed steel attached to a flexible steel backing through an electron beam welding process. This configuration results in a blade that makes precise cuts while resisting breakage. The cutting surface of a toothed edge is composed of a row of pointed teeth. Flat head, 1"W x 0.04" Thick blade. Includes: (6) 6", (2) 9" Breakaway reciprocating saw blade and expandable Tough Case.
Sonicrafter RW8930.3 Bi-Metal End Cut Blade Sonicrafter RW8929.3 Bi-Metal End Cut Blade Sonicrafter RW8935.3 End Cut Blade
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
BLADE 1-1/4IN WOOD/NAIL BM 3PK BLADE 1-1/4IN WD 1-5/8DPTH 3PK Sonicrafter RW8936.3 End Cut Blade
For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 12 teeth per inch. For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. High-Carbon steel. 12 teeth per inch. Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
BLADE E-CUT PLUS COMBO SET    Dremel MM430 Multi Knife Hook Blade BLADE OSCILL CARBIDE 1-3/8IN
Selection of the 3 most popular Fein E-Cut saw blades for universal use. Ready for any sawing job. Combo includes: (1) E-Cut long life saw blade 1-3/8" and 2-9/16" wide and (1) E -Cut universal saw blade 1-3/4" wide. The ideal solution for cutting flexible materials with your Multi-Max oscillating tool. Designed to cut when being pulled or pushed. Unique, hooked blade design allows one-handed cutting. Makes quick cuts in a variety of material. Makes cuts in difficult to cut, flexible materials. Use on carpet, vinyl flooring, asphalt roofing shingles, cardboard, foam insulation and plastic. Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Diamond grit for long life. Plunge cuts through plaster, light brick and grout. Thickness: 0.7".
RECIP BLADE KIT W/CASE 6 PC   Dewalt DWA4221 Oscillating Carbide? Rasp Artu 1800 Reciprocating Saw Blade Set
Bi-metal reciprocating saw blade set with telescoping case. Combination set provides a selection of blades for common applications. Expandable case holds blades and is designed to fit in power tool kit box. Carbide oscillating rasp for mortar and grout removal. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. Gritted blade fits all reciprocating saws.  Resistant to heat and abrasion, never needs resharpening. Applications:  Cuts Brick, Cast Iron Pipe, Ceramic Tile, Composites, Fiberglass, Flagstone/Slate, Hardwood, Laminates, Marble, Plaster, Plywood, PVC, Reinforced Cement. Set Includes 1 Each: medium grit, 3/4" Wide: No.1810, 6", 152mm, No.01818, 9", 229 mm, No.1822, 12" 305mm.
BLADE RECIP SAW SET 8PC       Freud DS0014S Diablo Reciprocating Saw Blade Sets BLADE 1-1/4IN PRECISION WD 3PK
Engineered to maximize run time. High speed steel teeth for long life and durability. Includes: (2) 6" and (2) 9" wood cutting blades, (2) 6" and (2) 8" metal cutting blades, and (1) blade storage case. Contains four 6" metal cutting 3/32" to 5/16" blades, four 6" nail embedded wood and metal blades, four 6" nail embedded wood blades, one 9" nail embedded wood blade and one 9" flush cut nail embedded wood and metal blade. Free storage case included. For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch.
BLADE 2-1/2 WD 1-5/8 DEPTH 3PK BLADE 4IN ROUND HSS 1PACK     BLADE 1-1/4 NAIL TITANIUM 3PK
For sawing. General purpose plunge cuts up to 1-5/8" depth in non-metal materials. 12 teeth per inch. High-Carbon steel. For long, straight cuts and cutting out installed parquet, laminate flooring and wall paneling. High-Speed steel. 12 teeth per inch. For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch.
