Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > SPLINE PERCUSSION BITS
Sort By:
1
BIT DRILL MASONRY 1/4X6IN     Tapcon 1870565 1-Piece Impact Drill Bit Tapcon 1870567 1-Piece Impact Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 5026005 Rotary Percussion Masonry Drill Bit Irwin 1870541 1-Piece Impact Masonry Bit Irwin 1870542 1-Piece Impact Masonry Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Tapcon 1870566 1-Piece Impact Drill Bit Irwin 1870543 1-Piece Impact Masonry Bit Irwin 1870544 1-Piece Impact Masonry Bit
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 1870545 1-Piece Impact Masonry Bit Irwin 1870546 1-Piece Impact Masonry Bit Irwin 1870547 1-Piece Impact Masonry Bit
Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
BIT MASONRY IMPT RDY 1/4X4X6IN Irwin 5026008 Rotary Percussion Masonry Drill Bit Dewalt DW2572 Masonry Drill Bit
Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rated. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping.
Tapcon 1870568 1-Piece Impact Drill Bit Tapcon 1870569 1-Piece Impact Drill Bit BIT MASONRY IMP RDY 5/32X4X6IN
Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Impact Tapcon installation bit. Built-in hex collar serves as a stop feature for drilling the perfect hole depth for Tapcon screws and other concrete screws. Drill/drive installation sleeve slides over bit and engages with hex collar to quickly drive hex or Phillips head fasteners. One-piece construction withstands higher torque loads than standard quick-change bits. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. For use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction.
Dewalt DW2573 Masonry Drill Bit BIT MASONRY IMP RDY 3/16X4X6IN Dewalt DW2574 Masonry Drill Bit
Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping. Innovative flute design leading to faster material removal for easier drilling. Speed tip penetrates materials quickly. 1/4" hex shank for use in impact drivers. 2 cutter heads. Impact ready. Percussion rates. Carbide tipped cutting edge material. Flute Length: 4". Overall Length: 6". Shank Size: 1/4". For tap con installation and brick block fastening. Forward cutting direction. Carbide tipped bit with rapid load quick change used in applications such as drilling in brick, block and concrete; 1/4" universal hex shank prevents slipping.
BIT HAMMER DRILL 1/4X10X12IN  Irwin 5026013 Rotary Percussion Masonry Drill Bit BIT DRILL MASONRY 3/8X13IN
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block.
Irwin 5026011 Rotary Percussion Masonry Drill Bit Irwin 326007 Rotary Percussion Masonry Drill Bit Bluegranite HCBG08 Hammer Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
Irwin 5026016 Rotary Percussion Masonry Drill Bit Dewalt DW5226 Percussion Masonry Drill Bit BIT CHISEL FLAT SDS 3/4 X 10IN
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. New inductive hardening process for higher quality. Chisel offers higher wear resistance and longer life. Chisel design disperses energy of each impact.
BIT DRILL MASONRY 1/2X13IN    Dewalt DW5229 Percussion Masonry Drill Bit Irwin 5026020 Rotary Percussion Masonry Drill Bit
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
Dewalt DW5231 Percussion Masonry Drill Bit Dewalt DW5350 Cold Chisel Bit Dewalt DW5348 Chisel Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Fully hardened steel body for increased life and durability; used for breaking to a straight line as in removing a section of sidewalk. 3/4" width. Weight .570 lbs. Hardened core reduces breakage; for use in masonry applications. Fits all brands of SDS plus rotary hammers.
Irwin 326012 Rotary Percussion Masonry Drill Bit Bosch HS1913 Chisel Bit SDS Max Shank Bosch HS1911 Flat Chisel Bit
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Fits Bosch SDS-max hammer and competitive SDS-max drive hammers for use in masonry/concrete drilling. Faster demolition which increases overall jobsite productivity in applications such as masonry/concrete drilling. Fits Bosch SDS-max hammer and other SDS-max drive hammers also fits Hilti hammers using TE-Y and TE-EY shanks; 1" width.
