Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > HOLE SAWS - CARBON W/ARBOR
Sort By:
1
Vermont 16642 Countersink Dewalt DW2721 Replacement Drill Bit Dewalt DW2720 Replacement Drill Bit
Adjustable countersink blade adjusts to exact depth needed. Used in applications such as deburring and chamfering holes in soft metal and wood; 1/4" shank fits all drills. Black oxide coating for longer life on replacement drill bits with countersinks; split point drill bits start on contact and minimizes bit walk. Black oxide coating for longer life on replacement drill bits with countersinks; split point drill bits start on contact and minimizes bit walk.
Dewalt DW2722 Replacement Drill Bit Dewalt DW1588 Spade Drill Bit Extension BIT EXTENSION WOOD SPADE 6IN
Black oxide coating for longer life on replacement drill bits with countersinks; split point drill bits start on contact and minimizes bit walk. Heavy duty shank for maximum durability; hex shank prevents slipping and fits all 1/4" quick change systems; used for bit storage and wire pulling. Angle dimples scoop the wood to drill. Heat treated shaft resists bending under heavy loads.
Dewalt DW2712 Split Point Flip Drive Countersink Drill Bit Dewalt DW2711 Split Point Flip Drive Countersink Drill Bit Dewalt DW2710 Split Point Flip Drive Countersink Drill Bit
Multi cutter countersinks for superior finish in applications such as deburring and chamfering in iron, steel, soft metal, plastic, wood and other machine-able materials. Black oxide split-point drill bits start on contact. Multi cutter countersinks for superior finish in applications such as deburring and chamfering in iron, steel, soft metal, plastic, wood and other machine-able materials. Black oxide split-point drill bits start on contact. Multi cutter countersinks for superior finish in applications such as deburring and chamfering in iron, steel, soft metal, plastic, wood and other machine-able materials. Black oxide split-point drill bits start on contact.
Speedbor Max 3041015 Wood Boring Bit Irwin 1882786  Countersink Drill Bits Speedbor Max 3041001 Wood Boring Bit
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Irwin 1882787  Countersink Drill Bits Irwin 1882788  Countersink Drill Bits Lock-n-Load 4935703 Quick Change Drill Bit Extension
Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release.
Irwin 1882789  Countersink Drill Bits Irwin 1882790  Countersink Drill Bits Dewalt DW1589 Spade Boring Bit Extension
Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Heavy duty shank for maximum durability; hex shank prevents slipping and fits all 1/4" quick change systems; used for bit storage and wire pulling.
Irwin 1882791  Countersink Drill Bits BIT EXTENSION WOOD SPADE 12IN Speedbor Max 3041002 Wood Boring Bit
Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Angle dimples scoop the wood to drill. Heat treated shaft resists bending under heavy loads. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Daredevil DSBE1012 Straight Spade Drill Bit Extension Speedbor Max 3041014 Wood Boring Bit Vermont 18328 Industrial Duty Hole Saw
Designed for professional users seeking speed, ease of use and hole quality. A full cone threaded tip pulls the bit through the material with less effort and vibration. Contoured paddle delivers faster chip removal; 1/4" hex shank with poser groove reduces slippage. 12" straight extension. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. The super hard high speed steel cutting edge lasts longer; fits standard and plug ejecting mandrels. For heavy duty cutting in applications such as wood, plastics, composite materials and metal; 1-5/8" depth of cut.
Speed Feed 48-13-0048 Self-Feed Wood Bit Speedbor Max 3041004 Wood Boring Bit Dewalt DW2537 Rapid Load Countersink Drill Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish.
Speedbor Max 3041016 Wood Boring Bit Speedbor Max 3041005 Wood Boring Bit Speedbor 88702 Spade Drill Bit Extension
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. For all wood bits with 1/4" round shanks, three flats on shank. Follows 5/8" and larger bits through hole. Heavy-duty, double set screw type,  adds 6 to 12" to regular bit lengths. Forged of finest quality tool steel. Allen wrench included.
