Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > DOWELING/ JIGS AND ACCESSORIES > POCKET HOLE JIGS & CONNECTORS
Sort By:
1
Apex 30253 Chuck Key Holder Kreg DDS Driver Combination Set Apex 30827 Replacement Chuck Key
Universal chuck key holder attaches your chuck key directly to your drill cord to help keep it where you need it. 30252 Fits most brands of 1/4", and 3/8" chuck keys; 30253 is universal. Black rubber. Features a solid one-piece construction, magnetic tip, and complete quick-change compatibility. Deep #2 driver resists cam-out. Includes one of each: 3" and 6". Soft steel handle limits potential for dangerous fracturing under excessive loads.
Kreg SML-C2 - 50 Pocket Hole Screw Apex 30249 Replacement Chuck Key Kreg SPS-F075-100 Self-Tapping Wood Screw
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. Soft steel handle limits potential for dangerous fracturing under excessive loads. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
Kreg SPS-F125-100 Self-Tapping Wood Screw Kreg SML-F125 - 100 Pocket Hole Screw Kreg SML-C125 - 100 Pocket Hole Screw
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
Apex 30825 Replacement Chuck Key Apex 30605 Replacement Chuck Key Kreg SPS-F1 100 Pocket Hole Screw
Soft steel handle limits potential for dangerous fracturing under excessive loads. Soft steel handle limits potential for dangerous fracturing under excessive loads. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
Kreg SML-C2B-50 Blue-Kote Pocket Hole Screws Dewalt DW2301 Chuck Key Kreg SPS-C1 - 100 Pocket Hole Screw
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications. Shock resistant tool steel has advanced hardening process. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
Apex 30251 Replacement Chuck Key Apex 30250 Replacement Chuck Key Dewalt DW2304 Chuck Key
Soft steel handle limits potential for dangerous fracturing under excessive loads. Soft steel handle limits potential for dangerous fracturing under excessive loads. Shock resistant tool steel has advanced hardening process.
Kreg KJSC/D Depth Collar Kreg SML-C250-50 Pocket Hole Screw Kreg SML-C150 - 100 Pocket Hole Screw
Works for any 3/8" Kreg drill bit. Designed for controlling the depth when drilling standard pocket holes with any Kreg Jig. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
Kreg SML-F150-100 Maxi-Loc Pocket Hole Screws Kreg SPS-F150-100 Self-Tapping Wood Screw Kreg SML-C2X250-30 Pocket Hole Screw
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock. For use with the Kreg Jig HD and 1-1/2'' and larger stock. Large 2-1/2'' long #14 hardened-steel screws provide ideal shear resistance as well as a Protec-Kote finish with three anti-corrosion layers for long-term moisture resistance.
Kreg SML-C250B-50 Pocket Hole Screw Kreg Tool SML-C125B-100 Blue-Kote Pocket Hole Screws Kreg Jig D6HD Replacement Driver Bit
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications. Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications. 6'' driver with deep #3 square drive. Optimized for use with Kreg Jig HD screws. Solid one-piece construction, magnetic tip, and complete quick-change compatibility for fast and easy bit changes.
Kreg SML-C150B-100 Blue-Kote Pocket Hole Screws Kreg P-PNT Pocket Hole Plug General Tools 24 Hobby Drill Gage
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications. Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. Drill Gage is a useful guide for identifying drill bit sizes; extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings. Measures bits from 1/16" to 1/2" x 64ths metric range from .062 to .500mm; made from heavy duty stainless steel with black etched graduations.
Kreg P-OAK Pocket Hole Plug Kreg P-MAP Pocket Hole Plug Kreg P-PIN Wood Peg
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick.
ADAPTOR QUICK CHANGE UNIVERSAL SCREW NO8 COARSE 1-1/4 250CT  SCREW PCKT 7 FINE 1-1/4 250CT
Universal quick change adapter; when inserted into the chuck of a power drill it allows for the quick change of all bits that have a 1/4" quick change shank. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection. For indoor use. Fine-thread for use with hardwoods. Maxi-Loc screws are an ideal choice for a variety of applications. These screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. The preferred choice for hardwoods that are hard and dense. These threads are less aggressive, so they'll drive without splitting, but these screws have a higher number of threads per inch to ensure great holding power. For use on Oak, Cherry, Maple, Poplar, Walnut, Birch, Ash, Hickory, and Mahogany.
