Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > SELF FEED BITS & ACCESSORIES
Sort By:
1
Irwin 3521993C Power Bit Set Irwin 3532993C Double End Bit Set TORX BIT SET 6 PIECE
Made of shock resistant tool steel; fits directly into the power drill chuck or Quick-Change chuck adapter; 1/4" hex shank. Includes (1) one each: #1, #2, and #3 bits. Industrial quality bits are manufactured to withstand the same high-torque use as Irwin power bits; 1/4" hex shank. Includes (1) one each: #1PH/6-8 Sl., #2PH/8-10 Sl., #3PH/10-12 Sl. Fully hardened and tempered for long bit life under constant heavy-duty use. The tip is precision formed for proper use. Use when driving heat-treated or case-hardened screws such as sheet metal, self-tapping or self-drilling. Made of the highest quality S2 tool steel for durability. A proven sub-zero tempering process gives these bits extended life. Shank diameter 0.25; Shank 1/4". Bit set includes: (1) T10, (1) T15, (1) T20, (1) T25, (1) T30 and (1) T40.
Dewalt DW2067 Screwdriver Bit Set BLADE STL SMTH CUT 108TX6.5IN Dewalt DW2069 Drive Bit Set
Fire temper heat treated for longer bit life. Contains 7 bit tips for Torx screws: T10, T15, T20, T25, T27, T30,  T40. Precision ground and sharpened teeth that can be resharpened. Hardened blade body. Designed for smooth cuts in plywood. Shock resistant steel for maximum durability. Heat treated for longer life. Drive guide sleeve reduces wobble. Heavy duty magnet keeps bits in place. Sliding soft grip lock keeps case closed. Bit retention system keeps bits secure; 1/4" hex shank. Includes (1) one each:  #1, #2, #3.
BIT SET SCREWDRIVER 5PC       Irwin 1866972 Fastener Driver Bit Set Bosch GT Series 4-Piece Precision Ground Glass and Tile Bit
BIT SET SCREWDRIVER 5PC
Our Price: $6.04
Includes (1) one each: #1 and #2 Phillips, #1 and #2 Square recessed , 6-8 Slotted screwdriver bits. Irwin Fastener Driver Bit Set, Series: 1866972, 5 Pieces, Includes: 2 in NO 1, NO 2 and NO 3 Phillips, NO 2 Square and Star T25 Bits, Tool Steel, 1/4 in Shank Bosch Glass and Tile Bit, 4-Piece, Precision Ground, Series: GT Series, 1/8 in Diameter, 2 in Overall Length, 1/8 in Shank, 3 Flat Shank, Tungsten Carbide Cutting Edge, For Relief Holes for Glass Cutting, Bathroom/Shower Installs, Towel/Shower, Rods and Soap Dishes, Drilling and Fastening Mirrors and Setting Concrete Screws-In Tile
Irwin 1903520 Impact Double End Bit Set Irwin 1903521 Impact Double End Bit Set Irwin 1903522 Impact Double End Bit Set
Impact double-ended power bits with precision tip. Provides better fit with less stripping. DoubleLok technology ensures both ends of bit lock securely in impact drivers and quick-change chucks, enabling use of two tips from one bit for added convenience and extended life. Precision tip geometry delivers superior fitment, reducing stripping and cam-out. Power groove designed for compatibility with Irwin Impact Performance series Magnetic Screw Hold Attachment. Manufactured with Heavy-duty, cold forged high-grade steel to withstand high torque output. Includes: (2) #2SQ/#2SQ, #1SQ/#2SQ, #2SQ/#3SQ and attachment. DoubleLok technology ensures both ends of bit lock securely in impact drivers and quick-change chucks, enabling use of two tips from one bit for added convenience and extended life. Precision tip geometry delivers superior fitment, reducing stripping and cam-out. Power groove designed for compatibility with Irwin Impact Performance series Magnetic Screw Hold Attachment. Manufactured with Heavy-duty, cold forged high-grade steel to withstand high torque output. Includes: T15/T20, T20/T25, T25/T30, T25/T25 and attachment.