Dewalt DW2538 Rapid Load Countersink Drill Bit BIT AUGER 3/8IN               Speedbor Max 3041017 Wood Boring Bit
BIT AUGER 3/8IN
Our Price: $8.35
Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0058 Self-Feed Wood Bit Speedbor Max 3041007 Wood Boring Bit BIT AUGER 5/8IN
BIT AUGER 5/8IN
Our Price: $9.14
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
Quik-Lok 48-28-1000 Drill Bit Extension Speedbor Max 3041018 Wood Boring Bit Speed Feed 48-13-0068 Self-Feed Wood Bit
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Speedbor 88601 Spade Drill Bit Extension Speedbor Max 3041009 Wood Boring Bit Dewalt DW2567 Rapid Load Countersink Drill Bit
For all wood bits with 1/4" round shanks, three flats on shank. Follows 5/8" and larger bits through hole. Heavy-duty, double set screw type,  adds 6 to 12" to regular bit lengths. Forged of finest quality tool steel. Allen wrench included. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish.
Dewalt DW2568 Rapid Load Countersink Drill Bit Speed Feed 48-13-0078 Self-Feed Wood Bit BIT AUGER 1/2IN
BIT AUGER 1/2IN
Our Price: $10.13
Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
Dewalt DW2569 Rapid Load Countersink Drill Bit Speedbor Max 3041019 Wood Boring Bit Lock-n-Load 4935704 Quick Change Drill Bit Extension
Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release.
Irwin 1877714  Countersink Drill Bits Irwin 1882630  Countersink Drill Bits Irwin 1882781  Countersink Drill Bits
Precision ground 82 degree tip for countersinking most machinable metals, wood or plastic. High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces chatter for smoother drilling and extended life. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
Lock-n-Load 4935705 Quick Change Drill Bit Extension Irwin 1882782  Countersink Drill Bits Irwin 1882783  Countersink Drill Bits
Carbon steel construction sleeve and body. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits and the 1/4" Quick Change range now holds insert bits; magnetic for holding. Lock-n-Load system for one handed quick release. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
Irwin 1877715  Countersink Drill Bits Speed Feed 48-13-0088 Self-Feed Wood Bit Irwin 1882784  Countersink Drill Bits
Precision ground 82 degree tip for countersinking most machinable metals, wood or plastic. High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces chatter for smoother drilling and extended life. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
Power Drill I-100 49904 Dual Auger Bit Power Drill I-100 49905 Dual Auger Bit Real McCoy TAC10 Bi-Metal Hole Saw
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC11 Bi-Metal Hole Saw Real McCoy TAC12 Bi-Metal Hole Saw Real McCoy TAC14 Bi-Metal Hole Saw
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC15 Bi-Metal Hole Saw Power Drill I-100 49906 Dual Auger Bit Power Drill I-100 49907 Dual Auger Bit
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Power Drill I-100 49908 Dual Auger Bit Power Drill I-100 49909 Dual Auger Bit Power Drill I-100 49910 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speedbor Max 3041020 Wood Boring Bit Irwin 1882785  Countersink Drill Bits Real McCoy TAC16 Bi-Metal Hole Saw
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC17 Bi-Metal Hole Saw Real McCoy TAC18 Bi-Metal Hole Saw Real McCoy TAC19 Bi-Metal Hole Saw
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Power Drill I-100 49911 Dual Auger Bit Quik-Lok 48-28-1010 Drill Bit Extension Power Drill I-100 49912 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Real McCoy TAC20 Bi-Metal Hole Saw Real McCoy TAC21 Bi-Metal Hole Saw Irwin 12411 Carded Countersink
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed steel milled and precision ground to 82 degrees for countersinking into most machinable materials such as iron, steel, soft metals, plastic or wood.
Speed Feed 48-13-0108 Self-Feed Wood Bit Speedbor Max 3041021 Wood Boring Bit SPADE BIT EXTENSION QC 6IN
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Used to extend your reach when drilling and driving. It features a quick change pull mechanism for fast bit change without additional tools. Any bit with a 1/4" hex shank with power groove can fit into the extension.