DeWalt DWA4215 Oscillating Blade Set BLADE SEGMENTED BI-MTL 4IN    Dewalt DW4890 Bi-Metal Reciprocating Saw Blade Set
Oscillating blade assortment. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands. For cutting wood, wood with nails, drywall, pvc and metal (nails and staples). Bi-metal cutting edge for all-purpose applications. Segmented cutting edge, perfect for straight or flush cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS, compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade length: 3.0". Combination sets provide a selection of 6" blades  with universal shank. Applications: Cuts Rough Wood , Medium  & Thick Metal Metal.  Set Includes: (5) DW4802, (5) DW4808, (5), DW4811. Tough Case Provides Convenient Storage.
Freud 62-XXX Assortment Ball Bearing Set MK Morse RBKITGP01 Bi-Metal Reciprocating Saw Blade Set Lenox 121439KPE Reciprocating Saw Blade Set
Lubricated with a high temperature lubricant able to withstand the stresses of turning at 22,000 RPMS. Use for repairing and altering the profile of Freud router bits. Will fit most brands of router bits. Contains 1 each of: No. 62-100, 1/8" inside diameter. 3/8" bearing diameter, 5/32" bearing height. No. 62-102, 3/16" inside diameter, 3/8" bearing diameter, 1/8" bearing height. No. 62-104, 3/16" inside diameter, 1/2" bearing diameter, 3/16" bearing height. No. 62-108, 8mm inside diameter, 22mm bearing diameter, 7mm bearing height. Includes (5) 6" 18 TPI metal cutting blades; (2) 8" 14 TPI metal cutting blades; (6) 6" 6 TPI wood, wood/nail blades; (2) 8" 10/14 TPI metal, wood/nails blades; (2) 9" 6 TPI wood/wood nail blades and storage case. Tooth design delivers longer blade life and enables faster cutting in the widest array of cutting applications. Shatter resistant, bi-metal design provides flexibility and durability. Includes two each: 656R, 624R, 818R, 810R and one 960R. Comes with convenient storage case.
Sawzal 49-22-1129 Bi-Metal Reciprocating Saw Blade Set MK Morse RBKITHD01 Bi-Metal Reciprocating Saw Blade Set Dewalt DW4892 Bi-Metal Reciprocating Saw Blade Set
Features 12 of Milwaukee's most popular demolition blades. Kit includes 2 of each: No.48-00-5021 5/8 TPI, 6" Length, No.48-00-5026 5/8 TPI, 9" Length, No.48-00-5701 8 TPI, 6" Length, No.48-00-5787 14TPI, 9" Length. 4 each: No.48-00-5782 14 TPI, 6" Length and a canvas pouch for storing blades between use. Includes (4) 6" 18 TPI Master Colbalt metal cutting; (2) 9" 14 TPI Master Cobalt metal cutting; (2) 6" 10 TPI Real McRipper Demolition; (2) 9" 10 TPI Real McRipper Demolition; (2) 6" 14 TPI Fire & Rescue blades, and a storage case. Includes (3) DW4802, Bi-Metal, 6", 6TPI, (2) DW4811, Bi-Metal 6", 18 TPI, (3) DW4809, Bi-Metal, 8", 14 TPI, (3) DW4803, Bi-Metal, 9", 6 TPI, (1) DW4865, 9", 10 TPI, Demolition Blade, (1) Tough case.
BLADE CARBIDE SEGMENTED 1PK   BLADE 2-1/2IN PRECISION WD 3PK BLADE 1-1/4IN BI-METAL 3PK
For removal of defective tile grout. Also for cutting slots in plaster, porous concrete and similar construction materials and for cleaning and reworking planked deck joints. Not suitable for very hard epoxy or cement grouts. The economical alternative to diamond blades. Ideal for working in corners and on edges without over cut. Kerf approximately 3/32". For sawing. Japanese teeth for precision cutting in hardwoods up to 1-5/8" depth. High-Carbon steel. 14 teeth per inch. For sawing. Titanium enhanced Bi-metal for longer life cutting in metal and wood applications. 2-1/8" plunge depth. 18 teeth per inch.