Black & Decker 16900 Glass and Tile Drill Bit Shockwave 48-32-4615 Impact Duty Drive Bit Set Dewalt DW5226 Percussion Masonry Drill Bit
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. Impact duty insert bits are engineered for extreme durability and long life. Made from proprietary steel and heat treated to control hardness and for shock absorption. Forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. Assorted 1'' Torx insert bits handle a variety of jobs and applications. Includes: 1'' Torx Bits - (1) T10, (1) T15, (1) T20, (1) T25, (1) T27, (1) T30 and (1) T40. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Hanson 50508 Economy Glass and Tile Drill Bit Black & Decker 16901 Glass and Tile Drill Bit Vermont 16329 Insert Bit Set
Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. Flatted shanks for better grip in standard drill chucks. Heat-treated for longer bit life. Ribbed tip also helps reduce cam-out (on select Phillips and Slotted styles).Universal 1/4" hex shank with power groove. Fits standard quick-change drivers. Includes (1) each:  Phillips #1 & #2; & sizes 6 to 8 & 8 to 10 slotted power bits.
Irwin 11820ZR Combination Circular Saw Blade ALLEN BIT SET 7 PIECE         BIT HAMMER DRILL 1/4X10X12IN
Heavy gauge high carbon steel for extended life with precision ground teeth for smooth, accurate cuts; fully hardened plate runs truer longer. Clic-Change bit system features true one-handed load and release. .025" shank diameter. Change bits quickly without re-chucking. Carbide material. Fits all 3/8" and 1/2" drills. Insert bits include: (1) 9/64", (1) 5/64", (1) 3/32", (1) 1/8", (1) 5/32", (1) 3/16" and (1) 7/64". The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Irwin 1892092 Impact Double End Bit Set Irwin 1892093 Impact Double End Bit Set Irwin 1882352 Impact Double End Bit Set
Impact double-ended power bits with precision tip. Provides better fit with less stripping. Impact double-ended power bits with precision tip. Provides better fit with less stripping. 3 piece set contains (1) T15-T20, (1) T20-T25 and (1) T25-T30. Impact double-ended power bits with precision tip. Provides better fit with less stripping.
Irwin 1882353 Impact Double End Bit Set Hanson 50512 Economy Glass and Tile Drill Bit BIT INSERT SECURITY SET 9PC
Impact double-ended power bits with precision tip. Provides better fit with less stripping. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china. Milwaukee Shockwave Impact duty bits are engineered to be very durable. The optimized Shockzone geometry is unique for each tip to provide longer life and absorb more torque. The precise fit custom machined tip prevents stripping and reduces wobble, while the custom Alloy76 steel proprietary heat treat process maximizes resistance to wear and shock. For use with security screws. 9 piece set includes: (1) T20 security insert bit, (2) T25 security insert bit, (1) T30 security insert bit, (1) 1/8" hex security insert bit, (1) 5/32" hex security insert bit, (1) spanner #10 insert bit, (1) clutch 5/32" insert bit and (1) clutch 3/16" insert bit.
Irwin 1866976 Power Bit Set Irwin 11220 Combination Circular Saw Blade Black & Decker 16902 Glass and Tile Drill Bit
Irwin Power Bit Set, Series: 1866976, 5 Pieces, Includes: NO 1, NO 2 and NO 3 Phillips, NO 2 Square, T25, 2 in Power Bit Pocket and Case, Steel, 1/4 in Shank, For Driving, Drilling, Tightening and Removing Fasteners Heavy gauge high carbon steel for extended life with precision ground teeth for smooth, accurate cuts; fully hardened plate runs truer longer. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
BIT INS TORX SECURITY SET 10PC Dewalt DW5229 Percussion Masonry Drill Bit Irwin 5026011 Rotary Percussion Masonry Drill Bit
Milwaukee Shockwave Impact duty bits are engineered to be very durable. The optimized Shockzone geometry is unique for each tip to provide longer life and absorb more torque. The precise fit custom machined tip prevents stripping and reduces wobble, while the custom Alloy76 steel proprietary heat treat process maximizes resistance to wear and shock. For use with Torx security screws. 10 piece set includes: (1) T7 security insert bit, (1) T8 security insert bit, (1) T9 security insert bit, (1) T10 security insert bit, (1) T15 security insert bit, (1) T20 security insert bit, (1) T25 security insert bit, (1) T27 security insert bit, (1) T30 security insert bit and (1) T40 security insert bit. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Irwin 1903525 Impact Double End Bit Set Irwin 3515997C Insert Bit Set Dewalt DW2068 Bit Tip Set
DoubleLok technology ensures both ends of bit lock securely in impact drivers and quick-change chucks, enabling use of two tips from one bit for added convenience and extended life. Precision tip geometry delivers superior fitment, reducing stripping and cam-out. Power groove designed for compatibility with Irwin Impact Performance series Magnetic Screw Hold Attachment. Manufactured with Heavy-duty, cold forged high-grade steel to withstand high torque output. Includes: #2PH/#2PH, #2SQ/#2SQ, #2PH/#2SQ, T20/T25, T25/T25, 8-10SL/#2PH and attachment. Socket head insert bits. Includes point sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32". 1/4" hex shank. Contains 9 hex drive bits: 1/16", 5/64", 3/32",7/64",1/8", 9/64", 5/32", 3/16", 1/4".