BIT HAMMER DRILL 3/8X10X12IN  BIT DRILL MASONRY 5/8X13IN    Bosch Bulldog Wide Flat Point Chisel Hammer Bit
The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. For concrete and masonry demolition. Proprietary heat treat process. 10" long with 3/4" hex shank.
BIT CHISEL TILE SDS-PLUS      Bluegranite HCBG18T/HCBG18 Hammer Drill Bit Dewalt DW5236 Percussion Masonry Drill Bit
Specially shaped for prying and removing tiles in one piece. Removes tiles at a faster rate with less effort. Flat spade design creates a self-sharpening edge, eliminating downtime. Ideal for smaller grout joints. Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Dewalt DW2571 Rotary Drill Bit Set Irwin 326016 Rotary Percussion Masonry Drill Bit Irwin 326020 Rotary Percussion Masonry Drill Bit
Carbide tipped for applications such as drilling in brick, block and concrete, rapid load quick change; universal 1/4" hex shank prevents slipping. Includes (1) one each: 5/32", 3/16", and 1/4" bits. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT BULL POINT SDS-PLUS 10IN  BIT DRILL MASONRY 3/4X13IN    BIT HAMMER DRILL 1/2X10X12IN
Designed for concrete material removal. For use in chipping hammers and rotary hammers with stop rotation. Sharp point for maximum impact. Chisel offers longer life and more material removal for faster work rate. Positive tip geometry for best rotary drilling efficiency. All sizes 3/16" and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. The Milwaukee 3-Flat Secure Grip hammer drill bit drills faster and lasts longer. Fits in all 1/2" three-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications. Reinforced flute geometry increases bit stability. Carbide tips extend performance in masonry applications.
Bosch HS1912 Flat Chisel Bit Bosch HS1812 Flat Cold Spline Chisel Bit Dewalt DW5242 Percussion Masonry Drill Bit
Faster demolition which increases overall jobsite productivity in applications such as masonry/concrete drilling. Fits Bosch SDS-max hammer and other SDS-max drive hammers also fits Hilti hammers using TE-Y and TE-EY shanks; 1" width. Used for general chipping work in applications such as masonry/concrete drilling; fits competitive spline drive hammers and round hex hammers; 1" wide with 3/4" hex. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
Bluegranite HCBG21 Hammer Drill Bit Dewalt DW5245 Percussion Masonry Drill Bit Irwin 1881078 1-Piece Impact Drill Bit Set
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads. Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. One-piece construction withstands higher torque loads than standard quick-change bits. Black oxide finish resists corrosion and increases life of bit. 1/4" quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.
Irwin 5026022 Rotary Percussion Masonry Drill Bit Bosch HS1916 Wide Flat Scaling Chisel Bit Vermont 14053 Masonry Drill Bit
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks. Used in applications such as masonry/concrete drilling; fits Bosch SDS-max hammer ,Hilti hammers using TE-Y and TE-EY shanks and other SDS-max drive hammers; 12" long. The double flute drills fast while carbide tip minimizes wear and extends the life of the bit. Used in applications such as drilling in brick, cinder block and tile with corded or cordless rotary drills.
Dewalt DW5349 Scaling Chisel Bit Irwin 326023 Rotary Percussion Masonry Drill Bit Bosch HS1915 Scraping Chisel Bit
Used in applications such as chipping or chiseling tough materials, made of hardened steel for long life and job endurance; 1-1/2" chisel tip with slotted drive shaft (SDS) hammers. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Used in applications such as scraping or removing tile from a concrete floor. Fits Bosch SDS-max hammer, other SDS-max drive hammers and Hilti hammers using TE-Y and TE-EY shanks; 2" wide.
