Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > HAMMER STEEL BITS
Sort By:
1
Irwin 61108 Economy Light Duty Rotary Masonry Drill Bit Irwin 61112 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026000 Rotary Percussion Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Irwin 5026001 Rotary Percussion Masonry Drill Bit Irwin 61116 Economy Light Duty Rotary Masonry Drill Bit Irwin 5026002 Rotary Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit BIT MASONRY PERCUSSION 1/8X3IN
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Irwin 5026003 Rotary Percussion Masonry Drill Bit BIT MASONRY 5/32X4.5IN        Dewalt DW5222 Percussion Masonry Drill Bit
BIT MASONRY 5/32X4.5IN
Our Price: $3.23
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 61120 Economy Light Duty Rotary Masonry Drill Bit Dewalt DW5225 Percussion Masonry Drill Bit Western States 80240 Masonry Drill Bit
Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile.
BIT MASONRY PERCSN 3/16X3/8IN Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5227 Percussion Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Western States 80241 Masonry Drill Bit Dewalt DW5228 Percussion Masonry Drill Bit Secure-Grip 48-20-8810 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Western States 80242 Masonry Drill Bit BIT MASONRY PERCUSSION 1/4X4IN Bluegranite HCBG01 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Western States 80244 Masonry Drill Bit Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG03T/HCBG03 Hammer Drill Bit
Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Secure-Grip 48-20-8811 Hammer Drill Bit Western States 80243 Masonry Drill Bit Irwin 5026006 Rotary Percussion Masonry Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
BIT MASONRY PERCUSSION 1/4X6IN Western States 80245 Masonry Drill Bit Bluegranite HCBG04 Hammer Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Bluegranite HCBG06 Hammer Drill Bit Irwin 61124 Economy Light Duty Rotary Masonry Drill Bit BIT MASONRY PRCUSSION 5/16X6IN
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Tapcon 11256 Masonry Drill Bit Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 326005 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Tapcon 11248 Masonry Drill Bit Irwin 326001 Rotary Percussion Masonry Drill Bit Irwin 326002 Rotary Percussion Masonry Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Tapcon 11257 Masonry Drill Bit Tapcon 11247 Masonry Drill Bit Dewalt DW5402 Hammer Drill Bit
Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
Irwin 326008 Rotary Percussion Masonry Drill Bit Irwin 326003 Rotary Percussion Masonry Drill Bit Dewalt DW5417 Hammer Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
Dewalt DW5403 Hammer Drill Bit Irwin 326006 Rotary Percussion Masonry Drill Bit Dewalt DW5416 Percussion Hammer Drill Bit
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
BIT MASONRY IMP RDY 5/32X4X6IN Secure-Grip 48-20-8816 Hammer Drill Bit Dewalt DW5230 Percussion Masonry Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
BIT MASONRY PERCUSSION 3/8X6IN Tapcon 11363 Masonry Drill Bit Tapcon 11362 Masonry Drill Bit
Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Irwin 1870541 1-Piece Impact Masonry Bit Irwin 1870542 1-Piece Impact Masonry Bit 44 Magnum 48-20-7430 Hammer Drill Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
Irwin 1870543 1-Piece Impact Masonry Bit Irwin 5026009 Rotary Percussion Masonry Drill Bit Irwin 61128 Economy Light Duty Rotary Masonry Drill Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
Bluegranite HCBG09 Hammer Drill Bit Dewalt DW2572 Masonry Drill Bit Irwin 1870544 1-Piece Impact Masonry Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870545 1-Piece Impact Masonry Bit BLADE STL SMTH CUT 108TX6.5IN Irwin 326009 Rotary Percussion Masonry Drill Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Precision ground and sharpened teeth that can be resharpened. Hardened blade body. Designed for smooth cuts in plywood. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Dewalt DW2573 Masonry Drill Bit Irwin 1870546 1-Piece Impact Masonry Bit BIT MASONRY IMP RDY 3/16X4X6IN
Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction.