Irwin 3514996C Tamper Resistant Insert Bit Set Irwin 326007 Rotary Percussion Masonry Drill Bit Bluegranite HCBG08 Hammer Drill Bit
Includes 1 each: T10, T15, T20, T25, T27 and T30. Used in applications such as control panels, display cases, high-tech equipment, security; 1/4" hex shank. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5231 Percussion Masonry Drill Bit Hanson 50516 Economy Glass and Tile Drill Bit Hanson 50524 Economy Glass and Tile Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
BIT DRILL HAMMER KIT 3PC      Dewalt DW2067SCR Security Torx Bit Set Hanson 50520 Economy Glass and Tile Drill Bit
BIT DRILL HAMMER KIT 3PC
Our Price: $11.21
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Set Includes: (1) 5/32" x 6" 3 Flat Secure Grip Hammer Drill Bit, (1) 3/16" x 6" 3-Flat Secure Grip Hammer Drill Bit and (1) 1/4" x 6" 3-Flat Secure Grip Hammer Drill Bit. S2 modified bits for increased durability. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Irwin 1866979 Insert Screwdriver Bit Set Black & Decker 71-933 Insert Bit Set Irwin 1840313 Impact Drive Guide Set
Irwin Insert Screwdriver Bit Set, Series: 1866979, 10 Pieces, Includes: NO 1 Phillips, (2) NO 2 Phillips, NO 3 Phillips, NO 1 Square, (2) NO 2 Square, NO 3 Square and T25 1 in Insert Bit, and 2-1/4 Inch Magnetic Bit Holder No C-Ring Pocket Case, Steel, 1/4 in Shank, 2 in Phillips Includes: (9) Phillips bit tips: (1) #1, (7) #2, (1) #3; 7 Slotted bit tips: (1) #6, (5) #8, (1) #10; 6 Square Recess bit tips: (1) #1, (4) #2, (1) #3; 4 Star bit tips: (1) #10, (2) #15, (1) #20; 4 Pozi Drive bit tips: (1) #1, (2) #2, (1) #3 and (1) magnetic bit tip holder. Set contains: (1) Impact power bit #1 Phillips, (1) Impact power bit #2 Phillips X 2'' OAL, (2) Impact power bit #1 Square recess X 2'' OAL, (1) Impact power bit #2 Square recess X 2'' OAL and (1) 1/4'' Quick change extension 2.5'' OAL.
Black & Decker 16903 Glass and Tile Drill Bit Irwin 1866983 Insert Screwdriver Bit Set Dewalt DW2506CS Rapid Load Screwdriver Bit Set
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. Irwin Insert Screwdriver Bit Set, Series: 1866983, 10 Pieces, Includes: NO 1 Phillips, (2) NO 2 Phillips, NO 3 Phillips, NO 1 Square, (2) NO 2 Square, NO 3 Square and T25 1 in Insert Bit, Impact Magnetic Bit Holder with 2-1/4 in C-Ring Pocket Case, Tool Steel, 1/4 in Shank, For Driving, Drilling, Tightening and Removing Fasteners Features quick and easy accessory changes with Quick Change accessory system. Hex shank locking system prevents bits from slipping. Rapid load holder fits all brands of corded/cordless 3/8" or1/2" drills. Includes (1) each: Rapid load holder (corded), #1, #2 Philips, #2 Square Recess, #8 , #10 Slotted.