BLADE 2-1/2 NAIL TITANIUM 3PK BLADE VARIETY TITANIUM 3PACK  BLADE 1-1/4 WOOD 2-5/8DPTH 3PK
For sawing. Titanium enhanced Bi-metal for longer life cutting in wood with nail applications. 1-5/8" plunge depth. 18 teeth per inch. For sawing purpose. For plunge cuts up to 1-5/8" deep. Includes titanium-coated, bi-metal blades with precision enhanced toothing for wood cutting and aggressive toothing for metal and nail cutting. For sawing. General purpose plunge cuts up to 2-5/8" depth in non-metal materials. High-Carbon steel. 15 teeth per inch.
BLADE PLUNGE BI-MTL 1-1/4 3PK Dremel MM485B Oscillating Flush Cut Blade BLADE PLUNGE BI-MTL 1-1/4 3PK
For cutting wood, wood with nails, drywall, pvc, metal (nails and staples). Bi-metal cutting edge for all-purpose applications including wood with nails. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance, also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125". Flush cutting blade with high performance carbide teeth for longer life. Users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more. It's wide 1-1/4" blade speeds through long cuts and can make plunge cuts up to 1-11/16" deep. Universal Quick Fit system allows this blade to fit nearly every oscillating tool on the market. Bi-metal blade with xtra-clean cutting edge for clean cuts in hard wood, cutting wood and laminate. Curved Tec blade design for greater control and smooth, precise plunge cuts. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade Thickness:  0.125". Blade Length: 4.0"
BLADE 1-3/4IN BI-METAL 3PACK  BLADE PRECISION 1-3/8IN 3PK   BLADE GROUT HYBRID 2-3/4IN
For sawing. Plunge cutting up to 1-5/8" depth. Bi-metal with hardened, titanium-coated teeth for longevity. 18 teeth per inch. Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts. For grout removal and thinset removal. Premium carbide grit coating for long life in grout and tile applications. Hybrid teardrop design for use in both grinding and rasping. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. Blade thickness: 0.125"; Blade length: 2.75".
BLADE LONG LIFE 1-3/8IN 3PK   Porter-Cable 59370 Door Hinge Template BLADE SAW RECIPROCATING 13PC
Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" Width x 2" Length. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. For mortising of 3", 3-1/2" and 4" square and 5/8" radius and 4-1/2" square hinges on doors and door jambs. Includes high-speed steel router bit No.43670. Engineered to maximize runtime. 4/6 and 14/18 tooth pattern for fast cuts. High speed steel teeth for long life and durability. Includes 6" and 9" wood cutting blades, 6" and 8" metal cutting blades and a blade storage case.
BLADE PRECISION 2-9/16IN 3PK  BLADE LONG LIFE 2-9/16IN 3PK  BLADE UNIV E-CUT 1-3/4IN 3PK
Double-row Japanese toothing for all wood materials, plasterboard and soft plastics. For fast work progress and maximum precision. Extra wide shape for maximum cutting performance and long straight cuts. Bi-metal with teeth set for all woods, plasterboard and plastic materials. Very clean cut and excellent work progress. Extremely robust, unaffected by nails in wood (up to approximately 3/16" diam.), masonry, etc. 2-9/16" width x 2" length. Wide shape for maximum cutting performance and long straight cuts. Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.
BLADE STD E-CUT 1-3/8IN 3PK   BLADE PLUS E-CUT 2-9/16IN 3PK BLADE UNIV E-CUT 1-1/8IN 3PK
Set teeth for all woods, plasterboard and plastic materials, very clean cuts and good cutting speed. Medium width, waisted shape for optimal cutting speed and good swarf removal. 1-3/8" width x 2" length. Set teeth for all woods, plasterboard and plastic materials. Very clean cuts and good cutting speed. Wide shape for maximum performance and long straight cuts. 2-9/16" width x 2" length. Bi-metal with wavy universal toothing. Broad application spectrum for sheet metal up to 1/16", aluminum profile, copper pipes, wood, plasterboard and plastics. Wide, waisted shape for optimal cutting speed and good swarf removal.