Bosch Brute Breaker Hammer Bit Bosch HS1910 Wide Flat Scaling Chisel Bit Irwin 326027 Rotary Percussion Masonry Drill Bit
Used for general chipping work.External collar for use with standard pneumatic hammers; 1-1/8" hex collar. Internal lock for Bosch hammer 11304. Used in applications such as masonry/concrete drilling; fits Bosch SDS-max hammer ,Hilti hammers using TE-Y and TE-EY shanks and other SDS-max drive hammers; 12" long. Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
Dewalt DW5249 Percussion Masonry Drill Bit Bosch HS1810 Wide Flat Drive Scaling Chisel Bit Irwin 324011 Standard Tip Hammer Drill Bit
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck. Two 60 degree cutting angles used in applications such as clean concrete, scale and rust. For all rotary and demolition hammers with spline or 21/32" round tool holder; 3" wide with 3/4" hex shank. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Bosch Bulldog Xtreme Self-Sharpening Wide Chisel Hammer Bit Bosch Brute Narrow Chisel Hammer Bit Speedx HC4501 Rotary Hammer Drill Bit
For concrete and masonry demolition. Proprietary heat treat process. 10" long with 3/4" hex shank. Used to start holes in concrete slabs; internal lock for Bosch hammer 11304, external collar for use with standard pneumatic hammers; 1-1/8" hex collar. The carbide tipped bit head is harder and more resistant to extreme loads. Fits Bosch as well as other spline hammers.
Irwin 324005 Standard Tip Hammer Drill Bit Irwin 324012 Standard Tip Hammer Drill Bit Irwin 324001 Standard Tip Hammer Drill Bit
Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Irwin 324004 Standard Tip Hammer Drill Bit Irwin 324019 Standard Tip Hammer Drill Bit Speedx HC4511 Rotary Hammer Drill Bit
Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. The carbide tipped bit head is harder and more resistant to extreme loads. Fits Bosch as well as other spline hammers.
Irwin 324018 Standard Tip Hammer Drill Bit Bosch Brute Wide Chisel Hammer Bit DRILL BIT PERCUSN SET 7/8X12IN
Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Two (2) 60-degree cutting angles used in applications such as cleaning concrete, scale, rust or cutting troughs and some asphalt;  3" wide with 1-1/8" hex collar. Use to power through masonry, concrete, rock, and more with DEWALT Hammer Drill Bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a four flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Two cutter carbide tip maximizes carbide surface contact for longer bit life.
Irwin 324025 Standard Tip Hammer Drill Bit Irwin 324029 Standard Tip Hammer Drill Bit Irwin 324026 Standard Tip Hammer Drill Bit
Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Speedx Wild-Bore 4-Cutter Head Rotary Hammer Drill Bit Speedx Wild-Bore 4-Cutter Head Rotary Hammer Drill Bit Irwin 324028 Standard Tip Hammer Drill Bit
Bits feature have extra strength tip for longer life and faster drilling. The Quadro-X 4 cutter head provides fast, accurate drilling and true round holes for anchors. Bits feature have extra strength tip for longer life and faster drilling. The Quadro-X 4 cutter head provides fast, accurate drilling and true round holes for anchors. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Speedx Wild-Bore 4-Cutter Head Rotary Hammer Drill Bit Bosch HS1922 Clay Spade Bit Irwin 324035 Standard Tip Hammer Drill Bit
Bits feature have extra strength tip for longer life and faster drilling. The Quadro-X 4 cutter head provides fast, accurate drilling and true round holes for anchors. Round shank fits SDS MAX hammer drills and large Hilti hammer drills with round shank; 4-1/2" clay spade bit for general gardening and landscaping. Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53HrC. Fits all spline rotary hammers.
Bosch Brute Clay Spade Bit
Used in applications such as digging in clay, hard packed gravel or dirt. External collar for use with standard pneumatic hammers, internal locks for Bosch hammer 11304;  5-3/8" with 1-1/8" hex collar.
   
 
1