Kreg KMA3210 Shelf Pin Jig Drill Bit SCREW NO8 COARSE 1-1/2 250CT  General Tools 14 Drill Gage
High-speed steel construction with ultra-sharp brad point tip. Drills smooth holes fast. For use with the 1/4" Kreg Shelf Pin Jig. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection. The hole sizes and decimal equivalents are permanently etched on face so they won't wear off with repeated use. Number size drills 61 to 80. Fractional size drills 1/16" to 1/2" x 64ths. Metric range from .062 to .500mm. This gage has been crafted to meet government specifications.
Kreg SML-C2-250 Maxi-Loc Pocket Hole Screws Jacobs 30247 Multi-Craft Drill Chuck SCREW WR 8 COARSE 2-1/2 125CT
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. Tested design normally found only in industrial  grade chucks. Maxi-Loc screws are the Kreg Screw of choice for the majority of applications. These screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. Blue-Kote-finished screws feature three anti-corrosion layers, making them the perfect choice for a wide variety of indoor and outdoor projects. Rust-resistant screws; works with pressure-treated material. Recommended for use with softwoods, as well as for sheet goods such as plywood and MDF that are soft and not very dense. The deep, aggressive threads bite into soft fibers to ensure solid holding power.
Kreg Jig KJD Step Drill Bit Kreg SPS-F075-500 Self-Tapping Wood Screw Kreg SML-C2B-250 Blue-Kote Pocket Hole Screws
One-piece design that eliminates clogging and provides a smooth and fast drilling stroke. For Kreg jigs. 0.170" dia pilot tip. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock. Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
Kreg Jig QUIK-Bit Kreg SML-C1-500 Maxi-Loc Pocket Hole Screws Kreg SPS-C1-500 Self-Tapping Wood Screw
For Kreg Joinery and use with any Kreg Jig. Features a 1/4" hex shank and compatibility with quick-change chuck. Can also be used with any manual Kreg Jig. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
Kreg SML-F125S5-100 Pocket Hole Screw Kreg MKJKIT Mini Pocket Hole Jig Kit Kreg SML-C2X250-125 Pocket Hole Screw
Provides protection for indirect maritime applications and other exceedingly corrosive environments. For application where the smallest jig possible is required. Unlimited material thickness. Fenceless design allows you to make precise angle and stock depth adjustments. Hardened-steel drill guide. Glass-reinforced Nylon Body. Plug-setting guide helps to fully seat wood plugs. Works with a variety of common clamps or any Kreg Face Clamp. 1/2" to unlimited screw centering ability. Kit includes the Kreg Jig Mini, stepped drill bit, depth collar, and allen wrench. For use with the Kreg Jig HD and 1-1/2'' and larger stock. Large 2-1/2'' long #14 hardened-steel screws provide ideal shear resistance as well as a Protec-Kote finish with three anti-corrosion layers for long-term moisture resistance.
Kreg SML-F125 - 500 Pocket Hole Screw Kreg SML-C125 - 500 Pocket Hole Screw Kreg Tool SML-C250-250 Maxi-Loc Pocket Hole Screws
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
Kreg SML-C125S5-100 Pocket Hole Screw Jacobs 30602 Multi-Craft Drill Chuck Kreg SML-C150S5-100 Pocket Hole Screw
Provides protection for indirect maritime applications and other exceedingly corrosive environments. Tested design normally found only in industrial  grade chucks. Provides protection for indirect maritime applications and other exceedingly corrosive environments.
Kreg SML-C250B-250 Pocket Hole Screw Kreg Tool SML-C150-500 Maxi-Loc Pocket Hole Screws Kreg SPS-F150-500 Self-Tapping Wood Screw
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold. For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
Jacobs 30354 Hand-Tite Drill Chuck Rockwell RW9275 3-Jaw Drill Chuck JIG CABINET PULL/KNOB LOCATING
Features a non-rusting, high-performance body with a unique sure-grip sleeve for maximum user comfort and hand tightening efficiency, reduces bit changeover time and boost productivity, never a key to misplace. Allows for round shank drill bits to be used in 1/4" hex quick-connect shank. Adjustable guides for accurate hole placement. Built-in measuring scales for repeatable results. Versatile for mounting single and multi-hole knobs. Strong and lightweight for easy handling. Adjustable edge guide for easy positioning. Durable hardened-steel drill guides.