BIT AUGER HEX SHANK WOOD 3/4IN Real McCoy TAC22 Bi-Metal Hole Saw Real McCoy TAC24 Bi-Metal Hole Saw
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC26 Bi-Metal Hole Saw Quik-Lok 48-28-1020 Drill Bit Extension BIT EXTENSION 3/8IN
BIT EXTENSION 3/8IN
Our Price: $13.36
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Extend your reach a full 12" when drilling with Milwaukee hole saw arbors. Secures with a hex key (included). The 3/8" hex fits 3-jawed chucks, 3/8" drill capacity and larger.
Vermont 16615 Standard Straight Screw Pilot Countersink Set Power Drill I-100 49913 Dual Auger Bit EXTENDER SPADE BIT 6IN
EXTENDER SPADE BIT 6IN
Our Price: $13.85
Used for smooth and fast cuts when countersinking and counterboring in wood, plastic and composition board applications. Replaceable drill bit. Fits #6, #8, #10 and #12 wood screws. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Impact ready bits with FlexTorq have increased durability for long life. CNC machined resulting in accurate manufacturing for optimal fit into screw recess. Reflex core allows 2" bits flex up to 15 degrees to reduce breakage. Magnetic screw lock system for fastener retention minimizes drops and reduces wobbling. Ideal for reaching tight spaces. 1/4" shank size. Includes (2) 1" Impact Ready FlexTorq PH2s.
Power Drill I-100 49914 Dual Auger Bit Milwaukee 49-56-9805 Thin Wall Hole Saw Irwin 12412 Carded Countersink
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. High speed steel milled and precision ground to 82 degrees for countersinking into most machinable materials such as iron, steel, soft metals, plastic or wood.
Irwin 12413 Countersink Power Drill I-100 49915 Dual Auger Bit Milwaukee 49-56-9810 Thin Wall Hole Saw
High speed steel milled and precision ground to 82 degrees for countersinking into most machinable materials such as iron, steel, soft metals, plastic or wood. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length.
Milwaukee 49-56-9815 Thin Wall Hole Saw Power Drill I-100 49916 Dual Auger Bit Real McCoy TAC28 Bi-Metal Hole Saw
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC30 Bi-Metal Hole Saw Real McCoy TAC32 Bi-Metal Hole Saw SPADE BIT EXTENSION QC 12IN
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Used to extend your reach when drilling and driving. It features a quick change pull mechanism for fast bit change without additional tools. Any bit with a 1/4" hex shank with power groove can fit into the extension.
Irwin Impact Performance Drill Bit Extension Milwaukee 49-56-9820 Thin Wall Hole Saw BIT AUGER 1IN
BIT AUGER 1IN
Our Price: $16.50
Irwin Drill Bit Extension, Series: Impact Performance, 3/4 in Diameter, 6 in Overall Length, Quick Change Shank, Oxide, Black, Suitable For Use With: 1/4 in Hex Shank Accessories Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material.
Dewalt Impact Ready D180018IR Bi-Metal Thin Wall Hole Saw Vermont 16515 Screw Pilot Countersink Set EXTENDER SPADE BIT 12IN
EXTENDER SPADE BIT 12IN
Our Price: $17.01
Double tooth design strengthens each tooth for longer life and improved durability. Sharper tooth geometry cuts materials faster for faster drilling. Thick hardened backing plates prevent thread stripping. Deep cut style hole saw cuts more material in 1 pass. Used for smooth and fast cuts when countersinking and counterboring in  wood, plastic and composition board applications. Fits all corded and cordless screwdrivers, drills and screwguns;  1/4" hex shank, replaceable drill bit. Fits #6, #8, #10 and #12 wood screws. Magnetic screw lock accessories help minimizes drops and reduce wobbles. 1/4" hex shank. Includes (2) 1" Impact Ready Flex Torq PH2s. Ideal for reaching tight spaces.