Dewalt DW5236 Percussion Masonry Drill Bit SCREW FEED/SET SMALL          Dewalt DW2160 Screwdriver Bit Set
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Includes 5 feed screws, hex key 3 set screws. For self-feed bits up to 2-9/16". Includes: (1) #1 Phillips insert bit tip, (2) #2 Phillips insert bit tips, (1) #3 Phillips insert bit tip, (2) #8 slotted  insert bit tips, (2) #2 square recess bit tips, (1) #2 Phillips 2" power bit, (1) #2 square recess 2" power bit, (1) #1 Phillips 3-1/2" power bit, (1) #2 square recess 3-1/2" power bit, (1) compact magnetic drive guide and case.
Irwin 326012 Rotary Percussion Masonry Drill Bit BIT MASONRY IMPACT RDY 3PC SET BIT HAMMER DRILL 3/8X10X12IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Innovative flute design leading to faster material removal for easier drilling. 1/4" hex shank for use in impact drivers. Speed tip penetrates material quickly. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Dewalt DW5204 Percussion Drill Bit Set Dewalt DW5242 Percussion Masonry Drill Bit Hanson 50532 Economy Glass and Tile Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life. Four flute design cleans debris out for fast, efficient drilling in applications such as drilling small diameter holes in masonry, concrete, rock, and artificial stone; three flats on shank eliminate bit slipping in chuck. Includes: 3/16"x3", 1/4"x4", 5/16"x6", and 3/8"x6". Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tipped for long life with spear pointed tip that reduces breakouts when drilling from 1 side. Provides smooth, accurate drilling in applications such as ceramic tile, mirrors, glass, marble tile, vitrolite and china.
Black & Decker 16904 Glass and Tile Drill Bit Bluegranite HCBG18T/HCBG18 Hammer Drill Bit Irwin 326016 Rotary Percussion Masonry Drill Bit
Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT SET SCREWDRIVING 32 PIECE BIT SET PRO MIX 33PC          Dewalt DW2571 Rotary Drill Bit Set
BIT SET PRO MIX 33PC
Our Price: $16.50
Designed to withstand the torque generated by today's high powered impact drivers. Forged tip bits to reduce breakage. Torsion zone absorbs torque peaks reducing stress and the tip. Hardened core increases bit strength. Engineered for high torque applications. Black Oxide coating resists corrosion. 32 piece set includes: (1) R1, (5) R2, (1) R3, (1) T15, (2) T20, (4) T25, (1) T30, (2) PH1, (8) PH2, (4) PH3, (1) PHR2, (1) P2R2 and (1) magnetic bit holder. Includes: #0, #1, #2, #3 Square Recess, #1, #2, #3 Phillips and 2 Drywall bits, #3-4, #6-8, #8-10, #10-12 Slotted, #T8, T9, T10, T15, T20, T25, T27, T30, T40 Star/Torx, #0, #1, #2, #3 Pozidrive, 2, 2.5, 3, 4, 5, 5.5, 6 Hex and magnetic holder. Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits.
BIT DRILL PERC 5PC 1/8 - 3/8IN Irwin 326020 Rotary Percussion Masonry Drill Bit BIT HAMMER DRILL 1/2X10X12IN
Percussion bits in a space efficient case with pilfer proof tab. Set includes: 1/8", 3/16", 1/4", 5/16" and 3/8". Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
SCREWDRIVER BIT SET47PC       Irwin 1866985 Drawer Case Set Dewalt DW5245 Percussion Masonry Drill Bit
Especially useful for burying long screws in treated lumber and metal. Power groove fits all quick change systems. Titanium tough grip coating protects each gripping point and reduces slippage. Designed to withstand the high torque associated with today's power impact drivers. Forged tips create a stronger and more flexible torsion zone, reducing breakage and extending bit life. Compact, flat design for convenient storage in drawers and tool cabinets. Molded ABS resin case holds up to rigors of daily use. Easy-to-read size markings provide simple identification of set contents. Easy-to-use sliding latch design keeps case securely closed when not in use. Holds (30) 1" insert bits and a bit holder. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Artu 1425 Porcelain Tile Bit Dewalt DW2162 Screwdriver Bit Set Black & Decker 16905 Glass and Tile Drill Bit
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. Heavy duty magnet holds bits in place for fast screwdriving, Shock-resistant steel, heat-treated for longer life and bit retention system keeps bits secure. Screwdriving and Nutdriving Set includes: (1) #1 Phillips, (10) #2 Phillips, (1) #3 Phillips bit tips, (1) #6, (2) #8, (1) #10 slotted bit tips, (1) #1 square recess, (6) #2 square recess, (1) #3 square recess, (1) #2 Phillips power bit, (1) #2 square recess power bit, (1) 1/4" magnetic nut driver, compact magnetic drive guide and plastic case. Smooth drilling in glass, tile, mirrors, and ceramics. Ideal for use when fastening items to tile. Easily resharpened. For all 3/8" or larger drills.