JIG DRAWER SLIDE MOUNTING     Kreg Jig KJDHD Replacement Drill Bit Kreg SML-C250S5-50 Pocket Hole Screw
JIG DRAWER SLIDE MOUNTING
Our Price: $24.82
Install drawer slides the fast, easy way. For drawers that fit perfectly every time and slide smoothly. Accurate slide positioning with built-in indexing tabs. Repeatable results without measuring and marking. Versatile for use in cabinets, cases, and more. Reversible to mount slides to cabinet and drawer box. Secure for holding slides in place as you work. Strong, lightweight materials for easy handling. For use with Kreg Jig HD. Features a 1/4'' hex shank and compatibility with quick-change chuck and standard chucks. Drills a HD 1/2'' diam. pocket hole. One-piece, hardened steel, rugged design. Includes stop collar and allen wrench. Provides protection for indirect maritime applications and other exceedingly corrosive environments.
Oldham 10060TP Circular Saw Blade BLADE CRB NON-FERROUS 60TX10IN Kreg Tool QUIK-KIT Pocket-Hole Kit
Thin kerf saw blade for circular saws and table saws. Designed for smooth ripping and crosscutting in wood, all building materials, plywood, chipboard, paneling, pressboard and marlite. Provides smooth finish used for woodworking and construction. Alternate top bevel, .070" plate, .122" kerf, 10 degree hook angle. Thin kerf blade for circular and miter saws. Designed for smooth fast cuts. Durable, machine welded carbide tips. Anti-kick back safety feature. C45, 0 degree hook angle, 6,500 RPM. Provides everything needed to switch from drilling pocket holes to driving pocket screws. Includes quick-change chuck, a 6" #2 square driver, 3/8" hex-shank pocket-hole drill, allen wrench, and depth collar.
JIG HINGE CONCEALED BORING    Kreg SK03 Assortment Self Tapping Pocket Hole Screw Kit Dewalt DW0521 Drill Chuck
Make cabinet door installation easy. Get drill press accuracy with any hand drill. Accurate hinge positioning with built-in indexing tabs. Repeatable results with built-in measuring scales. Reliable drilling with bit guide and stop collar. Simple to use with any drill; no special tool needed. Adjustable cams ensure proper hinge offset. Durable carbide tipped drill bit included. Strong, lightweight materials for easy handling. Includes 150 count of: SPS-F1 (1", fine), SPS-C1 (1", coarse), SML-F125 (1-1/4", fine), and SML-C125 (1-1/4", coarse), and 75 count of SML-C250B (2-1/2", coarse). Single sleeve design allows for single handed tightening. Built with all-metal construction for maximum durability; 1/4" hex quick connect allows users to change from fastening to drilling.
DeWalt DWARA100 Right Angle Drill Adapter SCREW NO8 COARSE 1-1/4 1200CT SCREW PCKT 7 FINE 1-1/4 1200CT
For tighter access with your current Impact driver. Magnet secures fastener. 1/4" shank. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection. For indoor use. Fine-thread for use with hardwoods. Maxi-Loc screws are an ideal choice for a variety of applications. These screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. The preferred choice for hardwoods that are hard and dense. These threads are less aggressive, so they'll drive without splitting, but these screws have a higher number of threads per inch to ensure great holding power. For use on Oak, Cherry, Maple, Poplar, Walnut, Birch, Ash, Hickory, and Mahogany.
Irwin Classic 15370 Circular Saw Blade Kreg KMA3220  Deck Jig Kits SCREW NO8 COARSE 1-1/2 1200CT
Thin kerf saw blade for circular saws. Alternate top bevel, .2.7mm kerf, 13 degree hook angle. Six hardened-steel drill guides. Removable, dual-position fence. Standard 32mm hole spacing. Includes 5mm drill bit. Included locating pin for fast, accurate registration. Built-in storage for locating pin, drill bit and depth collar. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection.
