Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > SAW BLADES & ACCESSORIES > RIP FENCES
Sort By:
1
Bosch CWDG1M415 Type 1A Straight Cutting Cut-Off Wheel Norton 01617 Type 1 Center Cut-Off Blade Norton 01616 Type 1 Center Cut-Off Blade
For use with die grinders. .045" blade thickness, Type 1A, AS46T-BF grit wheel is designed for metal cutting. For traditional cut-off applications. Thin design for cleaning, slotting and cutting metal, metal studs, angle iron, tubing, autobody panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. .040 blade thickness. For traditional cut-off applications. Thin design for cleaning, slotting and cutting metal, metal studs, angle iron, tubing, autobody panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. .040 blade thickness.
Dewalt DWA8050 Type 1 Small Diameter Cut-Off Wheel WHEEL CTOFF ABRSV 4-1/2X3/32IN Norton 10655 Type 1 Cut-Off Wheel
Thin .045" wheel design for fast burr free cutting. Softer aluminum oxide formulation provides faster cutting. For use on electric and air die grinders for fast cut-off and slotting of all types of metal. Small diameter reinforced blade. Type 1 center. 1/16" blade thickness.
Norton 89098 Type 1 Cut-Off Wheel WHEEL CUTOFF ABRSV 4X1/16IN   Norton 89387 Type 1 Cut-Off Wheel
For use with circular saws. For deburring, cleaning, slotting and cutting of all types of metal, and cutting roof decking. Type 1 center. 1/8" blade thickness. For use on electric and air die grinders for fast cut-off and slotting of all types of metal. Type 1 center. 1/8" blade thickness.
WHEEL CTOFF ABRSV 4-1/2X1/16IN WHEEL CUTOFF MTL 4X1/16X3/8IN WHEEL CUTOFF MTL 4X1/16X5/8IN
4" (101.6mm) x 1/16" (1.59mm) Type 1 steel cutting wheel with arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Thickness: 1/16"; Maximum rpm: 19,100; Tool type: die grinder/angle grinder. 4" (101.6mm) x 1/16" (1.59mm) Type 1 steel cutting wheel with arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Thickness: 1/16"; Maximum rpm: 19,100; Tool type: die grinder/angle grinder.
Norton 23602 Type 1 Cut-Off Wheel WHEEL CUTOFF MTL 4X1/8X3/8INCH WHEEL CUTOFF TYP1 MTL 4X1/32IN
For traditional cut-off applications. Thin design for cleaning, slotting and cutting metal, metal studs, angle iron, tubing, autobody panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. .045 blade thickness. 4" (101.6mm) x 1/16" (1.59mm) Type 1 steel cutting wheel with arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Wheel size: 4"; Thickness: 1/8"; Arbor: 3/8"; Maximum rpm: 19,100; Tool type: die/air grinder. 4" (101.6mm) x 1/32" (.79mm) type 1 steel cutting wheel with 3/8" (9.52mm) arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on die and air grinders only. Wheel size: 4"; Thickness: 1/32"; Arbor: 3/8"; Maximum rpm: 19,100; Tool type: die/air grinder.
Dewalt DW8062 Type 1 Reinforced Cut-Off Wheel CUTOFF DISC MTL THN KERF 4-1/2 CUTOFF DISC MTL THIN KERF 4IN
For use with angle grinders. .045" blade thickness, Type 1 flat cut blade is designed for cutting metal. Premium high speed metal cut-off discs provide ideal performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal for use when working in hard to reach areas. For use on metal applications like steel, stainless, cast iron and sheet metal. Premium high speed metal cut-off discs provide ideal performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal for use when working in hard to reach areas. For use on metal applications like steel, stainless, cast iron and sheet metal.
CUTOFF WHEEL TYP27 STEEL 4.5IN CUTOFF WHEEL TYPE27 4.5X.090IN WHEEL CUTOFF MTL4.5X1/16X7/8IN
Aluminum oxide metal cutting wheel. For metal cutting, metal abrasion, body work, metal fabrication and general repair work. Use on ferrous materials. Designed to be used on right angle grinder with proper adapters. Wheel size: 4-1/2"; Thickness: .045" Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on right angle grinders with proper adapters. Wheel size: 4-1/2". 4-1/2" (114.3mm) x 1/16" (1.59mm) steel cutting wheel with 7/8" (22.22mm) arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on right angle grinders only. Wheel size: 4-1/2"; Thickness: 1/16"; Arbor: 7/8". Maximum rpm: 13,580; Tool type: right angle grinder.