Bulldog HC2040 Rotary Hammer Drill Bit Irwin 1870547 1-Piece Impact Masonry Bit Dewalt DW5424 Hammer Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
Dewalt DW2574 Masonry Drill Bit Bulldog HC2041 Rotary Hammer Drill Bit BIT MASONRY IMPT RDY 1/4X4X6IN
Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction.
Dewalt DW5418 Hammer Drill Bit Irwin 322017 Standard Tip Hammer Drill Bit Irwin 11820ZR Combination Circular Saw Blade
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers. Heavy gauge high carbon steel for extended life with precision ground teeth for smooth, accurate cuts; fully hardened plate runs truer longer.
Secure-Grip 48-20-8821 Hammer Drill Bit Bulldog HCFC2040 Full Head Rotary Hammer Drill Bit Bulldog HC2011 Rotary Hammer Drill Bit
Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
Dewalt DW5427 Hammer Drill Bit 44 Magnum 48-20-7431 Hammer Drill Bit BIT MASONRY PERCUSSION 1/2X6IN
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Negative carbide tip for rotary and percussion drilling. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
Dewalt DW5401 Hammer Drill Bit Irwin 322002 Standard Tip Hammer Drill Bit Irwin 61132 Economy Light Duty Rotary Masonry Drill Bit
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers. Rotary percussion bits made of chrome vanadium shaft through hardened to 50-53HrC. Shot-peened, double tempered finish reduces breakage, copper braze material gives high heat resistance and flute geometry removes dust from the hole quicker for fast drilling and long life. Used in applications such as rotary drilling in concrete, brick and masonry.
44 Magnum 48-20-7411 Hammer Drill Bit Irwin 50128 Percussion Masonry Drill Bit Irwin 322004 Standard Tip Hammer Drill Bit
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
Irwin 326011 Rotary Percussion Masonry Drill Bit Tapcon 1870565 1-Piece Impact Drill Bit Tapcon 1870567 1-Piece Impact Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 11220 Combination Circular Saw Blade Bluegranite HCBG12 Hammer Drill Bit Secure-Grip 48-20-8800 Hammer Drill Bit
Heavy gauge high carbon steel for extended life with precision ground teeth for smooth, accurate cuts; fully hardened plate runs truer longer. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Dewalt DW5234 Percussion Masonry Drill Bit 44 Magnum 48-20-7410 Hammer Drill Bit Bulldog HCFC2041 Full Head Rotary Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
Bulldog HC2010 Rotary Hammer Drill Bit Artu 1006 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8801 Hammer Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Tapcon 1870566 1-Piece Impact Drill Bit Tapcon 1870568 1-Piece Impact Drill Bit Tapcon 1870569 1-Piece Impact Drill Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Bulldog HCFC2011 Full Head Rotary Hammer Drill Bit Secure-Grip 48-20-8805 Hammer Drill Bit Artu 1014 1-Piece Concrete Screw Drill Bit
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.
Bulldog HC2061 Rotary Hammer Drill Bit Dewalt DW5235 Percussion Masonry Drill Bit Secure-Grip 48-20-8806 Hammer Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip.
Irwin 322024 Standard Tip Hammer Drill Bit 44 Magnum 48-20-7451 Hammer Drill Bit Bulldog X5L Rotary Hammer Drill Bit
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
Bulldog HC2051 Rotary Hammer Drill Bit 44 Magnum 48-20-7401 Hammer Drill Bit 44 Magnum 48-20-7441 Hammer Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal.
BIT HMR DRILL 2CT 1/4X6X8IN   Artu 1011 1-Piece Concrete Screw Drill Bit Irwin 322022 Standard Tip Hammer Drill Bit
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers.
Dewalt DW5226 Percussion Masonry Drill Bit Irwin 5026015 Rotary Percussion Masonry Drill Bit Dewalt DW5437 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone.