General Tools 849 Pocket Hole Jig Kit Dewalt 20 Circular Saw Blade CHUCK KEYLESS METAL 3/8IN
CHUCK KEYLESS METAL 3/8IN
Our Price: $40.52
Jig allows you to create three popular types of pocket hole joints with accuracy and relative ease. Made of heavy duty aluminum, it can be mounted to a bench for stationary use and includes a clamping system for portable use. Used in applications such as building cabinets, furniture or other high precision woodworking endeavors. Includes: 1 pocket hole jig with clamps, 3/8" step drill bit; 3 step drill stops: 1/4", 5/16", 3/8", hex wrench, 6" steel square drive bit, square drive screws. Thin kerf, .095", saw blades are for use with miter saws and table saws. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder for increased durability and accuracy. Used for fine crosscuts in natural wood, plywood and wood composites. Alternate top bevel, +5 degree hook angle, .069" plate. Metal Impact Driver Keyless Chuck is a drill attachment that is made from metal. This chuck can convert an impact driver into a driver drill. It accepts round and hex shank bits.
BLADE METAL CUT 8IN 42T       Piranha 77-770 Circular Saw Blade ORGANIZER SYSTEM KREG
Type II cermet provides a high heat tolerance and increased hardness for ideal wear and impact resistance. Ideal for use when cutting ferrous metals like steel studs, angle iron and flat bar. Laser-cut anti-vibration stabilizer vents deliver straight and true cuts. Triple chip grind provides less spark, burr-free finish and longer life. Perma-Shield non-stick coating for less heat, gumming and corrosion. Thin kerf, .045", design cuts more efficiently. Carbide tipped saw blades cut faster and last longer than conventional carbide blades. Heat treated for longer life. Alternative tooth bevel, .071" plate, +15 degree hook angle. The ideal way to store and organize an entire Kreg Joinery system in one compact, convenient case. The case holds your Kreg Jig, plus accessories like clamps, bits, drill guide blocks, screws, and more. Custom inserts organize and protect contents, making it easier than ever to keep everything needed close at hand.
Kreg R3 Pocket Hole System Diablo D1060X Circular Saw Blade General Tools 36/37 Precision Drill Guide
Features two independent positioning sliders, nine individual depth settings, two wood chip relief holes, and hardened-steel drill guides. 7/8" drill guide spacing. Works with with a wide variety of clamps. Face Clamp for clamp pad adapter. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" and 1-1/2" screw centering ability. Kit contains Kreg Jig Jr., clamp adapter, stepped drill bit, 6" driver bit, depth collar, allen wrench, starter screw set, instruction manual, and carrying case. Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle. You can adjust the Drill Guide in 5 degree increments from 0-45 degrees, left and right. V-Guides for drilling through rounded stock or dowel, positive stop for accurate drill depth and centering channel on base for edge drilling. Attaches to all 3/8" and 1/2" power drills. Folds for tool-box storage.
Marathon 14074 Combination Circular Saw Blade Dewalt DW3215PT Circular Saw Blade Marples Woodworking 1807369 Circular Saw Blade
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf. Thin kerf, .098", saw blade for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for very smooth crosscuts. Alternate top bevel, 6,000 maximum RPM, .071" plate, kerf, 10 degree hook angle. For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Designed to do both cross-cutting and ripping. Teeth are arranged in a three or five tooth pattern and incorporate a flat raking tooth after each sequence of ATB teeth. 15-degree alternate top bevel plus raker, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm.
Diablo D1080X Circular Saw Blade Milwaukee 49-22-8510 Drill Attachment Irwin 3073002 Bi-Metal Plumber Hole Saw Kit
Thin kerf saw blade for miter and table saws. Used for crosscutting oak, pine melamine, veneer, plywood and delicate molding. Laser cut stabilizer vents for reduced vibration and precise cuts. Compact attachment measures 2" wide, allowing it to fit in tight, difficult to reach places. Durable all metal housing and steel gears with ball bearing construction allows the adapter to handle up to 235 in-lbs of torque. Allows you to drive screws and drill bits in tight, difficult work areas. For use with cordless drills; convenient quick change chuck accepts standard 1/4" hex drive accessories, Bi-metal construction and hard steel RC 65-66 for long life; 4/6 variable pitch teeth for reduced noise and improved performance with clearly printed hole saw sizes for quick retrieval. Includes (1) one each: 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4", (1) each: 1/2" hex shank, 3/8" hex shank, pilot drill and carrying case.
