|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
Cutting edge of tungsten carbide particles bonded to alloy steel back cuts extremely hard abrasive materials. High heat and abrasion resistance; no teeth to dull or chip; resists snagging; smooth cutting; greater wear resistance. Used in applications such as laminates, fiberglass, ceramic tile, marble and slate, cast iron or composites; 1/4" Quick Change shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cutting edge of tungsten carbide particles bonded to alloy steel back cuts extremely hard abrasive materials. High heat and abrasion resistance; no teeth to dull or chip; resists snagging; smooth cutting; greater wear resistance. Used in applications such as laminates, fiberglass, ceramic tile, marble and slate, cast iron or composites; 1/4" Quick Change shank.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Cutting edge of tungsten carbide particles bonded to alloy steel back cuts extremely hard abrasive materials. High heat and abrasion resistance; no teeth to dull or chip; resists snagging; smooth cutting; greater wear resistance. Used in applications such as laminates, fiberglass, ceramic tile, marble and slate, cast iron or composites; 1/4" Quick Change shank.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
For use with ARTU hole saws 02805, 02810, 02820, 02830 02840, 02850, 02860, 02870 and 02890 (sku nos 322.1645, 322.1652, 322.1660, 322.1686, 322.1694, 322.1702, 322.1710 and 322.1744).
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes (1) each: 1-1/4", 1-1/2", 2", 2-1/8" and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
|
|
|
|
|
|
|
|
|
|
|
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
High speed steel teeth for fast and clean cuts through wood. Tooth design allows for a more aggressive cut and holds more chips. Includes (1) one each: 1-1/4", 1-1/2", 2", and 2-1/8" saws and a mandrel.
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
|
|
|
|
|
|
|
|
|
|
|
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
Tested design normally found only in industrial grade chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
High speed steel teeth with 1-3/4" maximum depth of cut. 1 piece with pilot drill bit and mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
Double tooth design strengthens each tooth for longer life and improved durability. Sharper tooth geometry cuts materials faster for faster drilling. Thick hardened backing plates prevent thread stripping. Deep cut style hole saw cuts more material in 1 pass.
|
|
|
|
|
|
|
|
|
|
|
|
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
|
Fast metal drilling speeds for double tooth design. Easy plug removal for ejection spring. Raised shoulder helps to prevent the drill from breaking through the material when hole is complete. Thin-walled design optimum metal drilling efficiency. Sharper tooth geometry. Thick, hardened backing plate. Deep-cut style. Increased high speed steel height
|
|
|
|
|
|
|
|
|
|
|
|
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
Fast metal drilling speeds for double tooth design. Easy plug removal for ejection spring. Raised shoulder helps to prevent the drill from breaking through the material when hole is complete. Thin-walled design optimum metal drilling efficiency. Sharper tooth geometry. Thick, hardened backing plate. Deep-cut style. Increased high speed steel height
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Tested design normally found only in industrial grade chucks.
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Reinforced to cut stronger, last longer and resists tooth strippage. High speed steel teeth resist breaking and offer extended life. Thick backing plate with holes for drive pins resists damage due to high torque.
|
Features a non-rusting, high-performance body with a unique sure-grip sleeve for maximum user comfort and hand tightening efficiency, reduces bit changeover time and boost productivity, never a key to misplace.
|
|
|
|
|
|
|
|
|
|
|
|
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows for round shank drill bits to be used in 1/4" hex quick-connect shank.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Impact Driver Keyless Chuck is a drill attachment that is made from metal. This chuck can convert an impact driver into a driver drill. It accepts round and hex shank bits.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cuts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
Single sleeve design allows for single handed tightening. Built with all-metal construction for maximum durability; 1/4" hex quick connect allows users to change from fastening to drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
|
|
|
|
|
|
|
|
|
|
|
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
Welded diamond tip for durability. Provides a quick, clean way to precisely drill through the densest, most abrasive tiles, including glazed ceramic and rock hard porcelain (both solid body and glazed). Reverse spiral threads permit continuous water cooling, so you can run the bits at higher speeds without fear of overheating. Core-ejection slot removes a plug of waste material, which is ideal for repetitive hole boring jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank. Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. Includes Thin wall hole saw sizes: 7/8" (49-56-9810), 1-1/8" (49-56-9820) and 1-3/8" (49-56-9830).
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
|
|
|
|
|
|
|
|
|
|
|
|
No arbor required. Split point pilot bit for faster penetration and less walking. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Continuous, brazed edge lasts longer in tile and stone.
|
Tungsten carbide abrasive hole saw. Self-sharpening particles, so when a particle chips, a new surface is created in its place. Comes with arbor and pilot. For use with any variable speed hand drill. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglas, PVC, wood with nails, cultured marble and drywall.
