|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch Glass and Tile Bit, 4-Piece, Precision Ground, Series: GT Series, 1/8 in Diameter, 2 in Overall Length, 1/8 in Shank, 3 Flat Shank, Tungsten Carbide Cutting Edge, For Relief Holes for Glass Cutting, Bathroom/Shower Installs, Towel/Shower, Rods and Soap Dishes, Drilling and Fastening Mirrors and Setting Concrete Screws-In Tile
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 1-1/4 - 4" fastener length.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
|
Carbide tipped bit head is harder and more resistant to extreme loads; 4-flutes for fast dust removal. For use in drills requiring SDS-plus shanks and Tapcon/Condrive systems, hex drive on bit fits into driver sleeve.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide tipped bit head is harder and more resistant to extreme loads; 4-flutes for fast dust removal. For use in drills requiring SDS-plus shanks and Tapcon/Condrive systems, hex drive on bit fits into driver sleeve.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 2 - 3 -1/2" fastener length.
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
Flute is designed for fast removal of the concrete dust from the hole. Bits have a carbide vacuum brazed to heat treated steel shanks. Fits hex 5/16" Condrive sleeve for Tap-Con screw system
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 1-1/4 - 4" fastener length.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Flute is designed for fast removal of the concrete dust from the hole. Bits have a carbide vacuum brazed to heat treated steel shanks. Fits hex 5/16" Condrive sleeve for Tap-Con screw system
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Rock carbide tip maximizes carbide surface contact for longer bit life while the U-flute cleans debris out for fast, efficient drilling. The hex shank interlocks with drive sleeve, allowing for quick change from drilling to driving.
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life while the U-flute cleans debris out for fast, efficient drilling. The hex shank interlocks with drive sleeve, allowing for quick change from drilling to driving.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-bit construction gives you the extra reach you need without screw extensions. Sharp cutting edge promotes easy wood boring, faster chip removal and reduced vibration. Double wing spurs allow for fast, clean hole cutting. Versatile 1/4" Quick change hex shank can be used in all universal Quik-Lok extensions.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
Blue groove point and cutting edge for faster chip removal, double cutting spurs scribe the outside of the hole reducing breakout. Grooved hex shank prevents slipping in drill chuck or bit extension and fits all standard quick change chucks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full cone threaded tip provides the speed needed to drill faster by pulling the bit through the material with Features a full cone threaded tip for fast drilling, contoured paddle for fast chip removal, hex shank power groove to reduce slippage and spur and reamer tips for cleaner holes. Use in applications such as drilling in hardwoods, composites, treated lumber, railroad ties and other wood products.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite, china drilling fastener holes in bathroom tile or for wall mirror.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
|
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
Optimized for heavy-duty rotary hammers. Less carbide wear than two cutters means end user is more productive with each bit. No jamming when hitting rebar. Diffusion bonding technology provides stronger carbide bond for the longest lasting bit. Wear marks assures hole diameter tolerance for anchoring applications. Centric conical tip results in precise hole diameters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
|
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Carbide tipped for long life in tough applications. Bit runs cooler thanks to improved flute design. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSO specification. Optimized brazing and hardening process for long life. Bosch-made carbide tips are tougher and more durable under heavy loads. Set includes: (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 1/4" x 4" x 6", (1) 3/8" x 4" x 6" and (1) 1/2" x 4" x 6". Also includes a reusable rugged case.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Chisel shaped tip breaks concrete quickly for faster penetration. Four fluted spiral shaft has dust removal. Includes 3/16" x 4-1/2", 1/4" x 6", 5/16" x 6", 3/8" x 6", and 1/2" x 6".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two cutting edges made up of sharpened carbide angles for cutting faster more rounded holes; flute ensures the removal of more concrete dust from the hole to help prevent binding.
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Optimized brazing and hardening process for long life. Wear mark alerts user when tip wears beyond ANSO specification. Bit runs cooler thanks to improved flute design. Brute Tough storage case for easy access, organizing and portability. The set includes: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 3/8" x 4" x 6", (1) flat chisel and (1) point chisel.
|
Rock carbide tip for longer bit life and a 4 flute design that cleans debris out for fast, efficient drilling in concrete, masonry, artificial stone, and rock; fits into standard 3/8" and 1/2" chucks. Includes 3/16"x6-1/2", 1/4"x4", 1/4"x6", 3/8"x6", 1/2"x6" bits and case.
|
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Optimized brazing and hardening process for long life. Bosch made carbide tip is tougher and more durable under heavy loads. Ideal for anchoring and through-hole applications in concrete. Proprietary Bosch hardening process results in more holes per bit.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit is made of high quality rotary carbide, for long drilling life with a tapered shank body; flute geometry removes metal shavings quickly with less vibration and weight. For use with most common rotary hammers in rotation mode.
|
Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit is made of high quality rotary carbide, for long drilling life with a tapered shank body; flute geometry removes metal shavings quickly with less vibration and weight. For use with most common rotary hammers in rotation mode.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
|
Carbide tipped bit head is harder and tougher with four chiseling faces and cutting edges. Hammer bits fits Bosch SDS-Max hammers, also other SDS-Max drive hammers, Hilti hammers using TE-Y and TE-FY shanks.
|
Bit is made of high quality rotary carbide, for long drilling life with a tapered shank body; flute geometry removes metal shavings quickly with less vibration and weight. For use with most common rotary hammers in rotation mode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bit is made of high quality rotary carbide, for long drilling life with a tapered shank body; flute geometry removes metal shavings quickly with less vibration and weight. For use with most common rotary hammers in rotation mode.
|
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary hammers.
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bits with Quadro-X feature an extra strength tip for longer life and faster drilling. Updated tip and head provides 15 percent faster removal rate and 30 percent longer life; the 4-cutter head is fast with accurate drilling and true round holes for anchors.
|
Heavy duty bit has a high diamond concentration for excellent footage and drilling speed; used for all types of wet drilling in applications with light to moderate steel.
|
|
|