Artu 1430 Porcelain Tile Bit Bluegranite HCBG21 Hammer Drill Bit DRILL BIT HAMMER START SET 5PC
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Robust head for longer life. Various useable lengths. Milled u-flutes with deep cut-spiral for fast dust removal. Diamond ground carbide tip for precise starts to avoid scratching and skating in tile and hard stone. PowerGrip shank for aggressive gripping power. Comes with a convenient pouch for easy storage. The set includes: (1) 5/32" x 2" x 3", (1) 3/16 x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16 x 4" x 6", (1) 3/8" x 4" x 6".
SCREWDRIVER SET 18PC          Secure-Grip 48-20-8851 Hammer Drill Bit Set Artu 1435 Porcelain Tile Bit
SCREWDRIVER SET 18PC
Our Price: $20.16
Harden steel bits for use in all drill/drivers. Bit retention system keeps bits secure. 1/4" hex shank. Includes: Compact Magnetic Drive Guide; 2" Power Bits: (5) PH2, (1) SQ2; 1" Phillips Bits: (1) PH1, (2) PH2, (1) PH3; 1" Slotted Bits: (2) SL8; 1" Square Bits: (2) PH2, 2-3-1/2" Phillips Bit: (2) PH2, 1-3 1/2"; Square Bits: (1) SQ2 in a tough plastic case. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Includes 5/32" x 6", 3/16" x 6", 1/4" x 6", 5/16" x 6" and 3/8" x 6". For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
Dewalt DW5207 Percussion Drill Bit Set Dewalt DWMTC15 Magnetic Tough Case Set Irwin 4935076 Hammer Drill Bit Set
Rock Carbide bits with four flute carbide head that provides longer bit life with a special enlarged flute design that channels debris out of the hole for fast, efficient drilling into masonry, concrete, rock, and artificial stone. The bits in this set are intended to make holes for mechanical anchors. No-Spin Shank to eliminate bit slippage; used with 3/8" and 1/2" sized chucks. Includes: 3/16"x3", 1/4"x4", 5/16"x6", 3/8"x6", 1/2"x6" and (2) 1/4"x6". Features two high strength magnets that allow to be fixed to any ferrous surface. Built in hooks allow the case to hang anywhere. Impact resistant material adds increased durability to prevent breakage. Includes: (1) 2" Phillips #2; (1) 2" Square #2; (2) 1" Slotted #8; (3) 1" Phillips #2l (1) 1" Phillips #3; (1) Square #1; (1) Square #2; (1) T25; (1) 1/4", 5/16", 3/8" nutsetter; (1) 3" magnetic holder. Bits feature aggressive diamond?ground tips for fast drilling,  optimal flute design for fast dust removal and a shortened carbide tip that allows dust to move into the flute quickly reducing build up. Includes (1) one each: 5/32"x6", 3/16"x6", 1/4"x6", 3/8"x6", and 1/2"x6".
Dewalt DW2163 Screwdriver Bit Set Irwin 1881078 1-Piece Impact Drill Bit Set Artu 1440 Porcelain Tile Bit
The strength and durability of heat treated screw and nutdriver bits with the advanced hardening process provides higher torque and improved driving power. Includes: (10) of the most-needed #2 Phillips bit tips, Power bits, square recess bits, and a double ended # Phillips/#8 slotted bit, (2) nut drivers, (1) hex wrench set, (1) magnetic drive guide, (1) compact magnetic drive guide and tough, locking case to keep bits organized. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM.