BLADE PRECSN TOOTH 3PK 1-1/4IN BLADE RECIP CARBIDE SET 5PC   BLADE PRECSN TOOTH 3PK 2-1/2IN
Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use with all major oscillating tool brands. Durable enough to tackle tough jobs. Diamond grit for long life. Applicable materials: Wood and trim. Black finish. Thickness: 0.7". High performance carbide for greater durability and cutting performance in medium metal. Unique plunge tip design enables faster and easier plunging. 50 times longer cutting life versus standard bi-metal reciprocating saw blades. 1" demolition body delivers straighter cuts with less vibration. Perma-Shield coating protects blades from heat, gumming and corrosion. For nail embedded wood and metal demolition. The set includes: (2) 6" Nail embedded wood cutting blades, (1) 9" Nail embedded wood cutting blade, (1) 6" Extreme metal cutting blade and (1) 9" Extreme metal cutting blade. Also included a handy storage case. Premium carbide teeth for long life in tough applications. Featuring Universal Fitment for adapter free use in all major oscillating tool brands. Durable enough to tackle tough jobs. Diamond grit for long life. Black finish. Thickness: 0.7". Applicable materials: Wood and mold.
BLADE OSCILLATNG DIAMOND SWING Sonicrafter RW8981K Multi-Function End Cut Blade Set BLADE DIAMOND SEGMENT 1PK
With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Universal fit for use on all major brands. Power brushless motor provides 5200 rpm maintaining speed under load. Diamond grit for fast cuts in tough applications. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Includes 2 each: Precision wood end cut blade for aggressive plunge cutting in wood; standard wood end cut blade for general purpose cutting; and bi-metal-metal/wood end cut blade for cutting up to 1-5/8" depth on wood, plastics, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. 1-3/8" blades. Universal fit system allow accessory to fit all major brand oscillating tools. For grinding. High service life for removal of plaster, grout and concrete. Kerf up to 1/32". Diamond coated.
Dremel MM480B Oscillating Flush Cut Blade BLADE GROUT RMVL DIAM HLF MOON BLADE ACCESSORY MULTI-TOOL 5PC
High carbon steel blade material for high performance wood cutting applications. Quick Fit system for fast accessory changes. Allows cutting the width of a 2 x 4. Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. May be used on wood, plastic, drywall and other soft materials. 1-5/8" depth of cut. 1.25" width. With carbide edging for aggressive material removal, Dewalt oscillating grout removal blades are compatible with all major oscillating tool brands. No adapter required. Long life in material removal applications. Power brushless motor provides 5200 rpm maintaining speed under load. Diamond grit for fast cuts in tough applications. 7-1/4" capacity blade provides 2-9/16" cutting capacity at 90 degrees. Carbide teeth for high performance in metal and other materials. Color coded interface and laser etched blade to quickly identify the right blade. Starlock interface for professional performance. Also works with OIS compatible tools including Bosch, Fein, Milwaukee, Makita, Rigid and others. Precision Swiss made blade. 5 piece set includes 1 of each: OSL114C, OSL114JF, OSL114F, OSL200RS AND OSL312F.
BLADE SAW OSCILL ACCESSORY SET BLADE 3-1/8IN SEGMENT HSS 3PK BLADE VARIETY TITANIUM 6PACK
Includes 6 different Fein E-Cut saw blades: (1 ea.) E-Cut Universal Metal/Wood saw blades 1-1/8" and 1-3/4", (2 ea.) E-Cut Long-Life Wood saw blades 1-3/8" and 19/16" all in a plastic case. Fits Fein MultiMaster Start Q and Cordless, MultiTalent Start Q, and MultiMaster Top tools. For sawing purpose. Ideal for cutting wood, fiberglass and sheet metal. Titanium high-speed steel. 18 teeth per inch. For sawing. Variety pack of titanium-coated, bi-metal teeth give the blades longer life and comes with a carrying case. Optimized for wood, metal and PVC. Specifically designed for various applications.
BLADE PRECISION 2-9/16IN 10PK BLADE UNIV E-CUT 1-1/8IN 10PK BLADE 1-1/4IN WD/NAIL BM 10PK