Milwaukee 49-56-9825 Thin Wall Hole Saw Milwaukee 49-56-9830 Thin Wall Hole Saw Dewalt DW1665 Power Ship Auger Bit
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Milwaukee 49-56-9835 Thin Wall Hole Saw Dewalt Impact Ready D180020IR Bi-Metal Thin Wall Hole Saw Irwin Impact Performance Drill Bit Extension
Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. 2.5" length. Fast metal drilling speeds for double tooth design. Easy plug removal for ejection spring. Raised shoulder helps to prevent the drill from breaking through the material when hole is complete. Thin-walled design optimum metal drilling efficiency. Sharper tooth geometry. Thick, hardened backing plate. Deep-cut style. Increased high speed steel height Irwin Drill Bit Extension, Series: Impact Performance, 3/4 in Diameter, 12 in Overall Length, Quick Change Shank, Oxide, Black, Suitable For Use With: 1/4 in Hex Shank Accessories
Speedbor Max 3041003 Drill Bit Set Dewalt Impact Ready D180022IR Bi-Metal Thin Wall Hole Saw HOLESAW CARBIDE GP 1IN 25MM
Tri-Flute design for faster chip ejection; cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4" quick change chucks. Includes (1) each: 5/8", 3/4", 1" and case. Fast metal drilling speeds for double tooth design. Easy plug removal for ejection spring. Raised shoulder helps to prevent the drill from breaking through the material when hole is complete. Thin-walled design optimum metal drilling efficiency. Sharper tooth geometry. Thick, hardened backing plate. Deep-cut style. Increased high speed steel height Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
Real McCoy TAC33 Bi-Metal Hole Saw Real McCoy TAC34 Bi-Metal Hole Saw Real McCoy TAC36 Bi-Metal Hole Saw
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC38 Bi-Metal Hole Saw HOLESAW CRBD GP 1-1/16IN 27MM HOLESAW CRBD GP 1-1/2IN 38MM
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
Dewalt DW1667 Power Ship Auger Bit HOLESAW CRBD GP 1-5/8IN 41MM  HOLESAW CRBD GP 1-1/8IN 29MM
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
HOLESAW CRBD GP 1-3/4IN 44MM  Real McCoy TAC40 Bi-Metal Hole Saw Real McCoy TAC42 Bi-Metal Hole Saw
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC44 Bi-Metal Hole Saw Real McCoy TAC46 Bi-Metal Hole Saw Power Drill I-100 49918 Dual Auger Bit
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
HOLESAW CRBD GP 1-1/4IN 32MM  Real McCoy TAC48 Bi-Metal Hole Saw Real McCoy TAC50 Bi-Metal Hole Saw
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used.
Real McCoy TAC52 Bi-Metal Hole Saw Real McCoy TAC56 Bi-Metal Hole Saw HOLESAW CRBD GP 1-7/8IN 48MM
High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
Dewalt DW1669 Power Ship Auger Bit HOLESAW CRBD GP 1-3/8IN 35MM  Dewalt DW1671 Power Ship Auger Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
HOLESAW CARBIDE GP 2IN 51MM   Speed Slot 1772953 Bi-Metal Hole Saw Irwin 4935655 Quick Change Bit Holder
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Reinforced to cut stronger, last longer and resists tooth strippage. High speed steel teeth resist breaking and offer extended life. Thick backing plate with holes for drive pins resists damage due to high torque. Carbon steel construction sleeve and body for durability and life. Lock-n-Load system for one-handed quick release. Jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. The 7/16" Quick Change range now holds insert bits; magnetic for holding.