Artu 1445 Porcelain Tile Bit SCRWDRVR TORQ BIT SET 25PC    Irwin 1866987 Fastener Drive Insert Bit Set
For rotary drilling only. 5/32 pilot bit must be used first. Ideal for drilling porcelain tiles up to a scratch hardness of 8. The drill bit will not walk, tape or center punching is no longer needed. Flat bottom parabolic flute ensures fast and efficient removal of drill dust and prevents clogging. Cuts nice, clean holes with very little or no chipping; Operate drill motor 400-600 RPM. CNC machined bit tip delivers a precise fit in screw heads for reducing cam-out. Extended FlexTorq zone transfers optimal torque for durability and longer life. Magnetic Screw Lock sleeve minimizes drops and reduces wobble. Impact rated, hex shank type. Includes: (7) 1" Phillips bits, (3) 1" Square bits, (3) 1" Torx bits, 1" Slotted bits, (3) 2" Phillips bits, (2) 2" Torx bits, 2" Square bit, 3-1/2" Phillips bit, Bit tip holder and Magnetic sleeve. Irwin Fastener Drive Insert Bit Set, Series: 1866987, 51 Pieces, Includes: (1) 2-1/4 in Bit Holder and (50) 1 in Screw Driving Bits; Philip Style (1) NO 0, (3) NO 1, (4) NO 2, and (3) NO 3. Square Style: (1) NO 0, (2) NO 1, (4) NO 2, (3) NO 3. Slotted Style: (1) 4-5, (1) 6-8, (2) 8-10, and (1) 10-12. Torx Style: (1) T10, (2) T15, (2) T20, (2) T25
DRILL BIT SDS-PLUS SET 5PC    BIT SCREWDRIVER SET 40PC      Dewalt DW2153 Impact Duty Screwdriver Bit Set
BIT SCREWDRIVER SET 40PC
Our Price: $24.65
Carbide tipped for long life in tough applications. Bit runs cooler thanks to improved flute design. Centric tip ensures quick starts in concrete. Wear mark alerts user when tip wears beyond ANSO specification. Optimized brazing and hardening process for long life. Bosch-made carbide tips are tougher and more durable under heavy loads. Set includes: (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 1/4" x 4" x 6", (1) 3/8" x 4" x 6" and (1) 1/2" x 4" x 6". Also includes a reusable rugged case. Includes 1" Insert Bits: #1 Phillips (2), #2 Phillips (7), #3 Phillips (2), #1 Square Recess (1), #2 Square Recess (5), #3 Square Recess (1), 6-8 Slotted (1), 8-10 Slotted (1), 10-12 Slotted (1), TORX: T10 (1), T15 (1), T20 (1), T25 (1), T27 (1), T30 (1), T40 (1), Hex Head: 3/32" (1), 7/64" (1), 1/8" (1), 9/64" (1), 5/32" (1), 3/16?"(1), 7/32" (1); 2" Power Bits: #2 Phillips (1), #3 Phillips (1), #2 Square Recess (1), #3 Square Recess (1); 2-1/4" Magnetic Bit Holder and case. For use with  impact drivers, cordless and corded hammer drills. Includes: #1 and #2 Phillips bits in 1" and 2", #2 and #3 Square bits, (4) four Torx bits, a magnetic bit tip holder and storage case.
Irwin 326023 Rotary Percussion Masonry Drill Bit DRILL BIT PERCUSN SET W/CS 5PC BIT INSERT HEX SET 9PC 1IN
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life. Includes: 3/16", 1/4", 5/16", 3/8", and 1/4" bits. Impact duty driver bits are engineered to be more durable and better fitting. The optimized ShockZone geometry is unique for each tip type to provide up to 30 times more torque. Precise custom machined tip prevents stripping and reduces wobble while the custom Alloy76 steel and proprietary heat treat process maximizes resistance to wear and shock.
Milwaukee 48-20-7490 Drill Bit Set Dewalt DW5249 Percussion Masonry Drill Bit BIT DRILL HAMMER KIT 7PC
BIT DRILL HAMMER KIT 7PC
Our Price: $28.20
Chisel shaped tip breaks concrete quickly for faster penetration. Four fluted spiral shaft has dust removal. Includes 3/16" x 4-1/2", 1/4" x 6", 5/16" x 6", 3/8" x 6", and 1/2" x 6". Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. The 3-flat secure grip shank fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. The bit provides superior performance through it reinforced flute geometry and carbide tip design. Delivers ideal quality in a select range of bits. Set includes: (1) 5/32" x 6" 3-flat secure grip hammer drill bit, (2) 3/16" x 6" 3-Flat Secure Grip hammer drill bit, (2) 1/4" x 6" 3-Flat Secure-Grip Hammer drill bit, (1) 5/16" x 6" 3-Flat Secure-Grip Hammer drill bit and (1) 3/8" x 6" 3-Flat Secure Grip Hammer drill bit.