Bluegranite HCBG15 Hammer Drill Bit Artu 1021 1-Piece Concrete Screw Drill Bit Bulldog HC2042 Rotary Hammer Drill Bit
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
44 Magnum 48-20-7471 Hammer Drill Bit Simpson Strong-tie BIT3SURC3 Insert Bit Set Bulldog HC2000 Rotary Hammer Drill Bit
Bit has a multi faceted carbide insert which reduces the breakage possibility when drilling through re-bar and mesh, distinctive chisel shaped tip breaks concrete quickly for faster penetration and the four fluted spiral shaft has improved dust removal. Quik Drive, undersized square drive bits and wrench pack for screws and exterior grade coating. Includes: 3 Bits. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
Tapcon 11492 Percussion Drill Bit Artu 1023 1-Piece Concrete Screw Drill Bit Cobra 589U Masonry Drill Bit
The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 1-1/4 - 4" fastener length. Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Used in applications such as drilling in brick, cinder block and tile.
Bulldog HC2012 Rotary Hammer Drill Bit BIT HAMMER DRILL 1/4X10X12IN  Milwaukee 48-20-7092 Hammer Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Flute is designed for fast removal of the concrete dust from the hole. Bits have a carbide vacuum brazed to heat treated steel shanks. Fits hex 5/16" Condrive sleeve for Tap-Con screw system
Bulldog HC2001 Rotary Hammer Drill Bit Bulldog HCFC2042 Full Head Rotary Hammer Drill Bit Tapcon 11491 Percussion Drill Bit
Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring. The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 1-1/4 - 4" fastener length.
Milwaukee 48-20-7091 Hammer Drill Bit Dewalt DW5229 Percussion Masonry Drill Bit Irwin 5026011 Rotary Percussion Masonry Drill Bit
Flute is designed for fast removal of the concrete dust from the hole. Bits have a carbide vacuum brazed to heat treated steel shanks. Fits hex 5/16" Condrive sleeve for Tap-Con screw system Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Bulldog HCFC2061 Full Head Rotary Hammer Drill Bit BIT HMR DRILL 2CT 3/8X6X8IN   Bulldog HC2081 Rotary Hammer Drill Bit
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring. Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
Artu 1031 1-Piece Concrete Screw Drill Bit Secure-Grip 48-20-8830 Hammer Drill Bit Irwin 326015 Rotary Percussion Masonry Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Designed to fit in all 1/2" three jaw hammer-drill chucks. Reduces the possibility of the bit spinning in the chuck during heavy torsional loads. Flute geometry provides dust and debris removal. Self-centering tip. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Irwin 322031 Standard Tip Hammer Drill Bit Tapcon 11493 Percussion Drill Bit Irwin 326007 Rotary Percussion Masonry Drill Bit
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss; fits all SDS-plus and Hilti TE-C rotary hammers. The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 2 - 3 -1/2" fastener length. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Bulldog HCFC2012 Full Head Rotary Hammer Drill Bit Dewalt DW5361 Hammer Drill Bit Bluegranite HCBG16 Hammer Drill Bit
Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring. Rock carbide tip maximizes carbide surface contact for longer bit life while the U-flute cleans debris out for fast, efficient drilling. The hex shank interlocks with drive sleeve, allowing for quick change from drilling to driving. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5364 Hammer Drill Bit Dewalt DW5433 Hammer Drill Bit Bluegranite HCBG08 Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life while the U-flute cleans debris out for fast, efficient drilling. The hex shank interlocks with drive sleeve, allowing for quick change from drilling to driving. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 5026019 Rotary Percussion Masonry Drill Bit Bulldog HC2302 Rotary Hammer Drill Bit Bulldog HC2312 Rotary Hammer Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tipped bit head is harder and more resistant to extreme loads; 4-flutes for fast dust removal. For use in drills requiring SDS-plus shanks and Tapcon/Condrive systems, hex drive on bit fits into driver sleeve. Carbide tipped bit head is harder and more resistant to extreme loads; 4-flutes for fast dust removal. For use in drills requiring SDS-plus shanks and Tapcon/Condrive systems, hex drive on bit fits into driver sleeve.
Artu 1041 1-Piece Concrete Screw Drill Bit Dewalt DW5231 Percussion Masonry Drill Bit Bulldog HCFC2081 Full Head Rotary Hammer Drill Bit
Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Full head carbide tip lasts longer for faster drilling speed and less carbide wear; the centric conical tip guides bit through concrete, provides rounder holes. Wear mark alerts the user when bit has worn to a level inappropriate for precision anchoring.