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
|
|
|
|
|
|
|
|
|
|
|
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
Diamond hole saw with 3/16" porcelain plus pilot bit, for use on all types of porcelain tile up to a scratch hardness of 8. Can also be used on granite and marble. The unique wave design allows for easier hole entrance and smoother cutting. For best results, cut holes at 400 to 600 RPMs using a liquid coolant.
|
|
|
|
|
|
|
|
|
|
|
|
|
A brazed diamond edge for more holes in tile and stone and cuts holes in less time than carbide grit or carbide tipped hole saws, uses a standard arbor.
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
Re-designed versatile hex shank drive shaft attached directly into the chuck of virtually any drill or 1/4" quick release chuck impact driver. Offset design saves hands. Navigates tight patterns and square cuts. Cuts a variety of building materials. 20 gauge capacity in galvanized steel. Use TS1RB TurboShear replacement blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. The Diablo 9 piece hole saw kit features (5) bi-metal hole saw cups, (1) piece SnapLock Plus mandrel, (1) pilot bit and (2) adaptor nuts (1/2" and 5/8") for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal hole saws. Diablo's hole saws and ShapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. 60 mm (2-3/8") cutting depth for 40 percent deeper holes in 1 pass and increased productivity. 1-size fits all mandrel, fits all Diablo hole saws from 5/8" to 6" diameter. Tool free plug ejection for fast material removal. Variable tooth design provides faster cuts with less vibration. Sizes included: 7/8", 1", 1-1/8", 1-3/8", 1-1/2" and 2". Also includes Mandrel, Pilot bit, 2 Adaptor Nuts and a heavy duty durable case for easy and convenient storage of hole saws.
|
Ice Hardened cryogenically treated for longer life. Optimized tooth form for faster cutting. Wide, angled and offset slots for easy plug access. Bi-metal construction with 8 percent cobalt for increased wear resistance. Kit includes: (1) 1-1-2" Ice hardened bi-metal hole saw, (1) 1-1-8" Ice hardened bi-metal hole saw, (1) 1" Ice hardened bi-metal hole saw, (1) 1/8" hex key, (1) 3/4" Ice hardened bi-metal hole saw, (1) 7/8" Ice hardened bi-metal hole saw, (1) Hole saw adapter, (1) 1/4" x 3-1/2" high speed steel pilot bit. Also includes convenient case for organization and transport.
|
No arbor required. The continuous, brazed edge lasts longer in tile and stone. Over sized slot in hole saw for easy plug removal with low torque, little pressure required for fast, easy cutting. Includes: 3/16", 1/4", 5/16", and 3/8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
Cuts up to 18 gauge material including, but not limited to sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. 360 degree swivel head allows for maneuverability when cutting. Works with most 18 to 20 VAC impact driver and drill tool brands. 1/4" hex shank. Yellow/black color.
|
Tungsten carbide grit set includes: 1-1/4", 1-3/4", 2-1/8", 2-1/2", arbor and pilot bit. Cuts ceramic tile, concrete block, cement board, brick, fiberglass, plexiglass, PVC, wood with nails, cultured marble and drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
Ice Hardened cryogenically treated for longer life. Optimized tooth form for faster cutting. Wide, angled and offset slots for easy plug access. Bi-metal construction with 8 percent cobalt for increased wear resistance. Kit includes: (9) hole saws; 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8" and 2-1/2", (2)arbors; 49-56-7010, 49-56-7250, (2) pilot bits; 49-56-8010 (assembled with arbors). Also includes convenient case for organization and transport.
|
Engineered to maximize runtime. Thin kerf design for high efficiency. Carbide teeth for long life. Self-feed pilot bit for fast, efficient cutting. Spring loaded collar automatically engages drive pins to prevent hole saws from locking to the mandrel. Kit includes: (3) hole saws - 2-1/8", 2-9/16" and 3-5/8", (1) Quick change Mandrel and (3) Self-feed Pilot bits.
|
|
|
|
|
|
|
|
|
|
|
|
|
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel..
|
Includes hole saws: 7/8", 1-1/8", 1-3/8", 1-1/2", and 2", Snap-Back 2L and 5L and carrying case.
|
The telescoping drill clamp fits drill and impact drivers large and small, including newer Lithium-Ion models. It also allows the tool to rotate 360? and lock into position. The adjustment wrench stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSHD navigates tight patterns and square cuts while cutting a variety of building materials. 18 gauge capacity in galvanized steel. Long-life, dual ball bearings. Use Replacement Blades TSHDRB.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aggressive tooth geometry, deep gullets for easy plug removal. Three hardened steel teeth provide maximum durability against unintended nail impacts; cuts up to 600 holes in wood without needing to be re-sharpened. Includes: (3) hole cutters: 2-1/8", 2-9/16", 3-5/8", (1) arbor with pilot bit, (2) pilot bits, (1) diamond file, (1) hex wrench and impact resistant case with storage space for additional hole cutters.