Irwin 326027 Rotary Percussion Masonry Drill Bit DRILL/CHISEL BITS SDS-PLUS 6PC Milwaukee 48-32-1551 Driver Bit Set
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Carbide tipped for long life in tough applications. Centric tip ensures quick starts in concrete. Optimized brazing and hardening process for long life. Wear mark alerts user when tip wears beyond ANSO specification. Bit runs cooler thanks to improved flute design. Brute Tough storage case for easy access, organizing and portability. The set includes: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 3/8" x 4" x 6", (1) flat chisel and (1) point chisel. 42 piece set includes: (1) magnetic drive guide, (6) Phillips Bit 1" P2, (1) Phillips Bit 1" P3, (2) Phillips Bit 1" PR2, (1) Phillips Bit 2" P2,  (1) Phillips Bit 2" P3, (1) Phillips Bit 3-1/2" P2, (1) Slotted Bit 1" SL 1/8",  (1) Slotted Bit 1" SL 3/16", (1) Slotted Bit 2" 1/4", (2) Square Bit 1" SQ1, (6) Square Bit 1" SQ2, (1) Square Bit 1" SQ3, (1) Square Bit 2" SQ2, (1) Square Bit 2" SQ3, (1) Square Bit 3-1/2" SQ2, (1) Torx Bit 1" T10, (1) Torx Bit 1" T15, (1) Torx Bit 1" T20, (1) Torx Bit 1" T25, (1) Torx Bit 1" T30, (1) Torx  2" T15, (1) Torx Bit 2" T20, (1) Torx Bit 2" T25, (1) Hex Bit 1" 3/16" and (1) Hex Bit 1" 1/4". Engineered for extreme durability and long life. Made from proprietary steel and heat treated to control hardness. Feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. This set offers a variety of driver bits for everyday use, as well as rare applications.
Irwin 357030 Screwdriver Bit Set Dewalt DW5470 Masonry Hammer Drill Bit Set SwitchBlade 48-25-1252/48-25- Standard Self-Feed Wood Bit
Includes 1" insert bits: #1 Phillips(2), #2 Phillips(7), #3 Phillips(2), #1 square recess(1), #2 square recess(5), #3 square recess(1), 6-8 slotted(1), 8-10 slotted(1), 10-12 slotted(1); double end bits: #2/#2 Phillips(2), #2 square recess(1), 8-10 slotted(1); 2-9/16" magnetic nutsetters; 1/4"(2), 5/16"(1), 3/8"(1), 7/16"(1); 2-1/4" magnetic bit holder. Rock carbide tip for longer bit life and a 4 flute design that cleans debris out for fast, efficient drilling in concrete, masonry, artificial stone, and rock; fits into standard 3/8" and 1/2" chucks. Includes 3/16"x6-1/2", 1/4"x4", 1/4"x6", 3/8"x6", 1/2"x6" bits and case. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit.
SwitchBlade 48-25-1502/48-25- Standard Self-Feed Wood Bit SwitchBlade 48-25-1122/48-25- Standard Self-Feed Wood Bit SwitchBlade 48-25-1002 Standard Self-Feed Wood Bit
Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit.
Dewalt DW1631 Self-Feed Wood Bit Dewalt DW1634 Self-Feed Wood Bit Dewalt DW1630 Self-Feed Wood Bit
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention.
SwitchBlade 48-25-1752 Standard Self-Feed Wood Bit Dewalt DW1633 Self-Feed Wood Bit Speedbor Max 3046004 Self-Feed Wood Bit
Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit. Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws.