Dewalt DW1673 Power Ship Auger Bit Dewalt DW1672 Power Ship Auger Bit WeldTec 3043004 Power Ship Auger Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
HOLESAW CRBD GP 2-1/8IN 54MM  Irwin 1877720 Countersink Drill Bits Dewalt DW1680 Power Ship Auger Bit
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Precision ground 82 degree tip for countersinking most machinable metals, wood or plastic. High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces chatter for smoother drilling and extended life. Set includes: (1) 1/2", (1) 5/8" and (1) 3/4" countersink. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Dewalt DW1681 Power Ship Auger Bit WeldTec 3043005 Power Ship Auger Bit WeldTec 4935570 Power Ship Auger Bit
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank
Irwin 1882793  Countersink Drill Bit Set HOLESAW CRBD GP 2-1/4IN 57MM  AUGER BIT 1/2IN X 17IN
AUGER BIT 1/2IN X 17IN
Our Price: $25.57
Tapered drill with widened flutes for drilling fast, clean pilot holes. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth counter sinking. Counterbore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. 1/4" quick change shank reduces slipping in standard chucks and is compatible with all 1/4" quick change chucks, including impact drills. Set includes: (1) small depth stop, (1) #6, (1) #8, and  (1)#10 bit. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
Milwaukee 48-13-0400 Speed Feed Wood Bit Set Real McCoy TAC64 Bi-Metal Hole Saw HOLESAW CRBD GP 2-3/8IN 60MM
6-1/2" speed feed wood bit set. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Set includes: (1) 1" spur auger bit, (1) 1/2" spur auger bit, (1) 3/4" spur auger bit and (1) 5/8" spur auger bit. High speed hole saw with built in arbor. Used in applications such as cutting wood, plastic, or any machinable metal, including tool steel and stainless steel. Pilot drill must be used. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
WeldTec 3043006 Power Ship Auger Bit Dewalt DW2535 Countersink Set HOLE SAW WOOD CARBIDE 2-9/16IN
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drill, countersink and counterbore in one step. Four cutter countersinks and replaceable tapered drill bits provide superior speed and finish. Universal 1/4" hex shank locking system prevents slipping. Includes: #6 (9/64"), #8 (11/64") and #10 (3/16") countersinks. Carbide teeth for long life. Thin kerf design for high efficiency. 1800 max rpm.
WeldTec 3043007 Power Ship Auger Bit BIT AUGER 9/16X18IN           Dewalt DW1682 Power Ship Auger Bit
BIT AUGER 9/16X18IN
Our Price: $26.96
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Quik-Lok 48-28-1030 Drill Bit Extension Dewalt DW1683 Power Ship Auger Bit HOLESAW CRBD GP 2-1/2IN 64MM
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
Dewalt DW1674 Power Ship Auger Bit AUGER BIT 5/8IN X 17IN        HOLESAW CRBD GP 2-5/8IN 67MM
AUGER BIT 5/8IN X 17IN
Our Price: $27.64
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal. Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
WeldTec 3043008 Power Ship Auger Bit HOLESAW CRBD GP 2-11/16IN 68MM Daredevil DSBE1006 Straight Spade Drill Bit Extension
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Designed for professional users seeking speed, ease of use and hole quality. A full cone threaded tip pulls the bit through the material with less effort and vibration. Contoured paddle delivers faster chip removal; 1/4" hex shank with poser groove reduces slippage. 12" straight extension.
HOLESAW CRBD GP 2-3/4IN 70MM  WeldTec 3043009 Power Ship Auger Bit HOLESAW CRBD GP 3IN 76MM
HOLESAW CRBD GP 3IN 76MM
Our Price: $28.79
Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drills clean wood, nail-embedded wood, plastic, aluminum, metal, cast iron and stainless steel. Delivers 20 times longer cutting life than bi-metal, these new carbide tipped hole saws offer faster performance and increased productivity. Cutts deeper holes in 1 pass. Tool free plug ejection for fast material removal. Snap-Lock mandrel system for a quick and easy change with no down time.
Quik-Lok 48-28-1040 Drill Bit Extension Speedbor MAX Speed Clam Drill Bit Set Dewalt DW1685 Power Ship Auger Bit
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Tri-flute design for faster chip ejection. Cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard 1/4" quick change chucks. Comes with a heavy-duty case. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
Milwaukee 48-13-5750 Ship Auger Bit WeldTec 3043011 Power Ship Auger Bit AUGER BIT 3/4IN X 17IN
AUGER BIT 3/4IN X 17IN
Our Price: $31.01
7/16" hex shank wood boring bits. 15" flute. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
Quik-Lok 48-28-1050 Drill Bit Extension BIT AUGER 7/8X18IN            Dewalt DW1686 Power Ship Auger Bit
BIT AUGER 7/8X18IN
Our Price: $31.47
Hardened shank for maximum durability; tool-less quick change; no hex key needed. Universal Quik-Lok. Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench. Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes.