WHEEL CUTOFF MTL 4.5X1/8X7/8IN WHEEL CUTOFF MTL4.5X.045X7/8IN CUTOFF DISC METAL 6-1/2 IN
4-1/2" x 1/8" x 7/8" arbor. Aluminum oxide metal grinding wheel. Designed for metal grinding, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed for use on right angle grinders. Wheel size: 4-1/2"; Thickness: 1/8"; Arbor: 7/8". Maximum rpm: 13,300; Tool type: right angle grinder. 4-1/2" (114.3mm) x .045" (1.14mm) steel cutting wheel with 7/8" (22.22mm) arbor. Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on right angle grinders only. Wheel size: 4-1/2"; Thickness: .045"; Arbor: 7/8". Maximum rpm 13,580; Tool Type: right angle grinder. This premium metal cut-off disc provides superior performance and increased productivity. Premium aluminum oxide blend, cuts through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal for use when working in hard to reach areas. For use on metal applications like steel, stainless, cast iron and sheet metal. 1/8" thickness.
CUTOFF WHEEL TYPE27 4.5X.040IN CUTOFF WHEEL SS 4.5X.045X7/8IN CUTOFF WHEEL TYP1 STL 4.5X.040
Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on right angle grinders with proper adapters. Wheel size: 4-1/2". Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on stainless steel materials. Designed to be used on right angle grinders with proper adapters. Wheel size: 4-1/2"; Thickness: .045". Aluminum oxide metal cutting wheel. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on ferrous materials. Designed to be used on right angle grinders with proper adapters. Wheel size: 4-1/2"; Thickness: .040".
Norton 43208 Type 1 Cut-Off Wheel CUTOFF WHEEL AL 4.5X.045X7/8IN WHEEL CUTOFF ABRSV 8X3/32IN
For traditional cut-off applications. Thin design for cleaning, slotting and cutting metal, metal studs, angle iron, tubing, autobody panels and sheet metal. Supplied with full fiberglass reinforcing. Use with right angle grinders. Type 1 center. 1/16" blade thickness. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Used on aluminum and other non-ferrous materials. Designed to be used on right angle grinders with proper adapters. Wheel size: 4-1/2"; Thickness: .045".
CUTTING WHEEL 4.5X.045X7/8 T1 Norton 89010 Type 1 Cut-Off Wheel CUTOFF DISC HI-SPD MSNRY 12 IN
Engineered to maximize runtime. High density grain concentration for fast cutting and low heat build-up. High performance ceramic grain stays sharp for fast, efficient cuts. 7/8" arbor. For use with circular saws. For deburring, cleaning, slotting and cutting of all types of metal, and cutting roof decking. Type 1 center. 1/8" blade thickness. High speed premium high speed masonry cut-off disc provides ideal performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal for use when working in hard to reach areas. For use on masonry applications like concrete brick, cinder block, cement and paver stones. 1/8" thickness.
CUTOFF DISC HI-SPD MSNRY 12 IN Norton 37839 Type 1 Cut-Off Wheel Gator Grit 9426 Cut-Off Wheel
High speed premium high speed masonry cut-off disc provides ideal performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer extra long cutting life. Fully reinforced for use in hand held cut-off work. Ideal for use when working in hard to reach areas. For use on masonry applications like concrete brick, cinder block, cement and paver stones. 1/8" thickness. Coarse grit for cutting brick, block, concrete or other masonry materials. For higher-production application that require optimum speed of cut and product life. Type 1 center. 1/8" blade thickness. For cutting metal in small places. Fits pencil or die grinders. Fiberglass reinforced. When you want to cut, grind or sharpen almost anything.