Speedbor Max 3046005 Self-Feed Wood Bit Dewalt Screwdriver Bit Set Impact Ready DWMTCIR20 Magnetic Tough Case Set
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Sleeve attaches to 2", 3.5" and 6" Flex Torq bits. Minimizes drops; reduces wobbling. Magnetic screw lock system. Durable, compact and functional storage solution for bits, hole saws and other common accessories. Two magnets on top of the lid allow users to adhere the case to any ferrous material, and the rubber bumpers prevent the case from sliding. Case conveniently fits into users' pockets or pouches or the built in hooks allow the case to hang anywhere making it easily accessible at all times. Includes: magnetic tough case, (2)-2" Phillips #2, (1)-2" square #2, (1)-1" Slotted #8, (4)-1" Phillips #2, (2)-1" Phillips #3, (1)-1" Square #1, (2)- 1" Square #2, (1)-1" T25, (1)- 1/4, 5/16, 3/8 nutsetters, (1)-1/8" & 1/4" impact drill bits, (1)-pivoting magnetic holder.
Speedbor Max 3046007 Self-Feed Wood Bit Speedbor Max 3046006 Self-Feed Wood Bit Speedbor Max 3046008 Self-Feed Wood Bit
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws.
Dewalt DW1635 Self-Feed Wood Bit SwitchBlade 48-25-2002/48-25- Standard Self-Feed Wood Bit SwitchBlade 48-25-2122/48-25- Standard Self-Feed Wood Bit
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit.
Speedbor Max 3046009 Self-Feed Wood Bit Dewalt DW1636 Self-Feed Wood Bit Dewalt DW1637 Self-Feed Wood Bit
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention.
Dewalt DW1639 Self-Feed Wood Bit Speedbor Max 3046010 Self-Feed Wood Bit SwitchBlade 48-25-2252/48-25- Standard Self-Feed Wood Bit
Two cutter design for maximum drilling efficiency and hole completion. Aggressive self-feed spur for faster drilling, 7/16" hex shank, shank flats for better retention. Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit.
Speedbor Max 3046011 Self-Feed Wood Bit Irwin 1840392 Impact Fastener Drive Set DRILL BIT PERCUSN SET 7/8X12IN
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Screwdriver set contains: (3) Impact insert bit #1 Phillips X 1'' OAL, (7) Impact insert bit #2 Phillips X 1'' OAL, (4) Impact insert bit #3 Phillips X 1'' OAL, (3) Impact insert bit #2 Square recess X 1'' OAL, (7) Impact insert bit #2 Square recess X 1'' OAL, (4) Impact insert bit #3 Square recess X 1'' OAL, (1) Impact insert bit T15 X 1" OAL, (1) Impact insert bit T20 X 1" OAL, (3) Impact insert bit T25 X 1" OAL, (1) Impact insert bit T27 X 1" OAL, (1) Impact insert bit T30 X 1" OAL, (4) Impact power bit #2 Phillips X 2" OAL, (2) Impact power bit #2 Square recess X 2'' OAL, (1) Impact power bit T20 X 2'' OAL, (1) Impact power bit T25 X 2" OAL, (1) Compact magnetic screw guide-3-1/16", (1) Impact nutsetter lobular magnetic 1/4" X 2-9/16" OAL, (1) Impact nutsetter lobular magnetic 5/16" X 2-9/16" OAL and (1) Impact nutsetter lobular magnetic 3/8" X 2-9/16'' OAL. Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life.
Speedbor Max 3046012 Self-Feed Wood Bit SwitchBlade 48-25-2562/48-25- Standard Self-Feed Wood Bit Dewalt Screwdriver Bit Set
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Removable and replaceable feed screw, cutting edges can be resharpened; 7/16" hex shank has flat surfaces for secure chuck grip. Used by electricians and plumbers in applications such as large hole drilling in wood. Includes: (2) two feed screws with each bit. Screw driving bit set. Sleeve attaches to bit tip holder. Reduces wobbling and minimizes drops. Magnetic screw lock system.
Speedbor Max 3046013 Self-Feed Wood Bit SwitchBlade 48-25-5150 Standard Self-Feed Wood Bit
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately; 7/16" Quick Change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Includes: Each bit is packaged with one hex key and two feed screws. Aggressive feed screw allows the bit to pull through the wood faster. Each bit comes standard with a second replacement blade made with hardened steel; size and model number engraved on each bit. Used by plumbers, HVAC contractors, electricians in applications such as drilling holes in all types of wood for pipe, vents, gas lines and bulk wire routing. Includes: 2-9/16" switchblade self-feed bit, (2) replaceable blades, (2) feed screws, (2) set screws, one (1) hex wrench.
   
 
1