Dewalt DW5241 Percussion Masonry Drill Bit Dewalt DW9053 Circular Saw Blade Cobra 589Z Masonry Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Ultra thin kerf, cordless steel saw blades are engineered to optimize the cutting performance of all DeWalt 5-3/8" and 6-1/2" cordless saws. For cutting paneling, plastics, vinyl siding and other thin materials. Alternate set teeth, -10/45 degree hook angle, .059" kerf. Used in applications such as drilling in brick, cinder block and tile.
Dewalt DW5236 Percussion Masonry Drill Bit BIT HAMMER DRILL 5/8X4X6IN    Irwin 326019 Rotary Percussion Masonry Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Dewalt DW5430 Hammer Drill Bit BIT HAMMER DRILL 3/4X4X6IN    BIT HMR DRILL 2CT 3/8X10X12IN
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users.
Dewalt DW5446 Hammer Drill Bit BIT HMR DRL 2CT 9/16X4X6-1/2IN Bluegranite HCBG20 Hammer Drill Bit
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Dewalt DW5442 Hammer Drill Bit Irwin 326012 Rotary Percussion Masonry Drill Bit Dewalt DW5350 Cold Chisel Bit
Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Fully hardened steel body for increased life and durability; used for breaking to a straight line as in removing a section of sidewalk. 3/4" width. Weight .570 lbs.
Dewalt DW5348 Chisel Bit Dewalt DW5439 Hammer Drill Bit Tapcon 11249 Masonry Drill Bit
Hardened core reduces breakage; for use in masonry applications. Fits all brands of SDS plus rotary hammers. Bit has elongated four flute helix for faster material removal and three flats on the shank that prevent it from slipping back into the chuck. Used for drilling small holes in masonry, concrete, rock and artificial stone. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
BIT CHISEL FLAT SDS 3/4 X 10IN Bosch HS1913 Chisel Bit SDS Max Shank Bosch HS1911 Flat Chisel Bit
New inductive hardening process for higher quality. Chisel offers higher wear resistance and longer life. Chisel design disperses energy of each impact. Fits Bosch SDS-max hammer and competitive SDS-max drive hammers for use in masonry/concrete drilling. Faster demolition which increases overall jobsite productivity in applications such as masonry/concrete drilling. Fits Bosch SDS-max hammer and other SDS-max drive hammers also fits Hilti hammers using TE-Y and TE-EY shanks; 1" width.
Irwin 5026021 Rotary Percussion Masonry Drill Bit Bulldog HC2064 Rotary Hammer Drill Bit Dewalt DW5242 Percussion Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
BIT HAMMER DRILL 5/8X4X6IN    BIT HAMMER DRILL 3/8X10X12IN  Tapcon 11250 Masonry Drill Bit
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.
Bosch Bulldog Wide Flat Point Chisel Hammer Bit BIT CHISEL TILE SDS-PLUS      Bulldog HC2054 Rotary Hammer Drill Bit
For concrete and masonry demolition. Proprietary heat treat process. 10" long with 3/4" hex shank. Specially shaped for prying and removing tiles in one piece. Removes tiles at a faster rate with less effort. Flat spade design creates a self-sharpening edge, eliminating downtime. Ideal for smaller grout joints. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal.
BIT HMR DRILL 2CT 1/2X10X12IN Bulldog HC2084 Rotary Hammer Drill Bit Bluegranite HCBG18T/HCBG18 Hammer Drill Bit
Durable 2-Cutter bits with up to 20 percent more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements and a reinforced flute for durability and minimized vibration. The increased drill bit line provides ideal solution in general concrete for cordless and corded rotary hammer users. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 326016 Rotary Percussion Masonry Drill Bit Bulldog HC2102 Rotary Hammer Drill Bit Dewalt DW5244 Percussion Masonry Drill Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Carbide-tipped for resistance to extreme loads, centric tip for optimal hole geometry and 4-flutes provide fast dust removal. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Irwin 322026 Standard Tip Hammer Drill Bit BIT BULL POINT SDS-PLUS 10IN