Gator 3454 Abrasive Cleaning Stick Dewalt DW8026 Type 1 Double Reinforced Cut-Off Wheel WHEEL CUTOFF ABRSV 12X3/32IN
Made from natural rubber. This cleaning stick will increase the life of your sanding belts and discs up to 8 times as long. Easy to use. Cleans your sander while it is running and saves you time and money. Improves the quality of the finish and helps to prevent burn marks. High performance silicon carbide grain for high material removal. Double reinforced with 2 full sheets of fiberglass for longer life. 1'' arbor; 1/8'' thickness. Maximum rpm; 6,400. Grain size and wheel hardness formulated to cut efficiently. Durable color-coding insures no confusion between metal and masonry wheels. 3/32" blade thickness is designed for cutting masonry.
Skil 95100 Adjustable Rip Fence WHEEL CUT THIN MTL 4-1/2X7/8IN WHEEL CUTTING MSNRY/ASHLT 12IN
Eliminates repeated measuring and marking on rip work. For Skil circular saw Nos.534, 574, 576, 559, 5125, 5150, 5170, 5250, 5250-05, 5350 and HD5510. Thin .045" wheel design for fast burr free cutting. Aluminum oxide grain combination for aggressive cutting action. 2 full sheets of fiberglass for durability and safety. Masonry/asphalt 12" (304.8mm) x 1/8" (3.18mm) cutting wheel with 1" (25.4mm) arbor. Silicon carbide and dual fiberglass reinforced. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. Quality made to provide fast, safe, dependable service. Designed to be used on stationary saw machines only. Wheel size: 12"; Thickness: 1/8"; Arbor: 1". Maximum rpm: 5,095; Tool type: stationary saw.
DISC METAL CUTTING DIAM 4.5IN Makita 1640958 Rip Fence CUTOFF WHEEL DIAM AG 4 X 5/8IN
Diamond rimmed wheels deliver up to 100 times longer cutting life and durability when compared to one standard bonded cut-off disc. Advanced electro plating process for even distribution of diamond abrasive cutting edge. Maintains cutting diameter for consistent cutting results. Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust. Diamond wheels don't shatter or break when dropped. For cutting rebar, angle iron, cast iron and steel bar. For angle grinders and circular saws. Heavy-Duty Plus grade. 7/8" arbor size. Maximum speed: 13280 rpm. For accurate ripping without penciling problems. Use with Makita Nos.5005BA, 5057KB, 5007NB, 5007NBA, 5077B, 5740NB, 4200H and 5008NBA. 9-1/2"L overall. For multiple types of metal including steel, sheet metals, stainless steel, rebar, cast iron, aluminum and non-ferrous metals. Designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. The cutting depth stays the same throughout the blades life, meaning better control, reach and precision. Less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut. Delivers more cuts with no need for wheel changes.
CUTOFF WHEEL DIAM AG 4.5X7/8IN Dewalt DW3278 Cutting Guide Rip Fence CUT WHEEL 4.5X.045X7/8 T1 5PK
For multiple types of metal including steel, sheet metals, stainless steel, rebar, cast iron, aluminum and non-ferrous metals. Designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. The cutting depth stays the same throughout the blades life, meaning better control, reach and precision. Less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut. Delivers more cuts with no need for wheel changes. For accurate ripping without penciling problems. For use with all DeWalt circular saws. Engineered to maximize runtime. High density grain concentration for fast cutting and low heat build-up. High performance ceramic grain stays sharp for fast, efficient cuts. 7/8" arbor.
CUTOFF WHEEL DIAM DG 4 X 3/8IN Dewalt DW8061 Type 1 Reinforced Cut-Off Wheel Dewalt DWA8051 Type 1 Small Diameter Cut-Off Wheel
For multiple types of metal including steel, sheet metals, stainless steel, rebar, cast iron, aluminum and non-ferrous metals. Designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. The cutting depth stays the same throughout the blades life, meaning better control, reach and precision. Less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut. Delivers more cuts with no need for wheel changes. Thin .045'' metal/stainless cutting wheel design for fast, burr-free cutting. Proprietary aluminum oxide grain combination for aggressive cutting action. Proprietary material mix ensures durable long life wheels. 15,200 maximum rpm. Thin .045" wheel design for fast burr free cutting. Softer aluminum oxide formulation provides faster cutting.
   
 
1