WeldTec 3043010 Power Ship Auger Bit Dewalt DW1687 Power Ship Auger Bit Speedbor Max 3041006 Drill Bit Set
Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Tri-Flute design for faster chip ejection; cutting spurs have 3 cutting edges for added durability. Full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck. Fits all standard 1/4" quick change chucks. Includes (1) each: 1/2", 5/8", 3/4", 7/8", 1" and 1-1/4".
Real McCoy TA66 Bi-Metal Hole Saw Irwin 1877793 Countersink Drill Bits Milwaukee 48-13-6000 Ship Auger Bit
Variable pitch,4/6 pitch, positive rake teeth reduce vibration and clear chips to improve cutting speed; attached pass through shank arbor is convenient and time-saving; requires 4-5/16" pilot drill. Used in applications such as cutting holes in wood, plastic or any machinable metal including nail-embedded wood, plywood, pipe and stainless steel.. Precision ground 82 degree tip for countersinking most machinable metals, wood or plastic. High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces chatter for smoother drilling and extended life. Set includes: (1) 1/4", (1) 3/8", (1) 1/2", (1) 5/8" and (1) 3/4" countersink. 7/16" hex shank wood boring bits. 15" flute.
Wolfcraft 2590405 Screwsetter Bit Set Irwin 44801 Drill Press Adjustable Wood Bit AUGER BIT 7/8IN X 17IN
AUGER BIT 7/8IN X 17IN
Our Price: $34.58
Drill, countersink, and counterbore in one easy operation also allows flathead screws to sit level with the wooden surface and is adjustable allowing for different hole depths. Drilling deeper creates a counterbore for the use of a wooden plug. Use with portable drills and drill presses. Includes; #6, #8, #10, and  #12 screw setter. Adjustable cutting blade bores a variety of hole sizes. Cuts 19 size holes in increments of 1/8". Lockhead screw securely holds blade at desired boring diameter. Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
HOLE SAW WOOD CARBIDE 3-5/8IN WeldTec 3043013 Power Ship Auger Bit BIT AUGER 18X15/16IN
BIT AUGER 18X15/16IN
Our Price: $36.26
Carbide teeth for long life. Thin kerf design for high efficiency. 500 max rpm. Wide flutes with a harder cutting edge that is welded to the base material; Quick Change impact shank Drills through up to 2 times the nails of competitive auger bits without needing re-sharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. Durable hardened, one-face 20? rake angle design enhances nail resistance, chip removal and fast, easy sharpening. Fast chip removal: non-stick, polished and coated flutes eliminate costly cleaning time. Impact-rated shank is strong enough to use with an impact wrench.
Dewalt DW1688 Power Ship Auger Bit Milwaukee 49-22-4800 Hole Saw Set AUGER BIT 1IN X 17IN
AUGER BIT 1IN X 17IN
Our Price: $37.35
Hardened alloy steel for bit life, self feed spur for fast material penetration, dual cutting edge for maximum durability in nails with a ball groove shank allows for quick bit changes. Thin wall hole saw gives professionals a hole making solution with impact drivers. 1/4" quick change hex shank.  Utilizing a thin wall, 8 TPI design, delivers a burr-free cut faster than standard bi-metal hole saws. The included ejection spring removes the frustration of manually removing slugs by automatically ejecting the material. A stop shoulder design prevents over-drilling into material and potentially damaging inner components of electrical and junction boxes. For use in plastics and thin gauge metals up to 1/8" thick. Includes Thin wall hole saw sizes: 7/8" (49-56-9810), 1-1/8" (49-56-9820) and 1-3/8" (49-56-9830). Designed to be easy in wood and tough against nail hits. A unique double cutter and reamer edge provide improved hole quality. A reinforced spine delivers additional strength during aggressive drilling. Wider flutes engineered for better chip removal.
Dewalt DW1676 Power Ship Auger Bit WeldTec 4935572 Power Ship Auger Bit Dewalt DW1690 Power Ship Auger Bit