|
SnapLock plus mandrel system for quick and easy change with no down time. First carbide hole saws that allow operators to cut wood, nail embedded wood and metal using the same hole saw cup. 10 times faster cutting in hard materials. Tool free plug ejection for fast material removal. Variable tooth design delivers faster and easier drilling with less operator effort. 2-3/8" cutting depth for 40 percent deeper holes in 1 pass and increased productivity. For drilling wood, plastic, aluminum, metal and stainless steel. Carbide tipped. Set includes: (1) 1", (1) 1-1/8", (1) 1-3/8", (1) 1-1/2", (1) 2", (1) Mandrel, (1) Pilot bit and (2) Adapter Nuts - 1/2" and 5/8" thread.
|
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. 60 mm (2-3/8") cutting depth for 40 percent deeper holes in 1 pass and increased productivity. Delivers faster cutting performance and increased productivity versus standard bi-metal hole saws. This set includes a heavy duty durable case for easy and convenient storage of hole saws. 1 size fits all mandrel and Diablo saws from 5/8" to 6" diameter. Tool free plug ejection for fast material removal. Variable tooth design provides faster cuts with less vibration. Includes: (10 cups) size: 7/8" 1", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/2" and 2-9/16". Also includes Mandrel, Pilot bit and (2) Adaptor nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed steel teeth are reinforced to cut stronger, last longer, resists tooth strippage and withstands high torque. Includes: (1) one each: 7/8",1", 1-1/4", 1-3/8", 1-1/2", 1-3/4" 2-1/8", (2) arbors 5L, 6L, (1) pilot drill and carrying case.
|
This versatile and portable TurboShear fits a drill you already own to make easy cross cuts, fast lengthwise cuts and precise circular and square outlet cuts in large or small pattern corrugated metal roofing and common trapezoidal (box) pattern metal roofing panels. Elongated blades with compact jaws create a steep 75 degree offset so that the drill is held at a nearly vertical approach when starting a cut. As these offset blades follow the rising angle of a corrugated or trapezoidal profile, the drill handle or battery pack has clearance to naturally tip downward and still clear the roofing panel surface. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clam allow maximum portability and ease to go wherever the work is. The telescoping drill clamp adjusts to fit both length and width of popular drill sizes including smaller bodied Impact drivers. Optional spaces are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360? and set in any position for optimum tool clearance when navigating profiles or to facilitate easy material flow. The shear can operate at high or low speeds for the control you need to follow a precise life in 30 to 24 gauge (0.31-0.61mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades.
|
Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear. Fits the corded or cordless drill you already own. A compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operation. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360? and set in any position for optimum tool clearance. The blades of Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90? outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams. You can easily disengage the blades from the cutting path or quickly re-engage to continue cutting. The long lasting carbon steel blades are also easily replaced on the job.
|
|
|
|
|
|
|
|
|
|
|
|
|
Matrix II Bi-metal teeth, ice hardened for longer life, positive rake angle for fast cutting, radius tooth back reduces stress on teeth, deeper gullets for fast chip removal and functional slot geometry provides easy plug removal. Includes: 1", 2", 2-1/8", and 2-1/2" Bi-Metal Hole Saws; 7/8", 3/4", 1-3/8", 1-1/2", 1-1/8", 2-1/4", and 1-3/4 Hole Dozer Bi-Metal Hole Saws; 3/8" Hex Shank Arbor, (2) 3-1/2" Pilot Bits, 1/8" Hex Key, and 7/16" No Wobble Arbor.
|
The Universal Quick Change system allows you to use one mandrel for all sizes of hole saws with the help of two different sized nut adapters that fit most standard hole saws without the need of any additional tools. Progressive tooth design offers a powerful bite and an accelerated chip clearance. Plug removal is easy with a simple angled reinsertion of the pilot bit. Specs: arbor size 3/8", pilot bit diameter 1/4", pilot bit length 3-3/8". Includes: 7/8", 1", 1-3/8", 1-1/2", 1-3/4", 1-1/8", 2", 3", 2-1/8", 3/4", 2-1/2", (4) 9/16" to 1-3/16" adapter nuts, (7) 1-1/4" to 6" adapter nuts, (1) 3/8" mandrel, (2) 3-3/8" x 1/4" pilot bits, carrying case.
|
The telescoping drill clamp fits drills and impact drivers large and small, including newer Lithium-Ion models. It also allows the tool to rotate 360? and lock in position. The adjustment wrench stores with the tool preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Fast cutting blades are specialized for fiber cement siding only. The blade design minimizes dust. Wide skid plate design stabilizes for a precise clean cut, (including window and door arches) in fiber cement siding up to 5/16" (8mm). Replacement blade TSF1RB.
|
|