Milwaukee 48-40-4515 Circular Saw Blade Marples Woodworking 1807370 Circular Saw Blade Marathon 14076 Circular Saw Blade
Thin kerf, .073", saw blade for use with circular saws. Designed for cutting a variety of ferrous materials 3/32" and thicker including pipe angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts, 0-degree hook angle, 5,000 max rpm. For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Used for extra-fine cross-cutting. High bevel angle increases the knife-like action at the edge of the blade. 30-degree high alternate top bevel, 10-degree positive hook angle, .098" thin kerf, 7,000 rpm. Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6mm plate, .0.095" kerf.
Dewalt DW3218PT Circular Saw Blade Eazypower 81544 Drill Attachment Marples Woodworking 1807381 Circular Saw Blade
Thin kerf, .098, saw blade for use with miter and table saws. Premium Micro-Grain carbide produces ultra-sharp cutting edges. Dampening Slots reduce vibration. Tough Coat finish reduces heat, friction, and gum. Used for ripping, general purpose, and fine crosscutting. Alternate top bevel, 6,000 maximum rpm, .071" plate, 10 degree hook angle. Turns any drill into an angle drill. Fits into drill chuck like you would use a drill bit. Use in hard to reach areas with drill bits, wire brushes, polishers and grinding discs. Completely sealed, never needs lubricating. Not for use in hammer drills. Includes: Jacobs 3/8" chuck For use on miter or table saws. Extra-sharp, oversized carbide teeth are re-sharpenable. Precision tensioned. Heat-resistant non-stick coating reduces gumming. Cuts hard materials. Teeth alternate between a flat raking tooth and a trapezoid shaped tooth. Triple chip grind,  15-degree hook angle, .098" thin kerf, 7,000 rpm.
Diablo D1090X Circular Saw Blade Diablo D1084L Circular Saw Blade BLADE NON-FEROUS PLST 80TX10IN
For miter/slide miter and table saw. Non-stick permashield coating. Axial shear face grind tooth geometry..087" ultra thin kerf, 10-degree hook angle, and 7,000 max rpm. Blade is used to cut laminate flooring, double sided laminates, and melamines cleanly. The triple chip grind (TCG) tooth design gives clean, chip free cuts and longer life in abrasives. Laser cut stabilizer vents for reduced vibration and precise cuts. Durable micrograin titanium carbide teeth for razor sharp cuts and longer life. Perma Shield permanent coating prevents gumming and corrosion. Laser cut thin kerf design gives fast clean cuts. Diablo's next generation aluminum saw blades are optimized for cutting thin (up to 1/8"), medium (3/32 to 1/4") and thick (3/16 to 7/16") aluminum metal. The specially formulated metal cutting carbide teeth feature a triple chip grind (TCG) tooth design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-metal shock resistant brazing allows these aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability. TiCo super density micro grain carbide for extreme cutting life and clog free cuts. Perma-Shield non-stick coating for protection against heat, gumming and corrosion. Laser cut stabilizer vents for trapping noise and reducing vibration for accuracy and durability. These radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. Teeth Type: 80 triple chip grind. Cutting depth: 4". Thickness: 0.071". Maximum speed: 7000 rpm. Kerf: 0.094". For miter/slide miter saw and table saw.
Evolution 10BLADEST Circular Saw Blade Kreg KJHD Pocket Hole Jig Kit Kreg SML-C250S5-250 Pocket Hole Screw
Use with Rage3/Rage3DB saws; maximum RPM 3000; kerf .078" (5/64"). Optimized for large outdoor projects. For use with 1-1/2'' materials and up. Works with the K3 and K4 Kreg Jig and Kreg Jig Master System. Stop block provides easy, repeatable registration to workpiece. Face clamp locks into Kreg Jig HD for secure drilling. Hex shank HD drill bit is quick-change compatible. For use when framing walls, building deck railings, backyard furniture, fences, benches or other large projects. #14 industrial-quality, heavy-duty, hardened-steel screws which provide resistance as well as a three anti-corrosion layers for long-term moisture resistance. 6'' HD driver bit. Works as a stand-alone jig, simply connect to your Kreg Face Clamp. Provides protection for indirect maritime applications and other exceedingly corrosive environments.
Freud LU85R010 Cut-Off Circular Saw Blade Lenox 30860C600P Bi-Metal Plumber Medium Hole Saw Kit Irwin 4935561 Circular Saw Blade
Thin kerf, .116", circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum rpm, .098 plate, +10 degree hook. High speed steel teeth are reinforced to cut stronger, last longer, resists tooth strippage and withstands high torque. Includes (1) one each: 3/4", 7/8", 1-1/8", 1-3/8", 2", 2-1/2", arbors: 2L, 5L, 1)  pilot drill (1) arbor adapter and carrying case. Laser cut blade with metal cutting grade carbide teeth, anti-kickback tooth shoulder and laser cut anti-vibration vents.
Kreg K4 Pocket Hole Jig Master System K4MS Pocket Hole Jig Kreg K5 Pocket Hole Jig Kits
Removable drill guide for benchtop and mobile use. 1/8" incremental settings for materials from 1/2" to 1-1/2" thick. Three drill guide fixed spacing on hardened steel drill guide. Toggle clamp on benchtop base. Face clamp for portable base. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" screw centering ability. 9/16", 7/8", 1-7/16" drill guide spacings. Includes jig, spacer block, stepped drill bit, 6" square driver, starter screw set, starter plug set, Skillbuilder DVD, and quick-start guide. Features a durable glass-reinforced nylon body, a solid clamp design, and a large clamping recess for securing to work surface. Removable drill guide for use with benchtop and portable bases. Toggle clamp on benchtop base. Face clamp for portable base. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2" screw centering ability. Three hardened-steel drill guide fixed spacing, 9/16", 7/8", 1-7/16". Dust collection shroud. Material support stop. Includes jig, face clamp, portable base, drill guide spacer, material support stop, dust collection attachment, spacer block, 3/8" stepped quick-change drill bit, 6" and 3" quick-change square driver, starter screw set, starter plug set, quick-start guide, SkillBuilder DVD, and carrying case. All new clamping mechanism that has a front-mounted handle and adjusts to different work piece thicknesses without tools or adjusting nuts. Large support wings with built-in storage compartments, standard swiveling dust collection port, quick-release adjustment of the removable drill guide block and full compatibility with the Kreg Micro Pocket Drill Guide and Kreg Jig HD.
JIG POCKET HOLE SYSTEM K5 KREG KREG FOREMAN BENCH POCKET HOLE
Combines the popular Kreg Jig K5 with premium accessories, allowing a new option when using the Kreg Joinery system. The Master System adds a 3" Automaxx auto-adjusting face clamp, as well as a portable base to the Kreg Jig K5. Adding the portable base gives buyers yet another use for this handy jig; simplified setup for portable building and making repairs. Plus, the Kreg Jig K5 Master System includes downloadable plans to help get you started building projects as soon as you take this system home. Whether you are a professional contractor or a weekend do-it-yourselfer, you will immediately appreciate the great features the Kreg DB210 Foreman Electric Pocket-Hole Machine has to offer. With one pull of the handle, the motor starts, the work piece is clamped, and the machine drills perfect pocket holes. The adjustable fence positions the work piece for precise pocket depth, and a pair of adjustable stops provides repeatable accuracy. A powerful motor enables fast drilling, and a quick-change chuck allows for fast bit changes. Plus, the new Foreman is the first Kreg pocket-hole machine that can create all three types of Kreg joints: standard 3/8", Micro Pocket, and 1/2" HD. The Foreman comes with a 3/8" step-drill bit and hardened guide, while the accessory Micro Pocket and HD bits and guides are sold separately.  Triple your work output or simply get it done faster with the Kreg Foreman. Powerful 110 volt, 5.0 amp, 2,800 rpm motor for fast drilling. 14" x 23-1/2" cast aluminum tabletop provides ample work space. Adjustable fence and depth stop for precise pocket depth in 1/2" to 1-1/2" material. Dust collection port on the base connected internally to catch chips at the source.
   
 
1